MAPPING PROBLEM - SIMPLE vs. ADVANCED FUNCTIONS

Dear all,
I got an IDOC-EDIFACT Mapping, which deals a lot with container variables to prestructure the complex and nested target structure, provide counter and some actual/"you are here"-variables for the reason, that the segments of the target structure are mostly build from the same type, but different filled, depending on what they represent.
Filling this target segments I need simple functions, which provide my "your are in a ABC segment"-variables to orientate and then I need most of the time a advanced function, which searches e.g. positions in the source structure (imagine POSNR) and get depending "You are here..."-variable relevant data to map. This is where I get problems. I don't get it totally, yet...but it seems like, how often my field mapping (The different connected functions leading to target field) for one field is processed, depends on the number of the target field itself, as long as you use simple functions (make sense), when I use advanced functions (soesn't matter ,in which step in my field mapping), the field mapping seems to run only once (still makes sense, because you queue the source field entries), but how does it work if I have to use both function types.
Can some one please help?
Thank you in advance...
Daniel

Thanks for your answer,
I am into contextes and your tips would normally work and make me go, but... my problem ist a little more complicate. Let's see I try to explain it in another way.
If you map a constant or a simple function to a target element - you don't care for the occurency of your source element or simple functions, right? This is because, independent from a source element (with the correct occurency matching the target element) XI takes care that your constant is repeated often enough to build so many target elements as needed.
If you use advanced Functions, its little more complicate, then you have allready to provide a queue, which tells the advanced function - how many times to run and how how many result entries to create, 'cause these must match with the number of occurency of your target element (in simple words: you control the number of runs, that your single field mapping is processed).
Question: What happens if I use simple Functions (Which should be called every time and context, the target field should be build - in a single context) and advanced function(which should identify, depending on the result of the actual simple function call values from queued source fields) in a single element-mapping?
What controlls the number of runs? Me or XI? How to provide the right number of entries from my advanced function without knowing before, how many target elements must be build and without a direct dependency from source elements?
Thanks for thinking about this...

Similar Messages

Diff betwen Simple and Advanced function

Hi,
What is the the diff betwen Simple and Advanced user defined function in message mapping ?
Thanks,
Ram

Hi,
Simple function : Simple functions without paramters work like constants and produce the target element exactly once for each context.
if I use simple Functions (Which should be called every time and context, the target field should be build - in a single context) and advanced function(which should identify, depending on the result of the actual simple function call values from queued source fields) in a single element
Advance function : Advanced functions with paramters seem to produce the target element for each context
If you use advanced Functions, its little more complicate, then you have allready to provide a queue, which tells the advanced function - how many times to run and how how many result entries to create, 'cause these must match with the number of occurency of your target element (in simple words: you control the number of runs, that your single field mapping is processed).
Regards
Agasthuri Doss

Unable to Find out Advanced Function in Mapping

Hi Experts,
We Installed PI 7.0.
Here In IR --> Mapping
If I Want to Create Any Adv User Defined Function Means , that option is not there.
Only i have One Click on that Button.
I don't have the Other Option of Having the ADV Functions to Create.
Please Let Me Know
Regards
Khanna

Hi
go thru the following
Activities
       1.      To create a new user-defined function, in the data-flow editor, choose Create New Function (This graphic is explained in the accompanying text), which is located on the lower left-hand side of the screen. In the menu, choose Simple Function or <b>Advanced Function.</b>
       2.      In the window that appears, specify the attributes of the new function:
Name
Technical name of the function. The name is displayed in the function chooser and on the data-flow object.
Description
Description of how the function is used.
Cache
Function type (see above)
Argument Count
In this table, you specify the number of input values the function can process, and name them. All functions are of type String.
       3.      In the window that appears, you can create Java source code:
                            a.      You can import Java packages to your methods from the Imports input field, by specifying them separated by a comma or semi-colon:
You do not need to import the packages java.lang., java.util., java.io., and java.lang.reflect. since all message mappings require these packages and therefore import them. You should be able to access standard JDK and J2EE packages of the SAP Web Application Server by simply specifying the package under Import. In other words, you do not have to import it as an archive into the Integration Repository. You can also access classes of the SAP XML Toolkit, the SAP Java Connector, and the SAP Logging Service (see also: Runtime Environment (Java-Mappings)).
In addition to the standard packages, you can also specify Java packages that you have imported as archives and that are located in the same, or in an underlying software component version as the message mapping.
                            b.      Create your Java source text in the editor window or copy source text from another editor.
       4.      Confirm with Save and Close.
       5.      User-defined functions are limited to the message mapping in which you created the function. To save the new function, save the message mapping.
       6.      To test the function, use the test environment.
The new function is now visible in the User-Defined function category. When you select this category, a corresponding button is displayed in the function chooser pushbutton bar. To edit, delete, or add the function to the data-flow editor, choose the arrow next to the button and select from the list box displayed.
regards
krishna

