Mapping problem on CSV to RFC scenerio

Hi all,
I am implementing an CSV to RFC scenerio on SAP XI 3.0, but stuck on a mapping issue. Please find the message, below;
com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns1:Z_READ_CSV. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:357) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:60) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at ...
I do not face any kind of error on mapping test and see the source and result documents, below;
Source;
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Csv xmlns:ns0="http://com.sap.astron/tekkasa">
   <mydoc>
      <itemList>
         <items>
            <fld1>1</fld1>
            <fld2>2</fld2>
            <fld3>3</fld3>
         </items>
         <items>
            <fld1>4</fld1>
            <fld2>5</fld2>
            <fld3>6</fld3>
         </items>
      </itemList>
   </mydoc>
</ns0:MT_Csv>
Result:
<?xml version="1.0" encoding="UTF-8"?>
<ns1:Z_READ_CSV xmlns:ns1="urn:sap-com:document:sap:rfc:functions"><ITAB_ZCSV><item><FLD1>1</FLD1><FLD2>2</FLD2><FLD3>3</FLD3></item><item><FLD1>4</FLD1><FLD2>5</FLD2><FLD3>6</FLD3></item></ITAB_ZCSV></ns1:Z_READ_CSV>
It is interesting that I see the message in payload, below;
<?xml version="1.0" encoding="utf-8"?>
<mydoc>
<itemList>
     <items>
          <fld1>1</fld1>
          <fld2>2</fld2>
          <fld3>3</fld3>
     </items>
     <items>
          <fld1>4</fld1>
          <fld2>5</fld2>
          <fld3>6</fld3>
     </items>
</itemList>
</mydoc>
Anyone has a suggestion about the problem? Thank you very much.

