Mapping probem after CMS export

I have exported Integration Content into test system. All works OK in Dev. When I executed test scenario (test xi instance) half of mappings works OK. With another I get error:
<i><SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
<SAP:P1>com.sap.engine.services.rfcengine.RFCException: Bean SMPP_CALL_JAVA_RUNTIME3 not</SAP:P1>
</i>
JCO destination works.
The only problem I see in SPROXY -> GoTo -> ConnectionTest.
Could you help me Does this error depends on SPROXY->GoTo->ConnectionTest problem or it is another problem?

HI Denis,
This is connection failure problem.
Did you check SM59->TCP/IP Connections->AI_RUNTIME_JCOSERVER and test the connection.
If anything is broken, i think you can restart the system.
Also make sure that, your mapping is executing successfully in the Repository Tab in the mapping editor.
There may be a some problem.
Similar Issues-it may give some hints
Mapping error
BTW what is the error in SPROXY ?
Regards,
Moorthy

Similar Messages

Strange Data Mapping Errors after SEM 6 Upgrade. Please assist.

Hi All, I encountered these sudden Mapping errors after I tried to do Testing in Post Upgrade Sand Box. Here I am trying to to perform Collected Reported Financial Data under Data Collection Method for a particular Company Code 3040. Kindly help me with some quick responses as this is kind of high priority. The errors and the Diagnosis Notes I am unable to follow as I do not where I shall write those Mapping Rules they are referring to. I do not even know if that need to apply any SAP Notes as such. Once again Highly appreciate your quick response and Many Thanks in Advance.
Regards, BIP
Input conversion for field Period Value LC has invalid format Message no. UCT8210 Diagnosis The mapping rule for target field Period Value LC contains a move with a selected Input Conversion indicator. Therefore, the system performs an input conversion prior to creating the target data. However, an error in the input conversion occurred while moving the source key figure to the target key figure Period Value LC. This means that the format used for the input conversion is incompatible with the target data. System Response The system will not perform the move. Procedure Examine the mapping rule for field Period Value LC. Either select the Conversion Exit indicator or deselect the Input Conversion indicator. Execute the method again. -
3040 is incompatible with input format for field /1FB/COMPANY Message no. UCT8258 Diagnosis During execution, the method derives the source selection for source field /1FB/COMPANY from the mapping rule for the target field. 3040 is one of the values that were derived for the source selection. The system requires that this value is in the correct SAP-internal format because the Conversion Exit indicator has been selected in the move operator for field /1FB/COMPANY. However, the value 3040 is incompatible with the SAP-internal format. System Response The system attempts to interpret value 3040 as an external format and convert it to the internal format. If this fails, the system is unable to restrict the source selection using source field /1FB/COMPANY. In this case, the system may read more source data than was originally intended, which can affect performance. Procedure In the log, choose the Source button to display the source selections that are used to read the source data. When this appears, examine values selected for field /1FB/COMPANY. If the correct values were selected, you can ignore this message. To prevent this message from being issued, you can select the indicator in the mapping rule used by source field /1FB/COMPANY. If incorrect values were selected, make sure that the mapping rule used by source field /1FB/COMPANY has been defined correctly. If the mapping rule is correct and value (3040) derived for the source selection does not affect the overall result, you can ignore this message. If the source selection does not contain the value 3040 for field /1FB/COMPANY and, because of this, source data that is supposed to be read is not being read, make sure that the mapping rule has been defined correctly. If the source selection does not contain any value for field /1FB/COMPANY, make an estimation as to how much excess source data is being read and whether this might affect system performance. If you do not expect any performance problems, you can ignore this message. In any event, you have the following alternatives if the mapping rule is defined correctly, but the source selection on field /1FB/COMPANY is unsatisfactory: You can define a source selection for field /1FB/COMPANY in the Customizing settings for the method on the Selection tab page. Then the method uses this source selection instead of the source selection derived from inverse interpretation of the mapping rule. You can implement the Business Add-In (BAdI) UC_DATATRANSFER and use the method INVERT to determine the source selection on field /1FB/COMPANY. Then the method uses the result of the INVERT method for the source selection instead of the source selection derived from inverse interpretation of the mapping rule. -
Cannot derive the source selection from target field Version Message no. UCT8252 Diagnosis Field Version has one of the following roles: Consolidation unit Group currency key Fiscal year Posting period Version To delimit the volume of the source data to be read, the system usually derives the source selection from the target selection of such a field. However, the system cannot derive a source selection from field Version. System Response It is possible that a greater volume of source data is being read than is necessary. This can lead to performance issues. Procedure Check whether a mapping rule is defined for field Version. If a mapping rule is defined, you can disregard this warning message. However, if you discover after method execution that the system did not process a large amount of data, and that system performance was not satisfactory, you may want to examine the source selection by choosing the Source button in the log. If the reason for the disregarded data is that too much source data was read because of the unrestricted selection on the source field (which is linked with target field Versionthrough mapping), choose one of the alternatives below: Change the mapping rule for field Version so that the system can derive a delimiting source selection. Implement the Business Add-In (BAdI) UC_DATATRANSFER with the method INVERT to delimit the selection for the source field that is linked via mapping to the target field Version. -
