Mapping Problem Context Change
Hi all
I use Sap ABABusinessPartner to replicate Data.
Here I have to map only TelephoneNumber where StandardSenderIndicator = X
partner
partner
Telephone
StandardSenderIndicator
TelephoneNumber
Telephone
TelephoneNumber
partner
if context is set to partner Queue of StandardSenderIndicator is <null>;X;<null>
Queue of TelephoneNumber is <null>;Number1 Number2;<null>
; means ContextChange
any Ideas??
<?xml version="1.0"; encoding="UTF-8"?>
<ABABusinessPartner >
<Partner>
<PartnerRecord>
<PartnerInformation>
</PartnerInformation>
</PartnerRecord>
</Partner>
<Partner>
<PartnerRecord>
<PartnerInformation>
<AddressInformation>
<Address>
<AddressData>
<CommunicationInformation>
<TelephoneInformation>
<CompleteDataIndicator>X</CompleteDataIndicator>
<Telephone>
<Contact>
<ContactData>
<StandardSenderIndicator>X</StandardSenderIndicator>
<TelephoneNumber>123456</TelephoneNumber>
</ContactData>
</Contact>
</Telephone>
<Telephone>
<Contact>
<ContactData>
<TelephoneNumber>5556666</TelephoneNumber>
</ContactData>
</Contact>
</Telephone>
</TelephoneInformation>
</CommunicationInformation>
</AddressData>
</Address>
</AddressInformation>
</PartnerInformation>
</PartnerRecord>
</Partner>
<Partner>
<PartnerRecord>
<PartnerInformation>
<AddressInformation>
<Address>
<AddressData>
<CommunicationInformation>
<TelephoneInformation>
<CompleteDataIndicator>X</CompleteDataIndicator>
<Telephone>
<Contact>
<ContactData>
<StandardSenderIndicator>X</StandardSenderIndicator>
<TelephoneNumber>333333</TelephoneNumber>
</ContactData>
</Contact>
</Telephone>
</TelephoneInformation>
</CommunicationInformation>
</AddressData>
</Address>
</AddressInformation>
</PartnerInformation>
</PartnerRecord>
</Partner>
</ABABusinessPartner>
Hi,
Telephone
StandardSenderIndicator
TelephoneNumber
Telephone
TelephoneNumber
First check if there is a StandardSenderIndicator tag in the source field (exists) and check if it has value X .....now if both conditions are satisfied map the required source element to target.....hopefully your issue will be solved......
Regards,
Abhishek.
Similar Messages
-
Hi,
what is context change?? where it is implemented?
thanks in advance.Hi!
Context changes take place in Message Mapping when the source structure is processed. for more details about mapping and context change see sap online help - e.g. here http://help.sap.com/saphelp_nwpi71/helpdata/en/49/1ebc6111ea2f45a9946c702b685299/content.htm
Regards,
Volker
Additionally:
More detailed information about contexts and context changes see here: http://help.sap.com/saphelp_nwpi71/helpdata/en/3d/24e15bf9d79243b45d49b13b03de8f/content.htm
Edited by: Volker Kolberg on May 25, 2009 10:10 AM -
Context change by DOM parsing Java Mapping in XI
Hi Team,
I would like to know that how can I handle Context Change by DOM Parser Java Mapping in XI.?
Suppose the source XML structure I have like below:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Header xmlns:ns0="urn:bp:xi:hr:edm:test:100">
<FileName>
<filesub>
<subname>a</subname>
<subname>b</subname>
<subname>c</subname>
</filesub>
</FileName>
<FileName>
<filesub>
<subname>d</subname>
<subname>e</subname>
<subname>f</subname>
</filesub>
</FileName>
</ns0:Header>
Where the field FileName can occur maximum thrice(0...3) but the subname field is (0....unbounded) but in the target source I would like to have as given below:
<?xml version="1.0" encoding="UTF-8" ?>
- <MT_Test4 xmlns="urn:bp:xi:hr:edm:test:100">
- <Header>
<FileName>a</FileName>
<FileName1>d</FileName1>
</Header>
- <Header>
<FileName>b</FileName>
<FileName1>e</FileName1>
</Header>
Header>
<FileName>c</FileName>
<FileName1>f</FileName1>
</Header>
</MT_Test4>
That means the first value from every context of the source field is forming my first and second value in my target first context.Thensecond value from every context is forming my 1st and 2nd value of my target 2nd context and finally 3rd value of every context is forming my 1st and 2nd value of my target 3rd context.Is this possible to done through DOM parsing or we have to do it by UDF only?Hi Atanu,
In my last post I gave an alogorithm to solve the mapping problem. Here is the complete program for the mapping.
