Mapping conversion help needed for date
Hi Experts,
I need help in message mapping convesion for date field
The source date field can have value '2010-06-04T02:09:59.610-07:00' or 2010-06-04T02:09:60.610-07:00
I have to change it to '2010-06-04T02:09:59.000-07:00'. ie, if the seconds are 59.XXX, or 60.XXX, then change to 59.000.
Please let me know the best way to do this
Thanks
Mike
Again, to make it more clear
The source date field can have any date value such as
2010-06-04T02:09:59.610-07:00 -
This needs to be changed to 2010-06-04T02:09:59.000-07:00
2010-06-04T02:09:60.610-07:00 -- This needs to be changed to 2010-06-04T02:09:59.000-07:00
2010-06-04T02:09:60.000-07:00 -- This needs to be changed to 2010-06-04T02:09:59.000-07:00
2010-06-04T02:09:59.000-07:00 - This need not be changed
2010-06-04T02:09:58.610-07:00 -- This need not be changed
2010-06-04T02:09:57.610-07:00 etc etc - These need not be changed.
The only change using date function is for the first two dates, in which 59.XXX and 60.XXX need to be replaced with 59.000
Using the above date function, all the seconds 59.XXX, 58.XXX, 60.XXX, etc etc,,, are converted to 59.000, 58.000 and 60.000
I dont need this as per the requirement. So looks like the UDF needs to be altered a little to accomodate my requirement.
Please help me.
Thanks
Mike
Similar Messages
-
Help needed for Data Pump.
Hi,
I am using oracle 11g release2 and I am not able to find data pump utility in SQL developer.
Please let me know, if I need to install it. I am new to this utility.
Thanks.I do not believe SQL Developer would have DataPump utility.
As the name implies, SQL Developer is intended to be used as a tool to facilitate development (typically of SQL code), as well as provide additional features to assist developers in their daily routines.
DataPump, is more of a DBA tool used for extracting logical copies of data from an existing database and/or port to another database. To use this utility, you would typically need to be in the dba group (although not necessary if configured properly). But at least on the same server as the datapump utility software resides.
There are many options and features to using datapump, including network_link which allows extraction of data from a remote database to another database on a different server without ever creating a file on the operating system.
If I recall correctly, I believe in older versions of Oracle client (e.g., 8.x), the Oracle client provided the export/import utility. But those days are long gone now. With datapump, it is primary a DBA tool. -
Help needed for data updation in User Defined Tables
Hello Experts,
I am developing one add-on in SAP B1 8.8 to input data in a User Defined Table described as under
Table Name
DriverMst UDT Type is No Object
Description
Stores the Driver master data which are used to get reference in Sale Delivery Form and Driver data management activity
User defined fields
Data Name
Data source
Size
Pane Level
Description
Driver Code
Code
Alphanumeric
0
No object table fixed field
System Name
Name
Alphanumeric
30
0
No object table fixed field
Full Name
FullName
Text
50
0
Father Name
FatherName
Text
50
0
Birth Date
BirthDate
Date
0
Phone Number
PhoneNo
Alphanumeric
50
0
Mobile No
MobileNo
Alphanumeric
13
0
I have created one form using screen painter displaying text boxes and bind them to the table.
This form is working absolutely fine when there are some data in table (i.e. Browse using navigation)
My problem is, when I click add button from tool bar the "OK" button turn to "Add" that means the form is set to Add mode, but when I click "Add" button after entering some data nothing happens and input data is not stored in Table. The same "OK" Button turned to "Update" when I do changes in loaded data, but my changes are not reflected to table after I click "Update".Thanks Nagarajan,
None.
There is no such query. The table fields is directly linked to Edit Box or Combo Box in form.
