Mapping issue: from unbound node to two single fields

Hello,
I have a source message with a node that is 0... unbounded.
The node contains a field named "component_name" with occurence 1..1.
The target message contains only two single fields (component1, component2) and the task is to provide the first two occurences to these fields.
node occ.1
   component <modul beta>      ->    component1
node occ.2
   component <modul omega>      ->    component2
We can expect to have any case like these:
node is 0   -> no components provided
node is 1 -> one component provided (usual case) , so second field will be empty
node is 2 -> two components provided
node is > 2 -> need to pick the first two components to provide them to the target fields.
Does anybody here have an idea how to solve this mapping issue?
Your ideas are really welcome!
Best regards
Dirk

Stefan's solution is very good, alternatively, if you are sure that you will always have at least two items you can do
source -> copyValue[0]-> target
source -> copyValue[1]-> target
please note: if you don't have at least two items in your source the copyValue function will throw an exception

Similar Messages

RAC-DATA FILE ACCESSING ISSUE FROM ONE NODE

Dear All,
We have a two node RAC (10.2.0.3)running on Hp Unix. From yesterday onwards, from one instance accessing data from a specific data file showing the below error, whereas accessing from other node to the same datafile is working properly.
Errors in file /oracle/product/admin/tap3plus/bdump/tap3plus4_dbw0_24950.trc:
ORA-01157: cannot identify/lock data file 75 - see DBWR trace file
ORA-01110: data file 75: '/dev/vg_rac/rraw_tap3plus_temp_live05'
ORA-27041: unable to open file
HPUX-ia64 Error: 19: No such device
Additional information: 2
Tue Jan 31 08:52:09 2012
Errors in file /oracle/product/admin/tap3plus/bdump/tap3plus4_dbw0_24950.trc:
ORA-01186: file 75 failed verification tests
ORA-01157: cannot identify/lock data file 75 - see DBWR trace file
ORA-01110: data file 75: '/dev/vg_rac/rraw_tap3plus_temp_live05'
Tue Jan 31 08:52:09 2012
File 75 not verified due to error ORA-01157
Tue Jan 31 08:52:09 2012
Thanks in Advance

user585870 wrote:
We have a two node RAC (10.2.0.3)running on Hp Unix. From yesterday onwards, from one instance accessing data from a specific data file showing the below error, whereas accessing from other node to the same datafile is working properly.That would be due to some kind of failure in the shared storage layer.
RAC needs the very same storage layer to be visible and available on each RAC node - thus this needs to be some form of shared cluster storage.
Should a piece of it fails on one node, that node would not be able to access the RAC database files on that shared storage layer - and will throw the type of errors you are seeing.
So how does this shared storage layer look like? Fibre channels (HBAs) connected to a Fibre Channel Switch and SAN - making SAN LUNs available as shared storage devices?
Typically a shared storage failure would throw errors in the kernel log. This is because the error is not an Oracle error, but a kernel error. As it is in your case. The bottom error on the error stack points to the root cause:
ORA-01157: cannot identify/lock data file 75 - see DBWR trace file
ORA-01110: data file 75: '/dev/vg_rac/rraw_tap3plus_temp_live05'
ORA-27041: unable to open file
HPUX-ia64 Error: 19: No such device
So HP-UX on that node is not seeing a specific shared storage device.