My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~

My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~

Force close the App Store app and reset the iPad. No data will be lost when you reset the device.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Port Mapping Problem with AEX

I have a new Airport Extreme and a problem that did not exist with the Airport. I connect a Toshiba network camera to an Airport Express, set as a WDS remote, with the netcam connected to the wired ethernet port of the Express. I can see the netcam, which also functions as a web server, on the internal 10.x.x.x address, and have reserved a discrete 10.x.x.x address via the MAC/DHCP reservation function of the Extreme. Just like the older Airport which did this without a hiccup, I should be able to map a port (e.g. 1200) on the public IP to port 80 of the internal 10.x.x.x address, then access the netcam on the internal network from any browser (http://67.x.x.x:1200). My cable modem is just that: no router involved other than the Airport Extreme. I'm using the latest Extreme and Express firmware, and am either missing something with the new Leopard firewall, overlooking something else, or dealing with a product flaw. Any help is appreciated and Happy Holidays.

I have forwarded the port (have tried several different ports actually) in what I think it the correct way: using the Airport Utility, connected to the Airport Extreme, and, under advanced options, selected port mapping, entered the public TCP port of 1200, then the private 10.x.x.x IP address of the netcam (which I can access from the internal network with no problem), coupled with the private TCP port of 80. I then attempt to access the netcam from the Internet by entering http://my cable modem IP address:1200 (or another port to which I've attempted to map). This method worked for two years with the Airport, but, with the Extreme and Leopard (simultaneous transition), I'm stumped. After reading other about other port mapping problems, I reserved an IP address for the netcam based on its MAC with no positive results. I also set the firewall through the Security icon in System Preferences to allow all incoming connections. Thanks for taking the time to respond.

Advanced functions,UDF's and node function

Dear all,
Can you kindly let me know about Advanced functions,UDF's and node function.Differences and Uses.
Also Let me know about the advantages,Disadvantages of Graphical,XSLT,Java,ABAP and ABAP XSLT mappings.
Thanks,
Srini

