Many problems after new SW Update 10.3.1565 / bad battery life

First feedback about the new software update OS 10.3.1.1565 (Vodafone Germany)
The update is an absolute deterioration, the battery holds much shorter than before (according BlackBerry it should last longer after the update than 25% so far)
Many android apps can not be more often start here then helps only a reboot of the device. The device is very hot since the new software
We have three devices (BB Passport) in all three the same problem.
to the BlackBerry team: please fix this problems as soon as possible.
I look forward to feedback from other user and course of the blackberry developers

Hi all new here.
First off I loved my Passport for 2 reasons - it's typing ability and battery life. I could give a heck about apps and all your toys and games so long as the OS was usable then I'm all in. This device did that for me and now I breathe sighs of relief when using my mobile device instead of snarls and swear words as I'd constantly make spelling errors while using a touch screen.
Anyway back to topic. Updated to 10.3.1.1538 three days ago. The bad. There has been a SIGNIFICANT drop in battery life! It's shocking!! The battery monitor chart used to show lines with a slow steady decline of about a 20-30 degree slope lasting 2-3.5 days before charging up again. Now the chart looks like an alpine downhill ski slope and barely makes a day? What the heck Blackberry? Please fix this **bleep** soon.
The good. I can now type in forums without such a massive delay that would render it useless on this device. Before, I would have to wait to type out a full word one by one (about 2 second lag per letter to appear on screen). Now it's fixed and I can type fluidly without pausing for the screen to catch up.
Awesome stuff. I'm not expecting perfection but I have faith Blackberry will come through and fix the battery life issue and at least have it operating at before-upgrade levels.

Similar Messages

  • Network problem after new OSX update download

    Greetings!
    I've had a new (late 06) Intel 24" iMac networked wirelessly to my older iMac/cable modem/D-Link router very successfully since October. No problems and seamless set-up through the D-Link online wizard software.
    Saturday I noticed an OSX upgrade to 10.4.8 (211mg) and went ahead and did the download on the wireless (Intel) iMac.
    Upon restart, however, I have not been able to reconnect to my network. Airport is ON, but choosing my network name returns an error message. I have also attempted to reboot both cable modem and router, and reentered the D-Link wizard to both doublecheck the old network, and set up a new network, but saving these settings seems to fail by not recognizing the device, the router.
    One of the error messages (on the wireless iMac) claims that my "settings have been changed by another application" (or to that effect) but does not give any clue as to how to determine what or where.
    Also, since attempting to start from scrtch with the router, I no longer seem to get a full signal from the airport -- in Internet Connect, I no longer see a nice row of blue signal lights.
    As you may be able to tell, I am new to networking, and the D-Link setup had helped make it simple -- tht is, I bumbled my way through it and was pleased with how well it worked. Now, after the OS update, not having the network is annoying -- and potentilly disastrous, as I need this machine online by Saturday.
    Anyone able to give me a gentle hand, or nudge in the right direction?
    Thanks in advance!
    Bill
    PS- Mac user since 1991! Wireless network user since only late October!

    Hi again,
    Sorry, BDAqua, I didn't see your note. I don't quite understand the last line of your suggestion -- a number greater than the number of CPUs? Not sure what you mean...
    Phil, thanks for your note, too.
    I believe the answer to your first question is 802.11g -- this is what it was set to.
    After trying again to connect, using my old passwords, I was able to see the blue signal strength barss, and the Airport icon flashed on and off a few times, but ultimately the connection attempt failed again every time I tried it.
    At this point, I'm no longer confident that my router is sending out a recognizable signal -- is this possible?
    Also, in the dialog box in which available networks are usually shown (which has not happened since my original connection in October), today I was faced with a choice I hadn't seen before: 2WIRE736 -- is this likely to be someone else's network (a neighbor's)? I was wondering -- I'd never seen that one before. However, my own network names do not show up for choosing, and when I use Internet Connect to request them (and add WPA Personal and passwords), the connection appears to fail immediately.
    At this point, should I attempt an OSX reinstall? Or has something I described made some sense for you?
    Again, still very appreciative of all your help and patience with my ignorance.
    Bill

  • I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

    I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
    Will you please help me in this regard?
    Another issue, since i bought my new iphone there is dust inside back main camera.
    Your advises are highly appreciated.