Dataguard configuration from 2-node rac to single instance with out ASM

Hi Gurus,
Oracle Version : 11.2.0.1
Operating system:linux.
Here i am trying to configure data Guard from 2-node rac to a singled instance stanby database . I have done all the changes in the parameter file for both primary and stand by database and when i am trying to duplicate my target database it is giving error as shown below.
[oracle@rac1 dbs]$ rman target / auxiliary sys/qfundracdba@poorna
Recovery Manager: Release 11.2.0.1.0 - Production on Thu Jul 21 14:49:01 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: QFUNDRAC (DBID=3138886598)
connected to auxiliary database: QFUNDRAC (not mounted)
RMAN> duplicate target database for standby from active database;
Starting Duplicate Db at 21-JUL-11
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=63 device type=DISK
contents of Memory Script:
   backup as copy reuse
   targetfile '/u01/app/oracle/product/11.2.0/db_1/dbs/orapwqfundrac1' auxiliary format
'/u01/app/oracle/product/11.2.0/db_1//dbs/orapwpoorna'   ;
executing Memory Script
Starting backup at 21-JUL-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=10 instance=qfundrac1 device type=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 07/21/2011 14:49:29
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 07/21/2011 14:49:29
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-01017: invalid username/password; logon denied
ORA-17629: Cannot connect to the remote database serverHere i was able to connect to my auxiliary database as shown below
[oracle@rac1 dbs]$ rman target /
Recovery Manager: Release 11.2.0.1.0 - Production on Thu Jul 21 15:00:10 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: QFUNDRAC (DBID=3138886598)
RMAN> connect auxiliary sys/qfundracdba@poorna
connected to auxiliary database: QFUNDRAC (not mounted)Can any one please help me .
Thanks & Regards
Poorna Prasad.S

Hi All,
Can any one please find out my both the parameters file and tell me if any thing is wrong.
Primary Database parameters.
qfundrac1.__db_cache_size=2818572288
qfundrac2.__db_cache_size=3372220416
qfundrac1.__java_pool_size=16777216
qfundrac2.__java_pool_size=16777216
qfundrac1.__large_pool_size=16777216
qfundrac2.__large_pool_size=16777216
qfundrac1.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
qfundrac2.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
qfundrac1.__pga_aggregate_target=4294967296
qfundrac2.__pga_aggregate_target=4294967296
qfundrac1.__sga_target=4294967296
qfundrac2.__sga_target=4294967296
qfundrac1.__shared_io_pool_size=0
qfundrac2.__shared_io_pool_size=0
qfundrac1.__shared_pool_size=1375731712
qfundrac2.__shared_pool_size=855638016
qfundrac1.__streams_pool_size=33554432
qfundrac2.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/qfundrac/adump'
*.audit_trail='db'
*.cluster_database=true
*.compatible='11.2.0.0.0'
*.control_files='+ASM_DATA2/qfundrac/controlfile/current.256.754410759'
*.db_block_size=8192
*.db_create_file_dest='+ASM_DATA1'
*.db_create_online_log_dest_1='+ASM_DATA2'
*.db_domain=''
*.DB_FILE_NAME_CONVERT='/u02/poorna/oradata/','+ASM_DATA1/','/u02/poorna/oradata','+ASM_DATA2/'
*.db_name='qfundrac'
*.db_recovery_file_dest_size=40770732032
*.DB_UNIQUE_NAME='qfundrac'
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=qfundracXDB)'
*.fal_client='QFUNDRAC'
*.FAL_SERVER='poorna'
qfundrac2.instance_number=2
qfundrac1.instance_number=1
*.LOG_ARCHIVE_CONFIG='DG_CONFIG=(qfundrac,poorna)'
*.LOG_ARCHIVE_DEST_1='LOCATION=+ASM_FRA VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=qfundrac'
*.LOG_ARCHIVE_DEST_2='SERVICE=boston ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=poorna'
*.LOG_ARCHIVE_DEST_STATE_1='ENABLE'
*.LOG_ARCHIVE_DEST_STATE_2='ENABLE'
*.LOG_ARCHIVE_FORMAT='%t_%s_%r.arc'
*.LOG_ARCHIVE_MAX_PROCESSES=30
*.LOG_FILE_NAME_CONVERT='/u02/poorna/oradata/','+ASM_DATA1/','/u02/poorna/oradata','+ASM_DATA2/'
*.open_cursors=300
*.pga_aggregate_target=4294967296
*.processes=300
*.remote_listener='racdb-scan.qfund.net:1521'
*.REMOTE_LOGIN_PASSWORDFILE='EXCLUSIVE'
*.sec_case_sensitive_logon=FALSE
*.sessions=335
*.sga_target=4294967296
*.STANDBY_FILE_MANAGEMENT='AUTO'
qfundrac2.thread=2
qfundrac1.thread=1
qfundrac1.undo_tablespace='UNDOTBS1'
qfundrac2.undo_tablespace='UNDOTBS2'and my standby database prameter file.
poorna.__db_cache_size=314572800
poorna.__java_pool_size=4194304
poorna.__large_pool_size=4194304
poorna.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
poorna.__pga_aggregate_target=343932928
poorna.__sga_target=507510784
poorna.__shared_io_pool_size=0
poorna.__shared_pool_size=176160768
poorna.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/poorna/adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='/u01/app/oracle/oradata/poorna/control01.ctl','/u01/app/oracle/flash_recovery_area/poorna/control02.ctl'
*.db_block_size=8192
*.db_domain=''
#*.db_name='poorna'
#*.db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
*.db_recovery_file_dest_size=4039114752
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=poornaXDB)'
*.local_listener='LISTENER_POORNA'
*.memory_target=849346560
*.open_cursors=300
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sec_case_sensitive_logon=FALSE
*.undo_tablespace='UNDOTBS1'
############### STAND By PARAMETERS ########
DB_NAME=qfundrac
DB_UNIQUE_NAME=poorna
LOG_ARCHIVE_CONFIG='DG_CONFIG=(poorna,qfundrac)'
#CONTROL_FILES='/arch1/boston/control1.ctl', '/arch2/boston/control2.ctl'
DB_FILE_NAME_CONVERT='+ASM_DATA1/','/u02/poorna/oradata/','+ASM_DATA2/','/u02/poorna/oradata'
LOG_FILE_NAME_CONVERT= '+ASM_DATA1/','/u02/poorna/oradata/','+ASM_DATA2/','/u02/poorna/oradata'
LOG_ARCHIVE_FORMAT=log%t_%s_%r.arc
LOG_ARCHIVE_DEST_1= 'LOCATION=/u02/ARCHIVE/poorna VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=poorna'
LOG_ARCHIVE_DEST_2= 'SERVICE=qfundrac ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=qfundrac'
LOG_ARCHIVE_DEST_STATE_1=ENABLE
LOG_ARCHIVE_DEST_STATE_2=ENABLE
REMOTE_LOGIN_PASSWORDFILE=EXCLUSIVE
STANDBY_FILE_MANAGEMENT=AUTO
FAL_SERVER=qfundrac
FAL_CLIENT=poornaThanks & Regards,
Poorna Prasad.S

