Many unused volumes created in Windows8. Do we need all these?

I have a query regarding the disk volumes in windows 8. Disk partition tool shows following partitions
Volume
Layout
Type
File System
Status
Capacity
Free
Volume (C;)
 Simple
Basic
 NTFS
 Healthy(Boot, Page File ...) 
218GB
8GB 
Volume <nolabel>
 Simple
Basic
Healthy(Recovery Partition)
450MB
450MB 
Volume <nolabel>
 Simple
Basic
Healthy(Recovery Partition)
350MB
350MB
Volume <nolabel>
 Simple
Basic
Healthy(Recovery Partition)
10.5GB
10.5GB
Volume <nolabel>
 Simple
Basic
Healthy(EFI System Partition)
260MB
260MB
Volume <nolabel>
 Simple
Basic
Healthy(Primary Partition)
8GB
8GB
Other than the volume C:, rest are shown as unused and fully free. I am not sure about the significance of 
these volumes. So wanted to check if any of these volumes can be deleted and combined along with main C volume
and thereby increase the disk space. If yes, how can I do that.
Also the Diskpart tool in command prompt does not show the last one [ 8gb]. All the volumes except this one is shown as NTFS
in Diskpart. I am not sure why the last one is not listed. Please help
thanks
Ramesh

Hello Ramesh,
Have you made any change before this issue?
What Disk partition tools do you use to show the partitions information? Disk Management?
What diskpart command do you use?
We could use the diskpart command list volume to check if it list the 8GB volume.
We could use the diskpart command to force-delete the partition
For more information, please take a look at the following thread similar to this issue.
https://social.technet.microsoft.com/Forums/en-US/4f1b84ac-b193-40e3-943a-f45d52e23685/cant-delete-extra-healthy-recovery-partitions-and-healthy-efi-system-partition?forum=w8itproinstall
Please perform the following steps:
1. Open a command prompt as administrator.
2. Run Diskpart application by typing Diskpart in the command prompt.
3. In the “Diskpart” prompt, enter rescan command and press Enter key to re-scan all partitions, volumes and drives available.
4. Then type in list disk and press Enter key to show all hard disk drive available.
5. Select the disk that contains the partition you want to remove. Normally, with just 1 hard disk, it will be disk 0. So the command will be:
Select disk 0
Finish by Enter key.
6. Type list partition and press Enter key to show all available and created partition in the disk selected.
7. Select the partition that wanted to be deleted by using the following command, followed by Enter key:
Select partition x
Where x is the number of the recovery partition to be removed and unlocked its space. Be careful with the number of this partition, as wrong number may get data wipes off.
8. Finally, type in delete partition override and press Enter key.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Similar Messages

  • F110 -Too many payment mediums created for this payment group

    Hello Gurus,
    Am getting below error after executing payment run F110.
    BFIBL02160               Too many payment mediums created for this payment group
    BFIBL02616               End of log for payment run 20140409 / DPA04 , PE1 / 500
    We are not able to see the Payment advice note in the spool request.
    Can you please share your ideas to resolve the issue
    Thanks in advacne

    HI,
    Please let us know for account like vendor , customer  you running the payment advice.
    check if the customer ,vendor document  is posted or not.
    which customer, vendor number you had maintained in the f110 .
    check that before you run it.
    else.. create new document  and start run the payment.
    for single document fi you try  more than once it will give the above error.
    and also the check the program and variant as well.
    let me know any corrections.
    thanks.