Cannot derive the source selection from target field Group Currency Message no. UCT8252 Diagnosis Field Group Currency has one of the following roles: Consolidation unit Group currency key Fiscal year Posting period Version To delimit the volume of the source data to be read, the system usually derives the source selection from the target selection of such a field. However, the system cannot derive a source selection from field Group Currency. System Response It is possible that a greater volume of source data is being read than is necessary. This can lead to performance issues. Procedure Check whether a mapping rule is defined for field Group Currency. If a mapping rule is defined, you can disregard this warning message. However, if you discover after method execution that the system did not process a large amount of data, and that system performance was not satisfactory, you may want to examine the source selection by choosing the Source button in the log. If the reason for the disregarded data is that too much source data was read because of the unrestricted selection on the source field (which is linked with target field Group Currency through mapping), choose one of the alternatives below: Change the mapping rule for field Group Currency so that the system can derive a delimiting source selection. Implement the Business Add-In (BAdI) UC_DATATRANSFER with the method INVERT to delimit the selection for the source field that is linked via mapping to the target field Group Currency
1 is incompatible with input format for field FISCPERIOD Message no. UCT8258 Diagnosis During execution, the method derives the source selection for source field FISCPERIOD from the mapping rule for the target field. 1 is one of the values that were derived for the source selection. The system requires that this value is in the correct SAP-internal format because the Conversion Exit indicator has been selected in the move operator for field FISCPERIOD. However, the value 1 is incompatible with the SAP-internal format. System Response The system attempts to interpret value 1 as an external format and convert it to the internal format. If this fails, the system is unable to restrict the source selection using source field FISCPERIOD. In this case, the system may read more source data than was originally intended, which can affect performance. Procedure In the log, choose the Source button to display the source selections that are used to read the source data. When this appears, examine values selected for field FISCPERIOD. If the correct values were selected, you can ignore this message. To prevent this message from being issued, you can select the indicator in the mapping rule used by source field FISCPERIOD. If incorrect values were selected, make sure that the mapping rule used by source field FISCPERIOD has been defined correctly. If the mapping rule is correct and value (1) derived for the source selection does not affect the overall result, you can ignore this message. If the source selection does not contain the value 1 for field FISCPERIOD and, because of this, source data that is supposed to be read is not being read, make sure that the mapping rule has been defined correctly. If the source selection does not contain any value for field FISCPERIOD, make an estimation as to how much excess source data is being read and whether this might affect system performance. If you do not expect any performance problems, you can ignore this message. In any event, you have the following alternatives if the mapping rule is defined correctly, but the source selection on field FISCPERIOD is unsatisfactory: You can define a source selection for field FISCPERIOD in the Customizing settings for the method on the Selection tab page. Then the method uses this source selection instead of the source selection derived from inverse interpretation of the mapping rule. You can implement the Business Add-In (BAdI) UC_DATATRANSFER and use the method INVERT to determine the source selection on field FISCPERIOD. Then the method uses the result of the INVERT method for the source selection instead of the source selection derived from inverse interpretation of the mapping rule
Input must be in the format ___,___,__~ Message no. 00088 Diagnosis Your entry does not match the specified input format. System Response The entry in this field was rejected. Procedure The entry must comply with the edit format. The following edit format characters have a special meaning: "_" (underscore) There should be an input character at this point; this should be a number for numeric fields. "." (decimal point) (applies to numeric fields) The decimal point occurs here (setting in the user master record). "," (thousands separator) (applies to numeric fields) This separator occurs (optionally) for more than three figures. Depending on the setting in the user master record, it can be a period or a comma. "V" (applies to numeric fields) The operational sign appears here. If used, it must by at the right margin of the field. The sign is either "-" or " "(space). "~" (tilde) (applies to numeric fields) As of and including this character, leading zeros must also be entered. Otherwise, this character has the same meaning as an underscore. Leading zeros need not be entered on the left of the tilde. They are not output at this position. All other characters have their normal meanings and must be entered in the same position as in the edit format.

