Manage Distribution Edit Installer problem

I am using Labwindows 8.1
I have a small project that I am having problems building. When I go into the Manage Distributions, click edit and then go to Drivers & Components, there are several components checked that are not needed . I am not sure how they got checked. I am unable to uncheck them.
For example the:
NI LabView Run-Time Engine 2009 SP1 has a gray check mark in the checkbox. I am unable to uncheck it.
Nothing in my project uses this so I am not sure how it got checked.
How do I uncheck the unwanted components?
How did they get checked in the 1st place?
On a few of the checked components, the path it expects is a bogus path, I have no idea why it wants to point to the path.
Example: NI I/O Trace 3.0.2 is pointing to a directory on our company share drive: F:Groups\Engineering Transfer\Software Release\VATS which is for a totally separate release for another labwindows project.
Please help!
Thanks!
John W.

Thanks for the reply,
Attached are screen shots of the Drivers and Componenets and also my project tree and the only file that has external include files.
The project is fairly simple. The application chooses a particular board to communicate with. It sends test commands via either serial port, parrallel port, gpib, or usb/serial to the board and the board does the test commanded and then returns status.
The path for the NI LabView components is now C:\program Files\National Instruments\Shared\ProductCache
They were pointing to a folder on our shared drive, but I changed the path to the above. I was able to build the project successfully.
It seems the paths changed to the bogus path when I created a project folder for a completely different project and ran the setup. The path for this new project is what this projects NI LabView components were pointing to.
The C:\program Files\National Instruments\Shared folder is the only area I know of on my computer that any Labview related files reside.
It works but I still would like to understand why these LabView components are checked.
I am using Labwindows 8.1, windows XP
Thanks!
John W.
Attachments:
Drivers & Components 1.gif ‏28 KB
Drivers & Components 2.gif ‏27 KB
Project Tree and Include files.gif ‏64 KB

Similar Messages

Oracle 10g Express Edition installation problem in windowsXP

while installing the Oracle 10g Express Edition in windows XP ,
it is showing an error like this ,
the cabinet file 'Data1.cab' required for this installation is corrupt and cannot be used. This could indicate a network error.
If anybody knows solution to this problem plz mail me to this email id
[email protected]

I think you should probably download the file again, it might be corrupt.
~Jer

SAP Inventory Manager 4.0 installation problems

I am having problems when trying to install the new version of Inv Manager 4.0 on windows server 2008. The installation is performed by first installing and patching to latest release an SMP 3.0 server, followed by an installation of the SAP Inventory Manager 4.0.0 Deployment exe file. That installation runs without any errors but no app is visible on the SMP, no folders or shortcuts or other indications are visible that it was successful. Also very strange is that according to the installation guide there are some steps (1-6) which I cannot see, my install runs jumps directly from step 3 step nr. 7 (serial numbers, install type, keys are all missing or not requested by the installation for some reason). I have installed this on 4 different servers/PC´s where at least 2 of those were totally fresh systems that didn´t have any previous installation of either Agentry or SMP. The prerequisites are met (java, jco etc) but what puzzles me the most is that I don´t see any logs or error messages.
Help is much appreciated

Bjorn,
At very high level...
1) Install SMP Server with Latest support pack. you don't need to enter any server serial numbers details.
2) Logon to SMP Management cockpit.
3) create Agentry application for Inventory Manager and save it.
4) Once Agentry application is created under server->configuration folder you can see a folder created.
Server\configuration\com.sap.mobile.platform.server.agentry.application.
5) Execute SAPInventoryMgr400Deployment.exe by entering SAP back end connection details.
6) Once you complete step 5), you have IM 4.0 deployment application is created. at this point you can copy all the deployment folder contents to application folder created in step 4) or do publish from editor or follow step 5.
5) Select Agentry application ->go to App Specific settings tab ->Under publish option "upload your Inventory Manager deployment zip file" and save the changes.
6) Re-start the Server.
7) Test if your application is deployed correctly by entering URL in the browser https ://<hostname>:8081/<appname> . you should get response as 'I'm here".
8) if step 7) is not successful then troubleshoot Agentry app deployment ( turn on agentry logging and check for startup errors ).
check this thread for SMP 3.0 Server Installation troubleshooting.
Query on SMP 3.0 - Working with Agentry Client
Thanks,
Manju.

