Manual Transition When Audio Attached?

Hi all,
hope someone can help me out.
Is there a reason I can't use 'Manual Transition' with a slide slow that has audio attached? It only seems to offer 'Fit to Audio' or 5, 10 secs etc as options.
Cheers....Scotty

Sorry to pop in, the youtube video you mention there was based on my post about micronavigation, and what you do here is mixing up things totally. You should add the code that you use for the Replay button as well, because if for the On Enter action of the slide you are capturing the slide number instead of the number of the first frame of that slide, you also have to change the Replay button code. Please post the code you are using there.
And moreover I find it much easier just to assign this advanced action to a Replay button, there is no real need for a user variable or an On Enter Slide event.

Similar Messages

Quicktime Export-loss of transitions when audio added

My Keynote 4.0.1 export to QT messes up transitions - only if I've added audio (recorded spoken word).
For example, in one slide, the 1st dissolve works fine, but the remaining elements that are supposed to enter or exit with dissolves (and one swoosh) just "appear" or "disappear".
All transitions work fine when being played in the Keynote document, and also export correctly to QT if I do not add audio. It's only after I've added audio that the problem occurs. I've tried several different codecs to see if that might be the issue, but no dice.
Has anyone else had this problem? Could anyone try duplucating it? I'm wondering if it's just my system and I ned to do a reinstall or if it's a general problem with Keynote export.

The same thing has happened to me repeatedly when I export Keynote presentations to QT: no audio!
I'll try reverting to version 4.0 to get rid of this most annoying bug.
Great to find your solution!
Cheers,
Luis

I have five buttons with audio attached to each button. When I publish in html5 and test the buttons the audio cuts out at random times. Any suggestions. I have the latest version of Adobe Captivate 7

Can someone please help me with this problem I cannot see how simply attaching audio to a button can be so problematic. I have no idea how to fix this.

I am using CP8 and have found similar issues. When using the responsive project, my slides with multiple buttons have audio attached via advanced actions that will cut out if a user attempts to click another button before the first has finished playing. When the user listens to the entire audio file attached to the button, there are no issues with audio btw. I have tried attaching it to the button, but it plays when the button appears rather than on success. Furthermore, setting it to play audio on success is a problem because there are multiple actions that must be completed for each button. I have also found that setting audio any other way besides through advanced actions can create an audio overlap of more than one audio file. I haven't been able to find a way to time the advanced action or slide so that the user cannot click through the buttons without hearing all of the audio first.
Any ideas on how to get around this problem would be fantastic if it doesn't require an entire rewrite. If I wasn't already 86% through the course development, I would use buttons to initiate branching scenarios which would fix a lot of my issues, but don't want to start over at this point.

Keeping Audio attached

I have been having trouble lately keeping the audio attached to video when I put it through Shake. I've been using Shake to crop video from 16:9 to 2.35:1, and when I render a file out node its missing all sound.
I can't find anything in the manual specifically addressing problems with sound.
Any ideas? What can I do to the render parameters to keep the sound intact?
Any help would be appreciated. Thanks.

How have you added the audio to your slide -- attached to Object/Slide/Background?
Can tell how many slides do you have and what is the duration of audio VS Slide duration?
Thanks,
Anjaneai

Audio attachment will not open and play on Ipad4 but works fine on PC. Any suggestions?

I have been sent an audio attachment in an email to a Hotmail account. It opens and plays fine on my PC but will not open on my Ipad. I get a pop up wanting to forward the attachment from my Comcast email account but neither will open and play it. Any suggestions?

I kept looking and found this answer in an Ipad forum from IpadJunkie. "Try the OPlayerHD lite app...free. When pressing and holding the WMA attachment select open with OPlayer and it works fine."

How do I play audio attachment in my PDF file?

How do I play the audio attachment in my PDF files in android?

Hey thanks, after an hour with Apple, the tech had me reset the phone and it worked perfectly.
Sent from Windows Mail
From: Apple Support Communities Updates
Sent: Sunday, October 12, 2014 11:52 AM
To: jamesfrombend
You received a reply
Ralph9430 has replied to your question. You can view the full discussion in Apple Support Communities.
How do I play audio books in my car using USB cord?
Does the sound system on your car have a usb input? If so connect your iPhone to the radio with your cable and play the audio book on your phone. Note that your vehicle needs to be able to accept audio input through thr USB port and not just provide a charging circuit. Check your vehicle's manual if you are not sure.
Correct Answer Helpful Answer
Use the buttons above to tell Ralph9430 and the rest of the community if this reply solved your question or helped you get closer to finding a solution.
To reply to Ralph9430, go to the discussion in Apple Support Communities.
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

ITunes does not turn on when iPhone attached.

I know I'll feel stupid after somebody gives me the answer to this. But, what the heck, if I don't ask I won't get. So here it goes: My iTunes does not turn on automatically when I attach my iPhone to my Mac. I have to open the application manually. Is there a setting to make it come on when I attache my iphone?

Yes, there is a setting to make it happen. Connect your iPhone to your Mac, and click on it in the iTunes column so it shows the iPhone information. Click on Summary, got to the bottom of that page, under Options, and check the box that says "Automatically sync when this iPhone is connected".
P.S. I know how you feel. I think I have posted about a dozen questions that I have ended up answering myself the next day when I wake up and think about the problem again.

HT2508 My amp has an USB input but when I attach my mac pro to it, and set the input to the USB setting, no sound comes out. I looked at the system settings, but none of them produce a different outcome. How can I send the music through the USB out to USB

My amp has an USB input but when I attach my mac pro to it, and set the input to the USB setting, no sound comes out. I looked at the system settings, but none of them produce a different outcome. How can I send the music through the USB out to USB in?