Hi Dan,
Could you Kiindly advise me where we need to write the Mapping Rules in Consolidation Monitor? All he time the errors refering to Mapping Rules. The only Tab I seen "Mapping" is in Data Basis But as per my Understanding Iwe do not have much to do there as it is system generated Mapping Tab.
Where we actually go and select/deselct those Input Conversion Indicator/ Conversion exit Indicator.
Highly appreciate your advise.
Thanks and Regards,
BIP

&DISPLAY_USER not working properly after import/export of application

I'm getting some weird functionality.
Several variables are no longer working after I exported and imported a page into the same HTMLDB environment
for example at the bottom of the page I now get:
User: &DISPLAY_USER Language: &BROWSER_LANGUAGE
I verified that the template are the same in both cases.
I also get the same error in one of my links
with
&SESSION not resolving.
Any suggestions are welcome.
Thanks,
Erik

Erik,
Items using that syntax need a period at the end (&DISPLAY_USER.) when the application uses "exact substitutions mode". Some of our older applications used "non-exact substitutions mode". Perhaps you exported the page from such an application.
Scott

Table Problems after Word Export from RH8

I am running RoboHelp HTML 8 as part of Technical Communications Suite 2 on Windows XP Professional and exporting to Word 2007. This is a recent upgrade. Previously, I was just running RoboHelp 8 without TCS. All of the Adobe software is completely patched and up-to-date.
The help system I am converting to Word is large and results in over 600 pages of Word content with a lot of tables (generally just for data presentation and not layout purposes). I'm also using build tags and single-sourcing this document to another, shorter document that is over 400 pages long.
I have exported various documents from RoboHelp to Word many, many times before, and although I don't like the amount of reformatting I have to do, I'm used to the effort involved. However, the behavior seems to have changed recently.
These days (possibly after the conversion to TCS?), after I export the help system to Word, all tables are set to have the text wrap around them (Table Properties | Table | Text wrapping | Around). Before, this setting always defaulted to no wrapping. I wouldn't mind this, because I could simply set the tables to have no wrapping, but even after I do so, the full functionality of tables is still not available to me. For example, I can't set to header row to repeat across pages (Layout ribbon | Repeat Header Rows). I also can't set rows to not break across pages (Table Properties | Row | Allow to break across pages). In fact, I can't select a single row of the table generally without selecting the entire table. My coworker found out that you can copy each table into Word Pad and then copy it back into Word as a workaround, but that is extremely tedious. We already waste a lot of time reformatting these documents for various other reasons.
As a (probably irrelevant) footnote, I convert to .doc rather than .docx, because RoboHelp crashes when I export to .doc. I then save the .doc as a .docx file to conserve file size. The same problem exists in both file formats.
Thanks in advance for any help you can provide!