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.InputStream;
import java.io.OutputStream;
import java.util.Map;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.dom.DOMSource;
import javax.xml.transform.stream.StreamResult;
import org.w3c.dom.Document;
import org.w3c.dom.Element;
import org.w3c.dom.Node;
import org.w3c.dom.NodeList;
import com.sap.aii.mapping.api.StreamTransformation;
import com.sap.aii.mapping.api.StreamTransformationException;
public class DOMParser1 implements StreamTransformation{
public void execute(InputStream in, OutputStream out)
throws StreamTransformationException {
try
DocumentBuilderFactory factory=DocumentBuilderFactory.newInstance();
DocumentBuilder builderel=factory.newDocumentBuilder();
/input document in form of XML/
Document docIn=builderel.parse(in);
/document after parsing/
Document docOut=builderel.newDocument();
TransformerFactory tf=TransformerFactory.newInstance();
Transformer transform=tf.newTransformer();
Element root,child,child1=null;
Node textChild;
NodeList l;
int i,n1,j,div,k;
String s[];
root=docOut.createElement("MT_Test4");
root.setAttribute("xmlns","urn:bp:xi:hr:edm:test:100");
l=docIn.getElementsByTagName("subname");
n1=l.getLength();
s=new String[n1];
for(i=0;i<n1;++i)
s<i>=l.item(i).getFirstChild().getNodeValue();
l=docIn.getElementsByTagName("filesub");
div=l.getLength();
j=n1/div;
for(i=0,k=0;i<j;++i)
child1=docOut.createElement("Header");
root.appendChild(child1);
child=docOut.createElement("FileName");
textChild=docOut.createTextNode(s[k]);
child.appendChild(textChild);
child1.appendChild(child);
child=docOut.createElement("FileName1");
textChild=docOut.createTextNode(s [ k + j ]);
child.appendChild(textChild);
child1.appendChild(child);
++k;
docOut.appendChild(root);
transform.transform(new DOMSource(docOut), new StreamResult(out));
catch(Exception e)
e.printStackTrace();
public void setParameter(Map arg0) {
public static void main(String[] args) {
try{
DOMParser1 genFormat=new DOMParser1();
FileInputStream in=new FileInputStream("C:/Apps/my dw/sdnq/apps.xml");
FileOutputStream out=new FileOutputStream("C:/Apps/my dw/sdnq/tgt1.xml");
genFormat.execute(in,out);
catch(Exception e)
e.printStackTrace();
source -> apps.xml
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Header xmlns:ns0="urn:bp:xi:hr:edm:test:100">
- <FileName>
- <filesub>
<subname>a</subname>
<subname>b</subname>
<subname>c</subname>
</filesub>
</FileName>
- <FileName>
- <filesub>
<subname>d</subname>
<subname>e</subname>
<subname>f</subname>
</filesub>
</FileName>
</ns0:Header>
target structure -> tgt1.xml
<?xml version="1.0" encoding="UTF-8" ?>
- <MT_Test4 xmlns="urn:bp:xi:hr:edm:test:100">
- <Header>
<FileName>a</FileName>
<FileName1>d</FileName1>
</Header>
- <Header>
<FileName>b</FileName>
<FileName1>e</FileName1>
</Header>
- <Header>
<FileName>c</FileName>
<FileName1>f</FileName1>
</Header>
</MT_Test4>
Hope this helps
one more thing in this line "textChild=docOut.createTextNode(s k + j );" somehow the the third braces one opening before k and one closing after j is missing for unknown reasons. Please correct it when you actually run this code.
regards
Anupam
Edited by: anupamsap on Mar 7, 2011 12:47 PM -
Mapping problem in context handling
Hi experts,
I am doing a file to file scenario in which i have to change the queue context is it possible? for simple context change we use ResultList.CC in advance UDF but what to do if we want to add a queue cahnge .To dig more deep into the problem i am explaining my scenario.
my output structure is <GROUP> .....(1 to unbounded)
<Records>....(1 to unbounded)
field1
field2
field13
In one group there can be many records and there will be multiple Groups.Suppose in my udf i want to add a queue change to add some field in other group then how will i achive it ? please guide me with ur inputs
Regards,
SaurabhHi,
context object is a generic term used to make a reference to message heder fileds in the XML file (also vth XPATH). Context of an element is nothing but just the level (with reference to its parent node) where the XML tag appears in the given XML document.
Check this links for more info:
/people/sravya.talanki2/blog/2005/08/16/message-mapping-simplified--part-i
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f59730fa-0901-0010-df97-c12f071f7d3b
http://help.sap.com/saphelp_nw2004s/helpdata/en/d9/718e40496f6f1de10000000a1550b0/content.htm
/people/stefan.grube/blog/2005/12/30/test-user-defined-functions-for-the-xi-graphical-mapping-tool-in-developer-studio
/people/harrison.holland5/blog/2006/12/08/mapping-context-changes-in-xi
http://help.sap.com/saphelp_nw2004s/helpdata/en/4b/a20c4cfea96b498b1e1af3f32f0670/frameset.htm
/people/venkataramanan.parameswaran/blog/2007/02/06/is-there-a-possibility-to-access-xi-standard-functions-in-user-defined-functions-yes
Reward points if this helps
Regards
Pragathi. -
Context Mapping Problem from IDoc to EDI
Hi,
I'm trying to map an IDoc to an EDI and I get this problem.