  • DMEE error (Error Log -  Too many payment mediums created for this payment group)

    Hi Experts,
    Please see the below error while generating the DMEE file.
    Error Log -  Too many payment mediums created for this payment group
    Error is - Too many payment mediums created for this payment group
    Please explain how to resolve this error.Send detail documentation how to rectify this error
    Regards
    Sreedhar

    Hi Nimish Agarwal,
    With reference to the error faced i.e. BFIBL02160 "too many payment
    mediums created for this payment group", please review the information
    provided in the long text of this error in detail.
    Please ensure that the orders are not carried out several times.
    Alternatively you can apply the optional usable message 166 (same
    class: BFIBL02), so that you can prevent creating duplicates in future.
    Please customize this message as an error so as to prevent the system
    from creating duplicate files. You can customize this message in OBA5.
    The message BFIBL02 160 always occurs, if you create more than one
    file for the same payment run, in order to warn you not to send the
    same file twice to the bank.
    The SAPFPAYM program does not create 2 files at once. But if you
    run this program more than once for the same payment run, more than
    one file is created. From the second run on you receive the error
    message BFIBL02 160. You can easily test it, by creating a new
    payment proposal and creating a new file with this proposal and
    SAPFPAYM. The first time you run this program you will not receive
    the message.
    Hope this clarifies.
    Kind Regards,
    Fernando Evangelista

  • How to find how many sto's Created in One plant

    Dear
    how to find how many sto's Created in One plant
    ex: i have 5 plants now i want to check how many sto's done

    Hi,
    Please check in table EKKO for supplying plant against STO document
    EKPO against Receving plant
    WB2_V_EKKO_EKPO2 - You can pass both supplying plant as well as receving plant.
    Regards,
    Haresh

  • How many dimensions can create in BPC

    Hi friends
    How many Dimension can create in Dimension Library in BPC NW
    Lion

    Hi Surender,
    You have any no. of Dimensions in Dimension library.
    In a BPC Application the mandatory Dimensions are Account, Category, Entity and TIme.
    In an Appset you should have Intercompany Dimesion.
    The other are D - Datasource dimension and User defined Dimensions.
    Regards,
    Raghu

  • How many Objects are created in this?

    Hi,
    How many objects are created in the flwg code:
    String str = new String("Hello");
    String str2 = "Hey there";
    str = str + str2;

    Depends if you're counting objects created at compile time.
    "Hello" is created at compile time. That's 1.
    new String("Hello") creates a new String object at runtime, pointing its backing array at the "Hello" in the constant pool. That's 2.
    "Hey there" is created at compile time. 3.
    str + str2 I might do everything at compile time, or it might do some at runtime. I don't know if str is considered a compile time literal here. I think not, but I'm not sure. You can check by using javap. If I'm correct, then at runtime you'll create a StringBuffer (4) and another String (5).
    So I'd say 5 objects. But if the compiler treats str as a literal and therefore can do the str+str2 at compile time, then it might do so without creating the StringBuffer. Or it might still create it at compile time, use it, and throw it out.

  • How many sessions are created in Server ?

    Hi All developers,
    SCJP back again.........
    Anybody please tell me......
    Is there any way to find out how many sessions are created in server ?
    Thanks in advance ..............

    Only by keeping track of them yourself.
    The various session listeners - SessionListener, SessionBindingListener are usefule here.

  • How many tables are created in Master data loading ( Including hierchy )

    hi ,
    Please anybody , can you tell us how many tables are created in Master data loading ( Including hierchy )
    thanks
    Phani

    Hi PP,
    Depending upon the definition of an infoobject, the tables are created when the objects are activated.
    /BI<C OR DIGIT>/<TABLE CODE><INFOOBJECT>
    <C or digit>: C = Customer-defined InfoObjects
    digit = SAP-defined InfoObjects
    <table code>: S = SID table
    T = Text table
    P = Time-independent master data attributes
    Q = Time-dependent master data attributes
    M = Union of time-dependent and time-independent master
    data attributes
    X = SID table for time-independent navigational attributes
    Y = SID table for time-dependent navigational attributes
    H = Hierarchy table
    K = Hierarchy SID table
    I = Hierarchy SID structure table
    J = Hierarchy interval table
    Thnaks...
    Shambhu

  • Well, I created a new Apple ID and I put money on it, I wanted to sign into ICloud and it wouldn't let me sign in due to the usage of too many Apple IDs created. The point for logging into the ICloud was to save my photos before I reset my phone.