Hi, Peter. Thank you for your thoughtful response.
Yes, after exporting to Word, I couldn't set the tables' heading rows to repeat and couldn't select individual rows. Also, if I selected the entire table, normally Word would offer me the option to convert the table to text. However, Word seems to think that the table isn't a table, so instead it offers me the option to convert the text to a table. Good times. :-)
I write the above in the past tense, however, because I discovered a solution. I found a table in the Word output that didn't have the problem, possibly the only one of its kind in the project. In RoboHelp, I compared the HTML source of that table to a table that did have the problem. I discovered that the problematic table had two HTML tags that the unproblematic table did not: <?rh-align_start align="left" ?> and <?rh-align_end ?>. I deleted the tags and presto! The problem was fixed for this table in the Word output. This worked for a couple of other bad tables as well, so I decided to do a global find and replace. Using Find and replace in files in RoboHelp, I replaced each of these tags with nothing (i.e., a null value, essentially deleting them). Searching for the entire string didn't detect all instances, so I searched again for "rh-align" only and found about 50 instances, which I manually corrected in the HTML source.
So far, so good!
I didn't try the options you suggested, but I was suspecting a template problem as well. Thank God it wasn't because I wasn't relishing the prospect of tracking that down.
And yes! We tried your macros. Actually, the world-class tech writer Sue McKinney, who works with me, tried it, and she says it took three minutes to reformat the rows in the tables so they wouldn't break, which is a requirement of ours. We look forward to implementing the other table-related macro functionality you developed. Thanks for providing it for our use!

After I exported a PDF to a Word doc and downloaded it, I can't get the pointer tool to work.

After I exported a PDF to a Word doc and downloaded it, I can't get the pointer tool to work. When I click on the document text, the only tool is the "move" tool. I can't edit or select text. Please advise.

Version of Adobe: Adobe ExportPDF (not Pro)
Operating system: Windows 8.1
Steps I am taking: When the PDF file is selected and opened, I clicked on Tools menu on right side of the screen; then I clicked on Select PDF file; then under Convert To, I selected Microsoft Word (*.docx); then I hit the box below that; and clicked Convert. I then see the message that says it is Converting to Export PDF Online. Then I see a link below that, that says Download Converted File. This takes me online to Adobe Acrobat .com, where, I see the command, Export PDF, and see a blue box on the same screen that says Select PDF Files to Export. I click on the thumbnail of the file I want to export. This brings up, online, a screen containing the file I wanted to convert to Word. Then, on the same screen, I click on the icon on the right hand of the screen that says Download. then I click on the box on the bottom the screen that contains the Word document I had wanted to convert. This brings up the Word doc. in Compatibility Mode the latest Word version, which I am unfamiliar with and which has a Picture Tools tab that I cannot escape from and I cannot get any selection tool other that the Move pointer, and I cannot find the Select text pointer to select any text on the page. I don't want this Word version and do not know how to return to the old version of Word that I am familiar with.
Can you help me, please?
Theresa Julia Schuer

After i export a pdf file (written in Hebrew) to a Word document, the Word document is written in a Mirror-writing, how can i fix it?

after i export a pdf file (written in Hebrew) to a Word document, the Word document is written in a Mirror-writing, how can i fix it?

Hi,
thank you for your help.
I am using an Adobe Acrobat XI Pro.
It is not a specific file that causes trouble, it is happening with all the documents with Hebrew fonts.
I tried the "Save as" option and the same problem happened.

My Imovie looks great on mac but it is discolored and grainy after I export to dvd.

My Imovie looks great on mac but it is discolored and grainy after I export to dvd. I need help, it looks awful when projected even playing from my mac.

It's my understanding based on what another long time contributor stated that Share to iDVD converts direct to a MPEG-2 format and drops it directly into the iDVD Project for you. Share to Media Browser saves it to .MP4 (actually .m4v which is what apple uses for iTunes video,etc) then that gets converted by iDVD into MPEG-2. So something about the export direct to MPEG-2 when you choose Share to iDVD is introducing the problem. That's why Share to Media Browser seems to get around that limitation, it uses a different encoding path altogether.

