Mapping Exception problem

Hi ,
I have some problem when i was trying to excute my mapping
it throws below exception.
RuntimeException in Message-Mapping transformation: Exception:[com.sap.aii.mappingtool.tf3.IllegalInstanceException: Too many values in first queue in function useOneAsMany. It must have the same number of contexts as second queue.] in class com.sap.aii.mappingtool.flib3.NodeFunctions method useOneAsMany[com.sap.aii.mappingtool.tf3.CBufIter@52c052c0, com.sap.aii.mappingtool.tf3.CBufIter@5c195c19, com.sap.aii.mappingtool.tf3.CBufIter@65726572]
can anybody please look into this. and suggest me ..
Regards,
Sandeep

Hi,
One as many node function takes 3 inputs, first is the source value second is the Howmany times the source value should repeat and third one is where the context should change, here 2nd and 3rd input count should same, otherwise it shows an exception.
Follow this link
Introduction to Context Handling in Message Mapping
And one more is we should pass some value to the One as many node function, so put map with default.

Similar Messages

Send Alerts(e-mail) for errors in SXMB_MONI(message mapping exceptions)

Good afternoon !
        I´m configuring SAP Netweaver PI 7.0(SP13) to use Alert Framework to send Alerts when errors occurs in the interfaces processing.
        I just achieved configure to send alerts when errors ocurrs in the Adapter Framework but, I can´t configure correctly to send alerts when errors ocurred only in SXMB_MONI(for example, message mapping exception in asyncronous interface).
        I just followed the instructions at Michal Krawczyk
weblog(/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step) and, initially, this was not sufficient to start to send alert when errors occurs only on SXMB_MONI, so, I researched and found some configurations to do in CCMS(started from here: http://help.sap.com/saphelp_nw70/helpdata/en/e3/bf3b7a8ccb8040b638ff732c551aeb/content.htm), jobs to start events collectors, etc, and after this, I could see a mail for an message mapping exception. BUT, this message, sent from CCMS to ALM, doesn´t carry out all the message parameters, like message Id, sender(service, interface), receiver(service, interface), that is very important to help to find the message with errors to be solved.
        There is somebody here that already done the Alert configuration to send messages for errors found only in SXMB_MONI(Monitor for processed XML Messages) ?
        There is a better way to achieve this ?
        Thank you for your attention,
        Wilson Rodrigo dos Santos
        SAP Netweaver XI/PI Consultant

Hi
Go through these links and follow it.
ALERTS CONFIG AND STUFF
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
XI: Alerts - Step by step
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
http://help.sap.com/saphelp_nw04s/helpdata/en/d0/d4b54020c6792ae10000000a155106/frameset.htm
Triggering by Calling a Function Module Directly.
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Alerts with variables from the messages payload (XI) u2013 UPDATED
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Simple Steps to Get Descriptive Alerts from BPM in XI
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
Triggering XI Alerts from a User Defined Function
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Throwing Smart Exceptions in XI Graphical Mapping
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
/people/sukumar.natarajan/blog/2007/01/07/how-to-raise-alerts-from-abap-proxy
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/sravya.talanki2/blog/2006/11/22/error-handling-framework-xiout-of-the-box-episode-1
/people/ginger.gatling/blog/2005/06/16/integrating-alerts-into-uwl--its-no-problem
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
http://help.sap.com/saphelp_nw2004s/helpdata/en/56/d5b54020c6792ae10000000a155106/content.ht
http://help.sap.com/saphelp_nw04/helpdata/en/2c/abb2e7ff6311d194c000a0c93033f7/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
check this links.
https://www.sdn.sap.com/irj/sdn/forums
Trouble shooting Alert configuration:
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Alert Inbox
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
Alert Notification Step-by-Step
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Defining Alert Classifications
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Triggering Alerts
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Setting up alerts
Setting up alerts in RZ20
Alert Management
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e04141e8-0f11-2a10-adaa-9d97b062c2df
Alert Notification
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90f449a8-a6db-2910-a386-d2b5999f5751
/people/matt.kangas/blog/2006/06/27/personalized-alert-delivery
Thanks
Saiyog