    Well, I created a new Apple ID and I put money on it, I wanted to sign into ICloud and it wouldn't let me sign in due to making too many Apple IDs created. The point for logging into the ICloud was to save my photos before I reset my phone. Is there any way I could fix this? I also want to transfer my money because I think it's a waste to just forget about the $13.75 on my account. Thanks.

    I recently created a new apple ID
    Bad idea.
    Content bought with an Apple ID is forever associated with that Apple ID. Apple will not transfer content from one Apple ID to another and Apple will not merge Apple IDs. Unless you are prepared to forfeit all the previously purchased content and buy it all again with the new Apple ID, you will need to maintain the old ID to update and redownload your content.

  • When we create a queue how many files get created???

    Hi All,
              When we create a resource suppose a queue then how many files get created or modified from that action internally??
              Thanks in advance
              Sumeet

    In 8.1, one file: "config.xml"; in 9.0 one or two files (your JMS module file, and potentially the config.xml) .

  • How many hash partitions create is prefer

    I want to create hash partitions on a large table,but i don't know how many partitions to create?
    create table T_PARTITION_HASH
      ID   NUMBER,
      NAME VARCHAR2(50)
    partition by hash (ID)
      partition T_HASH_P1
        tablespace USERS,
      partition T_HASH_P2
        tablespace USERS,
      partition T_HASH_P3
        tablespace USERS
    );

    Agustin UN wrote:
    What is the table size in rows and Mb?
    What is the grow estimated of table?
    What access is on table?
    . :-) Any help with my english will be welcome :-).the table contain about 1 hundred million rows.
    the table grows 1000000 rows per day.
    the table is use for statistical analysis in data wasehouse.
    Edited by: user7244870 on Nov 5, 2010 2:22 AM

  • Trying to keep track of how many objects I create

    Hello everyone I'm trying to keep track of how many message objects I created and Assign them to a data member.
    Right now it assigns all the Message objects the same number at the end which is 3. I wanted it to assign 1 to the first object it create, 2 for the 2nd, and 3 for the 3rd.
    here's a small version of my code:
    package ss;
    import java.util.ArrayList;
    import java.util.Iterator;
    public class MainTest {
         public static void main(String [] args)
              Message msg = null;
              ArrayList<Message> msgList = new ArrayList<Message>();
              for(int i = 0; i < 3; i++)
                   msg = new Message();
                   msgList.add(msg);
              System.out.println(msgList);
    package ss;
    //this class will hold the Event/Message
    import java.util.List;
    import java.util.HashMap;
    import java.util.Map;
    import java.util.ArrayList;
    import java.util.Set;
    import java.util.Iterator;
    public class Message {
         //these are datamembers that will be used during
         //the sending of the message to the reciever
         //PacketID should be incremented each time a new message is created
         static int PacketID = 0;
         Message()
              PacketID +=1;
         public String toString() {
              return("PacketID: " + this.PacketID
                        + "\n");
    }output:
    [PacketID: 3
    , PacketID: 3
    , PacketID: 3
    Any ideas what I'm doing wrong?
    Thanks!

    Thanks BigDaddyLovehandles,
    Well there's the problem, I just posted a simpler problem to a bigger one. So I am keeping them in a collection as you can see below.
    I'm keeping these message stored in a multi map, and it is multi-threaded. Everytime a user connects to my server I create a new thread, and start adding the "messages" to the database.
    But I must have a packetID, meaning every new message created I need to assign that number to the message object.
    I also see a problem with this like you said, its not thread safe, if 2 clients connect to the server, and both send me events, there are going to be 2 different maps, copying events from the client and storing them in their own seperate databases.
    This might not be a problem because after I get the events on each thread, i send them to another server for processing.
    Here's an example of what my database looks like that stores the messages:
    //this class should store all the Messages or "Events" and
    //you can access them based on their Serial key.
    public class MessageDB {
         //database to hold the information
         //     holds the Alerts/messages
         Map<String, List<Message>> AlertMap;
         //Constructor
         MessageDB() {
              AlertMap = new HashMap<String, List<Message>>();
         //print, outputs the contents of the hashMap
         public void print() {
              //want to print out the Key and all the Messages
              //associated with that key
              //print, outputs the contents of the hashMap
                   for (String key : AlertMap.keySet())
                        System.out.println("\n\nSerial (key): " + key
                                  + "\nValues in Map: \n" + AlertMap.get(key));
         void add(Message msg) {
              //getting the position of the List by EntityID if avaiable
              List<Message> AlertList = AlertMap.get(msg.Serial);
              //checking to see if there is a unique Key already in the Map.
              if (AlertList == null) {
                   //if there isnt a key in the map, add a new key, and a new List mapping
                   //to the key EntityID;
                   AlertList = new ArrayList<Message>();
                   AlertMap.put(msg.Serial, AlertList);
                   AlertList.add(msg);
              } else {
                   //adding message to List
                   AlertList.add(msg);
         }Any suggestions on what I can to number all these messages and it will be thread safe?