From the examples I learned that I have to do something like this to get my table updated
Dim oUsrTbl As SAPbobsCOM.UserTable
Dim Res As Integer
oUsrTbl = oCompany.UserTables.Item("DRIVERMST")
oUsrTbl.Code = oBPC.Value 'Item Specific of Driver Code Edit Box
oUsrTbl.Name = Left(oBPN.Value, 30) 'Item Specific of Name Edit Box
oUsrTbl.UserFields.Fields.Item("U_FullName").Value = oMFN.Value
oUsrTbl.UserFields.Fields.Item("U_FatherName").Value = oFTHN.Value
oUsrTbl.UserFields.Fields.Item("U_BirthDate").Value = oDOB.Value
oUsrTbl.UserFields.Fields.Item("U_PhoneNo").Value = oPHN.Value
(Similar For rest ofthe fields)
Res = oUsrTbl.Add()
Just let me know that is this necessary to do like above.. To be frank there are few more fields and matrices on the form which I didn't mentioned. I am just trying to get recovered from first step to proceed further.
Regards -
help needed for writing query
i have the following tables(with data) as mentioned below
FK*-foregin key (SUBJECTS)
FK**-foregin key (COMBINATION)
1)SUBJECTS(table name)
SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
2 02 Computer Science
3 03 Physics
4 04 Chemistry
5 05 Mathematics
7 07 Commerce
8 08 Computer Applications
9 09 Biology
2)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
383 S1 9 4 2 3
384 S2 4 2 5 3
---------I actually designed the ABOVE table also like this
3) a)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
383 S1
384 S2
b)COMBINATION_DET
COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
1 383 9
2 383 4
3 383 2
4 383 3
5 384 4
6 384 2
7 384 5
8 384 3
Business rule: a combination consists of a maximum of 4 subjects (must contain)
and the user is less relevant to a COMB_NAME(name of combinations) but user need
the subjects contained in combinations
i need the following output
COMB_ID COMB_NAME SUBJECT1 SUBJECT2 SUBJECT3 SUBJECT4
383 S1 Biology Chemistry Computer Science Physics
384 S2 Chemistry Computer Science Mathematics Physics
or even this is enough(what i actually needed)
COMB_ID subjects
383 Biology,Chemistry,Computer Science,Physics
384 Chemistry,Computer Science,Mathematics,Physics
you can use any of the COMBINATION table(either (2) or (3))
and i want to know
1)which design is good in this case
(i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
good method to link with same table but if 4 subjects only(and must) comes
detail table is not neccessary )
now i am achieving the result by program-coding in C# after getting the rows from oracle
i am using oracle 9i (also ODP.NET)
i want to know how can i get the result in the stored procedure itsef.
2)how it could be designed in any other way.
any help/suggestion is welcome
thanks for your time --PradeeshWell I forgot the table-alias, here now with:
SELECT C.COMB_ID
, C.COMB_NAME
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
FROM COMBINATION C;
As you need exactly 4 subjects, the columns-solution is just fine I would say. -
Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re
Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help............... -
Dump in Value-Help Component for date
I created a Value-Help-Component for date fields. (I cannot use the standard value help, because I need the help to start in the month, the user is working on).
I am using the Date Navigator to select a date.
If I first change the month with an arrow of the date navigator and then select a date I get a dump in the method IF_WD_CONTEXT_ELEMENT~GET_ATTRIBUTE_REF in line
attr_info = me->node_info->if_wd_context_node_info~get_attribute( name_only ).
, because the element does not have a node_info.
If I just choose a date in the preselected month (without using the arrows of the date navigator) everything is fine.
Does anybody have an idea??
Many thanks in advance.I found the "solution" to the problem myself.
I used the method bind_structure in the component containing the date navigator.
After I replaced it by set_static_attributes it worked without producing dumps.
Very strange! -
File missing (file\BCD error code 0Xc0000034 help need for work!
file missing (file\BCD error code 0Xc0000034 help need for work! what can i do?
have an p 2000 notebook pcHi bobkunkle, welcome to the HP Forums. I understand you cannot boot passed the error you are receiving.
What is the model or product number of your notebook? What version of Windows is installed?
Guide to finding your product number
Which Windows operating system am I running?
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Help need for force to signout All session ! how...
hi
help need for force to signout All session ! how ??
Solved!
