Map entries of a table on several 0..1 nodes

Hello Gurus!!
I have to map the next structures, I hope somebody could guide me.
Source
<FIELDS> 0..2
<NAME>
<VALUE>
</FIELDS>
Target
<DATA>     0..1
<NAME1>
<VALUE1>
<NAME2>
<VALUE2>
<DATA>
An example could be:
Source
<FIELDS>
<NAME>COLOUR</NAME>
<VALUE>Green</VALUE>
</FIELDS>
<FIELDS>
<NAME>SIZE</NAME>
<VALUE>9X12</VALUE>
</FIELDS>
Target
<DATA>     0..1
<NAME1>COLOUR</NAME1>
<VALUE1>Green</VALUE1>
<NAME2>SIZE</NAME2>
<VALUE2>9X12</VALUE2>
<DATA>
I hope will be clear enough.
Thanks and regards,
Manuel.

Hi Manuel..
This might be because there is no second value(a[1]) .i.e..
only one occurance of fields node..
<FIELDS>
<NAME>COLOUR</NAME>
<VALUE>Green</VALUE>
</FIELDS>
not present
*<FIELDS>*
*----<NAME>SIZE</NAME>*
*----<VALUE>9X12</VALUE>*
*</FIELDS>*
*so add a condition in th second udf..*
If (a.length = 2)
then only return a[1].
Hope this is clear..
please reward if helps...
thanks,
Vijaya

Similar Messages

BPM question - Delete all entries in a table and Insert data

Hello,
I'm new to PI BPM and have this scenario to implement.
I'm supposed to delete all entries in a table and then insert data to the same table.
Is BPM necessary? If it is, what is the best practice to implement my scenario?
I want to make sure that all entries were successfully deleted before insert data.
How do I check if all entries in the table were deleted successfully before
initiating insert.
Thank you.
-Won

Hi Won,
Yes, this is possible without BPM.
You have to create 2 separate mappings, each for deleting & inserting the records.
You will have 2 different Interface mappings as well.
But in ID, create a single interface determination.
In that, configure Deletion interface mapping first and in the second row, configure Insertion interface mapping.
Please make sure that the parameter 'Mainain Order At runtime' is checked in interface determination.
-Supriya.

Missing "Mapping entry" issue in tranferring Cust/Vendor Master Data

Hi All,
We are doing a version upgrade in one of our client for SCM APO (SCM 7.0 SPS 8). We are getting an error while transferring customer/ vendor master data (either in foreground or background) that "No location XXXXXXXX exists for mapping entry XXXXXXX of category 1011 (1010 in case of customer).
Please provide your valuable help to resolve this issue.
Thanks.

Dear Ravi.
Please use the report ZMATMAP_REORG provided in note 859650 to remove the inconsistencies between /SAPAPO/LOCMAP and /SAPAPO/LOC.
The number of entries in these both tables should be the same.
I am not aware of your SCM Release, but it is also relevant for release 4.1, despite the info in the note.Please copy the report in your system and execute it firstly in the test mode.
I hope this helps you!
Let me know the outcome of the issue.
Thank you!
Will

For All Entries with two tables

Hi All,
         Can we use FOR ALL ENTRIES with two tables. for example
SELECT * FROM MKPF INTO TABLE T_MKPF
         WHERE BUDAT IN S_BUDAT.
SELECT * FROM MARA INTO TABLE T_MARA
         WHERE MTART IN S_MTART AND
                        MAKTL IN S_MAKTL.
SELECT * FROM MSEG INTO TABLE T_MSEG
       FOR ALL ENTRIES IN "T_MKPF AND T_MARA"
              WHERE MBLNR EQ T_MKPF-MBLNR AND
                             MATNR EQ T_MARA-MATNR.
can we do it like this or any other way to do this plz tell. I waitting for your responce.
Thanks
Jitendra

