Mapping for component Not Found Error ?

Hi does anyone know how this error can be fixed I am trying to refer to a compnent called task and it
is saying I have not mapped it yet it has been mapped inside my coldbox framework ?
The error I get is:
Coldfusion.orm.EntityMappingNotFoundException: mapping for component task not found
Any help would greatly be appreciated on this.
Thanks

When using ORM generator to generate cfcs make sure that Application.cfc has unique app names in order to solve the problem above.

Similar Messages

AddOnRegDataGen - Component not found error

With version 2004 the AddOnRegDataGen worked fine. But now I upgraded to 2005A and when I try to run the AddOnRegDataGen I'm getting an component not found error message, saying that the file 'xerces-c_2_4_0.dll' could not be found. I also reinstalled the SBO SDK, but still the same error.
And I'm getting the same error when I try to use the 'B1 AddOnInstaller Setup .NET Wizard' from the SBO development tools.
How can I fix that problem?

Hi Nico,
When I create installation I also met lots of problems and I am using SBO 2005, my experience to workaroud the problem of object can not found, is to uninstall all SBO application, include server,client and SDK all companents, then install all of them in the default given install folder, this problem may disappear.
Best regards.
Lanjun

Instructions for "Actionlist Not Found" error didn't work

i received the actionlist not found error and despite following the corrective instructions three times, i'm still unable to install adobe flshplayer for internet explorer...any help?
...i also perfomed a clean uninstall of flashplayer the second time but didn't work

I don't know what "corrective instructions" you are referring to, but if you use the offline installer, you shouldn't get that message any more.

Scanjet G4050 Doesn't Scan - Software Component not found error message

Problem:
I have installed and un/installed the software for this Scanjet G4050. It aways completes the installation successful. All seems fine until I push the SCAN Buttion on the scanner. It launchs the software then abruptly displays an Error! window which says "A required software component was not found..." then says to reinstall the software. I unistall the software and reinstall with exact same results at least 4 times. I have downloaded the lastest software from the download HP web page with exact results. The error info listed is 8,[(8,0,0)].
The COPY button and software works. I can scan preview the same photo in the copy mode, crop it, etc. and print it, but the SCAN button always fails with the Error! message. I think I can throw this HP Scanjet G4050 scanner a good 25 feet. But before it gets launched.... hmmm... maybe Yardapult?
This is a Windows XP (SP3), Dell Precision 360 system.
9/16/14 After following the Waterboy71's suggestion to post this on the Commercial Forums with zero resulsts, I finally threw in the towel. (I need this scanner for work) Returned the Scanjet G4050. Bought and Epson V550. Scanned the very 1st time. Now I can get back to work. I should have pulled the plug sooner. There's just seems to be too many problems with the G4050. What has happened to HP?

Hello Edmo13,
Welcome to the HP Forums.
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Web Reference inside Script Task causes Binary code for script not found error

I am attempting to access a SOAP web API (sales force) from a SSIS package. To do this I created a script task.
Inside the script task I went to Add Service Reference. Then I click advanced to make it a web reference. Then I point it to the WSDL file and give it a name SFEnterprise. It successfully finds and adds the Web Reference to the script task.
I leave scriptMain.cs alone and I have no warnrings and no errors. Now in the solution explorer I right-click the script task and hit BUILD. I see the message from Output that BUILD succeeded.
I close the VSTA script editor and now I am back on the control flow window. However I have a red X on the script task with the following message. "The Binary code for the script is not found. Please open the script in the designer by clicking EditScript
button and make sure it builds successfully"
But it does build successfully! And I have not even added any custom code except for the web reference using the WSDL file.
I am using SSIS 2012 and Visual Studio 2012. I have been reading about this binary code error message on Google searches and suggestions about delay validation and turning off pre-compile do not apply to SSIS 2012.
Is SSIS not capable of doing this?

I was wanting to use the 2.0 coding style of accessing the soap service which is supported by adding the web reference vs. adding a service reference. But using a service reference instead of web reference actually allows the script task to compile. This
is really odd behavior. I wonder why one works and not the other.
Changing my C# code over to service reference coding style to access the SOAP service was still returning an error. When I added a break point I found the error message "Could not find default endpoint element that references contract in the ServiceModel
client configuration section"when calling new SoapClient();
I found this page http://www.sqlis.com/sqlis/post/Where-is-my-appconfig-for-SSIS.aspx and after I copied the System.ServiceModel app settings from the script task app.config to the DTSDebugHost.exe.config it was able to successfully login to the endpoint
during package debug mode.
This means I will have to edit the SQL Server DTS config files on the prod SSIS server to get the package to actually run in the job agent.
So for now I am good I think just plugging away at coding what the script task is actually supposed to do now that is can actually login.