After Effects exports picture as a black frame?

I just graded a simple picture in AE and after I exported the picture I went to look at the image file and all It was was a black frame. I'ved tried different formats, and I've tried exporting it as a .psd for photoshop but it still won't work. Can somebody help me with this?

You have not provided proper information on your file and settings nor your system. Based on your tags we can assume that you are using MB Colorista and then you may simply exhaust its limits or there is a general issue with your graphics hardwre, since the effect uses GPU acceleration.
Mylenium

Colours trouble with a psd file after import/export through Lightroom 4

I'm working with CS5, and I just bought LR4. I took a psd file (in Adobe 98 space) and I imported it in LR 4, and the exported as psd file in Adobe 98 colour space. Both files, the original one and the other after import/export, are quite different. The saturation of the res is not the same... When I repeat this experinece with a psd file in sRGB or in Prophoto, I have no difference betwwen both files.
I then conclude that LR doesn't recognize the adobe 98 pprofile of my psd file.
Is that normal, have you tried this experience, is there a bug in LR or a bug in the way, I proceed?
Best regards

When you import there is an Advanced button in one of the dialogs. Click that and you will be able to Paginate against chosen styles. That will break your document into topics.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Excel export gives csv file occasionally after multiple exports

Hi experts!!
I have the following problem.
After several exports to excel from the web UI the file format turns to csv, even though the user runs MS office 2007.
I found 2 notes describing the issue but these are for other releases and cannot be implemented.
(I am working on CRM 2007)
Any ideas????
Thank you in advance!!!

Hi,
for investigating this problem a short introduction to the Excel-Export function is helpful.
On serverside JavaScript tailored for interaction with the current Table is generated. This code is invoked on the client machine and tries interfacing with Excel via ActiveX-Controls. In a third step the data is requested from the Application Server, this request is processed in the handler class CL_CHTMLB_CONFIG_TAB_EXCEL_EXP.
I guess that the problem is caused by the JavaScript code executed on the client machen. There is a fallback, if no ActiveX-Control could be initialized a csv-File is requested from the server.
I would try some JavaScript debugging, the function thtmlbExcelExport in library scripts.js would be a good entry point.
Regards, Arne

Settings Get Zeroed out after File Export

I just noticed that out of a group of about 110 JPGs I was editing tonight, about 5 of them had their Develop Settings zeroed out after I exported the files.
Examples:
1. One file's Fill Light went from 14 to 0 after File Export.
2. Another file's Fill Light went from 17 to 0 after File Export.
3. Still another file's Black went from 3 to 0; its Brightness went from +5 to 0; it's Contrast went from -1 to 0....all 3 things on the same file zeroed out.
4. Still another file's Black went from 1 to 0, and its Contrast went from -3 to 0.
5. Another file was rotated by .28. After exporting, the rotation in the history went from .28 to 0.
One other problem I saw with at least 2 of these files (different than the 5 above), I had created virtual pictures for these 2 and exported them as TIFFs to Photoshop CS3. After the TIFF file was updated with CS3, it automatically was reimported to LR. There is no "Import" listed in the history, nor is there any "Created Virtual Copy" in the history.
I don't think I'm doing anything wrong; again, there have only been 5 out of about 110 JPGs for which as happened.

I think I have that box checked, but I'm not sure where to find it. I seem to recall having checked something like this before, but, again, I just can't
seem to find where it is. I've checked in Preferences and do not see it, as well as other places.
Anyway, I do not export files to CS3 very often, but I know that every time I do, the edited file gets added back into the LR Catalog when I close out the file in Photoshop CS3. I typically export these files to CS3 keeping the LR adjustments.
I originally had this set of images sorted by File Name. I did that because within this set are pictures taken from 2 different cameras, with two completely different types of file names. I wanted only to work on the images from one camera at a time. While sorted by File Name, the edited file does get added to the Catalog, stacked upon the original file....so, yes, they are side by side.
I did try sorting by Capture Time, but that didn't make any difference.
Because my other problem of settings being zeroed out appeared to be "fixed," I was hoping this problem also would be fixed. But when I tried the same procedure as last night (only with the files sorted by Capture Time instead of by File Name), the same thing happens...there is no "Import" listed in the History panel.
What has been "fixed," however, is that for those few files that I made a Virtual Copy of, the History panel now shows "Create Virtual Copy." I did not do anything to these files. Perhaps the reboot of my computer fixed this. I really don't know.
As mentioned, I do not export files very often to CS3, so this problem may have always existed (not showing "Import").
Thanks for your reply....I'll watch for more in the future, but because the problem happened again this morning, I think it is perhaps a software bug.