Hi,
u cannot do like this....chek some documentation on it..
1. duplicate rows are automatically removed
2. if the itab used in the clause is empty , all the rows in the source table will be selected .
3. performance degradation when using the clause on big tables.
Say for example you have the following abap code:
Select * from mara
For all entries in itab
Where matnr = itab-matnr.
If the actual source of the material list (represented here by itab) is actually another database table, like:
select matnr from mseg
into corresponding fields of table itab
where .
Then you could have used one sql statement that joins both tables.
Select t1.*
From mara t1, mseg t2
Where t1.matnr = t2.matnr
And T2..
So what are the drawbacks of using the "for all entires" instead of a join ?
At run time , in order to fulfill the "for all entries " request, the abap engine will generate several sql statements (for detailed information on this refer to note 48230). Regardless of which method the engine uses (union all, "or" or "in" predicates) If the itab is bigger then a few records, the abap engine will break the itab into parts, and rerun an sql statement several times in a loop. This rerun of the same sql statement , each time with different host values, is a source of resource waste because it may lead to re-reading of data pages.
returing to the above example , lets say that our itab contains 500 records and that the abap engine will be forced to run the following sql statement 50 times with a list of 10 values each time.
Select * from mara
Where matnr in ( ...)
Db2 will be able to perform this sql statement cheaply all 50 times, using one of sap standard indexes that contain the matnr column. But in actuality, if you consider the wider picture (all 50 executions of the statement), you will see that some of the data pages, especially the root and middle-tire index pages have been re-read each execution.
Even though db2 has mechanisms like buffer pools and sequential detection to try to minimize the i/o cost of such cases, those mechanisms can only minimize the actual i/o operations , not the cpu cost of re-reading them once they are in memory. Had you coded the join, db2 would have known that you actually need 500 rows from mara, it would have been able to use other access methods, and potentially consume less getpages i/o and cpu.
In other words , when you use the "for all entries " clause instead of coding a join , you are depriving the database of important information needed to select the best access path for your application. Moreover, you are depriving your DBA of the same vital information. When the DBA monitors & tunes the system, he (or she) is less likely to recognize this kind of resource waste. The DBA will see a simple statement that uses an index , he is less likely to realize that this statement is executed in a loop unnecessarily.
Beore using the "for all entries" clause and to evaluate the use of database views as a means to:
a. simplify sql
b. simplify abap code
c. get around open sql limitations.
check the links
http://www.thespot4sap.com/articles/SAPABAPPerformanceTuning_ForAllEntries.asp
The specified item was not found.
Regards,
Nagaraj

Removing entries in the table

Hi,
I need to delete entries in the table ,those may be anywhere between 1 to several thousand. If I want to delete for every hundred records how could it be coded.
Thanks,
Kranthi.

Here is a sample program which shows how to delete from a database table 100 records at a time.
report zrich_0001.
data: itest type table of ztest with header line.
data: itest2 type table of ztest with header line.
data: index type i.
* Get all the records that you want to delete
clear itest. refresh itest.
select * from ztest
      into corresponding fields of table itest
                    where mtart = 'ZNBW'.
* Loop untill the first itab is empty, move 100 records * at a time into the second itab, then delete from that
* second itab.
while not itest[] is initial.
clear index.
loop at itest.
    index = index + 1.
    check index <= 100.
    move-corresponding itest to itest2.
    append itest2.
    delete itest.
endloop.
delete ztest from table itest2.
endwhile.
Regards,
Rich Heilman