Hi,
The term Mapping means:
1. The transformation process, and/or
2. The transformation rules.
Independently from XI, you can distinguish two different mappings
Structure mappings transform entire message structures.
Value mappings transform values within messages.
Mapping Programs to Map Messages :
Message Mapping
Designed by using the graphical mapping editor of Integration Builder
Result: Generated Java Code.
Imported Archives
Import externally defined mapping programs into repository
Java mapping:
Implemented by using a specific interface
XSLT mapping:
Runtime supports XSLT processor
Java methods can be called from within a Style Sheet
ABAP Mapping
You can execute mapping programs in a sequence
The exchange infrastructure supports three types of mappings:
Message mappings that can be designed using a graphical mapping editor in the Integration Builder. As a result, Java code is generated from the graphical representation that is compiled before it can be executed on the integration server.
You can implement your own Java mapping by implementing a specific interface of the mapping API.
You can implement an XSLT mapping
For the latter two, there is no tool support in XI. It is expected that they are developed using external development tools. To make them available for the integration server, they have to be imported into the integration repository as JAR
files before (JAR: Java Archives).
Developers can even decide to combine the different mapping technologies:
Message mappings, XSLT mappings and Java mappings can be combined in a sequence by means of an interface mapping.
XSLT mappings can use java functions
Message mappings support user-defined functions that can use imported java packages of the same namespace.
In SAP XI, there is 3 types of mappings. Namely
XSLT Mapping
Java Mapping
ABAP Mapping
Here is the details of each mapping.
XSLT Mappings (ABAP Engine)
Interface descriptions are in the form of XML documents. XSL Transformation (XSLT) is a member of the XML family of languages. It describes how an XML structure is transformed into another XML structure.
Customers can develop an XSLT mapping by using the Transformation Editor of the ABAP Workbench. Such XSLT mappings are executed at runtime on the ABAP Engine of the Integration Server.
To simplify matters, this section refers to XSLT mappings of the ABAP Engine as transformation programs to differentiate them from XSLT mappings from imported archives that are executed on the J2EE Engine.
Features
XPath and <xsl:include>
You can define mappings using XSLT together with XPath. XPath is also a specification of the XML family. Using XPath you can address any node in an XML document. XSLT implements XPath expressions to select substructures of an XML document. Using templates in XSLT you can define the mapping rules for the selected substructures.
You can use the XSLT tags <xsl:include> and <xsl:import> to include predefined templates for substructures in a complete mapping definition. In this way, you can reuse mappings for data types.
Java Mapping
You can implement mapping programs in Java. To process XML documents, use Java API for XML Processing (JAXP), for example. The JAXP supports the Document Object Model (DOM) and the Simple API for XML (SAX). This gives you great flexibility for mapping definitions with Java.
Implementation Considerations
Java mapping programs are not permitted to be stateful. You are therefore not permitted to perform actions such as writing data to a database table during a Java mapping. The Integration Server cannot track such side effects. Therefore, if an attempt is made to resend a message that has not been received by the receiver, the data may inadvertently be written to the database twice in a Java mapping.
If you use JRE classes in your Java mapping programs then the same program restrictions apply as for Enterprise Java Beans (EJBs). For a detailed description of these restrictions, see the relevant EJB specification. It is important that you also refer to the information under Scope of Functions in Runtime Environment (Java Mappings).
The runtime environment for Java mappings has an mapping API. To use Java mapping, you must define a Java class that implements the Java interface com.sap.aii.mapping.api.StreamTransformation. This interface has two methods:
● public void execute(java.io.InputStream in, java.io.OutputStream out)
At runtime, the Integration Engine calls this method to execute a mapping. This method contains an input stream for the source document and an output stream for the target document as parameters. These streams are usually XML documents. You can import the substructures to be converted from the input stream and output the converted target document in the output stream.
● public void setParameter(java.util.Map param)
The Integration Engine transfers parameters to the mapping program with this method. It evaluates these parameters at runtime in the method execute(). This enables you to control the process flow of the mapping.
The transferred object that implements the Java interface java.util.Map contains seven key/value pairs as parameters. These correspond to corresponding fields in the message header. Apart from the MAPPING_TRACE constant, the value objects are of type java.lang.String. The key objects are defined in the class com.sap.aii.mapping.api.StreamTransformationConstants
ABAP Mappings
ABAP mappings are mapping programs in ABAP objects that customers can implement using the ABAP Workbench.
Features
An ABAP mapping comprises an ABAP class that implements the interface IF_MAPPING in the package SAI_MAPPING.
Exception: CX_MAPPING_FAULT
Applications can decide themselves in the method EXECUTE how to import and change the source XML document. If you want to use the XSLT processor of SAP Web AS, you can use the ABAP Workbench to develop a stylesheet directly (see XSLT Mappings (ABAP Engine)) rather than using ABAP mappings.
Runtime Constants
In ABAP mapping you can read access message header fields. To do this, an object of type IF_MAPPING_PARAM is transferred to the EXECUTE method. The interface has constants for the names of the available parameters and a method GET, which returns the respective value for the parameter name. The constants are the same as in Java mappings, although the constant MAPPING_TRACE does not exist for ABAP mappings. Instead, the trace object is transferred directly using the parameter TRACE of the method IF_MAPPING~EXECUTE
Example: Accessing a Runtime Constant
Method IF_MAPPING~EXECUTE.
Get mapping constant SENDER_SERVICE
data: l_sender_service type string.
l_sender_service = param->get( IF_MAPPING_PARAM=>SENDER_SERVICE ).
ENDMETHOD.
These r excellent websites which contain PPT & PDF documents on mapping:
Excellent PDF Document on Mapping
http://help.sap.com/bp_bpmv130/Documentation/Operation/MappingXI30.pdf
Mapping Development with the ABAP Workbench
http://help.sap.com/saphelp_nw04/helpdata/en/10/5abb2d9df242f6a62e22e027a6c382/content.htm
ABAP Mappings
http://help.sap.com/saphelp_nw04/helpdata/en/ba/e18b1a0fc14f1faf884ae50cece51b/content.htm
how to create a flat file out of an IDoc-XML by means of an ABAP mapping program and the J2EE File Adapter.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
How to Use ABAP Mapping in XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
Hope this will help you, and don't forget to close this thread.
Regards
Aashish Sinha
PS : reward points if helpful