Go to Solution.Hi and welcome to the Skype Community,
To force a signout of all instances your Skype is signed into please change your password: https://support.skype.com/en/faq/FA95/how-do-i-change-my-password
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓ -
Help needed for db to xml conversion & vice versa. & other tools
HI GURRUS!
I would like to need a solution for my university assignment ,
I want to create a web service which provides necessary interfaces to create, read (query), update, and delete data from relational db.
It fully utilizes the XML from the database all the way to the web service clients and create web pages that consume the same XML for data entry. i want to acomplish this assignment in J2EE using WebLogic.
I found lot of tools & api's on internet, but need help to suggest that wchih is best for this task & also need some good help to accomplish it more n more easily.
tools & apis are:
1) DB2XML ---> only cretae xml from db & also use "table based mapping"
2)XML-DBMS
3)Hit software's ---> Allora (don't know much about it)
4) Java api WebRowSet
questions:1) which are the best tools and software packages to be used to faciliate creation and maitenance of the XML schema and keeping it in sync with the database?
2)any good tools to create the database schema directly from the XML. Are there tools out there to generate a database access layer based on the XML?
3) Is any one have good java Webrowset example to accomplish that taks(get data from relational db send it to clint as xml using webservice & if client make changes in xml than it sync back the info in relational db)?
Thanks in advanceOops sorry i just want to create a method which saves the created dom document as an xml file.
Thanks in advance ! -
6110 Help needed for new maps!
Hello,
I have a 6110 Nav with pre-loaded, maps of Greece and the Balkans on the supplied 512mb card, but I need maps of Italy, France, Germany, UK as well. Is there a package you would recommend I download from Nokia or Route66 for this need? How do I do this??
Also, I have a new 1 Gig MicroSD card, will I need a bigger one?
Lastly, Will I still be able to use my maps for Greece and Balkans if I download additional maps?
Thank you in advance,
Jasvoxit IS true. the maps are there. install route 66 sync software (delivered with your mobile phone on a dvd), it will ask for an update, install that, select in the route 66 sync software "r66 store", select maps, go to europe, and there you get the "Western Europe" map (costs 99,99 euro, 1,64gb, withouth nordics!) or "Western Europe with Nordics (also costs of 99,99euro, 1,78gb, with nordics). so better get with nordics. you will need at least 2gb card anyway...
but currently route 66 got problems, as they did not link the maps correctly last friday. the "Western Europe with Nordics" is in fact the map without nordics (1,64gb, download interrupted at 92-94%), not clear yet what the map "Western Europe (without nordics)" really is.
as western europe with or without nordics does NOT include greece and baltics, you may also need to get that map, or it may work with your old map together (therefore, i guess you need a card larger than 2gb, or you get western europe without nordics, i do not know the size of the greece/baltics map). but that may fit on a 2 gb card. cards of size up to 8gb are supported (and more)
anyway, to make those maps work, you need to update your mobile phone to firmware 4.22.
guess route66 will fix those wrong linked maps soon.
Message Edited by laxlex on 04-Feb-2008 10:11 AM -
Help needed for Formatted Search
Hai Experts,
would like to ask you some clarification on Formatted Search. In the
query I found $http://$44.2.1 given in the criteria part.
In some articles it was mentioned that, the 44 meant for the table
connected with the form and 2 is field index and so on.
Can you please explain how to find out those numbers and field index.
I need to work out planty of FMS to fetch data into
UDF automatically based on user input.
Regards
AnandHi Anand,
You may check these threads first:
Re: Vendor default GL FMS help
Re: Runtime data calculation
Thanks,
Gordon -
Help needed for using BASIC authentication through JDBCRealm
Help needed.
Hello,
I am doing a degree project, so far it works fine in my local machine, I need to try it on my virtual hosting (as it is a live server).
My project requires JDBCRealm, that is BASIC authentication loading access data from mysql database. Normally this setup can be done in Server.xml file, because my Tomcat hosting is a virtual one, I only have permission to access the web.xml file.
My question is: is it possible to get it done in an alternative way? In web.xml? Some properties file maybe?
Thank you very much.You can set this up for your context using META-INF/context.xml instead of working with server.xml.