Mapping Issue from Address Book

I've been having an issue when looking at map infomation in the address book on an iPhone 4s.
When I go in my contact information to check my home address, which is all correct, whenever I tap on my home address Google Maps opens and the pin is about 10 houses out.
However, if I type the address in manually in Google Maps or simple just click in the address field of Google maps and search again without changing anything, it shows my address exactly.
I've had a few friends also try this and with the same result.
Anyone else have this issue?
I've been having an issue when looking at map infomation in the address book on an iPhone 4s. When I go in my contact information to check my home address, which is all correct, whenever I tap on my home address Google Maps opens and the pin is about 20 metres out. However, if I type the address in manually in Google Maps or simple just click in the address field of Google maps and search again without changing anything, it shows my address exactly. I've had a few friends also try this and with the same result. Anyone else have this issue?I've been having an issue when looking at map infomation in the address book on an iPhone 4s.
When I go in my contact information to check my home address, which is all correct, whenever I tap on my home address Google Maps opens and the pin is about 20 metres out.
However, if I type the address in manually in Google Maps or simple just click in the address field of Google maps and search again without changing anything, it shows my address exactly.
I've had a few friends also try this and with the same result.
Anyone else have this issue?

I am having exactly the same issue on my iPhone 4 with iOS 5. never noticed it till trouble with reminders.