In my IDoc, I have segment E1ADRM1 (1:N)
My mapping condition is if E1ADRM-PARTNER_Q = OSP then copy E1ADRM-REGION into x (EDI field)
So here is my problem:
In my IDoc test, the segment E1ADRM1 is repeated 6 times and the field REGION is not populated in all iterations so the wrong
REGION is being copied to my EDI field.
If I do a display queue on E1ADRM-PARTNER_Q, the value OSP is at the 5th position
AG
SP
VE
WE
OSP ***
OSO
If I do a display queue on E1ADRM-REGION, since only 5 segment E1ADRM have the field REGION populated, I get
KS
VA
KS
ON
VA
**(E1ADRM-PARTNER_Q = SP do not have the RIGION populated so not showing in the IDoc)
So now, since E1ADRM-PARTNER_Q = OSP is at the 5th position, it is copying the 5th E1ADRM-REGION from the list but it should be the 4th.
How can I do that?
Rgds,
YvesHi,
For the mapping to work as you are expecting the queue should look like this(<b>CC</b> denotes context change)..
KS
<b>CC</b>
<b>CC</b>
VA
<b>CC</b>
KS
<b>CC</b>
ON
<b>CC</b>
VA
If you are not having the context changes, check at what level is field REGION at, right click on REGION in graphical mapping and choose menu item context, the 1st entry should have the tick mark(same should be for the PARTNER_Q field also).
Thanks,
Renjith. -
Team,
I have a problem with context change in a peculiar mapping requirement.
Scenario is IDOC --> XML
There's an idoc field MRKN1 which carries all shipment unit numbers seperated by spaces.
MRKN1 : 50325 50326 50329 50321 50215
This field should be mapped to target XML as below:
<Package> <identifier>50325</identifier>
</Package>
<Package> <identifier>50326</identifier>
</Package>
<Package> <identifier>50329</identifier>
</Package>
<Package> <identifier>50321</identifier>
</Package>
<Package> <identifier>50215</identifier>
</Package>
I created a USD StringTokenizer to extract the values from MRKN1 & to populate it in the identier field:
import java.lang.*;
public void StringTokenizer(String[] input,ResultList result,Container container){
String x[] = new String[input.length];
for(int j=0; j<input.length;j++) {
x = input[j].split(" ");
for(int i=1;i<x.length;i++) {
result.addValue(x<i>);
and mapped liked below:
MRKN1 --> StringTokeniser --> identifier
But the output xml looks like this:
<Package> <identifier>50325</identifier> <identifier>50326</identifier> <identifier>50329</identifier> <identifier>50321</identifier>
<identifier>50215</identifier>
</Package>
Please help me how to create new Package tag for every new identifier tag.
I already tried adding result.addContextChange() just by returning empty value to the above code & mapped it to Package node. But it throws error.
Any immediate help is appreciated.
Thanks in advance,
ShanthiThe above logic works quite different. The complete XML looks like this
Given 3 items & 2 values in MRKN1
<GoodsItem..1>
<Packaging>
<marksNumber>503124</marksNumber>
<PackagesCollection>
<Package>
<identifier>50216</identifier>
</Package>
</PackagesCollection>
<packageType>PK</packageType>
</Packaging>
</GoodsItem..1>
<GoodsItem..2>
<Packaging>
<marksNumber>503124</marksNumber>
<PackagesCollection>
<Package>
<identifier>50215</identifier>
</Package>
</PackagesCollection>
<packageType>PK</packageType>
</Packaging>
</GoodsItem..2>
<GoodsItem..3>
<Packaging>
<marksNumber>503124</marksNumber>
<PackagesCollection/>
<packageType>PK</packageType>
</Packaging>
</GoodsItem..3>
But the customer requirement is quite different -
Message Mapping - Initialize counter every context change
Hi all,
is there any way to develop a counter customer function in a graphical message mapping so every context change of a field the counter initializes?
Imagine i have the following structure:
1 DATA
1.1 DETAIL
1.2 DETAIL
2 DATA
2.1 DETAIL
2.2 DETAIL
and i wanna count DETAIL fields but initialize the counter every DATA field. Is there any way to do it?