Problem with Materialized Views after an export

Hi @ everybody,
At an Oracle 11g R2 (11.2.0.3.0) instance, all actual CPU's/SPU's are installed, on a Red Hat 6 Machine i have a problem with Materialized Views from a schema, which i have exportet from an old database machine on Oracle 10g (10.2.0.1.0) to the new machine.
I've exportet with the old exp and imported with imp, because i know, that i get some strange errors because of the materialized views when i'm using the new expdp and impdp tools.
At the old machine the materialized views are so programmed, that they get an update of data at a defined time like this:
START WITH TRUNC(SYSDATE) + 21/24
      NEXT SYSDATE+1
...But after the export this "update function" of the materialized view is not available. So i have deleted that views and recreated them with the START WITH parameters. So now they are running.
But why do i have this problem?
Is this "START WITH" somewhere written as a job or so in, for example, DBMS_SCHEDULER or something else? So i had forgotten to export these jobs or where is that defined?
Is this a bug?
Thanks for answers and help!
Best regards,
David

I can't remember the error of expdp/impdp. That is some days ago, i have to rebuild this.
I think in my scenario for the import i don't need the TABLE_EXISTS_ACTION, because by importing at the new server i've just createt the naked tablespace for the data and the users, not more. So he didn't has something to overwrite.
And i have to tell you: i'm just the dbA. The desining of the tables and materialized views is many years ago by installing the old server. I'm just to young in my company to know about the design of the instance and why it was designed so.
Anyway: my problem is, that after the import of the schemas to a new server the "START WITH" option in the materialized views is not there anymore and i just want to why so i can think about a solution for that and create it with the database designers of my company.
EDIT: And here are the SQL Statements for creating the Materialized Views:
First, at the OLD Server (Oracle 10g 10.2.0.1.0)
CREATE MATERIALIZED VIEW "DUPONT_CCG2_P"."PR_PRODUCT_ITEMS"
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "DUPONT_14523"
BUILD IMMEDIATE
USING INDEX
REFRESH COMPLETE ON DEMAND START WITH sysdate+0 NEXT SYSDATE+1
USING DEFAULT LOCAL ROLLBACK SEGMENT
DISABLE QUERY REWRITE
AS (SELECT DISTINCT
      PR_CUSTOMER_MASTER_DATA.CLIENT_ID,
      PR_CUSTOMER_MASTER_DATA.ILN_USER,
      PR_ARTICLE.EAN,
      PR_ARTICLE.CODE,
      PR_USED_ARTICLE_TEXT.ARTICLE_TEXT,
      PR_USED_ARTICLE_TEXT.LANG_CODE,
      PR_ARTICLE.SUP_ITEM_NO,
      PR_ARTICLE.OLD_ITEM_NO,
      PR_COMPANY_ITEM_MATCH.ITEM_BY_NO,
      PR_COMPANY_ITEM_MATCH.UOM_UNIT,
      PR_COMPANY_ITEM_MATCH.PRICE_UOM,
      PR_COMPANY_ITEM_MATCH.PRICE,
      PR_COMPANY_ITEM_MATCH.CURRENCY,
      PR_COMPANY_ITEM_MATCH.PRICE_QTY,
      PR_COMPANY_ITEM_MATCH.SALES_UNIT,
      PR_COMPANY_ITEM_MATCH.START_DATE,
      PR_COMPANY_ITEM_MATCH.END_DATE,
      PR_ARTICLE.UPDATED_AT
        FROM PR_ARTICLE, PR_COMPANY_ITEM_MATCH, PR_USED_ARTICLE_TEXT, PR_CUSTOMER_MASTER_DATA, PR_ADDRESS
        WHERE PR_ADDRESS.ORDER_TYPE='REP'
      AND PR_CUSTOMER_MASTER_DATA.ILN_USER=PR_ADDRESS.ILN_USER
      AND PR_COMPANY_ITEM_MATCH.ILN_USER=PR_ADDRESS.ILN_LINK
      AND PR_CUSTOMER_MASTER_DATA.SALES_ORG=PR_COMPANY_ITEM_MATCH.SALES_ORG