SXMB_MONI : Mapping exception error - cause unknown

Hi! ALL
I am getting a mapping exception error....
However, if i copy the payload and run it through my test tab it is getting processed successfully.
Is there any other way i can debug this issue....as i do not see any problem with payload or the message mapping and I am getting the following error...
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_mm_204: RuntimeException in Message-Mapping transformatio</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Your help is greatly appreciated!!
Thank you,
Patrick.

Dear Patrick,
As our experts told you can trace by using ST01 and select your ID and start the trace then again test be editing and reactivating the scenario and test it again then you ill came to know if in case any issues.
1. Other way to test the scenario is Goto RWB--> Component Monitoring --> Select Adapter Monitoring --> Then select the TEST MESSAGE TAB and give Interface details inputs or copy or take your pay load from MONI and past here and check and changes are to be made and then test the message there itself .
2. Also as u can test the message in Message Mapping TEST TAB and test the mapping and also parallely do Cache Refresh in SXI_CACHE.
3. You can also check the status of the message in SYSEM STACK of message monitoring this is different from RWB message moni
[http://Host name:PORT/MessagingSystem/monitor/systemStatus.jsp]
4. YOu can also trace the message through this system stack also.
Regards:
Amar Srinivas Eli
Edited by: Amar Srinivas Eli on Jan 30, 2009 8:53 AM

Mapping Exception when using Business service

Hi
I am using a business service for my IDOC to File scenario and its working fine. But when i am using the same Business service in many work spaces for the same scenario, its giving me an Mapping Exception and the one that was working also giving the same problem. Why its so and it could be solved by using a business system in the scenario. But how the problem is happening?
Guide me through this.
Thanks
Vinod

Hi, MK
In XI 3.0 Exchange Infrasturcture, SXMB_MONI (XML Error messages) under SOAP Header --> Error
<SAP:Stack>During the application mapping com/sap/xi/f/_mMa_Fle_To_SDS a com.sap.a.u.mc.i.BeRimEcepio a thown: Fatal Error: com.sap.enielbxlprr.Parser~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
I am looking container element to display this messages in my alert cagegory ???
you know SXMB variables but i could't found to display this error how to found out SAP: stack variable please help
Thanks

Create a web service from java bean and map exceptions to SOAP faults

Hi,
We have to expose our Session stateless EJB3 as web services. I've tried to use annotations and jdev wizard "java bean to web service" and it works fine.
Our problem now is that our methods can throw a business exception that contains a list of error message strings to be presented on the client.
I did not find any way to use annotations to make it build a wsdl with soap fault mapped to our exception class. Neither I could to make the wizard to create wsdl with faults.
As we are exposing already designed and implemented classes as web services, I think the bottom-top (java->wsdl) approach is better that top->botton (wsdl->java). Therefore, I'm looking for a possibility to generate the web services from the java beans and have the exception be mapped to a soap fault message.
We are using jdev 10.1.3.1 and OAS 10.1.3.1., is there a way to map exceptions to soap faults using bottom->top approach?
thank you

A couple of links that may be of help:
http://www.netbeans.org/servlets/ReadMsg?listName=nbj2ee&msgNo=1218
My last question concerning web services:
I have already written a session bean and I'd like to add some methods
as a web service to it, how do I do that?
Or I can only create another bean for a webservice and cannot modify the
original one?You might create web service with existing sources and select you bean. New web services with appropriate lookup method will be generated.
All web service method, that will be exposed in web service, you
should add itself (Pop-up menu Web Service -> Add operation)
http://usersguide.netbeans.org/files/documents/40/73/Chapter9-WebServices.pdf