Thanks a lot.Hi,
If your Source structure is
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_DATA xmlns:ns0="http://yash.com.YH1309">
<DATA>
<DETAIL/>
<DETAIL/>
</DATA>
<DATA>
<DETAIL/>
<DETAIL/>
<DETAIL/>
</DATA>
</ns0:MT_DATA>
and You want the Target as
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_DATA xmlns:ns0="http://yash.com.YH1309">
<DATA>
<DETAIL>COUNTER=1</DETAIL>
<DETAIL>COUNTER=2</DETAIL>
</DATA>
<DATA>
<DETAIL>COUNTER=1</DETAIL>
<DETAIL>COUNTER=2</DETAIL>
<DETAIL>COUNTER=3</DETAIL>
</DATA>
</ns0:MT_DATA>
Create the below UDF with one argument (DETAIL) and select Execution type all values of a Context
for (int i =1;i<=DETAIL.length;i++)
result.addValue("COUNTER=" + i);
but if you want Your Target as
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_DATA xmlns:ns0="http://yash.com.YH1309">
<DATA>
<DETAIL>1</DETAIL>
<DETAIL>2</DETAIL>
</DATA>
<DATA>
<DETAIL>1</DETAIL>
<DETAIL>2</DETAIL>
<DETAIL>3</DETAIL>
</DATA>
</ns0:MT_DATA>
So please Follow abhishek salvi's reply -
External context mapping problem
Hi,
I am trying to create a sample application for external context mapping
1. I created a webdynpro project.
2. In that project i created 2 web dynpro components PrComp and ChComp.
3. In the ChComp Interface controller context created a node MappedNode with attribute text.The node property isInputElement is set to true and also the carinality to 0..1
4. Added the ChComp as Used Component for PrComp.
5. Mapped the context of the ChComp Interface controller to ChComp Component controller and PrComp component Controller.
6. In the ChComp Component controller, i initialize the node atribute text with some value.
public void wdDoInit()
//@@begin wdDoInit()
wdContext.currentMappednodeElement().setMappedText("Mapped Attribute");
//@@end
7. In the PrComp component controller i create the ChComp and try to retrieve the value of the node attribute text.
public void wdDoInit()
//@@begin wdDoInit()
wdThis.wdGetChildCompComponentUsage().createComponent();
String text = wdContext.currentMappednodeElement().getMappedText();
wdComponentAPI.getMessageManager().reportSuccess("mapped value "+text);
//@@end
When i deploy and run the application i get the following error
java.lang.NullPointerException
at com.sap.tc.ram.sample.external.context.mapping.ChComp.wdDoInit(ChComp.java:98)
I am creating this app as a sample for external context mapping.please tell me if i am doing the rigth thing.Shiram,
Your code will not work until you remove any node access from wdDoInit in ChComp (step 6).
Think about the actual execution sequence:
1. PrComp creates usage of child (ChComp) via createComponent
2. ChComp get initialized internally by WD framework, as part of process ChComp.wdDoInit is invoked
3. Context mapping is applied parent(source) <->child(target)
So step [2] happens always before [3], you didn't alter this behavior via cardinality as suggested by other readers.
What you can to do?
1. Do not use wdDoInit of ChComp to populate / access data. Populate data from PrComp instead.
2. Do you really need isInputElement? Think about it. If you remove isInputElement setting in child, then create mapped node in parent, then node in child will be source of data and you may safely populate it ChComp.wdDoInit.
And, as other pointed out, cardinality still can cause error -- you are using 0..* but not creating element manually. Either set cardinality to 1..* or create element in wdDoInit of "source" controller (PrComp for [1], ChComp for [2])
Valery Silaev
SaM Solutions
http://www.sam-solutions.net -
Mapping query for context change without UDF
Hi,
My requirement is as below:
Input queues are
4319, 4319,4320,4321,4321
M1,M1,M1,M2,M2,M2
Required output is
4319,4320,CC,4321
COntext change is to be inserted when there is a change in value in second queue.
regards, Anirudh.Hi,
Have you tried using the formatByExample as specified?
input1-->removeContext--> concat --> splitByValue:ValueChanged --> collapseContext --> substring (2..6) --> formatByExample (1) --> Target
input2-->removeContext--> /
input1-->removeContext--> concat --> splitByValue:ValueChanged --> collapseContext --> substring (0..2) --> splitByValue:ValueChanged -->formatByExample (2)
input2-->removeContext--> /
code explanation
input1 and input 2 when concatted outputs M12319,M12319,M12320,M22321,M22321,M22321
The upper part of the code does this: M12319,M12320,M22321, when you use the substring it outputs now 2319,2320,2321
The lower part of the code does this: M12319,M12320,M22321, when you use the substring it outputs
M1,M1,M2, then you use splitByValue. The output is now M1,M1,CC,M2.
When you input the code from the upper part and lower part into a formatByExample node, the output becomes
2319,2320,CC,2321
Hope this helps, -
Mapping Problem ORDERS Idoc to Edifact
Hi,
I have a mapping problem with the IDOC ORDERS:
I get the IDOC with several E1EDP01. Each E1EDP01 has several E1EDPT1, where i want only the first one (which I get over the TDID value). Each E1EDPT1 has min. 1 E1EDPT2.
Now I have to map each field TDLINE from first two E1EDPT2 of the first E1EDPT1 to the Edifact fields /LIST/S_UNB/S_UNH/G_SSG25/S_LIN/S_IMD[1]/C_C273/D_7008 (from the first E1EDPT2) and, if a second E1EDPT2 exists in /LIST/S_UNB/S_UNH/G_SSG25/S_LIN/S_IMD[1]/C_C273/D_7008_2.