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_COMPANY_ITEM_MATCH.CLIENT_ID
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_ADDRESS.CLIENT_ID
      AND PR_ARTICLE.SUP_ITEM_NO=PR_COMPANY_ITEM_MATCH.SUP_ITEM_NO
      AND PR_COMPANY_ITEM_MATCH.SALES_ORG=PR_USED_ARTICLE_TEXT.SALES_ORG
      AND PR_ARTICLE.SUP_ITEM_NO=PR_USED_ARTICLE_TEXT.SUP_ITEM_NO
      AND PR_CUSTOMER_MASTER_DATA.LANG_CODE=PR_USED_ARTICLE_TEXT.LANG_CODE
      AND ( PR_COMPANY_ITEM_MATCH.END_DATE IS NULL OR to_date(PR_COMPANY_ITEM_MATCH.END_DATE,'YYYYMMDD') - sysdate > 0)
      AND ( PR_COMPANY_ITEM_MATCH.START_DATE IS NULL OR sysdate - to_date(PR_COMPANY_ITEM_MATCH.START_DATE,'YYYYMMDD') > 0)
)And here the at the NEW Server (Oracle 11g R2 11.2.0.3.0)
CREATE MATERIALIZED VIEW "DUPONT_CCG2_P"."PR_PRODUCT_ITEMS" ("CLIENT_ID", "ILN_USER", "EAN", "CODE", "ARTICLE_TEXT", "LANG_CODE", "LANR", "OLD_LANR", "ITEM_BY_NO", "UOM_UNIT", "PRICE_UOM", "PRICE", "CURRENCY", "PRICE_QTY", "SALES_UNIT", "START_DATE", "END_DATE", "UPDATED_AT")
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255
NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1
BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)
TABLESPACE "DUPONT_14523"
BUILD IMMEDIATE
USING INDEX
REFRESH COMPLETE ON DEMAND START WITH sysdate+0 NEXT SYSDATE+1
USING DEFAULT LOCAL ROLLBACK SEGMENT
USING ENFORCED CONSTRAINTS DISABLE QUERY REWRITE
AS (SELECT DISTINCT
      PR_CUSTOMER_MASTER_DATA.CLIENT_ID,
      PR_CUSTOMER_MASTER_DATA.ILN_USER,
      PR_ARTICLE.EAN,
      PR_ARTICLE.CODE,
      PR_USED_ARTICLE_TEXT.ARTICLE_TEXT,
      PR_USED_ARTICLE_TEXT.LANG_CODE,
      PR_ARTICLE.SUP_ITEM_NO,
      PR_ARTICLE.OLD_ITEM_NO,
      PR_COMPANY_ITEM_MATCH.ITEM_BY_NO,
      PR_COMPANY_ITEM_MATCH.UOM_UNIT,
      PR_COMPANY_ITEM_MATCH.PRICE_UOM,
      PR_COMPANY_ITEM_MATCH.PRICE,
      PR_COMPANY_ITEM_MATCH.CURRENCY,
      PR_COMPANY_ITEM_MATCH.PRICE_QTY,
      PR_COMPANY_ITEM_MATCH.SALES_UNIT,
      PR_COMPANY_ITEM_MATCH.START_DATE,
      PR_COMPANY_ITEM_MATCH.END_DATE,
      PR_ARTICLE.UPDATED_AT
        FROM PR_ARTICLE, PR_COMPANY_ITEM_MATCH, PR_USED_ARTICLE_TEXT, PR_CUSTOMER_MASTER_DATA, PR_ADDRESS
        WHERE PR_ADDRESS.ORDER_TYPE='REP'
      AND PR_CUSTOMER_MASTER_DATA.ILN_USER=PR_ADDRESS.ILN_USER
      AND PR_COMPANY_ITEM_MATCH.ILN_USER=PR_ADDRESS.ILN_LINK
      AND PR_CUSTOMER_MASTER_DATA.SALES_ORG=PR_COMPANY_ITEM_MATCH.SALES_ORG
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_COMPANY_ITEM_MATCH.CLIENT_ID
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_ADDRESS.CLIENT_ID
      AND PR_ARTICLE.SUP_ITEM_NO=PR_COMPANY_ITEM_MATCH.SUP_ITEM_NO
      AND PR_COMPANY_ITEM_MATCH.SALES_ORG=PR_USED_ARTICLE_TEXT.SALES_ORG
      AND PR_ARTICLE.SUP_ITEM_NO=PR_USED_ARTICLE_TEXT.SUP_ITEM_NO
      AND PR_CUSTOMER_MASTER_DATA.LANG_CODE=PR_USED_ARTICLE_TEXT.LANG_CODE
      AND ( PR_COMPANY_ITEM_MATCH.END_DATE IS NULL OR to_date(PR_COMPANY_ITEM_MATCH.END_DATE,'YYYYMMDD') - sysdate > 0)
      AND ( PR_COMPANY_ITEM_MATCH.START_DATE IS NULL OR sysdate - to_date(PR_COMPANY_ITEM_MATCH.START_DATE,'YYYYMMDD') > 0)
)The own differences i can see is at the "header". In the new one is the NOCOMPRESS LOGGING Option and in the first line the code has the columns diretcly defined.
But, i think, for my problem this line is determining:
REFRESH COMPLETE ON DEMAND START WITH sysdate+0 NEXT SYSDATE+1And this line is the same at both server.
Edited by: David_Pasternak on 12.04.2013 00:06