Displaying data from a list into a single field with comma separated values

Hi,
I have a requirement to change a report with an XML structure (simplified version) as below
<Protocol>
<ProtocolNumber>100</ProtocolNumber>
<SiteName>Baxter Building</SiteName>
<ListOfActivity>
<Activity>
<Description>Communication Memo Description.</Description>
<Name>James</Name>
</Activity>
<Activity>
<Description>Visit 4</Description>
<Name>James</Name>
</Activity>
<ListOfActivity/>
</Protocol>
On the report I need to display all the 'Names' for each of the Child (Activities) in a single field at the Parent (Protocol) level, with each Name separated by a comma.
How do I go about getting this to work?
Thanks

Take a look at this: http://blogs.oracle.com/xmlpublisher/entry/inline_grouping
You could do this (ofcourse, you will need to add extra logic to ensure that there is no comma added after the last name..)
<?for-each@inlines:Name?><?.?><?', '?><?end for-each?>
Thanks,
Bipuser

Datagurad setup from 2 Node RAC to single instance (DR site)

Dear Expert,
I have request from management to setup the DR site from current production RAC database using active dataguard. I have two node rac database 11.2.0.3 running on sun solaris machine. I need proper step or good document can refer to setup between production RAC database to DR site single instance standby database. I only experience setup single instance to single instance .Apreciate expert can provide me some link
Regard
liang

Hello;
This will provide a good start and overview :
Creating a Single Instance Physical Standby for a RAC Primary : ( please note parameter changes for Oracle 11 )
http://www.oracle.com/technetwork/database/features/availability/maa-wp-10g-racprimarysingleinstance-131970.pdf
As will this :
http://oracleinstance.blogspot.com/2012/01/create-single-instance-standby-database.html
Oracle 11
Rapid Oracle RAC Standby Deployment: Oracle Database 11g Release 2
http://www.oracle.com/technetwork/database/features/availability/maa-wp-11g-rac-standby-133152.pdf
Best Regards
mseberg

Mapping issue from Invoice (Idoc - file) scenario

Dear All,
I am working on Idoc to File scenario and i have a requirement like..
INVOICE02
   E1EDP01
        E1EDP05
              BETRG
        E1EDP05
              KSCHL
              BETRG    etc
condition :
If KSCHL not equals to space then map all BETRG's to a target field which is not mandatory.            Sometimes E1EDP05 may not contain KSCHL and when i set the context to E1EDP05 level its not considering the BETRG values, it behaving lik taking up the condition part and summing part seperately.
It would be really great if anybody comes up with some ideas.
Thanks a lot
Hari

KSCHL ----> exists
                                             -----------------------> And ------->ifWithoutElse -------------> Target
KSCHL                                                                            Then(BETRG)
                 -------> equalS ---> Not
Constant(blank)
Context of KSCHL should be above that of E1EDP05
I hope that Target node is repeating -
0...unbounded.
Regards,
Abhishek.

Mapping issue replicating sub nodes

Here's what I have
Messages 1:1
Source_MT 1:1
- OrderNum 1:unbounded
- Header 1:1
- - Text 1:unbounded
- - - TextId
- - - TextLine
Target is an RFC structure
Messages 1:1
BAPI_SO 1:unbounded
- SONumber 1:1
- Order_text
- - Item 1:unbounded
- - - TextId
- - - TextLine
In the source_MT, I have more than one text id, lets say 3 of 'em and 2 SOs. If I try to use useOneAsMany, it errors our stating I have too many values in my 1st queue which is textids.
How can I create the same number of text ids in each BAPI_SO split by SO Number? Any idea?
TextID - >
<i>OrderNum</i> ->useOneAsMany->SplitByValue-> Textid
OrderNum - >
Thank you for all your feedback.