Please Help; MAPVIEWER-05501 Map tile layer not found error

Hi, I am just a newbie to oracle mapviewer; I installed mv 11.x. on Xe 11g with mvdemo dataset as mentioned in demo setup instructions.
It seems everything went fine including mvdemo data import and oc4j instance.
Only thing if i am missing is when I goto create "Create a map tile layer" in "Manage MapViewer" of "Admin" page; I can find datasource but do not find anything in "base map" combo. Thus i can't create Any Map tile.
Now, when I click on a demo example I get following error:
*[MVglobalvariables.getmap.cacheconfig]mapviewer-05501:maptile layer not found.check map tile layer name and/or data source name(mvdemo.demo_map)*
When i check the user_sdo_cached_maps view return "no rows selected ".
I have tried many restarts, re-import of mvdemo data but nothing worked.
please help me.
Regards

Thanks Anyway I have found the solution, indeed I was missing the metadata script using @mvdemo.SQL.
I Followed the instructions on the sites given below:
http://gerardnico.com/wiki/spatial/mapviewer/mapviewer_demo_installation
http://www.dbuggr.com/smallwei/step-step-instruction-install-oracle-mapviewer-10g-10-1-3-1/

Getting MAPVIEWER-05501 Map tile layer not found error !

I keep getting an error messages basically saying that the application cannot find my
map tile (or map cache) layer. It seems to be looking for it using "datasourceName.CacheName".
I must be usiing the wrong attribute or identifier for this but don't know where to look to
see what it is currently set to.
Looking for a method to trouble shoot this error and fix it.

Look in the MapViewer Admin console's Manage Map Tile Layers page i.e. host:port/mapviewer/faces/admin/admin_ds.jspx
You should see entries for existing data sources and tile layers like
Name Data Source Base map Zoom levels Internal Tile width Tile height Online
DEMO_MAP MVDEMO DEMO_MAP 10 true 256 256 true
If the data source and map tile layer name combination you're using is not there then one has to be created.
Assuming the base map is defined click on Create to create a new tile layer.
If you're using the mvdemo.dmp sample dataset there are an additional step required after importing the dmp file.
i.e. run mvdemo.sql as the map tile layer instances are created by this script.
See mapviewer/fsmc/tutorial/setup.html

"Mapping not found" Error related to cellular (or slow) connection?

I have an app that uses ORM rather extensively. For the most part it works like a charm. I only have an intermittent error that seems to occur exclusively when the app is accessed on an iPad using data (as opposed to WiFi).
I have users accessing this app in the field and occasionally they will get that obnoxious "Mapping for component (fill in the blank) not found". Only, it was clearly found earlier and if the user logs out and back in, or closes the browser and starts over, the error goes away.
The error throws on a <cfajaxproxy> tag at the beginning of a page load.
Any thoughts?

You call the unit method for purpose.The data or whatever you do is needed to show it in a table, or initialize a text field. You have e.g. bound the table to the bean. So if you unit the data for the table you can use the getter for the table.
I don't know why it works if you select only some rows. It's difficult to say without seeing all evidence. Reading unformatted code doesn't make it easier (not your fault that the forum editor can't format properly).
If you use a getter to check if the data is already initialized you can use a variable which is set to null at first. You check this variable and if it's null you unit the data and set the variable to anything but null.
Timo

Interface Mapping not found error

I'm getting "Interface Mapping <name> (SWCV=<id>) not found" error during runtime. I did not do anything to the specified interface mapping. If I go into the repository and put into modify mode, add space to description, save, activate, it all works fine. Any idea why my interface mappings are getting "lost" in the runtime cache... any way to do a bulk reload of repository objects into the runtime cache?

Hi Tadd,
It may help to eliminate the possible erros:
1) In the Runtime Workbench, simulate the message in the Component Monitoring / Adapter Engine. If this does not work:
2) Try to restart the JVM. I have seen sometimes that the mapping functions stored as Java files do not get refreshed.
Cheers,
Bhanu

HT1349 i've had i tunes on my puter for years....yesterday i clicked on some "updates"....now i canNOT get into i tunes it says to reinstall to fix i did that then it keeps saying: MSVCR80.dll component not found. i have no idea how to fix this. i need

cannot reinstall I TUNES on my computer windows 7 vissta. it's worked until i updated two days ago. it keeps saying MSVCR80.dll component not found. the error 7 windows error 126. i have uninstalled and reinstalled number of times. i have no idea where or what MSVCR80.dll is or went. thank you.

The same for me. Using iTunes for years then the update to the new verison failed. Cannot find MSVCR80.dll and I did the reinstall as recommended on the error window. Disater, now I get additiona erros: Windows error 126 and Apple mobile divice cannot determine my priviledges, even running as administrator. From now on I will create a restore point before updating apple products. Never had a problem with itunes or any other Apple program in the past. I cannot find a thread where Apple reconizes the problem and is working a fix.