Hi Shabarish;
I pasted complete output, below. I would be very appreciated, if you could suggest a solution. Thank you.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?> <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30"><SOAP:Header><SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7"><SAP:MessageClass>ApplicationMessage</SAP:MessageClass><SAP:ProcessingMode>asynchronous</SAP:ProcessingMode><SAP:MessageId>977D6A50-91B1-11DC-A122-00145E6896FD</SAP:MessageId><SAP:TimeSent>2007-11-13T06:28:05Z</SAP:TimeSent><SAP:Sender><SAP:Service>GarantiTekKasaFtp</SAP:Service><SAP:Interface namespace="http://com.sap.astron/tekkasa">MI_Outbound_Async</SAP:Interface></SAP:Sender><SAP:Receiver><SAP:Party agency="" scheme=""/><SAP:Service>B3T003</SAP:Service><SAP:Interface namespace="urn:sap-com:document:sap:rfc:functions">Z_READ_CSV</SAP:Interface><SAP:Mapping notRequired="M"><SAP:ObjectId>5bz79NusOaWn/LbMSmdpTA==</SAP:ObjectId><SAP:SWCV>rsCz8ZEJEdycocVZCkEBQg==</SAP:SWCV><SAP:SP>-1</SAP:SP></SAP:Mapping></SAP:Receiver><SAP:Interface namespace="http://com.sap.astron/tekkasa">MI_Outbound_Async</SAP:Interface></SAP:Main><SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:QualityOfService>ExactlyOnce</SAP:QualityOfService></SAP:ReliableMessaging><SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand=""><SAP:Category>Application</SAP:Category><SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code><SAP:P1>com/sap/xi/tf/_MM_CSV_</SAP:P1><SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2><SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3><SAP:P4/><SAP:AdditionalText/><SAP:ApplicationFaultMessage namespace=""/><SAP:Stack>During the application mapping com/sap/xi/tf/_MM_CSV_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeException in Message-Mapping transformatio~
</SAP:Stack><SAP:Retry>M</SAP:Retry></SAP:Error><SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Hop timeStamp="2007-11-13T06:28:05Z" wasRead="false"><SAP:Engine type="AE">af.yxi.yxint01</SAP:Engine><SAP:Adapter namespace="http://sap.com/xi/XI/System">XIRA</SAP:Adapter><SAP:MessageId>977D6A50-91B1-11DC-A122-00145E6896FD</SAP:MessageId><SAP:Info/></SAP:Hop><SAP:Hop timeStamp="2007-11-13T06:28:05Z" wasRead="false"><SAP:Engine type="IS">is.00.yxint01</SAP:Engine><SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter><SAP:MessageId>977D6A50-91B1-11DC-A122-00145E6896FD</SAP:MessageId><SAP:Info>3.0</SAP:Info></SAP:Hop></SAP:HopList><SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"><SAP:Date>20071113</SAP:Date><SAP:Time>082805</SAP:Time><SAP:Host>yxint01</SAP:Host><SAP:SystemId>YXI</SAP:SystemId><SAP:SystemNr>00</SAP:SystemNr><SAP:OS>Windows NT</SAP:OS><SAP:DB>ORACLE</SAP:DB><SAP:Language/><SAP:ProcStatus>014</SAP:ProcStatus><SAP:AdapterStatus>000</SAP:AdapterStatus><SAP:User>XIAFUSER</SAP:User><SAP:TraceLevel>1</SAP:TraceLevel><SAP:Logging>1</SAP:Logging><SAP:LogSeqNbr>006</SAP:LogSeqNbr><SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr><SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal><SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal><SAP:PipelineElementId>5EC3C53B4BB7B62DE10000000A1148F5</SAP:PipelineElementId><SAP:PipelineStartElementId>5EC3C53B4BB7B62DE10000000A1148F5</SAP:PipelineStartElementId><SAP:PipelineService>PLSRV_MAPPING_REQUEST</SAP:PipelineService><SAP:QIdInternal>XBTO6___0002</SAP:QIdInternal><SAP:CommitActor>X</SAP:CommitActor><SAP:SplitNumber>0</SAP:SplitNumber><SAP:NumberOfRetries>0</SAP:NumberOfRetries><SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries><SAP:TypeOfEngine client="294">CENTRAL</SAP:TypeOfEngine><SAP:PlsrvExceptionCode/><SAP:EOReferenceRuntime type="TID">0A4101420318473943F5015F</SAP:EOReferenceRuntime><SAP:EOReferenceInbound type="TID"/><SAP:EOReferenceOutbound type="TID"/><SAP:MessageSizePayload>234</SAP:MessageSizePayload><SAP:MessageSizeTotal>2690</SAP:MessageSizeTotal><SAP:PayloadSizeRequest>234</SAP:PayloadSizeRequest><SAP:PayloadSizeRequestMap>0</SAP:PayloadSizeRequestMap><SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse><SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap><SAP:Reorganization>INI</SAP:Reorganization><SAP:AdapterInbound>AENGINE</SAP:AdapterInbound><SAP:InterfaceAction>DEL</SAP:InterfaceAction><SAP:RandomNumber>06</SAP:RandomNumber><SAP:AckStatus>000</SAP:AckStatus><SAP:SkipReceiverDetermination/><SAP:Sender_Agreement_GUID>E8E1DEF39D603F158F70394833EF0ADE</SAP:Sender_Agreement_GUID><SAP:Serialize_Children>X</SAP:Serialize_Children></SAP:RunTime><SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30"><SAP:RunTimeItem><SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name><SAP:Timestamp type="begin" host="yxint01">20071113062805.39</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name><SAP:Timestamp type="end" host="yxint01">20071113062805.406</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name><SAP:Timestamp type="begin" host="yxint01">20071113062805.406</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name><SAP:Timestamp type="end" host="yxint01">20071113062805.406</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name><SAP:Timestamp type="begin" host="yxint01">20071113062805.406</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name><SAP:Timestamp type="end" host="yxint01">20071113062805.515</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name><SAP:Timestamp type="begin" host="yxint01">20071113062805.515</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name><SAP:Timestamp type="end" host="yxint01">20071113062805.531</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name><SAP:Timestamp type="begin" host="yxint01">20071113062805.531</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name><SAP:Timestamp type="end" host="yxint01">20071113062805.531</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name><SAP:Timestamp type="begin" host="yxint01">20071113062805.546</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name><SAP:Timestamp type="end" host="yxint01">20071113062805.546</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name><SAP:Timestamp type="begin" host="yxint01">20071113062805.546</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name><SAP:Timestamp type="end" host="yxint01">20071113062805.64</SAP:Timestamp></SAP:RunTimeItem><SAP:RunTimeItem><SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name><SAP:Timestamp type="begin" host="yxint01">20071113062805.64</SAP:Timestamp></SAP:RunTimeItem></SAP:PerformanceHeader><SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:TraceLevel>Information</SAP:TraceLevel><SAP:Logging>Off</SAP:Logging></SAP:Diagnostic><SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30"><Trace level="1" type="T">Party normalization: sender </Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external = </Trace>
<Trace level="1" type="T">Sender party normalized = </Trace>
<Trace level="1" type="T">Party normalization: receiver </Trace>
<Trace level="1" type="T">Receiver scheme external = </Trace>
<Trace level="1" type="T">Receiver agency external = </Trace>
<Trace level="1" type="T">Receiver party external = </Trace>
<Trace level="1" type="T">Receiver party normalized = </Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST"></Trace>
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="1" type="T">COMMIT is done by XMB ! </Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS"></Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE"></Trace>
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE">
</Trace>
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">
</Trace>
<Trace level="1" type="T">**************************************************** </Trace>
<Trace level="1" type="T">*                                                  * </Trace>
<Trace level="1" type="T">*                                                  * </Trace>
<Trace level="1" type="T">XMB entry processing </Trace>
<Trace level="1" type="T">system-ID = YXI</Trace>
<Trace level="1" type="T">client = 294</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = XIAFUSER</Trace>
<Trace level="1" type="Timestamp">2007-11-13T06:28:05Z CET </Trace>
<Trace level="1" type="T">*                                                  * </Trace>
<Trace level="1" type="T">*                                                  * </Trace>
<Trace level="1" type="T">**************************************************** </Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE"></Trace>
<Trace level="1" type="T">Message-GUID = 977D6A5091B111DCA12200145E6896FD</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC"></Trace>
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
</Trace>
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="1" type="T">Queue name : XBTI0002</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0002</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment </Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK! </Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message </Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking </Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST </Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC </Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye ! </Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST"></Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC"></Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = YXI</Trace>
<Trace level="1" type="T">client = 294</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = XIAFUSER</Trace>
<Trace level="1" type="Timestamp">2007-11-13T06:28:05Z CET </Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC"></Trace>
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N </Trace>
<Trace level="1" type="T"> Cache Content is up to date </Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
</Trace>
<Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N </Trace>
<Trace level="1" type="T"> Cache Content is up to date </Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
</Trace>
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT"></Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL"></Trace>
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV"></Trace>
<Trace level="1" type="T">number of receivers: 1 </Trace>
<Trace level="1" type="T">Single-receiver split case </Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTO6___0002</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling </Trace>
<Trace level="1" type="T"> </Trace>
<Trace level="1" type="T">Going to persist message + call qRFC now... </Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking </Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST </Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye ! </Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST"></Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC"></Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = YXI</Trace>
<Trace level="1" type="T">client = 294</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = XIAFUSER</Trace>
<Trace level="1" type="Timestamp">2007-11-13T06:28:05Z CET </Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC"></Trace>
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
<Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST"></Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV"></Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL"></Trace>
<Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV"></Trace>
<Trace level="1" type="T">Interface Mapping http://com.sap.astron/tekkasa IM_CSV </Trace>
<Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_MM_CSV_ </Trace>
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns1:Z_READ_CSV. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd
     at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:357)
     at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:60)
     at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105)
     at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64)
     at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91)
     at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90)
     at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95)
     at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68)
     at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79)
     at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187)
     at $Proxy186.processFunction(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100)
     at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113)
     at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Root Cause:
com.sap.aii.mappingtool.tf3.IllegalInstanceException: Cannot produce target element /ns1:Z_READ_CSV. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd
     at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:212)
     at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:352)
     at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:60)
     at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105)
     at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64)
     at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91)
     at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90)
     at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95)
     at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68)
     at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79)
     at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187)
     at $Proxy186.processFunction(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100)
     at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113)
     at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
</Trace>
<Trace level="1" type="T">Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_MM_CSV_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Cannot produce target element /ns1:Z_READ_CSV. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd </Trace>
<Trace level="1" type="T">com.sap.aii.ibrun.server.mapping.MappingRuntimeException: Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_MM_CSV_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Cannot produce target element /ns1:Z_READ_CSV. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd
     at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:73)
     at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91)
     at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90)
     at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95)
     at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68)
     at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79)
     at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187)
     at $Proxy186.processFunction(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100)
     at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113)
     at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Root Cause:
com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns1:Z_READ_CSV. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd
     at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:357)
     at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:60)
     at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105)
     at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64)
     at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91)
     at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90)
     at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95)
     at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68)
     at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79)
     at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187)
     at $Proxy186.processFunction(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100)
     at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113)
     at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Root Cause:
com.sap.aii.mappingtool.tf3.IllegalInstanceException: Cannot produce target element /ns1:Z_READ_CSV. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd
     at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:212)
     at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:352)
     at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:60)
     at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105)
     at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64)
     at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91)
     at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90)
     at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95)
     at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68)
     at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79)
     at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187)
     at $Proxy186.processFunction(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100)
     at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113)
     at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
</Trace>
<Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
</Trace>
<Trace level="1" type="System_Error">Error exception return from pipeline processing! </Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST"></Trace>
</SAP:Trace></SOAP:Header><SOAP:Body><SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7"><SAP:Payload xlink:href="cid:[email protected]"><SAP:Name>MainDocument</SAP:Name><SAP:Description/><SAP:Type>Application</SAP:Type></SAP:Payload></SAP:Manifest></SOAP:Body></SOAP:Envelope>