Mapping exception error in MM-SUS interface

Hi..
I am doing MM-SUS Standard Interfaces, when we are sending the Goods Receipt from R/3 to SUS it is throwing the mapping exception eror. yesterday it was working fine.
Today its not working , I have not made any changes.
it is throwing error in SXMB_MONI. i.e
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM2SUSGoodsReceipt_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException:</SAP:P2>
<SAP:P3>RuntimeException in Message-Mapping transformation</SAP:P3>
<SAP:P4>: Cannot produce target element /ns:ServiceAcknow~</SAP:P4>
In Trace it is showing the error like this.
<Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_MM2SUSGoodsReceipt_ Thrown: com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns:ServiceAcknowledgementInformation/ServiceAcknowledgement/ID. Queue does not have enough values in context. Target XSD requires a value for this element, but target-field mapping does not produce one. XML instance is probably not valid for source XSD, or target-field mapping does not fulfil requirements of target XSD. at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:406) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:134) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:127) at
Pls suggest me , how can i resolve this error.
Regards,
Pasi.

can you please check with the data which was sent yesterday and run the interface , if it is working then i guess in the latest data u are getting the queue values with the more occurance, thats why u r getting this error.
may be u r getting more ID values in ServiceAcknowledgement Node where ID element would be having less occurance.
-Madhav

Mapping exception

Hi All,
I have one mapping exception
Here i describe my mapping
Descrption:(line break)
Text:----
maximum length=132
The above fields are Source fileds.
"Full Description" is the target field.
Here i mapped
Description and Text field mapped UDF and finally mapped to Fulldescription.
In the UDF: return string1System.getProperty("line.separator")string2;
so this mapping correct and successfully process with line break when the for example Text Fied data:my country is India
in XI XML message mapping like that :<Full Description> Descrption: my country is India</Full Description>
Here we pass one condition if full description field more than 2000 chacters it throw error and cancel the process and send mail to particular person.
In this case we test the mapping
Text Field data: my country is India and i am belongs andhrapradesh..........
(more than 2000 chacters)
This above Text field data is in Paragraph wise,so when we can test it XI mapping can read the first line of the paragraph only not readed second line more than 2000 chacters. so at that time it not throws any error.In this case also it is successful
But we need error when more 2000 chacters.so my question how to read all lines of the data? Can you please help me out.
Thank you very much in advance.
Regards
Sateesh

Hi Sateesh,
Just add one more line to your UDF code. It will work.
String temp = string2.replaceAll("\n","");
return string1 System.getProperty("line.separator")temp;
This would resolves your issue.
Regards,
Swetha.

Run-time mapping exception in JDBC Scenario

Hello There,
            We are working on a "Communication between IDOC and JDBC" Scenario where in the IDOC is successfully getting called in SAP XI from an SAP R/3 system. But!, when we try to map the IDOC structure with a JDBC Database structure through a manually created XSD, it gives the following run-time mapping exception :
"During the application mapping com/sap/xi/tf/_RequestMapping_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeException in Message-Mapping transformation"
The following is the XSD that we have created manually for the Target JDBC database table structure which shows the parent-child relationship of the database and is causing the above stated exception :
<?xml version="1.0" encoding="UTF-8"?>