  • How many ways to create servlets

    Hi
    i have some confusion. how many ways to create servlets.
    as of my knowledge 3 ways 1) implementing Servlet 2) extending GenericServlet 3) extending HttpServlets.
    can any one tell me this is correct or not.

    The only correct way (IMHO) to declare a Servlet is to implement Servlet... Extending GenericServlet or HttpServlet has (almost) the same effect it's not self documentingIf it's an HTTP servlet the only correct way is to extend HttpServlet, unless you really want to reinvent the wheel. You can add 'implements Servlet' if you insist but it is entirely redundant. The Javadoc will be the same in either case.
    In other words I don't know what this poster is talking about.

  • Error Log -  Too many payment mediums created for this payment group

    Hi Experts,
    When I am doing payment to customers through T-code F110, I am able to clear the open item. But when we are executing the Payment medium - DME Administration, generate the Payment Advice and when we see the print preview of the Payment Advice in spool request, System is showing the following errors,
    "BFIBL02160               Too many payment mediums created for this payment group"
    "BFIBL02616               End of log for payment run 20120123 / NAA02 , NSD / 200"
    "This is line 1/column 45 on page 1"
    Message no. SP01R116
    Kindly help how to rectify the same
    Thanks in advance
    Regards,
    Nimish Agarwal

    Hi Nimish Agarwal,
    With reference to the error faced i.e. BFIBL02160 "too many payment
    mediums created for this payment group", please review the information
    provided in the long text of this error in detail.
    Please ensure that the orders are not carried out several times.
    Alternatively you can apply the optional usable message 166 (same
    class: BFIBL02), so that you can prevent creating duplicates in future.
    Please customize this message as an error so as to prevent the system
    from creating duplicate files. You can customize this message in OBA5.
    The message BFIBL02 160 always occurs, if you create more than one
    file for the same payment run, in order to warn you not to send the
    same file twice to the bank.
    The SAPFPAYM program does not create 2 files at once. But if you
    run this program more than once for the same payment run, more than
    one file is created. From the second run on you receive the error
    message BFIBL02 160. You can easily test it, by creating a new
    payment proposal and creating a new file with this proposal and
    SAPFPAYM. The first time you run this program you will not receive
    the message.
    Hope this clarifies.
    Kind Regards,
    Fernando Evangelista

  • How to pull sales orders based on a Campaign??( I have created one Campaign and i need to know,for how many orders it was applicable)

    How to pull sales orders based on a Campaign ID??( I have created one Campaign and i need to know,for how many orders it was applicable)

    Hello,
    as far I understand you are talking about campaign determination. Once a sales order is generated having a campaign determined the campaign creates a reference to the sales order. The best way to track the assigned sales orders is using the related transactions function:
    The same feature is available for trade promotions as well.
    The data is available in table CRMD_BRELVONAE - you can also write a report selecting on OBJGUID_A_SEL with the campaign or TP guid and OBJTYPE_A_SEL with BUS2010020 for campaigns and BUS2010030 for trade promotions.
    Is this answering your questions?
    best regards,
    Johannes

Maybe you are looking for