Similar Messages

Problem in FILE to RFC scenerio

Hi,
I am working on File to RFC Scenerio
I am getting a problime in Communication channel (Sender).
The problem is coming in File COntent Conversion
Parameters are like
Documenet name : MT_ROXY ( ->Header -> EMPNO
                                                             -> EMPNAME
                                                             -> DEPTNAME)
Recordset Name: Details
Recordset str     : HEADER,*
Recordset Seq   : Variable
" per message   :*
Conersion Params:
ignoreRecordsetName : True
HEADER.addHeaderLine : 0
HEADER.fieldSeperator: ,
HEADER.endSeperator: 'nl'
HEADER.fieldFixedLengths : 12,40,40
HEADER.fieldNames          :EMPNO,EMPNAME,DEPARTMENTNAME
HEADER.lastFieldsOptional : YES
Problem:The message content i am getting is like
<ns:MT_ABAPPROXY>
−
     <HEADER>
<EMPNO>IT,Munish,22</EMPNO>
</HEADER>
−
     <HEADER>
<EMPNO>IP,Munish1,2</EMPNO>
</HEADER>
−
     <HEADER>
<EMPNO>IS,Munish2,2</EMPNO>
</HEADER>
−
     <HEADER>
<EMPNO>IQ,Munish3,2</EMPNO>
</HEADER>
−
     <HEADER>
<EMPNO>IR,Munish4,2</EMPNO>
</HEADER>
</ns:MT_ABAPPROXY>
as it does not dividing the Fields by ,
as it shud come like
<EMPNO>IR,2</EMPNO>
<EMPNAME>Munish5</EMPNAME>?
<DEPARTMENTNAME>2</DEPARTMENTNAME>
but its not taking the other 2 filds and not separating by , sepreator,
Kindly guide me in solving this problem on urgent basis
Thanks in Advance
Munish SIngh

HI,
Then use only fieldSeparator see the spelling it should be in proper case.
refer the below weblog for more information:
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
Also refer the file FCC parameters.
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
Thnx
Chirag

Mapping problem in message response RFC -- xi -- JDBC

Hi all,
I'm using the follow scenario:
RFC <-> xi <-> JDBC
It's a synchronous interface.
In JDBC the message do a SELECT in database and returns selected rows in message response.
The message response transfers selected rows to RFC.response in the mapping.
It seems working right but no data are transfered to RFC.
In SXMB_MONI I can see the selected rows from database.
There is no error in JDBC and RFC adapter. Bellow is the message response in the SXMB_MONI:
<ns1:MT_jbdc_select_response xmlns:ns1="http://braskem.com.br/xi/sapxi03">
<t7_productionorder_response>
<row>
<PRODUCT>Nafta Media</PRODUCT>
</row>
<row>
<PRODUCT>Nafta Media</PRODUCT>
</row>
</t7_productionorder_response>
</ns1:MT_jbdc_select_response>
I think that there is an error in message mapping between RFC.response <-- message_response, because I'm just mapping the fields <row> and <product>, because if I make a link beteween <t7_productionorder_response> and return table of RFC, a Short DUMP happens.
Bellow the structure of MESSAGE RESPONSE:
   <t7_productionorder_response>
      <row>
         <PRODUCT/>
      </row>
   </t7_productionorder_response>
Bellow the structure of RFC RESPONSE:
<RFC.response>
<t_return>
     <item>
         <product/>
     </item>
</return>
</RFC.response>
When I make a link in the mapping between
<t7_productionorder_response> -> <t_return>
a short DUMP happens in RFC call in R/3.
Anyone could help me about this problem ?
Thanks in advance
Regis Ferrato

Hi,
<i>because if I make a link beteween <t7_productionorder_response> and return table of RFC, a Short DUMP happens.</i>
After doing this mapping, did you test it in the IR mapping editor? was it successful?
Do specify the occurence of all the headers so we can help you better.
Regards,
Smitha.