<!W3C Schema generated by XMLSPY v2004 rel. 4 U (http://www.xmlspy.com)>
<xs:schema elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">
     <xs:element name="ACCOUNT_GROUP" type="xs:byte"/>
     <xs:element name="AUTHORIZATION_GROUP" type="xs:byte"/>
     <xs:element name="CITY" type="xs:string"/>
     <xs:element name="CITY_CODE" type="xs:short"/>
     <xs:element name="COMPANY_CODE" type="xs:short"/>
     <xs:element name="COUNTRY_CODE" type="xs:byte"/>
     <xs:element name="COUNTRY_KEY" type="xs:byte"/>
     <xs:element name="CREATED_DATE" type="xs:short"/>
     <xs:element name="CUSTOMER_CLASSIFICATION" type="xs:boolean"/>
     <xs:element name="CUSTOMER_NUMBER" type="xs:short"/>
     <xs:element name="DISTRICT" type="xs:string"/>
     <xs:element name="FAX_NUMBER" type="xs:int"/>
     <xs:element name="FIRST_NAME" type="xs:string"/>
     <xs:element name="GROUP_KEY" type="xs:byte"/>
     <xs:element name="HOUSE_NUMBER" type="xs:date"/>
     <xs:element name="INDUSTRY_KEY" type="xs:byte"/>
     <xs:element name="INTIAL_CONTACT" type="xs:byte"/>
     <xs:element name="LAST_NAME" type="xs:string"/>
     <xs:element name="LOCATION_NUMBER" type="xs:string"/>
     <xs:element name="NAME_PERSON" type="xs:string"/>
     <xs:element name="POSTAL_CODE" type="xs:int"/>
     <xs:element name="REGION" type="xs:string"/>
     <xs:element name="REGIONAL_MARKET" type="xs:byte"/>
     <xs:element name="TELEPHONE_NUMBER" type="xs:long"/>
     <xs:element name="VENDOR_ACCOUNT" type="xs:byte"/>
     <xs:element name="resultset">
          <xs:complexType>
               <xs:sequence>
                    <xs:element ref="row"/>
               </xs:sequence>
          </xs:complexType>
     </xs:element>
     <xs:element name="row">
          <xs:complexType>
               <xs:choice maxOccurs="unbounded">
                    <xs:element ref="CUSTOMER_NUMBER"/>
                    <xs:element ref="COUNTRY_KEY"/>
                    <xs:element ref="FIRST_NAME"/>
                    <xs:element ref="LAST_NAME"/>
                    <xs:element ref="LOCATION_NUMBER"/>
                    <xs:element ref="AUTHORIZATION_GROUP"/>
                    <xs:element ref="INDUSTRY_KEY"/>
                    <xs:element ref="GROUP_KEY"/>
                    <xs:element ref="ACCOUNT_GROUP"/>
                    <xs:element ref="CUSTOMER_CLASSIFICATION"/>
                    <xs:element ref="VENDOR_ACCOUNT"/>
                    <xs:element ref="REGIONAL_MARKET"/>
                    <xs:element ref="INTIAL_CONTACT"/>
                    <xs:element ref="COMPANY_CODE"/>
                    <xs:element ref="CREATED_DATE"/>
                    <xs:element ref="NAME_PERSON"/>
                    <xs:element ref="CITY"/>
                    <xs:element ref="CITY_CODE"/>
                    <xs:element ref="COUNTRY_CODE"/>
                    <xs:element ref="DISTRICT"/>
                    <xs:element ref="FAX_NUMBER"/>
                    <xs:element ref="HOUSE_NUMBER"/>
                    <xs:element ref="POSTAL_CODE"/>
                    <xs:element ref="REGION"/>
                    <xs:element ref="TELEPHONE_NUMBER"/>
               </xs:choice>
          </xs:complexType>
     </xs:element>
</xs:schema>
IS THERE ANY OTHER WAY OF ACHIEVING THE ABOVE TASK OF AUTOMATICALLY GENERATING THE REQUIRED DESTINATION STRUCTURE ON THE JDBC TARGET SYSTEM SIDE ?. PLEASE ADVICE ASAP.
REGARDS ......
K. Venkat!.

Try setting the classpath properly. It seems the runtime evironment is unable to find the compiled class files. Nothing else is wrong.
--Anil

Throw message mapping exception

Hi All,
In message mapping, I am using User defined function for validating 2 fields of the input file. Through this funtion, I want to throw an message mapping exception incase the validation fails.
Can anybody let me know, how can we forcefully throw an exception using java program.
Thanks in advance,
Ashish.