Rejecting IPSec tunnel: no matching crypto map entry for remote proxy

Hi!
I have already search for this but didn't get an exact answer I'm looking for so I try asking it again (if there is the same question).
I'm in process of migrating some VPN tunnels with from a Cisco router to an ASA, everything will keep the same but just the peering IP address. However, some of the tunnel was being torn down since it request for a proxy doesn't match the one configured on our side. And the remote peer said there is no such issue on the previous platform, but now they need to reset the tunnel from time to time.
Apr 18 2013 07:29:10 asa002 : %ASA-3-713061: Group = 192.168.1.226, IP = 192.168.1.226, Rejecting IPSec tunnel: no matching crypto map entry for remote proxy 192.168.1.226/255.255.255.255/0/0 local proxy 10.10.9.81/255.255.255.255/0/0 on interface outside
Apr 18 2013 07:29:10 asa002 : %ASA-3-713902: Group = 192.168.1.226, IP = 192.168.1.226, QM FSM error (P2 struct &0x745e9150, mess id 0x8d7ad777)!
Apr 18 2013 07:29:10 asa002 : %ASA-3-713902: Group = 192.168.1.226, IP = 192.168.1.226, Removing peer from correlator table failed, no match!
The remote peer said they did not change the proxy id on their side so it is possibly the old platform will just not setting up the SA without torn down the tunnel while the ASA on the new platform will torn down if there is any mismatch.
Anyway I have requested the remote side to remove those unmatched entried to avoid the tunnel being torn down, but if there any configuration that is related to this issue? i.e. Just bring up the SA with matched addresses and ignore others, instead of torn down the tunnel.
Thanks!!
//Cody

Are you trying to send traffic destined towards the internet from 172.16.0.0/20 via this ASA as well? why? are you inspecting those traffic before being sent out to the internet?
If so, this end also needs to be configured with "any" as well --> crypto ACL needs to mirror image.
access-list outside_1_cryptomap extended permit ip any 172.16.0.0 255.255.240.0
Then you also need NAT on the outside interface, otherwise, traffic from 172.16.0.0/20 is not PATed to a public IP, and won't be able to reach the internet:
nat (outside) 1 172.16.0.0 255.255.240.0

Rejecting IPSec tunnel: no matching crypto map entry for remote proxy on interface outside.

Hi,
I have read a problem where the VPN between an ISP and ourselves started dropping sessions. I have rebuilt the crypto map and tried to dig deeper into my config and some basic troubleshooting while I await the ISP to respond.
Any ideas?
Thanks Steve
https://supportforums.cisco.com/thread/255085
http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a00807e0aca.shtml#solution10
5 Jun 13 15:46:25 713904 IP = 209.183.xxx.xxx, Received encrypted packet with no matching SA, dropping
4 Jun 13 15:46:25 113019 Group = 209.183.xxx.xxx, Username = 209.183.xxx.xxx, IP = 209.183.xxx.xxx, Session disconnected. Session Type: IKE, Duration: 0h:00m:00s, Bytes xmt: 0, Bytes rcv: 0, Reason: crypto map policy not found
3 Jun 13 15:46:25 713902 Group = 209.183.xxx.xxx, IP = 209.183.xxx.xxx, Removing peer from correlator table failed, no match!
3 Jun 13 15:46:25 713902 Group = 209.183.xxx.xxx, IP = 209.183.xxx.xxx, QM FSM error (P2 struct &0xda90f540, mess id 0x76c09eb7)!
3 Jun 13 15:46:25 713061 Group = 209.183.xxx.xxx, IP = 209.183.xxx.xxx, Rejecting IPSec tunnel: no matching crypto map entry for remote proxy 172.16.0.0/255.255.240.0/0/0 local proxy 0.0.0.0/0.0.0.0/0/0 on interface outside
5 Jun 13 15:46:25 713119 Group = 209.183.xxx.xxx, IP = 209.183.xxx.xxx, PHASE 1 COMPLETED
6 Jun 13 15:46:25 113009 AAA retrieved default group policy (DfltGrpPolicy) for user = 209.183.xxx.xxx
6 Jun 13 15:46:25 713172 Group = 209.183.xxx.xxx, IP = 209.183.xxx.xxx, Automatic NAT Detection Status: Remote end is NOT behind a NAT device This end is NOT behind a NAT device