Hi,
I think useOneAsMany will not work for your case. Hope you have check this link already
http://help.sap.com/saphelp_nw04/helpdata/en/ef/df564b6aa24fc9ab0d685460747de5/content.htm
You can try it in UDF
When you map the TextID use a UDF function which will take in TextID as a queue form and set the context is from the root level. Inside the UDF loop thru all the records and add it to the resultlist. Give the output of the UDF to a SplitByValue.
Hope this works
Thanks,
Prakash

How to find thead 2 archive log when i recover from 2-node RAC to single

I backup 2-ndoe RAC and restore to single - node
Control file created.
SQL> recover database iuckup controlfile
SQL> recover database using backup controlfIle;
ORA-00279: change 12100176131169 generated at 07/06/2013 16:36:57 needed for
thread 1
ORA-00289: suggestion : /arch/hop1_566085708_1_212692.dat -- Oracle suggest
ORA-00280: change 12100176131169 for thread 1 is in sequence #212692
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
arch/sch1_566085708_1_212692.dat --- I input
ORA-00279: change 12100176131169 generated at needed for thread 2
==> Oracle didn't suggest thread 2 archive log file/
How can I find ?

You have to query V$ARCHIVED_LOG for THREAD# 2 on the source database to find the first archivelog where 12100176131169 is less than the NEXT_CHANGE#
select SEQEUNCE# from V$ARCHIVED_LOG where THREAD#=2 and 12100176131169 between FIRST_CHANGE# and NEXT_CHANGE#
Once you provide the Sequence# and file name for the first Thread 2 file, the RECOVER command will automatically generate the expected file name for the subsequent archivelogs (of both threads).
Hemant K Chitale

Abap mapping - get_value from child node

Hi experts,
I'm doing an abap mapping, but i have some problems extracting data from XML message.
I have:
child = element->get_first_child( ).
while not child is initial.
       wa_reg-registro = child->get_value( ).
       insert ZTABLE from wa_reg.
      child = child->get_next( ).
endwhile
I can see in my table ZTABLE the expected result, but consecutive blanks are all replaced by exactly one space character .
Why?
How can I solve this problem?
Thanks
Carme

Any imput, please

Mapping Issue(if schema node is not present)

I have the following map as follows:
If the node Student_City is not present in the source schema(Student) then the map is not working .
How can I get the right output if a node is not present in the source schema and we want to proceed that schema ?
Prakash

I set the default value as follows in destination schema :
But I am getting the following error:
Invoking component...
C:\Notes\Practicals Document\SSDissamblerPOC\SSDissamblerPOC\ScriptSaveDissamblerProject\SSDissamblerProject\Map1.btm: warning btm1001: The destination node "Employee_Salary" is required but the source node "Student_City" is optional.
TestMap used the following file: <file:///C:\Notes\Practicals Document\SSDissamblerPOC\Locations\Instance.xml> as input to the map.
C:\Users\Administrator\AppData\Local\Temp\_MapData\SSDissamblerProject\Map1_output.xml: error btm1046: Output validation error: The element 'Employee' has invalid child element 'Employee_Exp'. List of possible elements expected: 'Employee_Salary'.
Test Map failure for map file <file:///C:\Notes\Practicals Document\SSDissamblerPOC\ScriptSaveDissamblerPOC\SSDissamblerProject\SSDissamblerProject\Map1.btm>. The output is stored in the following file: <file:///C:\Users\Administrator\AppData\Local\Temp\_MapData\ScriptSaveDissamblerProject\Map1_output.xml>
Component invocation succeeded.
The output is as follows:
In this Employee_Salary is not present.But I want this.
Note: Student_City node is not present in the source schema.
Prakash

Mapping issue: Based on nodes/Context

Hi Experts...
Can someone help me with the below mapping logic?
if A_NUM = B_NUM; pass NAME
Here is the source structure:
ROOT
            NODE1
                        NODE2
                               A_NUM
            NODE3
                        B_NUM
                        NAME
            NODE4
                        B_NUM
                        NAME
Thanks in advance!