Solution: Hercules DJ Console MK2 Mac Edition Installation Problems

hi
if anyone has problems installing the hercules dj console MK2 MAc Edition under Leopard 10.5.0:
Hercules:
A temporary solution to install today's drivers in Mac OS 10.5 (we will release soon a new installer for Mac OS 10.5) consists in:
1) Display the installation package .pkg file (right click the file with Ctrl-click) and select ShowPackage Contents,
2) Enter in Contents/Resource and delete the file InstallationCheck,
3) Run the installation package again, and this time the installation will run OK in Mac OS 10.5.

Welcome to Apple Discussions:
Since you say this happens with mail, and other apps, it's probably not related to your Hercules system directly.
When you run the Mac by itself, with everything else unplugged, do you get the spinning beachball much?
You may need to run the disk utility and repair the HD and the permissions.
It's also possible that some 3rd party SW you may have installed is causing the problem. Be sure all 3rd party SW is fully compatible with Leopard and has been tested with the latest versions.
Check your console logs for information about this, and also run the Activity Monitor to see if something is taking up a lot of CPU ticks.

Oracle 10g Express Edition, Installation Problem

After run
# /etc/init.d/oracle-xe configure
Oracle Database 10g Express Edition Configuration-------------------------------------------------This will configure on-boot properties of Oracle Database 10g ExpressEdition. The following questions will determine whether the database shouldbe starting upon system boot, the ports it will use, and the passwords thatwill be used for database accounts. Press <Enter> to accept the defaults.Ctrl-C will abort.
Specify the HTTP port that will be used for HTML DB [8080]:8080
Specify a port that will be used for the database listener [1521]:1521
Specify a password to be used for database accounts. Note that the samepassword will be used for SYS, SYSTEM and FLOWS_020100. Oracle recommendsthe use of different passwords for each database account. This can be doneafter initial configuration:Confirm the password:
Do you want Oracle Database 10g Express Edition to be started on boot (y/n) [y]:y
Configuring Database...Starting Oracle Net Listener.Starting Oracle Net Listener.Starting Oracle Database 10g Express Edition Instance.
//error msg gos here
Failed to start Oracle
Net Listener using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr and Oracle Express Database using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/sqlplus.
in the orcale-xe service, some message shows:
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/lsnrctl: relocation error: /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/../lib/libclntsh.so.10.1: symbol semtimedop, version GLIBC_2.3.3 not defined in file libc.so.6 with link time reference
OS: Linux RH9
is that glibc version's problem? mine is glibc_2.3.2
how to make it?
thank u .

Hello,
I have the same problem on RH9.
[root@phpsrv init.d]# ./oracle-xe start
Starting Oracle Net Listener.
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/lsnrctl: relocation error: /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/../lib/libclntsh.so.10.1: symbol semtimedop, version GLIBC_2.3.3 not defined in file libc.so.6 with link time reference
Starting Oracle Database 10g Express Edition Instance.
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/sqlplus: relocation error: /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/../lib/libclntsh.so.10.1: symbol semtimedop, version GLIBC_2.3.3 not defined in file libc.so.6 with link time reference
Failed to start Oracle Net Listener using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr and Oracle Express Database using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/sqlplus.
Regards,
Pavel Kucera

SQL Server 2012 Developer Edition Installation Problem

Hi,
I have just been given a new PC by my IT department so am trying to get all the software I need onto the PC. Since I am now running windows 7 I wanted to try SQL Server 2012, however whenever I go to install it, one of the checks always fails as follows:-
SetupCompatibilityCheck
Checks whether the current version of SQL Server is compatible with a later installed version.
This version is not compatible with a later installed version. For more information, see the compatibility information at http://go.microsoft.com/fwlink/?LinkId=160850.
All other checks are successful but no matter whether I use the MSDN disc the software is on or the downloaded copy, the software doesn't seem to like my PC. I don't understand how the software can believe there is something
newer than SQL Server 2012 on the system. When I run the discovery tool elsewhere in the installer it reports that nothing is installed.
Is anyone able to give me some information on what might be triggering this? I did install Visual Studio 2008 and Visual Studio 2010 on the system prior to this, as well as SQL Server 2008 R2, but I have since removed all of these products again in order
to try and identify the cause of this problem. Now with nothing left on the system again, it still reports this same error. Could it be something is left over from those installations that is causing this problem?
Any help would be much appreciated
Regards
Paul