ESB problem when use merge function in master/detail relationship

I have some problem with the merge function in database adapter.
details:
I have 2 tables in master/detail relationship, both have GUID column as a primary key (GUID generated by ESB).
'car_group' table
pk : guid
unique : group_no, datadate, datatime
===============================
guid, group_no, datadate, datatime, group_detail
===============================
1, 1, 01/01/2008, 09:00, groupdetail01
2, 1, 01/01/2008, 10:00, groupdetail02
'car_group_detail' table
pk : guid
fk : car_group_guid link to car_group.guid
==================
guid, car_group_guid, detail
==================
1, 1, detail01
2, 1, detail02
3, 2, detail03
4, 2, detail04
I used a file adapter as a input, here is an example text file
M, 1, 01/01/2008, 09:00, groupdetail01
D, detail01
D, detail02
M, 1, 01/01/2008, 10:00, groupdetail02
D, detail03
D, detail04
Because I used merge function so I need to specify the columns that will be a condition for the insert/update,
but I have generate GUID as a primary key in the tables, I can't used it, so in toplink I map my unique key as a primary key.
The insert operation work fine but when update is required (for example, try to change 'group_detail' column of the master table in text file),
an SQLException thrown, the log file shown the adapter try to update the GUID column of master table but the constraint not allowed.
And yes, cause of GUID generate everytime so ESB try to update this column also, but I don't want to do like that, I need something
like when update operation required, just ignored the GUID column.
I try to mark read-only to the GUID column in Toplink mapping file but still have the same problem, it still generate UPDATE statement
with the GUID column, and also I try to let the database trigger to generate GUID instead of ESB function, but it not works in master/detail
relationship (I think the Toplink manage the relationship, is it right ?)
Please advise, thanks for advance.

somebody please help, thanks !!!

Mapping problem with Wireless Keyboard and Japanese iPhone

Hi everyone:
This seems to be a slightly obscure question -- at least, I can't find a ready answer for it with the search terms I've tried, possibly because most people don't use this particular accessory with the iPhone.
I have an iPhone 4 that I bought from and use on Softbank, the carrier in Japan, where I live. While visiting the United States recently, I bought an Apple Wireless Keyboard from an Apple retailer. I wanted to carry it with me for use with my iPhone, so I would reliably have a convenient way to access the Internet without being confined to the touchscreen keyboard. (I live in a rural area where WiFi spots are uncommon, but my iPhone's access to Softbank's data network is fairly good and consistent.)
However, to my frustration, I can't use the keyboard due to a mapping problem. The Bluetooth connection is fine -- the iPhone can discover the keyboard. However, the mapping is off: typing "Q" gets me "A," typing "Z" gets me "W", numbers and punctuation are off, etc. The key point: This is NOT a problem with the International Keyboard settings (under the Settings -> General -> Keyboard -> International Keyboards menu). I have the Keyboard setting set to QWERTY, which is the layout of the Apple keyboard; I have tried all the other possibilities, just in case. None of them work. Setting the Keyboard setting to QWERTY does not make the external QWERTY keyboard map correctly.
The rather ironic addendum is this: While on a recent trip to Tokyo, I visited the Apple store in Shibuya and, after concluding the main business of my visit (discussing my MacBook's battery problems with an English-speaking staffer), I took out my iPhone and keyboard and asked him about my mapping problem. He started with the Keyboard menu, tried the same things I had tried, realized they weren't working, and puzzled over the problem for a while. Then he did this: He hit a key combination (I believe) that brought up a menu on the iPhone's screen. "Ah, there's your problem," he said, and selected a new setting. The problem was instantly fixed.
To my chagrin, however, I neglected to write down what "Ken" had done to fix the problem. Argh... I was looking at the iPhone upside-down; I'd already taken up more than half an hour; people were waiting, and I guess, being used to living in the countryside now, that I'm not used to Shibuya crowds any more. Anyway, I didn't take careful notes or ask him to walk me through it, and now I cannot recall or repeat what he did. And I still can't use my keyboard!
Any ideas or advice, anyone? How did "Ken" fix my problem, and how can I repeat it? Much, much appreciated, in advance.

THAT'S IT. Sir, you have solved my problem. Thank you!!
And I feel a little silly; this will doubtless seem to an expert as if it should have been obvious all along. But isn't that always the way in hindsight?
Here's what happened: The key combination I was trying to remember was "Apple/command + space on the hardware keyboard," as you just said above. The "menu" it brings up is, apparently, a list of keyboards. I take it that this list is the same as the list of the "virtual" keyboards on the iPhone? I have never had more than one external keyboard -- the Apple Wireless -- but I do have several keyboards active virtually, as the iPhone in Japan seems to come with both the "Nihongo Ten-key" and the "Nihongo Romaji" keyboards active, and I added several other languages as well.
When I hit "Apple/command + space," this list comes up on the iPhone's touchscreen. Highlighted and checked at the top is "English," just as if it had been selected all along. But nonetheless, when I first turn on and pair my keyboard with the iPhone, I need to perform this key-combination action, as if to "reselect" English, and then the keyboard promptly starts working properly as QWERTY. I can only assume that one of the others had been default-selected before -- presumably one of the Nihongo ones? -- and that this was causing the interference.
Thank you again! You have made me and my wireless keyboard very happy.