Make a directory called META-INF under your webapp ( it'll be at the same level as WEB-INF ). Under this, add a context.xml with all your context specific configuration including the realm. A sample is below
<?xml version="1.0" encoding="UTF-8"?>
<Context path="/myApp" reloadable="true">
<Realm
className="org.apache.catalina.realm.JDBCRealm"
driverName="com.microsoft.jdbc.sqlserver.SQLServerDriver"
connectionURL="jdbc:microsoft:sqlserver://127.0.0.1:1433;DatabaseName=myDB;SelectMethod=Cursor;"
connectionName="username" connectionPassword="password"
digest="MD5" userTable="users" userNameCol="userid" userCredCol="userpassword"
userRoleTable="user_roles" roleNameCol="rolename"
/>
</Context>Hope this helps.
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
---------------------------------------------------------------- -
Query help needed for querybuilder to use with lcm cli
Hi,
I had set up several queries to run with the lcm cli in order to back up personal folders, inboxes, etc. to lcmbiar files to use as backups. I have seen a few posts that are similar, but I have a specific question/concern.
I just recently had to reference one of these back ups only to find it was incomplete. Does the query used by the lcm cli also only pull the first 1000 rows? Is there a way to change this limit somwhere?
Also, since when importing this lcmbiar file for something 'generic' like 'all personal folders', pulls in WAY too much stuff, is there a better way to limit this? I am open to suggestions, but it would almost be better if I could create individual lcmbiar output files on a per user basis. This way, when/if I need to restore someone's personal folder contents, for example, I could find them by username and import just that lcmbiar file, as opposed to all 3000 of our users. I am not quite sure how to accomplish this...
Currently, with my limited windows scripting knowledge, I have set up a bat script to run each morning, that creates a 'runtime' properties file from a template, such that the lcmbiar file gets named uniquely for that day and its content. Then I call the lcm_cli using the proper command. The query within the properties file is currently very straightforward - select * from CI_INFOOBJECTS WHERE SI_ANCESTOR = 18.
To do what I want to do...
1) I'd first need a current list of usernames in a text file, that could be read (?) in and parsed to single out each user (remember we are talking about 3000) - not sure the best way to get this.
2) Then instead of just updating the the lcmbiar file name with a unique name as I do currently, I would also update the query (which would be different altogether): SELECT * from CI_INFOOBJECTS where SI_OWNER = '<username>' AND SI_ANCESTOR = 18.
In theory, that would grab everything owned by that user in their personal folder - right? and write it to its own lcmbiar file to a location I specify.
I just think chunking something like this is more effective and BO has no built in back up capability that already does this. We are on BO 4.0 SP7 right now, move to 4.1 SP4 over the summer.
Any thoughts on this would be much appreciated.
thanks,
MissyJust wanted to pass along that SAP Support pointed me to KBA 1969259 which had some good example queries in it (they were helping me with a concern I had over the lcmbiar file output, not with query design). I was able to tweak one of the sample queries in this KBA to give me more of what I was after...
SELECT TOP 10000 static, relationships, SI_PARENT_FOLDER_CUID, SI_OWNER, SI_PATH FROM CI_INFOOBJECTS,CI_APPOBJECTS,CI_SYSTEMOBJECTS WHERE (DESCENDENTS ("si_name='Folder Hierarchy'","si_name='<username>'"))
This exports inboxes, personal folders, categories, and roles, which is more than I was after, but still necessary to back up.. so in a way, it is actually better because I have one lcmbiar file per user - contains all their 'personal' objects.
So between narrowing down my set of users to only those who actually have saved things to their personal folder and now having a query that actually returns what I expect it to return, along with the help below for a job to clean up these excessive amounts of promotion jobs I am now creating... I am all set!
Hopefully this can help someone else too!