I use following UDF:
//a = TDLINE
//b = Number of entry in the List
int pos =Integer.parseInt(b[0]);
if ( pos < a.length )
result.addValue(a[pos]);
else
result.addValue(ResultList.SUPPRESS);
Unfortunatly, I think becaus of the context problems (not every E1EDPT1 has two E1EDPT2), it's not working. Could somebody help me with this problem?
Thanks in advance
DominicDear Dominic ,
I had same problem when I was trying to do the same thing for FTX segment.
Your UDF is fine but you don't need else condition.
//a = TDLINE
//b = Number of entry in the List
int pos =Integer.parseInt(b[0]);
if ( pos < a.length )
result.addValue(a[pos]);
for C_C273 assigned contant value and
D_7008 assigned TDLINE but change the context to E1EDPT1
and for D_7008_2
TDLINE(context to E1EDPT1 )
====>UDF====>D_7008_2
Contant(=1)
It should work becasue my map is working fine. If not let me know error message.
Thanks
Shubhankar -
IDoc to EDI mapping problem (Invoic01 to 810 v4010)
Hi,
I have a problem with my invoice mapping.
I need to exclude children parts from the outbound EDI invoice.
In my mapping I was able to control the number of lines that should go out from the top line item node level using:
G_SIT1 -> If E1EDP02-QUALF = 002 then E1EDP02-ZEILE->Remove Context->SplitByValue->CollapseContext->G_STI1
I have the right amount of lines but the fields under G_STI1 are wrong since I'm missing the last ones.
Then I tried different combinations + playing with the contexts and played again with the top node and my conclusion is that it might be easier to exclude them in IDoc in SAP using an UserExit?!?
Anybody was able to get around this problem without changing the IDoc in R/3?Can I filter on a partner type KU? I need to customize an outboud invoice to not send some segments.
Or is it only for type LS?
Rgds,
Yves -
Hello,
I'm stuck with a complex mapping issue that I can't figure out. I'm trying to pull 0..N Variant Configuration segments from the ORDERS IDOC and map it into a 0..N XML segment.
The inbound ORDERS IDOC is structured like this:
IDOC
...E1EDP01 (Item segment 0..N)
......E1EDP19 (Product data 0..5)
...........Z1EDPIT (Configuration Data 0..N)
.................ATUE1 (Description)
.................ZCODE (Category)
.................RTWTB (Value)
Target XML:
Order
....Item (Item segment 0..N)
.......Product (Product data 0..1)
............VariantConfig (configuration data 0..N)
....................Description
....................Category
.....................Value
I need to create a new VariantConfig segment in my XML for every Z1EDPIT segment for that PO Item. But I need to skip any Z1EDPIT segments when ATUE1 = 'OPTIONS' or when ATUE1 does not exist.
The problem I'm running into is that my mapping is capable of creating the VariantConfig segment under those conditions but the following mappings used to create the Description/Category/Value are unable to skip the Z1EDPIT segments.
For example:
IDOC
...E1EDP01
......E1EDP19
...........Z1EDPIT
.................ZCODE = REQT
.................RTWTB = 5644
...........Z1EDPIT
.................ATUE1 = Finish
.................ZCODE = REQT
.................RTWTB = 7712
The output XML should read:
Order
....Item
.......Product
............VariantConfig
....................Description = Finish
....................Category = REQT
.....................Value = 7712
So I determine to create the VariantConfig segment if ATUE1 exists and does not equal 'OPTIONS'. So my mapping creates one VariantConfig segment because the second Z1EDPIT qualifies. But each element within that node is reverting back to the first Z1EDPIT segment.
I thought the top of the Node (VariantConfig) would determine the context for the following fields. Therefore, when the 2nd Z1EDPIT segment generates the VariantConfig node then the elements should refer to the current context of the root node (VariantConfig).
What tools does PI's mapping provide to resolve a situation like this?
Any suggestions?
Thanks,
MattJob,
Thanks, for the responses!
What do you mean by "add a context change for the fields".
Is there some mapping function to add a context change or is this a UDF I need to write to handle the context changes when ATUE1 is missing or equal to "OPTIONS".
In my example:
VariantConfig:
ATUE1 (E1EDP01) >mapWithDefault [OPTIONS] equatsS [OPTIONS] -> Not ->createIf->VariantConfig
Sub Element
Category
ATUE1 (E1EDP01) >mapWithDefault [OPTIONS] equatsS [OPTIONS] -> Not ->ifWithoutElse>ZCODE->Category
The problem is that this does not keep the ATUE1 and the ZCODE in the same Z1EDPIT segment. So I get the first ZCODE value when I only want the 2nd. Even if I insert a context change I can't say for sure that next time I won't have 5 Z1EDPIT segments missing the ATUE1 segment before I find my first good segment that I need to map.