Problems with ViaVoice under Leopard, especially key mapping problems

ViaVoice's behavior has changed considerably under Leopard. First I will discuss the key mapping problem, since I'm eagerly looking for an answer to this problem. At the end of this post, I will voice some of the other problems I've experienced for those who may be interested. The key mapping problem may be specific to the fact that I use a foreign keyboard with a US version of ViaVoice.
INTRO:
I have used ViaVoice on my Mac for years, more or less without problems (ViaVoice's bugginess is notorious).
Those who know ViaVoice will know that one has two general options for dictation. One can dictate into ViaVoice's so-called SpeakPad, which allows special formatting, editing and dictation error correction within the dictated text, or one can dictate into "external" software such as Microsoft Word, in which case ViaVoice just sends a string of characters to that software. SpeakPad appears to make strong use of the operating system's built-in functionality for character formatting, document formatting, etc.
*MY PROBLEM*
I have a German keyboard on my PowerBook, yet dictate in US English. When I dictated into SpeakPad under Tiger, all characters appeared correctly. However, when I dictated into Microsoft Word using Tiger, I had to switch the keyboard mapping from German to US to get all characters (that means including the characters that are located at different positions on a German keyboard than they are on a US keyboard such as y, z, apostrophes and parentheses) to appear correctly.
Under Leopard, things have changed. Now it doesn't matter whether I dictate into SpeakPad or Word; the results are the same and many characters do not appear correctly.
If set to a German keyboard, y and z appear as expected. To name a few irregularities:
"(" appears as ")"
")" appears as "="
apostrophes appear as "#" and
";" appears as ","
If set to a US keyboard, y and z are interchanged. "(" and ")" appear as expected. Apostrophes appear as "\" and ";" appears as ","
By comparison, if typed (as opposed to dictated, as in the examples above) "correctly" (i.e. based on the letters printed on the keyboard) on a German keyboard set to imitate a US keyboard:
y and z are interchanged
apostrophes appear as "|"
"(" appears as "*"
")" appears as "(" and
";" appears as the symbol for "less than"
Since I don't have a US keyboard, I can't say how it would behave if set to imitate a German keyboard, i.e. if there's a correlation to the results I get when I dictate.
Since I was previously able to dictate correctly into SpeakPad by setting the keyboard to "German" and into Word by setting the keyboard to "US," I presume that this is a problem in Leopard, not ViaVoice.
*OTHER PROBLEMS WITH VIAVOICE UNDER LEOPARD*
In addition to the aforementioned key mapping problems (that may be specific to those of us with foreign keyboards), ViaVoice appears to have lost considerable functionality in Leopard. I cannot access SpeakPad's Preferences and the correction window. Moreover, the traffic-light like window buttons have disappeared from the VoiceCenter (although they work if you click where they should be). SetupAssistent appears to function.
I've written to Nuance about these problems, but have little hope that they will invest the time in producing a patch since they haven't released any updates since 2003.

Thrums1,
I've never had to "register" ViaVoice after updating the system. I thus suspect you haven't fully followed my above, three-step advice (particularly step 3).
1) Reinstall ViaVoice from CD.
2) Update to the latest version (using the patch downloadable from Nuance's website).
3) Replace the “temp” and “users” folders (in the "ViaVoice" folder at the upper level of your home directory) by a previous copy thereof. When I say previous copy, I mean a copy from when ViaVoice was still working properly, e.g. a copy from when it was running under Tiger.
As I said, I've gotten ViaVoice to survive several system updates by following the above steps. To my knowledge, the last step is critical since it saves you from having to reconfigure ViaVoice under the new operating system (in this case Leopard). I suspect that ViaVoice is crashing on your system because it's trying to start some module of the SetUpAssistant that is incompatible with Leopard (as many are). If you instead use old copies of the "temp" and "users" folders (from the previous system), then ViaVoice doesn't have to go through the initial "registration" process; ViaVoice doesn't need the SetUpAssistant; and all is (more or less) fine.
Good luck!
BTW, to my knowledge, Dictate only runs on Intel Macs. It thus won't run on a G4 iBook, just as it won't run on my PowerBook G4.