Problem in Picking the file in FTP to RFC Scenerio

Hi,
I am using FTP to RFC scenerio, i have a CSV file and need to use file Content COnversion at the sender Communication Channel. But its not picking up the file from my FTP..
My data is like
11    Munish     IT
My Message Type is like :
MT_ABAPPROXY ->
             HEADER    ->>
                                Empno
                                Empname
                                Departmentname
My Communication channel is like this..
Transport Protocol:FTP
Message Protocol:FIle COntent COnversion
SOurce Directory : /
File name:            file.csv
then Server name and port is corrwctly configured
My messe Content COnversion is like this
Doc Name:MT_ABAPPROXY
Namespace:http://www.munnamespace.com
Recordsetname:Details
Rec Str :            HEADER,*
HEADER.fieldSeperator     ','
HEADER.fieldNames    Empno,Empname,Departmenname
HEADER.lastFieldsOptional   YES
HEADER.fieldFixedLengths    12,24,24
ignoreRecordsetName         true
HEADER.endSeperator     'nl'
But it is unable to pick the file , but if i wont use file conten conversion , it picks but it has no use as the date is not in XML
SO kindly help me in solving this as the problem is mostly in File COnetent Conversion
Thanks
Munish SIngh

Hi arvind,
thankd for the reply,
i have done the same what u said but i am getting this error in communcation channel monitoring (RWB)
     Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 1 according to structure 'HEADER':java.lang.Exception: Consistency error: field(s) missing - specify 'lastFieldsOptional' parameter to allow this

Problem in mapping xml data with imported RFC parameters

I am currently working on a senario in which a flat file is generated by an RFID server and placed in FTP server.
The flat file is picked up from the FTP server using XI and the contents are mapped to the corresponding imported RFC parameters.
The content of the file which is in text format is successfully converted in XML at the XI side.
File contains records of 2 fields Functional location and RFID equipment number . In the R/3 side these fields
are used as Functional location and equipment number of PM module .
The structure of the FTP message is as follows
<ns:RFID_MSG_TYPE xmlns:ns="urn://sisl:rfiddemo">
<RecordSet>
<Row>
   <FL1>"f1</FL1>
   <FL2>01</FL2>
   <FL3>01</FL3>
   <RFID_NUM>I001"</RFID_NUM>
</Row>
</RecordSet>
</ns:RFID_MSG_TYPE>
After the mapping program which maps the above structure to the imported RFC is executed the following payload document is generated
<ns:ZRFID_EQUIP xmlns:ns="urn:sap-com:document:sap:rfc:functions">
<RECORDS>
<item>
   <FLOC>f1-01-01</FLOC>
   <RFID_NO>I001</RFID_NO>
</item>
</RECORDS>
</ns:ZRFID_EQUIP>
The size of FLOC is 30 of type string and RFID_NO is also a string with size 18.
When the data is brought in R/3 both the fields FLOC and RFID_NO gets mapped in FLOC which is of type char30.

Hi Naveen,
In sxmb_moni the content transmitted to the adapter(RFC)is as follows
<?xml version="1.0" encoding="UTF-8" ?>
- <ns:ZRFID_EQUIP xmlns:ns="urn:sap-com:document:sap:rfc:functions">
- <RECORDS>
- <item>
<FLOC>f1-01-01</FLOC>
<RFID_NO>I006</RFID_NO>
</item>
- <item>
<FLOC>f1-01-02</FLOC>
<RFID_NO>I002</RFID_NO>
</item>
- <item>
<FLOC>f1-01-03</FLOC>
<RFID_NO>I003</RFID_NO>
</item>
- <item>
<FLOC>f1-01-04</FLOC>
<RFID_NO>I004</RFID_NO>
</item>
- <item>
<FLOC>f1-01-05</FLOC>
<RFID_NO>I005</RFID_NO>
</item>
- <item>
<FLOC>f1-01-06</FLOC>
<RFID_NO>I001</RFID_NO>
</item>
</RECORDS>
</ns:ZRFID_EQUIP>
At r/3 side the field floc and rfid_no gets mapped to floc which is of char30
eg floc=f1-01-01I006
   rfid_no=

SOAP to RFC Scenerio: HTTP 500: Internal Server Error

Hi Experts,
    I am facing HTTP 500:Internal server Error. We have SOAP to RFC Scenerio. Interface is working fine, suddenly we are facing this error in Interface. On XI server side - ABAP and JAVA stack are on same Service Pack(SP 13). There is no change done in WSDL and RFC Structure and Mapping side.
Please suggest to resolve this Issue.

Hi Subbu,
   I have found this error in adapter monitoring??.. Please find my finding of XI server related to this below:--
*Error categaory - XI_J2EE_MESSAGING_SYSTEM
Error Code - CALL_ CONSUMER _ERROR
Error :Returning synchornous error notification to calling application:com.sap.aii.af.ra.ms.api.RecoverableException: RecievedHTTP Response code 500:internal Server Error.*
   I have refresh the cache already, but problem still exists.
   Please suggest how to resolve this error.

Problem while calling an RFC Function Module in Background

Hello,
I have created a RFC function module for reading data from an external DB system. The FM calls an external RFC program (coded in C++ using RFC SDK), which delivers the required data. This external program is maintainged as an TCP RFC Connection in SM59.
Further I have created a report, that calls the RFC function module to get the data from the external RFC programm.
My problem is, when I call the report in foreground, everything works OK, the RFC connection works and data can be read from the external program.
However, when I schedule the report to run in background as a job, the report is stating in the protocoll that there was a problem calling the defined RFC connection (although the connection is working properly at that time).
More funny is, this particular problem with running in background occurs only in the productive system, in test and development system the report works correctly also while running as a job in background.
Can you suggest the solution to this problem? Could it be something with authorisations or server settings?
I will be on holiday for the next 6 weeks, so take your time to answer .
Regards,
Dusan.
Edited by: Julius Bussche on Jan 22, 2009 7:19 PM
Please read the forum rules about u r g e n t ...