FILE not found error: j2ee/home/applib/applications-mapping.xml (No such fi

Hi EveryBody
i have my applications-mapping.xml file already in the applib directory, but when i try to conect to a remote ejb i had this error[b]
FILE not found error: j2ee/home/applib/applications-mapping.xml (No such file or directory)
can anyone help??

gday
Is the error on the client or server?
What role in the application does applications-mapping.xml fulfill?
How are you loading the file in?
-steve-

"File not Found" error in the admin console for dimension

Hi All,
We are onto the BPC7 MS version and recently we have started facing an error "File Not Found" while trying to access the dimension members from the admin console.
I have checked the "adminapp" folder where all the dimension files should be placed in the system, the files are present in the folder.
The mbr<DIMENSION> tables are also present in the database and have the members intact.
I have also tried with processing the dimensions (NOT processing from the membersheet) and it goes successful, but still face the same "File Not Found" Error.
We have a single appset and a single application.
Regards
Raghav

Hi Sorin,
Where can I check the File path if it is set incorrect?
I am recieving this message for all the dimensions, even when I click on the "maintain dimension members", try to process or even try to copy them i have this pop up showing "file not found".
I have the dimension tables intact at the DB servers and they have the members in them.
Regards
Raghav

With 3.6.12, Help menu item "For Internet Explorer Users" results in a "Page Not Found" error. Is this a known bug? Is it being addressed?

Clicking the 3.6.12 Help menu item "For Internet Explorers" item results in a "Page Not Found" error.
The URL of the resultant page is https://support.mozilla.com/en-US/kb/Windows%20start%20page?as=u
Is this a known bug, if so, is it being addressed? If so, someone needs to work faster.
If it is not a known bug, someone needs to get right on it - you want people to switch to Firefox and then there is this bug -- not a good way to impress Internet Explorer users.

Hi Claudio Roca,
I have encountered the same problem. Do you found the solution for this issue? I will much appreciated if you willing to share your solution and email to [email protected] Thank you so much.
Regards,
Hau Chee

Class not found error for applet.

This is probally a really simple mistake but I've tried everything and can't find it.
My applet works fine with applet viewer - I'm running it from JBuilder. But when I open my html file in the browser it gives me a 'Class not found' error. I've tried running other applets (my own and demos on this site) and they work fine.This is the applet tag code:
<applet code = "Rotary.class" width = "650" height = "580" align = "top">

<param name = "sector0" value ="234,215,244,207,154,43,125,63">
</applet>
The class file is in the same directory as the HTML file. Do I need to specify the codebase? I tried that too - giving it the full pathname of the class.
In the Java console it said that it couldn't find "C:Project\Rotary\javax\swing\japplet"
I don't think it could have anything to do with the fact that I'm using swing because the other applets I used used swing.
Please help - I'm really running out of ideas here!

You have a similar problem like I had.
You seem to have a too old JAVA environment for the browser - I had a too new environment.
For all who are experiencing the same problem!
Problem:
You're compiling your applets with a quiet modern compiler (i.e. Netbeans Version 3.5.1)
You are able to compile your applets without any problems but if you try your applets in "real life", the browsers can't interpret your applets [class not found]. (I tested Internet Explorer 6.0 and Netscape Navigator 4.7)
So you need a plugin for the new JAVA environment because the JAVA environment of the browser is older than that which the applet needs.
Well, you have the choice to demand to every user of your applet to download the new Java Runtime Environment, but then don't wonder why nobody visits your site!
But, don't worry: I figuered out another solution, that Netbeans (www.netbeans.org) allows to compile in different JAVA versions.
Solution:
What you have to do is:
- Install a previous version of JDK (i.e. JDK 1.3 - I would suggest, lower versions don't work with Netbeans 3.5.1 and JDK 1.3 is enough for IE 6.0 and NN 4.7, which I tested)
- Go into the "bin"-directory of Netbeans (i.e. c:/netbeans3.5.1/bin)
- Open the file "ide.cfg" (with notepad or any other texteditor)
- You see a line like: jdkhome "C:\java\j2sdk1.4.2" -J-Xmx96m -J-Xss1024k -J-Xms24m -J-Xverify:none
- Change the path to your other JDK you wish, like: jdkhome "C:\java\jdk1.3" -J-Xmx96m -J-Xss1024k -J-Xms24m -J-Xverify:none
- That's it, you can compile your applets in a previous version of JAVA so that "older" browser user don't have to install a plugin for the new JAVA environment.
Have fun!
If you have any questions I would be pleased to help you.
If this tip helped you already I would be pleased if you would send me a quick email with your experience.
My email: [email protected]

"javadoc not found" error for javax package in netbeans.

I am using jmf api on windows under netbeans. But problem is that netbeans do not display documentation for jmf methods . Instead it shows "javadoc not found"
error. Can someone plz help me how to configure the javadoc for jmf.

I am using jmf api on windows under netbeans. But problem is that netbeans do not display documentation for jmf methods . Instead it shows "javadoc not found"
error. Can someone plz help me how to configure the javadoc for jmf.Download api docs from [http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/specdownload.html] ....
Then in NetBeans:
Tools > Java Platforms > "JDK 1.x (Default)" > "Javadoc" tab > "Add zip/folder" button.....
Add the path of the jmf javadoc zip (or you may have to extract the zip)
You may not see the changes immediately, try restarting NetBeans....
Thanks!

Mapping for component Not Found Error ?

Similar Messages

Maybe you are looking for