...confused...
Thanks,
Matt -
Add a context change after a set of values in a context
Dear experts,
My requirement is as follows:
Scenario: Idoc to Idoc. I need to check if there are line items > 5- I need to do a split. The split is happening properly via my mapping but I have a problem at the header record level on the target- I do not get the values populated correctly. I need to add a context change after 5 values in the queue.
eg:
Say there are 2 Idocs at the source with following unique IDs: called Journal ID:
My source:
Idoc 1: Journal ID 123
Line Itme 1
Line Item 2
Idoc 2: Journal ID 124
Line item 1
Line item 2
Line item 3
Line item 4
Line item 5
Line item 6
Line item 7
So I need to get total of three Idocs in my target:
Idoc 1: Journal Entry 123
Line Item 1
Line Item 2
Idoc2: Journal Entry 124
Line item 1
Line item 2
Line item 3
Line item 4
Line item 5
Idoc3: Journal entry 124
Line item 6(new 1)
Line item 7(new 2)
The split in the target Idoc is working perfectly. But inside the header record the journal ID field(taken from Item record level) is not populating correctly. I am getting this output:
Idoc 1: Journal Entry 123
Header Record-->JournalID Field value= '123'
Line Item 1
Line Item 2
Idoc2: Journal Entry 124
Header Record-->JournalID Field value= '124'
Line item 1
Line item 2
Line item 3
Line item 4
Line item 5
Idoc3: Journal entry 124
Header Record-->JournalID Field value= Null
Line item 6(new 1)
Line item 7(new 2)
So please suggest a UDF/standard function to populate the right values inside header record--->Journal ID field.Something like the below...
public void calculate(String[] var1, ResultList result, Container container) throws StreamTransformationException{
for ( int i = 0; i < var1.length; i++ )
if( var1[i].length() > 5) //here var1 I am passing the Journal ID
result.addContextChange();
Apparently this doesnt work.The first Idoc has two line items and the second idoc has 7 line items. As the split is per 5 line item- the target has 3 Idocs.
Now the problem is that the header value in the target: REF_DOC_NO has to be created as per the number of line items and doesnt come from header record directly. -
Problems with ViaVoice under Leopard, especially key mapping problems
ViaVoice's behavior has changed considerably under Leopard. First I will discuss the key mapping problem, since I'm eagerly looking for an answer to this problem. At the end of this post, I will voice some of the other problems I've experienced for those who may be interested. The key mapping problem may be specific to the fact that I use a foreign keyboard with a US version of ViaVoice.
INTRO:
I have used ViaVoice on my Mac for years, more or less without problems (ViaVoice's bugginess is notorious).
Those who know ViaVoice will know that one has two general options for dictation. One can dictate into ViaVoice's so-called SpeakPad, which allows special formatting, editing and dictation error correction within the dictated text, or one can dictate into "external" software such as Microsoft Word, in which case ViaVoice just sends a string of characters to that software. SpeakPad appears to make strong use of the operating system's built-in functionality for character formatting, document formatting, etc.
*MY PROBLEM*
I have a German keyboard on my PowerBook, yet dictate in US English. When I dictated into SpeakPad under Tiger, all characters appeared correctly. However, when I dictated into Microsoft Word using Tiger, I had to switch the keyboard mapping from German to US to get all characters (that means including the characters that are located at different positions on a German keyboard than they are on a US keyboard such as y, z, apostrophes and parentheses) to appear correctly.
Under Leopard, things have changed. Now it doesn't matter whether I dictate into SpeakPad or Word; the results are the same and many characters do not appear correctly.
If set to a German keyboard, y and z appear as expected. To name a few irregularities:
"(" appears as ")"
")" appears as "="
apostrophes appear as "#" and
";" appears as ","
If set to a US keyboard, y and z are interchanged. "(" and ")" appear as expected. Apostrophes appear as "\" and ";" appears as ","
By comparison, if typed (as opposed to dictated, as in the examples above) "correctly" (i.e. based on the letters printed on the keyboard) on a German keyboard set to imitate a US keyboard:
y and z are interchanged
apostrophes appear as "|"
"(" appears as "*"
")" appears as "(" and
";" appears as the symbol for "less than"
Since I don't have a US keyboard, I can't say how it would behave if set to imitate a German keyboard, i.e. if there's a correlation to the results I get when I dictate.
Since I was previously able to dictate correctly into SpeakPad by setting the keyboard to "German" and into Word by setting the keyboard to "US," I presume that this is a problem in Leopard, not ViaVoice.
*OTHER PROBLEMS WITH VIAVOICE UNDER LEOPARD*
In addition to the aforementioned key mapping problems (that may be specific to those of us with foreign keyboards), ViaVoice appears to have lost considerable functionality in Leopard. I cannot access SpeakPad's Preferences and the correction window. Moreover, the traffic-light like window buttons have disappeared from the VoiceCenter (although they work if you click where they should be). SetupAssistent appears to function.