Hi,
You can use something as an incoming schema to validate, see this weblog and at last screen shot you see the result of validations,
/people/jacob.vandborg/blog/2005/11/29/schema-validation-of-incoming-message
You can also see a much detailed validation document here,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/99593f86-0601-0010-059d-d2dd39dceaa0
i think you donot need at this level but just for understanding, (This is for incoming file validations)
Or
you may also use node functions to check if values are coming or not, like exists, and if the value do not exist send a blank space to prevent runtime mapping exceptions,
/people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii point 6
All this can be tried,
All the best,
Anirban.

Simple xml file mapping exception

How come a file with this content works fine:
<?xml version="1.0" encoding="utf-8" ?>
<ns:Data xmlns:ns="http://natoil.com/xi/XI/TestFile">
<Name>Joe</Name>
</ns:Data>
But a file with this content gives a mapping exception:
<?xml version="1.0" encoding="utf-8" ?>
<Data>
<Name>Joe</Name>
</Data>
How can I get the second version to work? What am I not understanding?
thanks-

Hi Henry:)
to achive your scenario:
1. go to the <b>Message Type</b> of your file message (repository)
2. remove <b>XML namespace</b> - you can leave it empty
3. check if your mapping based on this message type works - now it shouldn't show the namespace when you go to <i>Source Document View</i> of the Source message
4. recreate message interface
5. activate it all again
6. now your scenario without the namespace should work:)
Regards,
michal
Message was edited by: Michal Krawczyk

Exception:Problem building schema

Hi all,
I want to make a web service call to a service deployed in weblogic, I copied the wsdl to a local file and I created a PartnerLink referring to the wsdl in my local file. I put an Invoke action, create an input variable, everything work fine. However when I try to explore the input variable I got exception:Problem building schema.
Is there anything wrong with the WSDL? I've validate it and it was ok.
Thanks in advance,
santoso
Here is the WSDL of the service:
<?xml version='1.0' encoding='UTF-8'?>
<definitions name="ProposalWSServiceDefinitions" targetNamespace="http://com/my/ws" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:s0="http://com/my/ws" xmlns:s1="http://schemas.xmlsoap.org/wsdl/soap/">
<types>
<schema attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://www.my.com/opl" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:s0="http://com/my/ws" xmlns:s1="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="http://www.my.com/opl">
<complexType name="Proposal">
<sequence>
<element name="id" type="int"/>
<element name="title" type="string"/>
<element name="creator" type="string"/>
<element name="status" type="string"/>
<element name="customerId" type="int"/>
</sequence>
</complexType>
<element name="ProposalData" type="tns:Proposal"/>
</schema>
<xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" targetNamespace="http://com/my/ws" xmlns:s0="http://com/my/ws" xmlns:s1="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="insertProposal">
<xs:complexType>
<xs:sequence>
<xs:element name="proposal" type="opl:Proposal" xmlns:opl="http://www.my.com/opl"/>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
</types>
<message name="insertProposal">
<part element="s0:insertProposal" name="parameters"/>
</message>
<portType name="ProposalWS">
<operation name="insertProposal" parameterOrder="parameters">
<input message="s0:insertProposal"/>
</operation>
</portType>
<binding name="ProposalWSServiceSoapBinding" type="s0:ProposalWS">
<s1:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="insertProposal">
<s1:operation soapAction="" style="document"/>
<input>
<s1:body parts="parameters" use="literal"/>
</input>
</operation>
</binding>
<service name="ProposalWSService">
<port binding="s0:ProposalWSServiceSoapBinding" name="ProposalWSSoapPort">
<s1:address location="http://172.16.208.45:7001/SBSWebService/ProposalWS"/>
</port>
</service>
</definitions>

I've solved it just by upgrading to BPEL 10.1.3.1 (was 10.1.2.0)

Installing ios8.2 does not resolve Google map navigation problem or gps tracking!

Installing ios 8.2 does not resolve Google map navigation problem.