Mapping problem with compressed key update record

Hi, could you please advise?
I'm getting the following problem:
About a week ago replicat abened with "Error in mapping" error. I found in discard file some record looking like:
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Where filed9 = @GETENV("GGHEADER", "COMMITTIMESTAM"), field10 = = @GETENV("GGHEADER", "COMMITTIMESTAM"), others are table fields mapped by USEDEFAULTS
So I got Mapping problem with compressed key update record at 2012-06-01 15:44
I guess I need to mention that extract failed in 5 minuts before it with: VAM function VAMRead returned unexpected result: error 600 - VAM Client Report <[CFileInfo::Read] Timeout expired after 10 retries with 1000 ms delay, waiting to read transaction log or backup files. To increase the number of retries, use SETENV (GGS_CacheRetryCount = n) in Extract parameter file. To control retry delay time, use SETENV (GGS_CacheRetryDelay = n). handle: 0000000000000398 ReadFile GetLastError:997 Wait GetLastError:997>.
I don't know if it has ther same source as data corruption, could you tell me if it is?
Well, I created new extract, starting 2012-06-01 15:30 to check if there was something with extract at the time, but got the same error.
If I run extract beging at 15:52 it starts and works.
But well, I got another one today. Data didn't look that bad, but yet one column came with null value:( And I'm using it as a key column, so I got Mapping problem with compressed key update record again:(
I'm replicating from SQL Server 2008 to Oracle 11g.
I'm actually using NOCOMPRESSUPDATES in Extract.
CDC is enabled for all tables replicated. The only thing is that it is enabled not by ADD TRANDATA command, but by SQL Server sys.sp_cdc_enable_table, does it matter?
Could you please advise why does it happen?

Well, the problem begins somewhere in extract or before extract, may be in transaction log, I don't know:(
Here are extract parameters:
EXTRACT ETCHECK
TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
SOURCEDB TEST, USERID **, PASSWORD *****
exttrail ./dirdat/ec
NOCOMPRESSUPDATES
NOCOMPRESSDELETES
TABLE tst.table1, COLS (field1, field2, field3, field4, field5, field6, field7, field8 );
TABLE tst.table2, COLS (field1, field2, field3, field4 );
Data pump:
EXTRACT DTCHECK
SOURCEDB TEST, USERID **, PASSWORD *****
RMTHOST ***, MGRPORT 7809
RMTTRAIL ./dirdat/dc
TABLE tst.table1;
TABLE tst.table2;
Replicat:
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
Rpt file for replicat:
Oracle GoldenGate Delivery for Oracle
Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
Windows x64 (optimized), Oracle 11g on Apr 22 2011 00:34:07
Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
Starting at 2012-06-05 12:49:38
Operating System Version:
Microsoft Windows Server 2008 R2 , on x64
Version 6.1 (Build 7601: Service Pack 1)
Process id: 2264
Description:
** Running with the following parameters **
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
CACHEMGR virtual memory values (may have been adjusted)
CACHEBUFFERSIZE: 64K
CACHESIZE: 512M
CACHEBUFFERSIZE (soft max): 4M
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 1G
CACHESIZEMAX (strict force to disk): 881M
Database Version:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Database Language and Character Set:
NLS_LANG = "AMERICAN_AMERICA.CL8MSWIN1251"
NLS_LANGUAGE = "AMERICAN"
NLS_TERRITORY = "AMERICA"
NLS_CHARACTERSET = "CL8MSWIN1251"
For further information on character set settings, please refer to user manual.
** Run Time Messages **
Opened trail file ./dirdat/dc000000 at 2012-06-05 12:49:39
2012-06-05 12:58:14 INFO OGG-01020 Processed extract process RESTART_ABEND record at seq 0, rba 925 (aborted 0 records).
MAP resolved (entry tst.table1):
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
2012-06-05 12:58:14 WARNING OGG-00869 No unique key is defined for table table1. All viable columns will be used to represent the key, but may not guarantee uniqueness. KEYCOLS may be used to define the key.
Using the following default columns with matching names:
field1=field1, field2=field2, field3=field3, field4=field4, field5=field5, field6=field6, field7=field7, field8=field8
Using the following key columns for target table R_019_000001.TCALCULATE: field3.
2012-06-05 12:58:14 WARNING OGG-01431 Aborted grouped transaction on 'tst.table1', Mapping error.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
2012-06-05 12:58:14 WARNING OGG-01151 Error mapping from tst.table1 to tst.table1.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
Source Context :
SourceModule : [er.main]
SourceID : [er/rep.c]
SourceFunction : [take_rep_err_action]
SourceLine : [16064]
ThreadBacktrace : [8] elements
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x143034) [0x00000001402192B4]]
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x11dd44) [0x00000001401F3FC4]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x000000014009F102]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B29CC]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B8887]]
: [C:\App\OGG\replicat.exe(releaseCProcessManagerInstance+0x25250) [0x000000014028F200]]
: [C:\Windows\system32\kernel32.dll(BaseThreadInitThunk+0xd) [0x000000007720652D]]
: [C:\Windows\SYSTEM32\ntdll.dll(RtlUserThreadStart+0x21) [0x000000007733C521]]
2012-06-05 12:58:14 ERROR OGG-01296 Error mapping from tst.table1 to tst.table1.
* ** Run Time Statistics ** *
Last record for the last committed transaction is the following:
Trail name : ./dirdat/dc000000
Hdr-Ind : E (x45) Partition : . (x04)
UndoFlag : . (x00) BeforeAfter: A (x41)
RecLength : 249 (x00f9) IO Time : 2012-06-01 15:48:56.285333
IOType : 115 (x73) OrigNode : 255 (xff)
TransInd : . (x03) FormatType : R (x52)
SyskeyLen : 0 (x00) Incomplete : . (x00)
AuditRBA : 44 AuditPos : 71176199289771
Continued : N (x00) RecCount : 1 (x01)
2012-06-01 15:48:56.285333 GGSKeyFieldComp Len 249 RBA 987
Name: DBO.TCALCULATE
Reading ./dirdat/dc000000, current RBA 987, 0 records
Report at 2012-06-05 12:58:14 (activity since 2012-06-05 12:58:14)
From Table tst.table1 to tst.table1:
# inserts: 0
# updates: 0
# deletes: 0
# discards: 1
Last log location read:
FILE: ./dirdat/dc000000
SEQNO: 0
RBA: 987
TIMESTAMP: 2012-06-01 15:48:56.285333
EOF: NO
READERR: 0
2012-06-05 12:58:14 ERROR OGG-01668 PROCESS ABENDING.
Discard file:
Oracle GoldenGate Delivery for Oracle process started, group RTCHECK discard file opened: 2012-06-05 12:49:39
Key column filed3 (0) is missing from update on table tst.table1
Missing 1 key columns in update for table tst.table1.
Current time: 2012-06-05 12:58:14
Discarded record from action ABEND on error 0
Aborting transaction on ./dirdat/dc beginning at seqno 0 rba 987
error at seqno 0 rba 987
Problem replicating tst.table1 to tst.table1
Mapping problem with compressed key update record (target format)...
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Process Abending : 2012-06-05 12:58:14