This is an external RFC server program, not a remote enabled ABAP RFC function module as the others seem to be assuming, right?
Is it possible that your DEV and QAS systems only have one application server, but the PROD has many and dedicated one(s) for processing low priority background jobs?
It might be that the target server of your TCP connection is not this BTC instance, and your RFC server is returning the data "locally" - so, into nirvana...
Just guessing, but might be worth checking.
Cheers,
Julius

Mapping problem with Wireless Keyboard and Japanese iPhone

Hi everyone:
This seems to be a slightly obscure question -- at least, I can't find a ready answer for it with the search terms I've tried, possibly because most people don't use this particular accessory with the iPhone.
I have an iPhone 4 that I bought from and use on Softbank, the carrier in Japan, where I live. While visiting the United States recently, I bought an Apple Wireless Keyboard from an Apple retailer. I wanted to carry it with me for use with my iPhone, so I would reliably have a convenient way to access the Internet without being confined to the touchscreen keyboard. (I live in a rural area where WiFi spots are uncommon, but my iPhone's access to Softbank's data network is fairly good and consistent.)
However, to my frustration, I can't use the keyboard due to a mapping problem. The Bluetooth connection is fine -- the iPhone can discover the keyboard. However, the mapping is off: typing "Q" gets me "A," typing "Z" gets me "W", numbers and punctuation are off, etc. The key point: This is NOT a problem with the International Keyboard settings (under the Settings -> General -> Keyboard -> International Keyboards menu). I have the Keyboard setting set to QWERTY, which is the layout of the Apple keyboard; I have tried all the other possibilities, just in case. None of them work. Setting the Keyboard setting to QWERTY does not make the external QWERTY keyboard map correctly.
The rather ironic addendum is this: While on a recent trip to Tokyo, I visited the Apple store in Shibuya and, after concluding the main business of my visit (discussing my MacBook's battery problems with an English-speaking staffer), I took out my iPhone and keyboard and asked him about my mapping problem. He started with the Keyboard menu, tried the same things I had tried, realized they weren't working, and puzzled over the problem for a while. Then he did this: He hit a key combination (I believe) that brought up a menu on the iPhone's screen. "Ah, there's your problem," he said, and selected a new setting. The problem was instantly fixed.
To my chagrin, however, I neglected to write down what "Ken" had done to fix the problem. Argh... I was looking at the iPhone upside-down; I'd already taken up more than half an hour; people were waiting, and I guess, being used to living in the countryside now, that I'm not used to Shibuya crowds any more. Anyway, I didn't take careful notes or ask him to walk me through it, and now I cannot recall or repeat what he did. And I still can't use my keyboard!
Any ideas or advice, anyone? How did "Ken" fix my problem, and how can I repeat it? Much, much appreciated, in advance.

THAT'S IT. Sir, you have solved my problem. Thank you!!
And I feel a little silly; this will doubtless seem to an expert as if it should have been obvious all along. But isn't that always the way in hindsight?
Here's what happened: The key combination I was trying to remember was "Apple/command + space on the hardware keyboard," as you just said above. The "menu" it brings up is, apparently, a list of keyboards. I take it that this list is the same as the list of the "virtual" keyboards on the iPhone? I have never had more than one external keyboard -- the Apple Wireless -- but I do have several keyboards active virtually, as the iPhone in Japan seems to come with both the "Nihongo Ten-key" and the "Nihongo Romaji" keyboards active, and I added several other languages as well.
When I hit "Apple/command + space," this list comes up on the iPhone's touchscreen. Highlighted and checked at the top is "English," just as if it had been selected all along. But nonetheless, when I first turn on and pair my keyboard with the iPhone, I need to perform this key-combination action, as if to "reselect" English, and then the keyboard promptly starts working properly as QWERTY. I can only assume that one of the others had been default-selected before -- presumably one of the Nihongo ones? -- and that this was causing the interference.
Thank you again! You have made me and my wireless keyboard very happy.

Problems with ViaVoice under Leopard, especially key mapping problems

ViaVoice's behavior has changed considerably under Leopard. First I will discuss the key mapping problem, since I'm eagerly looking for an answer to this problem. At the end of this post, I will voice some of the other problems I've experienced for those who may be interested. The key mapping problem may be specific to the fact that I use a foreign keyboard with a US version of ViaVoice.
INTRO:
I have used ViaVoice on my Mac for years, more or less without problems (ViaVoice's bugginess is notorious).
Those who know ViaVoice will know that one has two general options for dictation. One can dictate into ViaVoice's so-called SpeakPad, which allows special formatting, editing and dictation error correction within the dictated text, or one can dictate into "external" software such as Microsoft Word, in which case ViaVoice just sends a string of characters to that software. SpeakPad appears to make strong use of the operating system's built-in functionality for character formatting, document formatting, etc.
*MY PROBLEM*
I have a German keyboard on my PowerBook, yet dictate in US English. When I dictated into SpeakPad under Tiger, all characters appeared correctly. However, when I dictated into Microsoft Word using Tiger, I had to switch the keyboard mapping from German to US to get all characters (that means including the characters that are located at different positions on a German keyboard than they are on a US keyboard such as y, z, apostrophes and parentheses) to appear correctly.
Under Leopard, things have changed. Now it doesn't matter whether I dictate into SpeakPad or Word; the results are the same and many characters do not appear correctly.
If set to a German keyboard, y and z appear as expected. To name a few irregularities:
"(" appears as ")"
")" appears as "="
apostrophes appear as "#" and
";" appears as ","
If set to a US keyboard, y and z are interchanged. "(" and ")" appear as expected. Apostrophes appear as "\" and ";" appears as ","
By comparison, if typed (as opposed to dictated, as in the examples above) "correctly" (i.e. based on the letters printed on the keyboard) on a German keyboard set to imitate a US keyboard:
y and z are interchanged
apostrophes appear as "|"
"(" appears as "*"
")" appears as "(" and
";" appears as the symbol for "less than"
Since I don't have a US keyboard, I can't say how it would behave if set to imitate a German keyboard, i.e. if there's a correlation to the results I get when I dictate.
Since I was previously able to dictate correctly into SpeakPad by setting the keyboard to "German" and into Word by setting the keyboard to "US," I presume that this is a problem in Leopard, not ViaVoice.
*OTHER PROBLEMS WITH VIAVOICE UNDER LEOPARD*
In addition to the aforementioned key mapping problems (that may be specific to those of us with foreign keyboards), ViaVoice appears to have lost considerable functionality in Leopard. I cannot access SpeakPad's Preferences and the correction window. Moreover, the traffic-light like window buttons have disappeared from the VoiceCenter (although they work if you click where they should be). SetupAssistent appears to function.
I've written to Nuance about these problems, but have little hope that they will invest the time in producing a patch since they haven't released any updates since 2003.