I've written to Nuance about these problems, but have little hope that they will invest the time in producing a patch since they haven't released any updates since 2003.Thrums1,
I've never had to "register" ViaVoice after updating the system. I thus suspect you haven't fully followed my above, three-step advice (particularly step 3).
1) Reinstall ViaVoice from CD.
2) Update to the latest version (using the patch downloadable from Nuance's website).
3) Replace the “temp” and “users” folders (in the "ViaVoice" folder at the upper level of your home directory) by a previous copy thereof. When I say previous copy, I mean a copy from when ViaVoice was still working properly, e.g. a copy from when it was running under Tiger.
As I said, I've gotten ViaVoice to survive several system updates by following the above steps. To my knowledge, the last step is critical since it saves you from having to reconfigure ViaVoice under the new operating system (in this case Leopard). I suspect that ViaVoice is crashing on your system because it's trying to start some module of the SetUpAssistant that is incompatible with Leopard (as many are). If you instead use old copies of the "temp" and "users" folders (from the previous system), then ViaVoice doesn't have to go through the initial "registration" process; ViaVoice doesn't need the SetUpAssistant; and all is (more or less) fine.
Good luck!
BTW, to my knowledge, Dictate only runs on Intel Macs. It thus won't run on a G4 iBook, just as it won't run on my PowerBook G4. -
Mapping problem with compressed key update record
Hi, could you please advise?
I'm getting the following problem:
About a week ago replicat abened with "Error in mapping" error. I found in discard file some record looking like:
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Where filed9 = @GETENV("GGHEADER", "COMMITTIMESTAM"), field10 = = @GETENV("GGHEADER", "COMMITTIMESTAM"), others are table fields mapped by USEDEFAULTS
So I got Mapping problem with compressed key update record at 2012-06-01 15:44
I guess I need to mention that extract failed in 5 minuts before it with: VAM function VAMRead returned unexpected result: error 600 - VAM Client Report <[CFileInfo::Read] Timeout expired after 10 retries with 1000 ms delay, waiting to read transaction log or backup files. To increase the number of retries, use SETENV (GGS_CacheRetryCount = n) in Extract parameter file. To control retry delay time, use SETENV (GGS_CacheRetryDelay = n). handle: 0000000000000398 ReadFile GetLastError:997 Wait GetLastError:997>.
I don't know if it has ther same source as data corruption, could you tell me if it is?
Well, I created new extract, starting 2012-06-01 15:30 to check if there was something with extract at the time, but got the same error.
If I run extract beging at 15:52 it starts and works.
But well, I got another one today. Data didn't look that bad, but yet one column came with null value:( And I'm using it as a key column, so I got Mapping problem with compressed key update record again:(
I'm replicating from SQL Server 2008 to Oracle 11g.
I'm actually using NOCOMPRESSUPDATES in Extract.
CDC is enabled for all tables replicated. The only thing is that it is enabled not by ADD TRANDATA command, but by SQL Server sys.sp_cdc_enable_table, does it matter?
Could you please advise why does it happen?Well, the problem begins somewhere in extract or before extract, may be in transaction log, I don't know:(
Here are extract parameters:
EXTRACT ETCHECK
TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
SOURCEDB TEST, USERID **, PASSWORD *****
exttrail ./dirdat/ec
NOCOMPRESSUPDATES
NOCOMPRESSDELETES
TABLE tst.table1, COLS (field1, field2, field3, field4, field5, field6, field7, field8 );
TABLE tst.table2, COLS (field1, field2, field3, field4 );
Data pump:
EXTRACT DTCHECK
SOURCEDB TEST, USERID **, PASSWORD *****
RMTHOST ***, MGRPORT 7809
RMTTRAIL ./dirdat/dc
TABLE tst.table1;
TABLE tst.table2;
Replicat:
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
Rpt file for replicat:
Oracle GoldenGate Delivery for Oracle
Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
Windows x64 (optimized), Oracle 11g on Apr 22 2011 00:34:07
Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
Starting at 2012-06-05 12:49:38
Operating System Version:
Microsoft Windows Server 2008 R2 , on x64
Version 6.1 (Build 7601: Service Pack 1)
Process id: 2264
Description:
** Running with the following parameters **
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
CACHEMGR virtual memory values (may have been adjusted)
CACHEBUFFERSIZE: 64K
CACHESIZE: 512M
CACHEBUFFERSIZE (soft max): 4M
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 1G
CACHESIZEMAX (strict force to disk): 881M
Database Version:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Database Language and Character Set:
NLS_LANG = "AMERICAN_AMERICA.CL8MSWIN1251"
NLS_LANGUAGE = "AMERICAN"
NLS_TERRITORY = "AMERICA"
NLS_CHARACTERSET = "CL8MSWIN1251"
For further information on character set settings, please refer to user manual.
** Run Time Messages **
Opened trail file ./dirdat/dc000000 at 2012-06-05 12:49:39
2012-06-05 12:58:14 INFO OGG-01020 Processed extract process RESTART_ABEND record at seq 0, rba 925 (aborted 0 records).