I have tried to install both of them lots of times but in each case I receive the same in my XE.bat file:
Instance created.
DIM-00019: create service error
O/S-Error: (OS 1387) Unable to add or remove a member from the local group because this member does not exist.
Have checked OS 1387 error at Microsoft Support and as possible cause of the problem they give as follows:
This issue can occur if the environment has a disjointed namespace (i.e. the domain has different NetBIOS and DNS names). For example, assume that the domain has a NetBIOS name of "domain.com" and a DNS name of "domain-old.com." When users are added in the Windows UI, they are displayed in the format of domain\ComputerName. However, you notice in the error log that there was an attempt to add a computer account in the format of domain-old\ComputerName. (System Center 2012 R2 Data Protection Manager install fails and generates ID: 4323: "A member could not be added")
Tried to find out my DNS name, but it is impossible because I don't have any domain installed and my machine is not connected to it. Some other blog (Install Oracle 11gR2 on Windows) advices to work with adding my computer account to some non-real windows domain (just for the purpose of resolving the network) as well and reinstall the database then. If I undestand it right I need minimum 2 machines for this. But I own just one, where the server is based and thought that is enough to run the database... no idea ..

Mapping Exceptions

How do we deal with Exceptions in mapping

Hi,
to add on-
1) You can write a mapping logic in such a way that, if mapping fails, send an Email/Send an Error File
2) Sending an Alert - http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/content.htm
For mapping Exceptions-
For mapping exceptions~
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
/people/sap.user72/blog/2005/02/23/raising-exceptions-in-sap-xi-mapping
Hope this helps,
Regards,
Moorthy

XSLT mapping - namespace problem?

Hello,
I am trying to proces a message with the following format:
<XMLMESSAGE xsi:nonamespaceSchemalocation='schema.xsd' >
   <ORDER>
     <HEADER>
     </HEADER>
     <ITEM>
     </ITEM
</ORDER>
<XMLMESSAGE>
the mapping (XSLT or message mapping) throws an exception. During runtime or test, this is the same.
The problem occurs, I think, because of the nonamespace atriibute. If a change or remove the value, the mapping is fine.
Does anybody know if I should save the file mentioned in the attribute somewhere? Or is there a workaround for this problem?
thnx, Paul
PS: we are using PI 7.0.