Thrums1,
I've never had to "register" ViaVoice after updating the system. I thus suspect you haven't fully followed my above, three-step advice (particularly step 3).
1) Reinstall ViaVoice from CD.
2) Update to the latest version (using the patch downloadable from Nuance's website).
3) Replace the “temp” and “users” folders (in the "ViaVoice" folder at the upper level of your home directory) by a previous copy thereof. When I say previous copy, I mean a copy from when ViaVoice was still working properly, e.g. a copy from when it was running under Tiger.
As I said, I've gotten ViaVoice to survive several system updates by following the above steps. To my knowledge, the last step is critical since it saves you from having to reconfigure ViaVoice under the new operating system (in this case Leopard). I suspect that ViaVoice is crashing on your system because it's trying to start some module of the SetUpAssistant that is incompatible with Leopard (as many are). If you instead use old copies of the "temp" and "users" folders (from the previous system), then ViaVoice doesn't have to go through the initial "registration" process; ViaVoice doesn't need the SetUpAssistant; and all is (more or less) fine.
Good luck!
BTW, to my knowledge, Dictate only runs on Intel Macs. It thus won't run on a G4 iBook, just as it won't run on my PowerBook G4.

Mapping problem with compressed key update record

Hi, could you please advise?
I'm getting the following problem:
About a week ago replicat abened with "Error in mapping" error. I found in discard file some record looking like:
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Where filed9 = @GETENV("GGHEADER", "COMMITTIMESTAM"), field10 = = @GETENV("GGHEADER", "COMMITTIMESTAM"), others are table fields mapped by USEDEFAULTS
So I got Mapping problem with compressed key update record at 2012-06-01 15:44
I guess I need to mention that extract failed in 5 minuts before it with: VAM function VAMRead returned unexpected result: error 600 - VAM Client Report <[CFileInfo::Read] Timeout expired after 10 retries with 1000 ms delay, waiting to read transaction log or backup files. To increase the number of retries, use SETENV (GGS_CacheRetryCount = n) in Extract parameter file. To control retry delay time, use SETENV (GGS_CacheRetryDelay = n). handle: 0000000000000398 ReadFile GetLastError:997 Wait GetLastError:997>.
I don't know if it has ther same source as data corruption, could you tell me if it is?
Well, I created new extract, starting 2012-06-01 15:30 to check if there was something with extract at the time, but got the same error.
If I run extract beging at 15:52 it starts and works.
But well, I got another one today. Data didn't look that bad, but yet one column came with null value:( And I'm using it as a key column, so I got Mapping problem with compressed key update record again:(
I'm replicating from SQL Server 2008 to Oracle 11g.
I'm actually using NOCOMPRESSUPDATES in Extract.
CDC is enabled for all tables replicated. The only thing is that it is enabled not by ADD TRANDATA command, but by SQL Server sys.sp_cdc_enable_table, does it matter?
Could you please advise why does it happen?