Error in simple user defined function

Hi all,
I have seen one simple user defined function on scenario. Now it is working fine. Same code I have used another place. But it is giving some errors
D:/usr/sap/C08/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapc6fa0c70297511dbaf7e00c09f4504e7/source/com/sap/xi/tf/_ST_MM_.java:3: package javax.mail.internet does not exist
import com.sap.aii.mappingtool.tf3.;import com.sap.aii.mappingtool.tf3.rt.;import java.util.;import java.io.; import java.lang.reflect.;import javax.mail.internet.;import javax.mail.;import java.util.;import java.util.Date;import javax.activation.;import java.lang.reflect.;import javax.mail.event.*;
Like that it has shown 13 errors. I have given the package names in imports field what previous function has.

Hi,
Please see this from SAP help
<i>a. You can import Java packages to your methods from the Imports input field, by specifying them separated by a comma or semi-colon:
You do not need to import the packages java.lang., java.util., java.io., and java.lang.reflect. since all message mappings require these packages and therefore import them. You should be able to access standard JDK and J2EE packages of the SAP Web Application Server by simply specifying the package under Import. In other words, you do not have to import it as an archive into the Integration Repository. You can also access classes of the SAP XML Toolkit, the SAP Java Connector, and the SAP Logging Service (see also: Runtime Environment (Java-Mappings)).
In addition to the standard packages, you can also specify Java packages that you have imported as archives and that are located in the same, or in an underlying software component version as the message mapping.
b. Create your Java source text in the editor window or copy source text from another editor.</i>
http://help.sap.com/saphelp_nw04/helpdata/en/22/e127f28b572243b4324879c6bf05a0/content.htm
Regards
Vijaya

Mapping Problem ORDERS Idoc to Edifact

Hi,
I have a mapping problem with the IDOC ORDERS:
I get the IDOC with several E1EDP01. Each E1EDP01 has several E1EDPT1, where i want only the first one (which I get over the TDID value). Each E1EDPT1 has min. 1 E1EDPT2.
Now I have to map each field TDLINE from first two E1EDPT2 of the first E1EDPT1 to the Edifact fields /LIST/S_UNB/S_UNH/G_SSG25/S_LIN/S_IMD[1]/C_C273/D_7008 (from the first E1EDPT2) and, if a second E1EDPT2 exists in /LIST/S_UNB/S_UNH/G_SSG25/S_LIN/S_IMD[1]/C_C273/D_7008_2.
I use following UDF:
//a = TDLINE
//b = Number of entry in the List
int pos =Integer.parseInt(b[0]);
if ( pos < a.length )
result.addValue(a[pos]);
else
result.addValue(ResultList.SUPPRESS);
Unfortunatly, I think becaus of the context problems (not every E1EDPT1 has two E1EDPT2), it's not working. Could somebody help me with this problem?
Thanks in advance
Dominic