    Hey Shaiju isac,
    I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    David

  • Skype problems after New update

    Hello i was never got problems in skype.This is the first time... After the new update it's updated normally and restarted i signed in and for 1 minutes all normal , after it started to bug the grapics for example the chat messages are showed each in other ,two messages or more in one message and it's laggs , not only with chat is the problem with everything what i open in windows after new skype update.... if i close skype with quit skype everything is working fine.If i click on for example friends on skype half shows the friends half the recent and if i scroll down show one of my friends in list bugged in.I think i can't even tell how looks like if i minimalize a part of skype is on my wallpaper still bugged like v**it.I tryed to reinstall serval times with older versions and with newest versions but the older version's installers doesn't work because show an error messsage:Can't communicate with the server.After reinstalling the newest version i click one skype one of my friends and shows the following error message:Not enough storage to process this command.And the chat windows appears still like v**it.Web skype client works fine i don't know the PC versions of skype why doesn't work please help me.It's urgent. PS:I looked and my ram is not full ,on disk i have 40gb on C: and 71gb on D: Pc specs:Name:Asus EEE Pc 1005HGO/1005HBO1gb ram.Intel Atom 1Core 1.66ghzIntel GMA 945 140GB HDD If you need more info i will send.Thanks for help. 1gb ram 

    Suzi.H wrote:
    Hello, my skype ( downloaded from windows store ) is asking for update..In the store it won't show up in the updates, opening the app only "saying" you  own this app..No any option to update..I uninstalled and re-installed it but still giving me the same message: It won't log me in because i need to update...Can't do it anywhere though...Very disturbing!! I updated my windows nd restarted the laptop and everything i can think of...The "modern" Skype from Windows store was disabled on July 7. http://blogs.skype.com/2015/06/11/a-more-efficient-skype-experience-for-your-pc/ The only Skype application you can use now in Windows 8/8.1 computers is Skype for Windows Desktop version. You should download and install this Skype version: http://www.skype.com/en/download-skype/

  • Why am I facing so many problem after upgrading to ios7, my phone hangs/stuck many times, applications just stop working and close themselves, battery drainage,Facebook and all applications don't work properly. What should I do? They punished me for upgra

    I'm using iPhone 5
    Why am I facing so many problem after upgrading to ios7, my phone hangs/stuck many times, applications just stop working and close themselves, battery drainage,Facebook and all applications don't work properly. What should I do? They punished me for upgrading to ios7. I now hate apple and I'm thing of getting samsung.

    Basic troubleshooting
    Reset
    Restore with backup
    Restore as new ( better )

  • Wifi problem after.4.3 update on xperia z

    Hi all,
    After updating my Xperia Z (C6603) to build number 10.4.1.B.0.101 I've been having connection issues with every Wi-Fi network.
    I've checked the forum but I only found problems about people having Wi-Fi issues with their smartwatch, I do not own a smart watch this is just a general networking issues.
    Here's the problem in detail:
    When having no Wi-Fi switched on while booting the phone the phone will start without any issues, I will receive my 3G/4G signal and I can browse, e-mail, everything.
    Once I switch on Wi-Fi it will start connecting to previously stored Wi-Fi access points but will not connect. Eventually it says that there was a problem with connecting, even though this will take several minutes.
    I can go into the Wi-Fi settings, select a different Wi-Fi network (if it is in range) and press connect, however the settings app will freeze at that point and eventually I'll get a notification that the settings app has stopped working.
    I have found a "work-around": I switch the Wi-Fi to on, power off the phone and power on again. Now the Wi-Fi connection immediately powers on without an issue once the phone has completely booted, it also will connect to the default Wi-Fi connection that is in range. A different issue appears however once I move out of Wi-Fi range, it will no longer pick up my 3G/4G signal. It is also impossible to switch off Wi-Fi or switch Wi-Fi network connections without rebooting the phone.
    As I said before this happened to me after updating to version 10.4.1.B.0.101 after having it received through OTA update. I do not have root access on my phone either so this can't be it.
    Is there anyone experiencing the same issues? Is this somehow related to the issues people are experiencing with their smart watch connections (as seen in this topic: http://talk.sonymobile.com/t5/Software-Updates/wifi-problem-after-4-3-update-on-xperia-z/td-p/490591...
    If there's anyone who is experiencing the same issues, or has found a fix for this I'd gladly hear from you.
    Regards,
    Danny
    Sony Xperia Z
    Modelnumber: C6603
    Android version: 4.3
    Kernal version: 3.4.0-ge09aff8
    Build number: 10.4.1.B.0.101

    I faced the same problem. So what u did now to connect your 3g or 4g. Did u tried kitkat update? Its works or not?