Thanks,
missy -
XMLAGG structure, performance help needed for odd nesting in schema
Hello,
I have to produce XML to look like:
<?xml version='1.0'?>
<enterprise>
<membership>
<sourcedid>
<id>PHYS_101_001_FA2007</id>
</sourcedid>
<!-- NOTE: absence of "members" level tag for XMLAGG! -->
<member>
<sourcedid>
<id>D2LU0001</id>
</sourcedid>
<role roletype="Sample Role">
<status>1</status>
</role>
</member>
<member>
<sourcedid>
<id>D2LU0002</id>
</sourcedid>
<role roletype="Sample Role">
<status>1</status>
</role>
</member>
</membership>
</enterprise>This would be straightforward if the schema allowed for a "<members>" tag under which to nest the <member> tags. But, it does not allow for that tag or any other than those listed above.
I have a query which does produce that output (except for the roletype attribute), but its performance is horrible; it takes about 40 minutes to return data:
SELECT
XMLROOT(
XMLELEMENT("enterprise",
XMLAGG(
XMLELEMENT("membership",
XMLFOREST( XMLELEMENT("id",cx.mapped_course_id) as "sourcedid"
(SELECT XMLAGG(
XMLELEMENT("member",
XMLFOREST(XMLELEMENT("id",spriden_id) AS "sourcedid",
XMLELEMENT("status",'1') AS "role"
FROM enrollments_fall_sfrstca efs
, spriden sp
, gzv_tuid t
WHERE sp.spriden_change_ind IS NULL
AND sp.spriden_pidm = t.pidm
AND t.tuid = efs.user_name
AND efs.mapped_course_id = cx.mapped_course_id
AND efs.term = cx.semester
, VERSION '1.0', STANDALONE NO VALUE)
FROM courses_xt cx
WHERE cx.semester = :term_code
;Similar queries are producing courses and users XML fine with no performance issues, but these are driven off either the courses view or the enrollments view, but not both.
Is there some other way I can produce the nesting I need for the vendor's schema?
The source views are basically as follows (showing relevant columns only):
courses_xt:
MAPPED_COURSE_ID SEMEST
AVFT209-13307-201210 201210
AVFT210-13308-201210 201210enrollments_fall_sfrstca:
MAPPED_COURSE_ID USER_NAME
AVFT209-13307-201210 FULLERC8
AVFT209-13307-201210 SHUPEK
AVFT209-13307-201210 NOMAN
AVFT210-13308-201210 SHUPEK
AVFT210-13308-201210 PELLONMWhen I have the query without the XML (with the subquery as a column of the outer query), this returns the correct data quickly (a couple of minutes).
I have tried various permutations of XMLFOREST, XMLELEMENT, XMLAGG but either I get syntax errors, or the data is wrong (e.g. repeated '<membership>' for each '<member>', or I have to create an invalid tag '<members>' to be filtered later).
Please advise!
Thanks,
Anita LeesHi Anita,
Have you tried with a GROUP BY and no subquery?
Here's an example using SCOTT schema.
I've used the same tag names and structure so that you can see the analogy :
SELECT XMLElement("enterprise",
XMLAgg(
XMLElement("membership",
XMLElement("sourceid", xmlelement("id", d.deptno))
, XMLAgg(
XMLElement("member",
XMLElement("sourceid",
XMLElement("id", e.empno)
, XMLElement("role",
XMLAttributes(e.job as "roletype")
, XMLElement("status", '1')
FROM scott.dept d
LEFT OUTER JOIN scott.emp e ON e.deptno = d.deptno
WHERE d.deptno IN (10,20)
GROUP BY d.deptno
;which gives :
<enterprise>
<membership>
<sourceid>
<id>10</id>
</sourceid>
<member>
<sourceid>
<id>7782</id>
</sourceid>
<role roletype="MANAGER">
<status>1</status>
</role>
</member>
<member>
<sourceid>
<id>7934</id>
</sourceid>
<role roletype="CLERK">
<status>1</status>
</role>
</member>
<member>
<sourceid>
<id>7839</id>
</sourceid>
<role roletype="PRESIDENT">
<status>1</status>
</role>
</member>
</membership>
<membership>
<sourceid>
<id>20</id>
</sourceid>
<member>
<sourceid>
<id>7369</id>
</sourceid>
<role roletype="CLERK">
<status>1</status>
</role>
</member>
<member>
<sourceid>
<id>7902</id>
</sourceid>
<role roletype="ANALYST">
<status>1</status>
</role>
</member>
<member>
<sourceid>
<id>7566</id>
</sourceid>
<role roletype="MANAGER">
<status>1</status>
</role>
</member>
</membership>
</enterprise> -
Help needed for grouping.