Well, the problem begins somewhere in extract or before extract, may be in transaction log, I don't know:(
Here are extract parameters:
EXTRACT ETCHECK
TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
SOURCEDB TEST, USERID **, PASSWORD *****
exttrail ./dirdat/ec
NOCOMPRESSUPDATES
NOCOMPRESSDELETES
TABLE tst.table1, COLS (field1, field2, field3, field4, field5, field6, field7, field8 );
TABLE tst.table2, COLS (field1, field2, field3, field4 );
Data pump:
EXTRACT DTCHECK
SOURCEDB TEST, USERID **, PASSWORD *****
RMTHOST ***, MGRPORT 7809
RMTTRAIL ./dirdat/dc
TABLE tst.table1;
TABLE tst.table2;
Replicat:
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
Rpt file for replicat:
Oracle GoldenGate Delivery for Oracle
Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
Windows x64 (optimized), Oracle 11g on Apr 22 2011 00:34:07
Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
Starting at 2012-06-05 12:49:38
Operating System Version:
Microsoft Windows Server 2008 R2 , on x64
Version 6.1 (Build 7601: Service Pack 1)
Process id: 2264
Description:
** Running with the following parameters **
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
CACHEMGR virtual memory values (may have been adjusted)
CACHEBUFFERSIZE: 64K
CACHESIZE: 512M
CACHEBUFFERSIZE (soft max): 4M
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 1G
CACHESIZEMAX (strict force to disk): 881M
Database Version:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Database Language and Character Set:
NLS_LANG = "AMERICAN_AMERICA.CL8MSWIN1251"
NLS_LANGUAGE = "AMERICAN"
NLS_TERRITORY = "AMERICA"
NLS_CHARACTERSET = "CL8MSWIN1251"
For further information on character set settings, please refer to user manual.
** Run Time Messages **
Opened trail file ./dirdat/dc000000 at 2012-06-05 12:49:39
2012-06-05 12:58:14 INFO OGG-01020 Processed extract process RESTART_ABEND record at seq 0, rba 925 (aborted 0 records).
MAP resolved (entry tst.table1):
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
2012-06-05 12:58:14 WARNING OGG-00869 No unique key is defined for table table1. All viable columns will be used to represent the key, but may not guarantee uniqueness. KEYCOLS may be used to define the key.
Using the following default columns with matching names:
field1=field1, field2=field2, field3=field3, field4=field4, field5=field5, field6=field6, field7=field7, field8=field8
Using the following key columns for target table R_019_000001.TCALCULATE: field3.
2012-06-05 12:58:14 WARNING OGG-01431 Aborted grouped transaction on 'tst.table1', Mapping error.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
2012-06-05 12:58:14 WARNING OGG-01151 Error mapping from tst.table1 to tst.table1.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
Source Context :
SourceModule : [er.main]
SourceID : [er/rep.c]
SourceFunction : [take_rep_err_action]
SourceLine : [16064]
ThreadBacktrace : [8] elements
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x143034) [0x00000001402192B4]]
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x11dd44) [0x00000001401F3FC4]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x000000014009F102]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B29CC]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B8887]]
: [C:\App\OGG\replicat.exe(releaseCProcessManagerInstance+0x25250) [0x000000014028F200]]
: [C:\Windows\system32\kernel32.dll(BaseThreadInitThunk+0xd) [0x000000007720652D]]
: [C:\Windows\SYSTEM32\ntdll.dll(RtlUserThreadStart+0x21) [0x000000007733C521]]
2012-06-05 12:58:14 ERROR OGG-01296 Error mapping from tst.table1 to tst.table1.
* ** Run Time Statistics ** *
Last record for the last committed transaction is the following:
Trail name : ./dirdat/dc000000
Hdr-Ind : E (x45) Partition : . (x04)
UndoFlag : . (x00) BeforeAfter: A (x41)
RecLength : 249 (x00f9) IO Time : 2012-06-01 15:48:56.285333
IOType : 115 (x73) OrigNode : 255 (xff)
TransInd : . (x03) FormatType : R (x52)
SyskeyLen : 0 (x00) Incomplete : . (x00)
AuditRBA : 44 AuditPos : 71176199289771
Continued : N (x00) RecCount : 1 (x01)
2012-06-01 15:48:56.285333 GGSKeyFieldComp Len 249 RBA 987
Name: DBO.TCALCULATE
Reading ./dirdat/dc000000, current RBA 987, 0 records
Report at 2012-06-05 12:58:14 (activity since 2012-06-05 12:58:14)
From Table tst.table1 to tst.table1:
# inserts: 0
# updates: 0
# deletes: 0
# discards: 1
Last log location read:
FILE: ./dirdat/dc000000
SEQNO: 0
RBA: 987
TIMESTAMP: 2012-06-01 15:48:56.285333
EOF: NO
READERR: 0
2012-06-05 12:58:14 ERROR OGG-01668 PROCESS ABENDING.
Discard file:
Oracle GoldenGate Delivery for Oracle process started, group RTCHECK discard file opened: 2012-06-05 12:49:39
Key column filed3 (0) is missing from update on table tst.table1
Missing 1 key columns in update for table tst.table1.
Current time: 2012-06-05 12:58:14
Discarded record from action ABEND on error 0
Aborting transaction on ./dirdat/dc beginning at seqno 0 rba 987
error at seqno 0 rba 987
Problem replicating tst.table1 to tst.table1
Mapping problem with compressed key update record (target format)...
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Process Abending : 2012-06-05 12:58:14

Mapping problem with compressed key update record (target format)...

Hi Guys,
Getting below error while replication from Source to target. Source table is having NOT NULL Column, but on target replicat process giving error about some NULL value ??
How to overcome this issue, any idea...
2011-08-04 10:35:04 INFO OGG-00995 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK starting.
2011-08-04 10:35:05 INFO OGG-00996 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK started.
2011-08-04 10:35:06 WARNING OGG-00869 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: OCI Error ORA-01407: cannot update ("INFRA"."CUST"."CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE" = :a4,"ORD_QTY" = :a5,"ORD_PRICE" = :a6,"CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.
2011-08-04 10:35:06 WARNING OGG-01004 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Aborted grouped transaction on 'INFRA.CUST', Database error 1407 (ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL).
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 *WARNING OGG-01154 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: SQL error 1407 mapping INFRA.CUST to INFRA.CUST OCI Error ORA-01407:* *cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE"=:a4,"ORD_QTY"*
*= :a5,"ORD_PRICE" = :a6,"SCRP_CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.*
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 ERROR OGG-01296 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Error mapping from INFRA.CUST to INFRA.CUST.
2011-08-04 10:35:06 ERROR OGG-01668 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: PROCESS ABENDING.
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
*Mapping problem with compressed key update record (target format)...*
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-
04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
Mapping problem with compressed key update record (target format)...
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Any inputs / help would be appreciated.
Regards,
Manish

The SCRP_CODE column has a NOT NULL constraint. The ORA-01407 error is telling you that you cannot update or set a value for this column to null because of the constraint. This has absolutely nothing to do with an index. You can use a marker/sentinel value in lieu of using NULL. For a numeric field, where everything is positive, a negative value (-1) can be decoded as meaning null. For a character field, a code such as NA can represent NULL.
This also has nothing to do (directly) with GoldenGate failing because of this error. The underlying SQL statement will fail everywhere, regardless of the tool or application. It is not a case of failing only in GoldenGate.

Mapping problem - Shaded areas in the wrong place

Hey experts,
I`ve already contacted you on this issue a few days ago. I created a query, which executes a few key figures mapped to the postalcode.
I tried to let me display this query on the web, using the WAD. The shapefiles were uploaded correctly, for the contours of the country and the postalcode areas are displayed accurately.
At the first sight, I thought a performance problem could be the challenge. But I did not find any information on that. On my last post, i received one answer, that I had to adjust the sort order. But that did not bring any results either!
At the moment, it looks more like a mapping problem in the dBase File to me. How can a proper mapping be achieved? I tried to just add a SAPBWKEY column, like it is proposed here: http://help.sap.com/saphelp_nw04/helpdata/en/3b/7c92ec1bed374ee0000800091c1b0e/content.htm.
An extract of my dBase-File schematically looks like this:
0country, 0Postalcod, SAPBWKEY
DE 48900 DE/48900 (for it is a composite attribute)
The mapping seems to work in a rather random way, because the shaded areas are at least displayed somewhere on the map, but not where they supposed to be, e. g. one district of south Germany in the far north and so on.
Did you have any similar issues in the past or any tips for a solution?
Thanks&regards
Marcus

Sorry, I guess this is just a bug in some programs including firefox:
https://bugzilla.mozilla.org/show_bug.cgi?id=314279