MAP resolved (entry tst.table1):
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
2012-06-05 12:58:14 WARNING OGG-00869 No unique key is defined for table table1. All viable columns will be used to represent the key, but may not guarantee uniqueness. KEYCOLS may be used to define the key.
Using the following default columns with matching names:
field1=field1, field2=field2, field3=field3, field4=field4, field5=field5, field6=field6, field7=field7, field8=field8
Using the following key columns for target table R_019_000001.TCALCULATE: field3.
2012-06-05 12:58:14 WARNING OGG-01431 Aborted grouped transaction on 'tst.table1', Mapping error.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
2012-06-05 12:58:14 WARNING OGG-01151 Error mapping from tst.table1 to tst.table1.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
Source Context :
SourceModule : [er.main]
SourceID : [er/rep.c]
SourceFunction : [take_rep_err_action]
SourceLine : [16064]
ThreadBacktrace : [8] elements
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x143034) [0x00000001402192B4]]
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x11dd44) [0x00000001401F3FC4]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x000000014009F102]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B29CC]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B8887]]
: [C:\App\OGG\replicat.exe(releaseCProcessManagerInstance+0x25250) [0x000000014028F200]]
: [C:\Windows\system32\kernel32.dll(BaseThreadInitThunk+0xd) [0x000000007720652D]]
: [C:\Windows\SYSTEM32\ntdll.dll(RtlUserThreadStart+0x21) [0x000000007733C521]]
2012-06-05 12:58:14 ERROR OGG-01296 Error mapping from tst.table1 to tst.table1.
* ** Run Time Statistics ** *
Last record for the last committed transaction is the following:
Trail name : ./dirdat/dc000000
Hdr-Ind : E (x45) Partition : . (x04)
UndoFlag : . (x00) BeforeAfter: A (x41)
RecLength : 249 (x00f9) IO Time : 2012-06-01 15:48:56.285333
IOType : 115 (x73) OrigNode : 255 (xff)
TransInd : . (x03) FormatType : R (x52)
SyskeyLen : 0 (x00) Incomplete : . (x00)
AuditRBA : 44 AuditPos : 71176199289771
Continued : N (x00) RecCount : 1 (x01)
2012-06-01 15:48:56.285333 GGSKeyFieldComp Len 249 RBA 987
Name: DBO.TCALCULATE
Reading ./dirdat/dc000000, current RBA 987, 0 records
Report at 2012-06-05 12:58:14 (activity since 2012-06-05 12:58:14)
From Table tst.table1 to tst.table1:
# inserts: 0
# updates: 0
# deletes: 0
# discards: 1
Last log location read:
FILE: ./dirdat/dc000000
SEQNO: 0
RBA: 987
TIMESTAMP: 2012-06-01 15:48:56.285333
EOF: NO
READERR: 0
2012-06-05 12:58:14 ERROR OGG-01668 PROCESS ABENDING.
Discard file:
Oracle GoldenGate Delivery for Oracle process started, group RTCHECK discard file opened: 2012-06-05 12:49:39
Key column filed3 (0) is missing from update on table tst.table1
Missing 1 key columns in update for table tst.table1.
Current time: 2012-06-05 12:58:14
Discarded record from action ABEND on error 0
Aborting transaction on ./dirdat/dc beginning at seqno 0 rba 987
error at seqno 0 rba 987
Problem replicating tst.table1 to tst.table1
Mapping problem with compressed key update record (target format)...
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Process Abending : 2012-06-05 12:58:14
Maybe you are looking for
-
Connect Mac Mini 2011 to iMac 2010 via MiniDisplay Port?
Thought I read somewhere that a Mac mini could be connected to a 27" iMac for display purposes. I have the 27" iMac from 2010 and it has the minidisplay port. I'm considering getting the new Mac Mini. Can the two be connected so that the iMac display
-
Time machine slow, backing up 1,800,000 items of a few MB total?
I recently bought me second time capsule (1st one died) and use time machine to back up. It took some days to get everything on it (i'm patient, and didn't have a network cable), but now it got sort of stuck. Everytime time machine starts, it says th
-
Hey huys, i have one primary site with mp and additional mp for internet clients. Everything works but one thing. Client on that internet mp is not visible in console- it show client = no. Tried to reinstall but nothing helps. Dont know what to do...
-
K7T Turbo2 (MS-6330) Booting problems
Last night, I installed an Athlon XP 1700+ on my K7T Turbo2 mobo. I can not boot into Windows now. Windows XP will hang on loading up mup.sys, and 98 resets at an indeterminate time. I cannot install Windows 98 or XP either, as both hang on the setu
-
Hello! I change my ID Apple and now when I try to make an update, Iphone show me my old ID and ask the password. Why is that? Why the phone don't see my new ID Apple? I can not make any update because the old Apple ID don't work any more. I check and