  • After updating to iOS 6 my battery life of iPad 2 has reduced drastically..plz help..have tried all the standard solutions suggested in forums but doesn't help

    After updating to iOS 6 my battery life of iPad 2 has reduced drastically..plz help..have tried all the standard solutions suggested in forums but doesn't help

    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • I Have been getting BAD battery life after the ICS UPDATE !! on the DROID RAZAR MAXX have this happen to any one else ??????

    i have been getting really bad battery life after install ICS on my droid razar maxx i can only go 1 day and 3 hours where i used to be able to go 2 day easy have this happen to anyone else can someone tell me how i can make my battery life better??????/ and do i need to let my phone go complete dead before fully chargeing it again ??????
    before install the ICS update i had 30 percent of battery life remaining so i pluged it in and let charged for a little bit while it updated my phone and ever thing after it updated i unplug my phone and started playing on my phone to see what ICS was all about but when it got to 15 and said " connect to your changer so i did !!!!! should i haved let my phone going complete dead since i unplug without it fully changer or does it matter ?????????????? if someone could please help me !!!!:)

    What was your battery reading right after the update when you unplugged the phone? I have never let my Maxx drain further than 20% battery ever before I charge it. Yesterday after the update I also played more with the phone trying to learn the OS, as did most everyone on this forum. Give it a few days of your normal use before you decide your battery life has decreased. I took my phone off charger today at noon, it was 100%, and now it's 80%, with about 30 min talk time, and mostly standby. that's about normal batt life for me, maybe a little better than before the update. I'm still going to watch it for a few days before I make a conclusion about battery life.

  • After upgrading my iPhone 4s to iOS8 my battery life has been cut in half

    After upgrading my iPhone 4s to iOS8 my battery life has been cut in half
    Mail is 44% of the battery - I get about 300 emails through MSexchange and 25 through hotmail and .25 from cogeco.
    Home & Lock Screen is 19%
    Phone is 14%
    Calendar 11%
    Is there a bug in mail or is it just too much volume?

    I see the same thing after upgrading to ios8 on my iphone 4S.
    In my case, Mail is 76% of my activity. Disabling my mail accounts allows me to go back to my once a day charging routine. Otherwise, my battery runs down from 100% to 9% in 3.5 hours. I have two mail accounts. One exchange based the other is gmail.

  • After Yosemite Update, Macbook Pro Frustratingly slow, along with many problems after

    My Info:
    Macbook Pro (2012)
    2.4 GHz Intel Core i5
    OS X 10.10.3 (14D136)
    Memory: 4 GB 1333 MHz DDR3
    186.54 GB free of 498.88 GB
    Until the last OS X Update (Yosemite), I have had no problems with my almost three year old MacPro.
    However, after the last update, I have so many problems with my mac, I just feel like throwing
    it out the window.
    Unfortunately, I did not have a backup prior to the update, but I backed up my photos and files, then proceeded
    to follow apple's instructions (apple support chat) to erase the HD and re-install yosemite from online. Then, I backed up my files and photos from my external drive. (I used TIME MACHINE)
    Fine in theory, but:
    1. my iphoto library was somehow lost, nowhere to ever be found again
    2. I suddenly have issues with my trackpad--the "double click" or "right" click refuses to work, I cannot drag and drop.
    3. I have java runtime error messages even upon startup, without internet connection, even though I have already deleted anything and everything java related.
    4. My safari is completely useless. Freezes even when only using one tab, must force quit every second.
    5. My computer decides by itself when to zoom in and out of a page.
    6. My apps are completely slow, I most always need to force quit them
    7. My trash has many issues-- If putting a file in the trash, it says "moving file to trash" for hours on end without ever completing the action, also, if I try emptying the trash, it's the same story.
    8. Settings. If I try to change a setting, it says "authenticating" for ever and ever without ever authenticating, and I am unable to change any settings.
    I have talked to apple many times but have not yet reached a solution.
    I have no other resolution at the moment, as I am in Taiwan for another month (My Chinese is limited and there are few, if none authentic Apple stores around)
    I have one more month on my warranty so I can *possibly* take it in to a store when I return home, but I first wanted to ask here and see if anyone else stumbled upon the same issues, or if they had solutions.
    Thank you!