Mapping Problem ORDERS Idoc to Edifact

Hi,
I have a mapping problem with the IDOC ORDERS:
I get the IDOC with several E1EDP01. Each E1EDP01 has several E1EDPT1, where i want only the first one (which I get over the TDID value). Each E1EDPT1 has min. 1 E1EDPT2.
Now I have to map each field TDLINE from first two E1EDPT2 of the first E1EDPT1 to the Edifact fields /LIST/S_UNB/S_UNH/G_SSG25/S_LIN/S_IMD[1]/C_C273/D_7008 (from the first E1EDPT2) and, if a second E1EDPT2 exists in /LIST/S_UNB/S_UNH/G_SSG25/S_LIN/S_IMD[1]/C_C273/D_7008_2.
I use following UDF:
//a = TDLINE
//b = Number of entry in the List
int pos =Integer.parseInt(b[0]);
if ( pos < a.length )
result.addValue(a[pos]);
else
result.addValue(ResultList.SUPPRESS);
Unfortunatly, I think becaus of the context problems (not every E1EDPT1 has two E1EDPT2), it's not working. Could somebody help me with this problem?
Thanks in advance
Dominic

Dear Dominic ,
I had same problem when I was trying to do the same thing for FTX segment.
Your UDF is fine but you don't need else condition.
//a = TDLINE
//b = Number of entry in the List
int pos =Integer.parseInt(b[0]);
if ( pos < a.length )
result.addValue(a[pos]);
for C_C273 assigned contant value and
D_7008 assigned TDLINE but change the context to E1EDPT1
and for D_7008_2
TDLINE(context to E1EDPT1 )
====>UDF====>D_7008_2
Contant(=1)
It should work becasue my map is working fine. If not let me know error message.
Thanks
Shubhankar

Mapping problem:from E1EDK14-ORGID to PORDCR102-PUR_GROUP

Mapping problem:from E1EDK14-ORGID to PORDCR102-PUR_GROUP
E1EDK14 occurs 4 times in the source sys:
1   E1EDK14-QUALF = '014'
     E1EDK14-ORGID = 'YP01'      <= purchase organization
2   E1EDK14-QUALF = '009'
     E1EDK14-ORGID = '001'      <= purchase group
3   E1EDK14-QUALF = '013'
     E1EDK14-ORGID = 'NB'      <= document type
4   E1EDK14-QUALF = '011'
     E1EDK14-ORGID = 'C999'      <= company code
I always want to copy "E1EDK14-ORGID = '001'" to PORDCR102-PUR_GROUP.
I have a solution which works but not perfect:
E1EDK14-ORGID=>copyvalue[1]=>PORDCR102-PUR_GROUP
I want to have the perfect mapping as follow:
IF E1EDK14-QUALF = '009'.
E1EDK14-ORGID = '001' => PORDCR102-PUR_GROUP
ENDIF.
I did it in the data flow editor as follow:
/PORDCR102/IDOC/E1PORDCR1/E1BPMEPOHEADER/PUR_GROUP=
ifWithoutElse([keepss=false]stringEquals
(removeContexts(/ORDERS05/IDOC/E1EDK14/QUALF=),
const([value=009])), /ORDERS05/IDOC/E1EDK14/ORGID=)
But the result in the target sys is always 'YP0'(The first E1EDK14-ORGID)
How to solve this problem?
Thanks
ming yu

Hi,
Try like this.
E1EDK14-QUALF   --------
Constant(009) ----------------   EqualsS ---------------
                                                             And(Boolean Function)     ------ IfWithoutElse -- PORDCR102-PUR_GROUP
E1EDK14-ORGID -------                                                      E1EDK14-ORGID ----------------
Constant(001) --------------   EqualsS ------------------
Regards,
P.Venkat

Weird dreamweaver keyboard mapping problem

weird dreamweaver keyboard mapping problem:
Hope this solution helps someone out. If you have q's, ask
and I will try to help.
I was having a weird problem in dreamweaver... Whenever I was
in code view and typed "shift+i" to make a capital "I", instead it
would paste from the clipboard.
I finally figured out what was happening. I compared the
menu.xml in my app support folder in the user library to the
original menu.xml file that was in the application folder. I went
through until I came across the diff:
menu.xml in my library/app support folder:

<shortcut key="Cmd+Ins" name="Copy2" platform=""
command="if (dw.canClipCopy()) { dw.clipCopy() }"
domRequired="FALSE" id="DWShortcuts_HTMLSource_Copy2" />
<shortcut key="Shift+Ins" name="Paste2" platform=""
command="if (dw.canClipPaste()) { dw.clipPaste() }"
domRequired="FALSE" id="DWShortcuts_HTMLSource_Paste2" />
<shortcut key="Shift+Del" name="Cut2" platform=""
command="if (dw.canClipCut()) { dw.clipCut() }" domRequired="FALSE"
id="DWShortcuts_HTMLSource_Cut2" />
orig menu.xml file:

<shortcut key="Cmd+Ins" name="Copy2" platform=""
command="if (dw.canClipCopy()) { dw.clipCopy() }"
domRequired="FALSE" id="DWShortcuts_HTMLSource_Copy2" />
<shortcut key="Shift+Ins" name="Paste2" platform=""
command="if (dw.canClipPaste()) { dw.clipPaste() }"
domRequired="FALSE" id="DWShortcuts_HTMLSource_Paste2" />
<shortcut key="Shift+Del" name="Cut2" platform=""
command="if (dw.canClipCut()) { dw.clipCut() }" domRequired="FALSE"
id="DWShortcuts_HTMLSource_Cut2" />
There was a diff in the "platform=" tags. The orig stated
[platform="win"], my config stated [platform=""] (nothing in
between the ""'s). So, I reset the platform tag to be
[platform="win"] in my settings and then relaunched dreamweaver. It
fixed the problem.
Not sure how this occurred, but it works now.

Mapping problem on CSV to RFC scenerio

Similar Messages

Maybe you are looking for