Hi Russ (and others),
I tested it in the real example, but it still throws the same error on the java (=compiled) mapping.
this is my input:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ORDER [
<!ENTITY % iso-lat1 PUBLIC "ISO 8879:1986//ENTITIES Added Latin 1//EN//XML" "http://www.oasis-open.org/docbook/xmlcharent/0.3/iso-lat1.ent">
%iso-lat1;
]>
<XMLMESSAGE xmlns:xsi="http://www.w3.org/2000/10/XMLSchema-instance" xsi:noNamespaceSchemaLocation="OrderBericht.xsd">
     <ORDER>
          <HEADER>
               <ACCOUNT_NUMBER></ACCOUNT_NUMBER>
          </HEADER>
          <LINE_ITEMS>
               <ITEM>
                    <LINE>1</LINE>
               </ITEM>
          </LINE_ITEMS>
     </ORDER>
</XMLMESSAGE>
this is my xslt:
<?xml version='1.0' ?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:output method="xml" version="1.0" encoding="UTF-8" omit-xml-declaration="no" standalone="no" indent="yes"/>
     <xsl:template match="/">
          <ORDERS05 xmlns="com:root">
               <IDOC BEGIN="1">
                   <xsl:call-template name="CrtEDIDC40"/>
               </IDOC>
          </ORDERS05>
     </xsl:template>
     <xsl:template name="CrtEDIDC40">
          <EDI_DC40 SEGMENT="1">
               <TABNAM>EDI_DC40</TABNAM>
               <SNDPRT>LS</SNDPRT>
               <SNDPRN>XIDCLNT300</SNDPRN>
          </EDI_DC40>
     </xsl:template>
</xsl:stylesheet>
and this is the error:
18:00:41 Start of test
Creating XSLT mapping mindef_test
Call XSLT processor with stylsheet mindef_test.xsl.
Method error called terminate transformation
javax.xml.transform.TransformerException: IOException occurred while parsing stream. An empty document will be used! at com.sap.engine.lib.jaxp.TransformerImpl.transformWithStylesheet(TransformerImpl.java:351) at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:240) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingTransformer.transform(RepMappingTransformer.java:150) at com.sap.aii.ibrep.server.mapping.ibrun.RepXSLTMapping.execute(RepXSLTMapping.java:81) at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107) at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127) at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104) at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0.transform(MapServiceRemoteObjectImpl0.java:167) at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0p4_Skel.dispatch(MapServiceRemoteObjectImpl0p4_Skel.java:104) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:320) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:198) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:129) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Caused by: java.io.IOException: Failed to load resource from the context classloader of the current thread! Loading from classloader was caused by: java.net.UnknownHostException: www.oasis-open.org at com.sap.engine.lib.xml.parser.URLLoaderBase.resolveEntity(URLLoaderBase.java:148) at com.sap.engine.lib.xml.parser.helpers.AdvancedXMLStreamReader.addInputFromEntity(AdvancedXMLStreamReader.java:393) at com.sap.engine.lib.xml.parser.XMLParser.handleDTDReference(XMLParser.java:2267) at com.sap.engine.lib.xml.parser.XMLParser.scanIntSubset(XMLParser.java:1057) at com.sap.engine.lib.xml.parser.XMLParser.scanDTD(XMLParser.java:1246) at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2795) at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2830) at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:229) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:160) at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:261) at com.sap.engine.lib.jaxp.TransformerImpl.transformWithStylesheet(TransformerImpl.java:347) ... 19 more --------- java.io.IOException: Failed to load resource from the context classloader of the current thread! Loading from classloader was caused by: java.net.UnknownHostException: www.oasis-open.org at com.sap.engine.lib.xml.parser.URLLoaderBase.resolveEntity(URLLoaderBase.java:148)
any ideas? I am totally lost here.

EDI file Mapping.. problem with UNT segment..!!

Hi all,
Anyone who worked on EDI files, pls help me..
Doing Idoc to EDI scenario..
I done for all the mapping for all the fields except for the UNT segment and field D_0074
Here i need to provide no of segments in the EDI file...
like
*UNBUNOA:393777:ZZ93139:ZZ080108:09080+++1'
UNH0000016334368DESADV:D:01B:UN:EAN007'
BGM3510094147783+9'
DTM+137:200801080934:203'
DTM+11:200801080934:203'
DTM+17:200801100000:203'
ALI++168165'
RFF+ON:R-08007E'
DTM+171:20080107:102'
NADSU377996::92'
NADST9418GR::92'
CPS1+5'
PAC9+09::9'
MEAPDAAA+KGM:6306.628'
MEACTNPP+NAR:9'
CPS21+3'
PAC109::9F:CHEP'
MEAPDAAA+KGM:256.828'
PCI+33E'
GINAW393100471000832922'
LIN1+19310047208023:SRV'
QTY+12:44'
DTM+36:20090505:102'
CNT+2:2'
UNT240000016334368'
If you observe the above file which is my resultant file.. I need to count all the segments above UNT and pass the value( here total segments are 24) to D_0074 field .
Is it any way we can count all the segments.. and pass the value??
Kindly suggest me ..
waiting for your replys..
Regards
Seema.

Problem here is ..
They have created only SCv Seebutger_EDI_Adpater
but they haven't created for Seebutger_GENERIC_EDI ..
all those mappings will be under Seebutger_GENERIC_EDI .. which they haven;t installed..
thats the problem..
If any one has that UDF .. kindly let me know..
-Seema.

Mapping Exception problem

Similar Messages

Maybe you are looking for