After i export a file I am unable to open the saved file

after I export a file I am unable to open the saved file

Please see the solution I suggested here: http://forums.adobe.com/message/4315372#4315372
Let us know if you have any questions!
-David

Lightroom 5.6 - photos in one of my collections have all been corrupted - they all become resized after I exported them

I have recently exported two photo collections. However, one of them seems to have been corrupted. All the photos have been resized after I exported them to lightroom.adobe.com. In fact, whenever I try to open any of the images in Lightroom again they have all been resized (or cropped). Is there anyway of recovering the original edits I made. I can re-adjust the images one by one but there are over 1000!
Thanks
Mike

Hi dj-paige
Thanks for replying.
I guess "corrupted" isn't the correct term to use. The problem is that I have been editing photos in Lightroom (well over a 1,000) and then put them in two collections, one called Birds (300+ images) and the other Dragonflies (1000+ images). I then uploaded these collections to Adobe-Lightroom so that I can view them online. However, when I view the Dragonfly collection, either online or in Lightroom, they have all changed, having all been cropped beyond recognition. What I want to know is, 1) has anyone experienced this problem before and 2) is there a way of recovering the photos with all the edits that I have painstakingly made over the past few weeks. I can go through the photos one by one and change the crop so that they appear fine but there are over a 1,000 images and it would take several weeks to go through them again.
Cheers
Mike

Why don't oam files placed in indd cc show up in ibooks after being exported as an epub?

Why don't oam files placed in indd cc show up in ibooks after being exported as an epub? I work on a PC not a mac and have done everything described in tutorials. OAM animations are not working. please help.
Thank you.
Kathy

This discussion explains the whole issue. Nothing has changed since it was written:
How to add Edge Animate Web Publish to FL EPUB 3 for iBooks.

Mapping probem after CMS export

Similar Messages

Maybe you are looking for