(07) 2012-08-14 09:04:37 Slp: Initializing rule      : SQL Server Setup Product Incompatibility
(07) 2012-08-14 09:04:37 Slp: Rule is will be executed : True
(07) 2012-08-14 09:04:37 Slp: Init rule target object: Microsoft.SqlServer.Configuration.SetupExtension.SetupCompatibilityCheck
(07) 2012-08-14 09:04:37 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
(07) 2012-08-14 09:04:37 Slp: Value cannot be null.
Parameter name: version
(07) 2012-08-14 09:04:37 Slp:    at System.Version..ctor(String version)
   at Microsoft.SqlServer.Configuration.SetupExtension.SetupCompatibilityCheck.Microsoft.SqlServer.Configuration.RulesEngineExtension.IRuleInitialize.Init(String ruleId)
   at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.Execute(Boolean stopOnFailure)
(07) 2012-08-14 09:04:37 Slp: Rule initialization failed - hence the rule result is assigned as Failed
Hi Paul,
Any progress?
This issue you met may be due to there are still registry keys left related to the SQL Server, even though we have uninstalled the SQL Server.
To fix the issue, we can remove the left keys manually:
1. Click 'Start' > 'Run' > type 'regedit' > press Enter key.
2. Backup this registry keys that related to SQL Server under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall
3. Delete keys that relate to SQL Server under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall.
4. Restart the setup installation.
If you have any problem, please feel free to let me know.
Thanks,
Maggie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. This can be beneficial to other community members reading the thread.

Java Edition installation problem

Hello,
For the Full Java Edition System Requirements, it says i should remove an entry for the ports 3601, 3201 and 50000 to 50030. But in my services file, i have that entry for the port 3201 as follows:
   sapdp01          3201/tcp
I am not sure if i encounter any serious problem when i remove this line?
Best Regards,
Serafettin

HI,
You can either remove these entries or you can change the SCS no and CI no so that there are no conflicts. To elucidate let us assume that you are installing a NW04 system, SID J2E, now it would ask you to enter the CI number. Here you have an option to change the SCS number, as the message and enque server depends on SCS number for their port definition.
Eg: SID J2E
     JC00
     SCS01
then the message server port incase of NW04 would be 3601 and enque server would be 3201.
YOu just have to make sure that you have changed it tp avoid any conflict
Reward, If sounds good

NW04s Java Full Edition Installation Problem

Hi All,
I am in the process of installing Netweaver 2004s SP7 sneak preview on Windows XP environment(standalone laptop - Pentium 1.8GHz, 1.5gb RAM, 80Gb HD). It gets stalled at Step 15 of 31 which is Creating database schema. Another interesting thing we noticed is that during this step is that CPU reaches 100%. It shows the below message in the Trace.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Call block:Sdb_Schema_ind_ind_ind_ind
function:Sdb_Schema_ind_ind_ind_ind_SubComponentContainer_CreateDbSchema
is validator: false
This problem was already put by Tarun, but there is no detail on how he solved that problem.
Please help me in solving this problem.
Thanks
Sathish

Hi Satish,
I am also facing the same problem. We are using Windows XP Professional with 1GB RAM and 2.8 GHz processor. The task manager is showing 100% CPU usage. The SAPInst process is taking up 99% of the CPU load but only occupying 1M of RAM. The java process is taking up 107MB of memory. Do you by any chance found a solution to the problem?
Thanks,
Subhabrata

Oracle 8i Personal Edition installation problem

Hello,
I am having problem with installing Oracle 8i PE , This is a downloaded version from the Web that I downloaded it was in a zip format so I expanded the zip files using the Norton utilities, and saved it in a folder on the deskstop, And from that folder whenever I try to run the Autorun icon it takes me to the install and uninstall page but when ever I click the install button, It say " Unable to install, Please check or verify the file path" and shows the current path the folder is in.
Can some please tell me how to get is install properly, I really appericate your help.
Thanks Deb...