Hi,
Help needed .
I have an internal table having 6 .
Ex :
f1 f2 f3 f4 f5 f6
a aa 11 p1 10 10
a aa 12 p1 20 20
b aa 11 p2 30 30
b aa 12 p2 40 30
Now i want to sum the fields f5 and f6 individually and need to display based upon the fields f1 and f4.
To Display :
f1 f2 f3 f4 f5 f6
a aa 11 p1 30 30.
b aa 11 p2 70 60.
can anyone help me.How to do this..?
ThanksHere you go
DATA:
BEGIN OF cur_tab OCCURS 0,
f1 TYPE c,
f2(2) TYPE c,
f3(2) TYPE c,
f4(2) TYPE c,
f5(2) TYPE c,
f6(2) TYPE n,
END OF cur_tab.
DATA:
BEGIN OF sum_tab OCCURS 0,
f1 TYPE c,
f4(2) TYPE c,
f5 TYPE p,
f6 TYPE p,
END OF sum_tab.
DATA:
BEGIN OF final_tab OCCURS 0,
f1 TYPE c,
f2(2) TYPE c,
f3(2) TYPE c,
f4(2) TYPE c,
f5(5) TYPE c,
f6(5) TYPE c,
END OF final_tab.
START-OF-SELECTION.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '10'.
cur_tab-f6 = '10'.
APPEND cur_tab.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '20'.
cur_tab-f6 = '20'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '30'.
cur_tab-f6 = '30'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '40'.
cur_tab-f6 = '30'.
APPEND cur_tab.
LOOP AT cur_tab.
MOVE-CORRESPONDING cur_tab TO sum_tab.
COLLECT sum_tab.
ENDLOOP.
LOOP AT sum_tab.
READ TABLE cur_tab WITH KEY f1 = sum_tab-f1
f4 = sum_tab-f4.
IF sy-subrc NE 0.
WRITE:/ 'Something went very wrong'.
CONTINUE.
ENDIF.
MOVE-CORRESPONDING cur_tab TO final_tab.
MOVE-CORRESPONDING sum_tab TO final_tab.
APPEND final_tab.
ENDLOOP.
LOOP AT final_tab.
WRITE:/1 final_tab-f1,
AT 5 final_tab-f2,
AT 10 final_tab-f3,
AT 15 final_tab-f4,
AT 20 final_tab-f5,
AT 25 final_tab-f6.
ENDLOOP.
and the output
a aa 11 p1 30 30
b aa 11 p2 70 60
Maybe you are looking for
-
Urgent advice needed: Road Trip Editing
i used to work as a director (sports and variety) at a TV boardcasting firm in Hong Kong, i have quited recently and now freelancing. i need a mac to do editing while i am on a road trip, it is a reality tv show abt the olympic torch relay, the show
-
Possible to disable closed clamshell (display closed) mode?
I would like to disable the closed clamshell (display closed) mode on my MBP, where you can run the computer with its lid closed if it's attached to an external monitor. I don't ever do this (I use the MBP screen as a second monitor), and this option
-
Hi All I am trying to do excise posting using J1IEX for Noncenvatable material.I have done CAPTURE EXCISE for this GR .Internal excise number is generated,but when I am trying to post this INTERNAL EXCISE NUMBER the error message displayed is : "NO P
-
OBIEE 11.1.1.5.0 Patch13832750 - Pie Chart 3D issue
Hi, Since i apply the patch 13832750 I have an issue with 3D Pie chart. The chart is malformed, there are lines which fall outside the graph.. I uninstalled the patch but the issue persists. Have you already see this problem? Thanks, Adrien
-
We are getting a HUH? Error when saving certain files. Once this error shows up, it will save the document, but will a lways come up when you resave. It only happens on some documents We are on a network and share files, but everyone is working in C