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a general summary of what you need to do, if you choose to proceed:
    ☞ Copy a particular line of text to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.
    5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
    You may have started up in safe mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.
    If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
    [Process started]
            Part 1 of 8 done at … sec
            Part 8 of 8 done at … sec
            The test results are on the Clipboard.
            Please close this window.
    [Process completed]
    The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
    Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
    12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
    Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Problems with SMS after new iPhone update

    After downloading the new iPhone update my SMS messages started getting scrambled up. A few of my friends that also own iPhones are having the same problem and i was curious if there are others out there? And also if there is going to be anything done about it?

    Search the forums for "Re: SMS conversations 1.1.3", this has solved that problem for a majority of the folks having it.

  • So many problems after E71 update

    hey i hav updated my e71 wid latest firmware recently bt after updating my phone i m facing so many problems
    1. wenever i open camera n take a pic some text comes ( i dont know wats mean by dat text bcoz its in sm other language )
    2. my msgs r gettng sent so lately
    3. wifi is not working properly means i coudnt connect to internet via wifi .. though it search 4 wifi device bt doesnt let me connect to internet!
    please suggest me sm remedies hw to overcome these problems

    You could try reinstalling the firmware update and I would also strongly recommend resetting your phone immediately after an update.

  • BUG: text rendering problems after keyboard firmware update

    Hey all!
    Just letting you know that today, after installing the keyboard/mouse firmware update 1.0, the font rendering in many applications become weird, letters may overlap, see some screenshots:
    http://artemio.net/tmp/apple/bug1.png
    http://artemio.net/tmp/apple/bug2.png
    My system is iMac Intel Core Duo 17", 2 GB RAM, 250 GB HDD, Mac OS 10.4.6.

    Just to clarify, that was a software update, not a firmware update. I don't think the keyboard has any resident firmware.
    Since this is a new update from Apple, and there have been very few posts about problems after it was installed, (I have seen a couple here) I think that you should call and speak directly with an Apple Customer Service rep. That way Apple knows some have issues with the update and they may have suggestions.
    Let us know what they say.

  • Attachments still not opening even after new September Update??

    I hope someone might be able to shed some light on this. After the new update I sent myself some word, excel, pdf attachments thinking to try the tilt/landscape feature in viewing attachments, but nothing. The attachment still shows up as a bar with the file name, but nothing happens when I click on it, as the intro video on Apple said to click on it and the attachment should open and you can see them in landscape mode?? Anyone else having this problem, all the other updates were succefully downloaded.
    SK

    I hope someone might be able to shed some light on this. After the new update I sent myself some word, excel, pdf attachments thinking to try the tilt/landscape feature in viewing attachments, but nothing. The attachment still shows up as a bar with the file name, but nothing happens when I click on it, as the intro video on Apple said to click on it and the attachment should open and you can see them in landscape mode?? Anyone else having this problem, all the other updates were succefully downloaded.
    SK

  • Problem after Energy Manager update to 3.20

    Hi there,
    I have a problem with my t61 in order to energy manager after updating it to version 3.20.
    The symbol of the charge condition in the task bar disappeared and an error prompt appeared after new start ("Error by loading
    C:\PROGRA~1\ThinkPad\UTILIT~1\PWMTR32V.dll Can't find denoted module" [translated to engl.].
    The error also occures when I try to set the option "task bar" in options of energy manager.
    Are there any information about this lil problem on the boards?
    Thanks so far.
    Solved!
    Go to Solution.

    Hi,
    It happened to me when I downloaded Power Manager 3.20 through system update.
    To cure it I have dowmloaded Power Manager from Lenovo site
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70601
    and installed it manually.
    Good luck!

Maybe you are looking for