Dear Dominic ,
I had same problem when I was trying to do the same thing for FTX segment.
Your UDF is fine but you don't need else condition.
//a = TDLINE
//b = Number of entry in the List
int pos =Integer.parseInt(b[0]);
if ( pos < a.length )
result.addValue(a[pos]);
for C_C273 assigned contant value and
D_7008 assigned TDLINE but change the context to E1EDPT1
and for D_7008_2
TDLINE(context to E1EDPT1 )
====>UDF====>D_7008_2
Contant(=1)
It should work becasue my map is working fine. If not let me know error message.
Thanks
Shubhankar

Mapping problem:from E1EDK14-ORGID to PORDCR102-PUR_GROUP

Mapping problem:from E1EDK14-ORGID to PORDCR102-PUR_GROUP
E1EDK14 occurs 4 times in the source sys:
1   E1EDK14-QUALF = '014'
     E1EDK14-ORGID = 'YP01'      <= purchase organization
2   E1EDK14-QUALF = '009'
     E1EDK14-ORGID = '001'      <= purchase group
3   E1EDK14-QUALF = '013'
     E1EDK14-ORGID = 'NB'      <= document type
4   E1EDK14-QUALF = '011'
     E1EDK14-ORGID = 'C999'      <= company code
I always want to copy "E1EDK14-ORGID = '001'" to PORDCR102-PUR_GROUP.
I have a solution which works but not perfect:
E1EDK14-ORGID=>copyvalue[1]=>PORDCR102-PUR_GROUP
I want to have the perfect mapping as follow:
IF E1EDK14-QUALF = '009'.
E1EDK14-ORGID = '001' => PORDCR102-PUR_GROUP
ENDIF.
I did it in the data flow editor as follow:
/PORDCR102/IDOC/E1PORDCR1/E1BPMEPOHEADER/PUR_GROUP=
ifWithoutElse([keepss=false]stringEquals
(removeContexts(/ORDERS05/IDOC/E1EDK14/QUALF=),
const([value=009])), /ORDERS05/IDOC/E1EDK14/ORGID=)
But the result in the target sys is always 'YP0'(The first E1EDK14-ORGID)
How to solve this problem?
Thanks
ming yu

Hi,
Try like this.
E1EDK14-QUALF   --------
Constant(009) ----------------   EqualsS ---------------
                                                             And(Boolean Function)     ------ IfWithoutElse -- PORDCR102-PUR_GROUP
E1EDK14-ORGID -------                                                      E1EDK14-ORGID ----------------
Constant(001) --------------   EqualsS ------------------
Regards,
P.Venkat

Problem with call of function F4UT_RESULTS_MAP in search help exit

Hi everybody,
i have a problem concerning call of function F4UT_RESULTS_MAP.
I call this function in this way:
CALL FUNCTION 'F4UT_RESULTS_MAP'
       TABLES
            shlp_tab          = p_shlp_tab
            record_tab        = p_record_tab
            source_tab        = lt_zv055[]
       CHANGING
            shlp              = p_shlp
            callcontrol       = p_callcontrol
       EXCEPTIONS
            illegal_structure = 1
            OTHERS            = 2.
in lt_zv055[] there are results from previous select, but i want to select only values,
that match select options that are specified in p_shlp.
But it always shows all the values that are in lt_zv055.
What am i doing wrong?
Thanks in advance.

Read the "Notes" part in FM documentation and you will find the reason .

Reg:Mapping problem in XI

Dear Friends,
My scenario is IDOC to IDOC.When ever sales order is created in ECC 5.0. New purchase order will be created in ECC 6.0.
Configuration has been done and the scenario is working fine for single record.Multiple line Items are not being updated in Purchase order.Cause of EAN field data overwrites the article master field data for multiple records.and getting the error msg as material is not available(But this is EAN no).If I send single SO with one line Item new PO got created.
This has to be done in mapping only.Pls revert,How to do this in Mapping.
Thanks in advance.
Best Regards,
Naresh.K

Hi,
As per the given query I am still doubtful that changing the occurance of IDOC will solve this problem.
Changing the occurance of IDOC will create the multiple IDOCs. But the requirment is for multiple line items under single SO ie.e under one IDOC.
This is absolutly the mapping part where the occurance of the line items are misplaced.
Please can you provide the source and target idoc structure with expected output and current output (missplaced the values due to occurance).
This will help to try for the solution.
thanks
Swarup

MAPPING PROBLEM - SIMPLE vs. ADVANCED FUNCTIONS

Similar Messages

Maybe you are looking for