<BLOCKQUOTE>quote:<HR>Originally posted by Deb Nag ([email protected]):
Hello,
I am having problem with installing Oracle 8i PE , This is a downloaded version from the Web that I downloaded it was in a zip format so I expanded the zip files using the Norton utilities, and saved it in a folder on the deskstop, And from that folder whenever I try to run the Autorun icon it takes me to the install and uninstall page but when ever I click the install button, It say " Unable to install, Please check or verify the file path" and shows the current path the folder is in.
Can some please tell me how to get is install properly, I really appericate your help.
Thanks Deb... <HR></BLOCKQUOTE>
null

Oracle 8 personal edition - Installation problem

Dear Sirs,
I want install on windows xp the database Oracle 8 Personal Edition.
I select to install only the database standard without the reply.
Start the installatin and when dependency analysis oracle give the error:
stopsrvc.vrf{78}: Type mismatch in argument '0' when calling 'contains'
stopsrvc.vrf{78}: 'STRING' expected when 'LIST' found.
Can you help me?
I know that this version of DB is not supported. But I must a test.

This combination, to my knowledge, was never certified. If I am not wrong, you need to find a Windows 98 SE/2000 setup for running this personal edition successfully.

SAP Netweaver slim Edition - Installation problem-local host!!!!!!!

Trying to run inst file, it gives me the following error message when I specify the localhost.
ERROR 2006-02-12 09:23:48
<html>The name of this host is E58AEB3F9A6342E which is more than 13 characters long.This is not supported for SAP server installations (see SAP Note 611361).</html>
Please share your experiences or knowledge on this issue.
thanks

Welcome to SDN.
Change your computer name to something less than 13 characters.
(mycomputer ->properties->computer name)
Regards
Raja

WINDOWS INSTALLER PROBLEM WITH DESKTOP MANAGER

Please help!! I am a user of the Blackberry Desk Top Manager, running under Windows XP Service Pack 4.5. I recently downloaded the latest version of Desk Top Manager and I am getting the following error: - Flashing intermittently, whilst running the newly downloaded Desktop Manager - "Windows Installer Preparing to Install". I have removed the programme, downloaded it again from Blackberry's website and run my Windows updates to no available. I have now been advised that I must format my entire computer and reload Windows, which seems to be a rather onerous solution, as I have been using Blackberry's Synchronisation Programme for over a year successfully before this took place. I should appreciate it if you would let me know how this problem on my IBM Think Pad Laptop can be cured.

halimsujanto wrote:
Hi all..
I am having the same problem with desktop software 6, but my problem is more like this..
http://www.blackberry.com/btsc/KB19300
The Windows Installer pop-up during installation and cannot continue, it seems that windows installer 4.5 is the cause, but I cannot uninstall windows installer 4.5 because many of my programs were using this..
In this knowledge base solution it says to run BlackBerry Desktop Software.msi, but on BlackBerry Desktop Software 6, it need to run from setup.exe and cannot continue.. so I cannot install desktop software 6 on my computer, but I am able to install older version desktop software ie. version 4.2 to version 5.
I think that I am gonna reply here instead of making new thread about windows installer 4.5 and Desktop Software 6, please move if I did wrong.
PS. Bifocals..
The link you provided is missing. Or it just back to BlackBerry Technical Solution Center page and I tried searching the KB13781 with no success.
Please if there is other link that may be good for my problem.
Thank you very much.
Hi ihalimsujanto and welcome to the forums!
My first concern is that you do have a version of desktop manager that you can maintain your device and PIM data with, do you?
Please post back with as much detail as possible regarding your hardware and software setup.
Also post what steps you have taken to resolve the issue. The more detail we have the better we can help you. I'll reread KB 19300 and find what happened to my broken link.
Thanks.
Bifocals
EDIT:
ihalimsujanto,
Please review this Microsoft Knowledgebase Article ID: 555175
How to resolve Common "Windows Installer" Problems
Methods 3 and 4 may be pertinent.
Let us know how it goes!
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Problem installing SQL Server 2012 SP1: "managed sql server installer has stopped working"