AFAIK cameras offer their own built-in format utility for inserted SD cards. You should use that. Otherwise, refer to the manual that came with your camera to determine precisely how your SD cards need to be formatted to work properly. Personally, I'd suggest Partition Scheme: MBR, and Filesystem: FAT32.
Try to limit the number of formats you perform on the SD cards, though, as you're reducing their lifespan. I believe formatting causes re-writes to a portion of the SD card that has fewer read/write cycles than the rest of the card as a whole.

Rewind audio attached to an image

I am building a slide where there are 3 buttons a learner can click on. There are 3 images each with audio attached to them
Clicking any of the buttons executes an advance action that shows a specific image and plays attached audio. It also hides the others so they can click on any button at any time so only one image shows/one audio plays at any given time.
My problem is with audio not rewinding e.g.:
if you click on Button1 image shows and audio plays - works fine
then if you click on Button2 - image1/audio1 goes away and image2/audio2 starts - works fine.
butif you were to click Button2 before audio on Image1 is finished then when you go back to Button1 the audio starts where it left off. Is there anyway I can have audio rewind so no matter when you click each button audio always starts from the begining?

Yeah, I realized that, was just posing a potential problem with that solution if anyone was still searching for this.
One thing I did try which seems to work well is making a few more advanced actions to each click box. Let's say we have 3 clickboxes (click_box_1, 2, and 3), each shows an image and wants to play an audio file associated with that image. Each clickbox will need to show it's own image and play the audio. Each clicbox would also need to hide the other images/audio of the other clickboxes. Our problem when the audio is attached to the image is that if you move away and activate another click box, the audio will always resume from where you left it when you return to the click box, the audio won't restart from the beginning. Try this, has worked for me and curious to know if it works for anyone else.
To each click box, add the following advanced actions to your existing advanced actions:
click_box_1
Play Audio - select your audio file
Hide - click_box_1
Show - click_box_2
Show - click_box_3
click_box_2
Play Audio - select your audio file
Hide - click_box_2
Show - click_box_1
Show - click_box_3
click_box_3
Play Audio - select your audio file
Hide - click_box_3
Show - click_box_1
Show - click_box_2
I would have thought that hiding the clickbox you just clicked wouldn't play the audio, but that's not the case, it continues to play. When you click the other boxes, it stops the current audio, for instance, from click_box_1, and starts audio from whichever click box you just selected. If I go back to a click box that I previously started and left before audio finished, it restarts it from the beginning. By the way, this was done using Captivate 7.

Webcam Live - Unable to capture Video when "audio" is on

Unable to capture Video when "audio" is checked.
Error message "Unable to capture Video - check settings for video compressor and Audio compressor". What are these ??
I have Plantronics headset and have tried most "8bit, mono settings"
Capture Video works when audio is not checked.
Am at latest s/w and driver patch levels.
HELP !!!

Addl info
1) When using Skype, Camera and Mic work fine.
2) When I get error - the camera view on my screen balcks out

Text Message Audio Attachment

Hi all,
My friend recently sent me a text message with an audio attachment that she recorded on her phone (not an iPhone). My iPhone plays it fine, it just comes up as a Quicktime movie/file with no other options besides playing and pausing. Is there any way I can get this file onto my computer? I've poked around using Google, but I haven't found anything yet that seems helpful.
Thanks!

Thought I'd bump this thread as I was about to ask the exact same thing. Thanks...

When I attach images to an email they show as the image and not an icon. Is there a way to make the attachment an icon?

When I attach images to an email they show as an image and not an icon. Is there a way to have them attached as an icon?
When I send attachments this way some people can't save them. They can see them but not save them.
Any ideas?

They are received as attachments, i.e. icons. What you see is the real image on your disk, and only if small enough to be displayed. Otherwise, they are small icons inserted in the text.
Additionally, when you place an image in the message, you will find an option in the lower right corner, otherwise absent. Use it, if need be.

I had an old ipod, battery went dead so I just bought a new ipod touch but my old pc doesn't read the new one, when I attach it to my pc it says "camera detected" how to I get the new ipod touch to connect to the pc so that I can download songs?

I had an old ipod which I had downloaded songs from my pc..I bought a new Ipod touch and want to download songs onto my new ipod touch when I attach the ipod to my pc it reads "camera detected" I have a mac air as well but all my songs are on the pc. I want to download songs onto my ipod touch from the pc can any one help me?
Les

This may help you find your iTune account:
Frequently Asked Questions About Apple ID
Without knowing your old account info there is nothing you can do.

My 3GS is responding MESSAGE SEND FAILURE when I attach n send photos. Why? And how do I fix it?

Just started getting a MESSAGE SEND FAILURE response when I attach n send a photo with my texts. Why? How do I fix it?

Did you try what was suggested on that page i.e. disconnecting the iPad from your computer and turning the iPad off (press and hold the sleep/wake button until the red 'slide to power off' appears on screen and slide that) and then back on ?
And if the backup doesn't work after that then try a soft-reset instead of the off and on : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I just got my Mac Pro repaired from Apple but I am experiencing the same issue: Screen freezes and shows funny rectangular bars. I shut it down manually and when I try to turn it back on it beeps 3 times. I know its the RAM but is there a way I can fix it

I just got my Mac Pro repaired from Apple but I am experiencing the same issue: Screen freezes and shows funny rectangular bars. I shut it down manually and when I try to turn it back on it beeps 3 times. I know its the RAM but is there a way I can fix it

If you just got it back and it isn't fixed or something else is wrong with it take it back and have them do the repair correctly.

Manual Transition When Audio Attached?

Similar Messages

Maybe you are looking for