Are you trying to send traffic destined towards the internet from 172.16.0.0/20 via this ASA as well? why? are you inspecting those traffic before being sent out to the internet?
If so, this end also needs to be configured with "any" as well --> crypto ACL needs to mirror image.
access-list outside_1_cryptomap extended permit ip any 172.16.0.0 255.255.240.0
Then you also need NAT on the outside interface, otherwise, traffic from 172.16.0.0/20 is not PATed to a public IP, and won't be able to reach the internet:
nat (outside) 1 172.16.0.0 255.255.240.0

What is the diffrence between map and map.entry in core java

what is the diffrence between map and map.entry in core java . where it will be use ful. any one give one example plz.

A Map contains Map.Entry's
e.g.
        Map map = new LinkedHashMap(8);
        map.put(new Integer(1), "one");
        map.put(new Integer(2), "two");
        final Iterator iterator = map.entrySet().iterator();
        while (iterator.hasNext()) {
            Map.Entry entry = (Map.Entry) iterator.next();
            System.out.println("key=" + entry.getKey() + ", value=" + entry.getValue());
        }

Unable to display data no entry in the table without using Model clause

Hi,
I've an urgent requirement described below :
The previously posted Question has been answerted using Model Clause:
Is there any way out to solve it without using Model clause:
I've a table named as "sale" consisting of three columns : empno, sale_amt and sale_date.
(Please ref. The table script with data as given below)
Now if I execute the query :
"select trunc(sale_date) sale_date, sum(sale_amt) total_sale from sale group by trunc(sale_date) order by 1"
then it displays the data for the dates of which there is an entry in that table. But it does not display data for the
date of which there is no entry in that table.
If you run the Table script with data in your schema, then u'll see that there is no entry for 28th. Nov. 2009 in
sale table. Now the above query displays data for rest of the dates as its are in sale table except for 28th. Nov. 2009.
But I need its presence in the query output with a value of "sale_date" as "28th. Nov. 2009" and that of "total_sale" as
"0".
Is there any means to get the result as I require?
Please help ASAP.
Thanks in advance.
Create table script with data:
CREATE TABLE SALE
EMPNO NUMBER,
SALE_AMT NUMBER,
SALE_DATE DATE
SET DEFINE OFF;
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(100, 1000, TO_DATE('12/01/2009 10:20:10', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(100, 1000, TO_DATE('11/30/2009 10:21:04', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(100, 1000, TO_DATE('11/29/2009 10:21:05', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(100, 1000, TO_DATE('11/26/2009 10:21:06', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(100, 1000, TO_DATE('11/25/2009 10:21:07', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(200, 5000, TO_DATE('11/27/2009 10:23:06', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(200, 4000, TO_DATE('11/29/2009 10:23:08', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(200, 3000, TO_DATE('11/24/2009 10:23:09', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(200, 2000, TO_DATE('11/30/2009 10:23:10', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(300, 7000, TO_DATE('11/24/2009 10:24:19', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(300, 5000, TO_DATE('11/25/2009 10:24:20', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(300, 3000, TO_DATE('11/27/2009 10:24:21', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(300, 2000, TO_DATE('11/29/2009 10:24:22', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(300, 1000, TO_DATE('11/30/2009 10:24:22', 'MM/DD/YYYY HH24:MI:SS'));
COMMIT;
Any help will be needful for me
Regards,