Thanks Ragu and Madhu- It did not work!
Updating with occurrence and correct Node heirarchy
ROOT                                (1-1)
            NODE1                           (0-unb)
                        NODE2               (0-unb)
                                    A_NUM   (0-1)
            NODE3                           (0-unb)
          NODE4                       (1-1)
                             B_NUM       (0-1)
                             NAME         (0-1)
            NODE5                           (0-unb)
          NODE6                      (1-1)
                             B_NUM      (0-1)
                             NAME        (0-1)

External context mapping issue: cannot create nodes,no mapping defined yet

Hello everybody,
I'm trying to use the external context mapping as it is explained in http://help.sap.com/saphelp_nw04/helpdata/en/d7/e551cf896c3a49bb87bb4ce38c99c8/frameset.htm
I did it in the past without any problem, but now, when i try to create a new node, i get the error "cannot create nodes,no mapping defined yet." This error appears as i try to create an element of the node (in the Internal Component), this way:
     IPruebaNodoElement elto = wdContext.nodePruebaNodo().createPruebaNodoElement();
     elto.setPrueba("Esto es una prueba");
     wdContext.nodePruebaNodo().addElement(elto);
The mapping is correctly done in the "Embedder Component", and the attribute "isInputElement"=true in the Interface Controller of the "Internal Component".
Any idea, any clue?
Thank you very much in advance
Isidro López

Frankly speaking: I just read again, but very carefully, all the steps explained at
http://help.sap.com/saphelp_nw04/helpdata/en/d7/e551cf896c3a49bb87bb4ce38c99c8/frameset.htm.
Read it carefully and try to implement that example, that could be really helpful.

Regexp_replace to remove blank lines from multi lines in a single field

Gents. 10g R2.
   with test_tab as
   (select 'x'||chr(10)||'y'||chr(10)||chr(10)||'z' tester from dual)
   select tester from test_tabproduces
x
y
zI require
x
y
zThere's a lot of examples on how to end up with xzy, but I need to maintain the carriage returns, just strip out blank lines.
I've been trying with posix [:cntrl:] but it doesn't seem to want to work. Question: how to get the desired output?
If this has been answered on another post, please point me in the right direction and accept my apologies!

Hi,
The simplest thing might be to use LTRIM. (or TRIM, if you need to remove them from the end of the string, as well).
If you want a regular expression:
SELECT     REGEXP_REPLACE ( tester
                 , '(^|' || CHR (10) || ')' || CHR (10) || '+'
                 , '\1'
FROM     test_tab
;This might be easier to understand if you let x stand for CHR (10):
SELECT     REGEXP_REPLACE ( tester
                 , '(^|x)x+'
                 , '\1'
FROM     test_tab
;This is easier to understand: \1 is either the beginning of the string or x. When this is followed imeediately by 1 or more extra x's, then replace that whole pattern with \1 (that is, remove the extra x's).

Issue while executing the discovery command from target nodes

Hi Experts.
I had to create cluster two node using openfile, after creation of successful lun and associated partition from all the nodes i have changed the ip address of openfiler.
After changing the IP on open filer.
A) openfile version:-
[root@san ~]# uname -r
2.6.26.8-1.0.11.smp.pae.gcc3.4.x86.i686
B) Linux Oel5:-
[root@rac1 ~]# uname -r
2.6.18-194.el5xen
[root@rac1 ~]#
1:- I am able to ping and ssh etc from any node to openfiler.
However, while executing the below command i am facing the below exception..
service iscsi restart
Stopping iSCSI daemon:
iscsid dead but pid file exists [ OK ]
Starting iSCSI daemon: [ OK ]
[ OK ]
Setting up iSCSI targets: iscsiadm: No records found!
[ OK ]
[root@rac1 ~]#
Moreover, tried to discover the targets, unfortunately no message is getting displayed after execution of this below command.
[root@rac1 ~]# iscsiadm -m discovery -t sendtargets -p 192.168.37.200
[root@rac1 ~]#
The quick response will be appreciated as my whole test case is down as of now due storage issues.
Thanks,
Arch.

Are you running a firewall that needs to be adjusted to support your changed Openfiler IP network?

Mapping issue: from unbound node to two single fields

Similar Messages

Maybe you are looking for