Hello,
I have a big problem.
I just downloaded SQL Server 2012 SP1 and I only want to install SSMS. The installer always crashes with an error message "managed sql server installer has stopped working".
I already tried all solutions from Google for this problem but nothing works.
Can someone help me plase?
My System: Window 8 Pro with Visual Studio 2012.
Thanks
Sven

Would you please uplaod/share SQL Server setup logs
C:\Program
Files\Microsoft
SQL Server\110\Setup
Bootstrap\Log\20130125_133342
to file sharing service like SkyDrive.com
FAQ
Regards,
Ahmed Ibrahim
SQL Server Setup Team
My Blog
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and "Vote as Helpful"
on posts that help you.
This can be beneficial to other community members reading the thread.

Installation problems with Application Manager

i get these errors:
ERROR: DF024: Unable to preserve original file at "/Applications/Adobe Illustrator CS6/Adobe Illustrator.app/Contents/Frameworks/AdobeCrashReporter.framework/AdobeCrashReporter" (Seq 1649)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 1649)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Illustrator CS6 Core: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Illustrator CS6 Core_AdobeIllustrator16nl_NLLanguagePack: Install failed
Can anybody help?

Hello Kapil,
Yes, the installation succeeded now. But now another problem emerges when I try to install the Creative Cloud updates. The errorlog tells me this:
Adobe Media Encoder CS6 6.0.2-update
Installation failed. Errorcode: U44M1P7
Adobe Extension Manager CS6-update
Installation failed. Errorcode: U44M1P7
Adobe CSXS InfrastructureCS6
Installation failed. Errorcode: U44M1P7
I really don't have a clue of what I can do here.

Solution Manager Enterprise Edition upgrade slow

Hi
I am performing SOMAN 7.0 upgrade to Enterprise edition by upgrading kernel 701 and SP stack 18. I have already upgraded the kernel and java stack and now in the process of upgrading ABAP. I am expereincing really slow performance of this upgrade. I have checked tp and R3trans version which is uptodate as I updated kernel. I cant see any problem with CPU utilization as well swapping. I checked the SLOGs and there are no alerting errors. I see its moving and its very slow. I am just wondering if any of you guys experienced this - is this normal since this is a upgrade?

Thanks a lot, i realize the installation following the standard add-on installation procedure!
Now i have the ST-ETP
ST     400     0024     SAPKITL434     SAP Solution Manager Tool
ST-A/PI     01M_CRM570     0000     -     Application Servicetools for CRM 500 - 7
ST-ETP     100     0000     -     SAP Solution Manager Enterprise Edition
ST-ICO     150_700     0025     SAPK-1507PINSTPL     SAP Solution Manager Implementation Cont
ST-LV     100     0001     SAPK-10001INSTLV     SAP Landscape Verification Wizard
ST-SER     701_2010_1     0002     SAPKITLOS2     SAP Solution Manager Service Tools
Then don't forget to perform step 5. After the installation steps.
Step 5 says this:
5. After the installation
              To activate SAP Solution Manager Enterprise Edition, the Enterprise Addon SM_APPLM has to be activated in the IMG of the Solution Manager System. This is done via IMG activity SAP Solution Manager->Configuration->Scenario-Specific Settings->Activate Solution Manager Enhancements.
            a) In the case of ST-400 SP15-SP17
            To use Extended Tracebility in Change Request Management activate BC-Set SOLMAN40_CHARM_CONTEXT_001 in transaction SCPR20
            b) In the case of ST-400 SP18 or higher
            The activation of BC-Set SOLMAN40_CHARM_CONTEXT_001 will be done automatically.
In my spro i don't have this options->
I see the route Activate Solution Manager Enhacements in SPRO -> Cross Scenario Settings
And in enterprise extension I only see ( SM_CRON, SM_QC_AD, SM_SSP,SM_SUPP_VAR)
I guess that this in SP24 is done automatically, but you said, that don´t forget the step 5 after installation.
update:I check for updates of SP and this add-on don´t have SP for now

Manage Distribution Edit Installer problem

Similar Messages

Maybe you are looking for