select sale_date,sum(sale_amt) total_sale
from
select empno,0 sale_amt,(sale_date + ao.rn) sale_date
from
select empno,sale_amt,sale_date ,(t.nxt_dt - t.sale_date) diff
from
select empno
,sale_amt,trunc(sale_date) sale_date
,trunc(nvl(lead(sale_date) over (partition by 1 order by sale_date),sale_date)) nxt_dt
from sale
) t
where (t.nxt_dt - t.sale_date) >1
) rec,(select rownum rn from user_objects where rownum<=200) ao
where ao.rn <=(rec.diff-1)
union all
select empno,sale_amt,trunc(sale_date) sale_date
from sale
group by sale_date
order by 1;
~~~~Guess this will serve the purpose...
Cheers Arpan

How to schedule a job poles for a entry in a table.

Hi All ,
I have to schedule a job which runs somw stored procedures only on sunday and monday of a week at 3 AM in the morning.
The condition is that another application puts an entry into a table around 3 AM (some times before and some times late), now my should query
count in the table and runs the procs , however once its done ,it should do it monday and then it should not run till next sunday.
I have successfully created a job which keeps failing till it receives the entry and successfully runs the proc once the entry is there...
However how to schedule this thing ..correctly I need help , I want this job to disable itself on sunday once the procs are run wake up next morning
run again..and then next week ..
Following is the job ,
BEGIN
-- Job defined entirely by the CREATE JOB procedure.
DBMS_SCHEDULER.create_job (
job_name => 'TESTING_FIRST_JOB',
job_type => 'PLSQL_BLOCK',
job_action => 'BEGIN SEODS.test_procedure_11292011(); END;',
start_date => SYSTIMESTAMP,
repeat_interval => 'freq=minutely; byminute=5',
end_date => NULL,
enabled => TRUE,
comments => 'Job defined entirely by the CREATE JOB procedure.');
end;
=====================================================
and following is the proc...
create or replace
procedure
test_procedure_11292011 as
var number;
begin
insert into SEODS.job_status
values (systimestamp, 'JOB TEST_PROCEDURE_11292011 HAS STARTED SUCCESSFULLY');
commit;
SELECT COUNT(*)
INTO var
FROM seods.student_weekend_status;
if var=0 then
raise_application_error(-20101, 'There is no record in the student_weekend_status table');
else
all_realtime();
end if;
insert into SEODS.job_status
values (systimestamp, 'JOB TEST_PROCEDURE_11292011 HAS FINISHED SUCCESSFULLY');
commit;
end;
Thanks in advance , please help

Hi,
This is a known issue in the previous SQL Server version and has been fixed in SQL Server 2012. You should be able to set 90 minutes and the change would be saved in SQL Server 2012.
http://connect.microsoft.com/SQLServer/feedback/details/346786/ssms-does-not-support-job-schedule-frequencies-greater-than-60-minutes
Currently, you may schedule the job to occur every 1 hour or you may refer to the suggestion by Latheesh to get around this.
Thank you for your understanding.
Tracy Cai
TechNet Community Support

How to delete the entries in CDCLS table

Hi All,
There is a potential issue with the size of table CDCLS on production system. We need to reduce or manage the amount of data in this table. CDCLS is a cluster table and cannot be reduced directly,
So first we were reduced the entries in CDHDR and then from CDPOS tables.
After that we tried to reduce the entries from CDCLS table through the program - RSSCD7RE, We are facing the error as - no data available and No active archive key was selected.
Please help me out, how to proceed further in this task. Thanks in advance.

Go to DB15 and see the archiving object.
You can also use the archiving object CHANGEDOCU, please refer SAP documents for that.
Transaction is
SARA -> Archive object CHANGEDOCU
Message was edited by:
ANIRUDDHA DAS

How to delete the NULL entries in nest table

Hi,
After I used a loop and open/fetch cursor populated the object table
I found there are random NULL entries in my object table (nest table)
The data look like this
NULL NULL           NULL
NULL NULL           NULL
123     03-MAY-04     ACTIVE
NULL NULL           NULL
NULL NULL           NULL
234     21-MAY-04     ACTIVE
NULL NULL           NULL
345     11-MAY-04     ACTIVE
NULL NULL           NULL
How can I get rid of those NULL entries in my nest table? So it can become
123     03-MAY-04     ACTIVE
234     21-MAY-04     ACTIVE
345     11-MAY-04     ACTIVE
Additional info:
create type myType as object
(id NUMBER (10,0),
eff_date date,
status VARCHAR2(17)
create type myNestTab as table of myType;
I have tried Delete procedure in following two ways.
Version 1:
FOR i IN l_my_nest_tab.FIRST..l_my_nest_tab.LAST
LOOP
IF l_my_nest_tab(i).id IS NULL THEN
l_curr_event_tb.DELETE(i);
               END IF;
END LOOP;
Version 2:
FOR i IN l_my_nest_tab.FIRST..l_my_nest_tab.LAST
LOOP
IF l_my_nest_tab(i) IS NULL THEN
l_curr_event_tb.DELETE(i);
               END IF;
END LOOP;
Both of them give me the error no data found. And only left me the first NOT NULL entry in the table.
123     03-MAY-04     ACTIVE
Thanks in avdance.

Hi Vishnu,
u can write a report program for this and in that use the event :
AT NEW <field-name> ( use primary key)
your statements
ENDAT
for eg.
loop at itab ( herfe itab must be of type of table for which u want to track new entries)
at new matnr
write:/ new record
endat
endloop.
schedule this report in background to run in every 5 or 10 mins as per your requirement and hence changes can be tracked.
regards
Vinod

Data from a file need to be read and mapped into a custom table of R/3

Hello all,
This is related to inbound to SAP ECC via SAP PI.
There is a requirement concerning PI part that data from a file need to be read and mapped into a custom table of R/3.
To have this scenario developed , do we have any other option than the Proxy ?
My understanding is as follows : File --> SAP PI --> Proxy
You suggestions are welcome.
Regards,
Rachana

Hi Ravi,
As suggested by Inaki, you can use proxy communication in recever.
but you can also use the below
FILE -----> PI -------> PROXY
RFC
IDOC
to communicate to ECC system.
Regards
srinivas

Error while running code template mapping between two oracle tables

Hello All
Iam getting the following error while running code template mapping between two oracle tables. Using OWB 11gR2 and oracle 11gR2 DB.
java.sql.SQLException: ORA-20001: The active workspace is not valid as a target for this mapping
c: at "OWBSYS.WB_RT_MAPAUDIT_UTIL", line 1065
ORA-06512: at "OWBSYS.WB_RT_MAPAUDIT_UTIL", line 1087
ORA-06512: at "SOURCE.FILENET_EX_UNIT_3", line 555
ORA-06512: at line 4
Job 51 error: java.sql.SQLException: ORA-20001: The active workspace is not valid as a target for this mapping
ORA-06512: at "OWBSYS.WB_RT_MAPAUDIT_UTIL", line 1065
ORA-06512: at "OWBSYS.WB_RT_MAPAUDIT_UTIL", line 1087
ORA-06512: at "SOURCE.FILENET_EX_UNIT_3", line 555
ORA-06512: at line 4
Quick help is highly appreciated.

Dera Dallan
its only a target user for the workspace where you are deploying the mapping from.
I have two repositories for two different projects. each repositary has its own workspace.
ex:-
Project 1
Work space bpms_rep_owner
Repositary owner bpms_rep_owner
Repositary user bpms_rep_user
Project 2
Work space dem_rep_owner
Repositary owner dem_rep_owner
Repositary user dem_rep_user
Reg
S.Gyazuddin

Error message while running the payroll-no entry found in table t54c1

Hi All,
Im getting this error-error message while running the payroll-no entry found in table t54c1.What is the reason for this error?
How doi solve it?

Hello
From the description of your problem above, your cumulation calender has not been generated for that month.
Please take necessary action to ensure that calendar type is assigned to pay period in payroll area, by maintaining the payroll period which is represented by Date modifier and period modifier in view maintainance for table T54C1.
Entries for this table are generated with the program RPUCTP10. (You should not have to create manual entries in this table.)
Thanks and Kind Regards
Ramana

Map entries of a table on several 0..1 nodes

Similar Messages

Maybe you are looking for