Mapping with multiple Adaptive rfc's

Hi Experts,
i have 4 radio buttons, i need to create a single adaptive rfc model, to which i need to create a one ECC system rfc and APO system rfc(multiple backend systems). how to add the two rfc systems of logical system name to a single logical system name or Meta data, so that i can assign to a single radio button.
In the same way for model data also if so how?
1. radio button(Ecc rfc and Apo rfc)
2.radio button (Ecc rfc and Apo rfc)
3.radio button(Ecc rfc and Apo rfc)
4.radio button (Ecc rfc and Apo rfc)
help me in doing step by step.
thanks in advance
Thanks&Regards
jay

Hi Bhargava,
thank you for your effort.
The node structure of web service looks like this:
NewAWS2Model
-Context
Number
NameFirst
NameLast
Street
HouseNo
PostCode
City
-NewOperartion
In
-Request_NewOperation
---NewOperation
---Response
-Response_NewOperation
This web service give no response back. He just starts the BPM Process. Everything works well, except for passing ALL values of the parameters in Context: Number, Name, Street...
When I have two streets, I want that two streets will be saved in parameter street and so on...
Additionally, here is the method created by application for this web service:
public void initRequest_NewOperation( ) {
    //@@begin initRequest_NewOperation()
    //$$begin Service Controller1(-482113598)
com.sap.demo.changedataportaldc.wd.models.newaws2model.NewAWS2Model newAWS2ModelModel = createAndMapModelInstance_0("com.sap.demo.changedataportaldc.wd.models.newaws2model.NewAWS2Model");
        com.sap.demo.changedataportaldc.wd.models.newaws2model.Request_NewOperation request_NewOperation = wdContext.nodeRequest_NewOperation().createAndAddRequest_NewOperationElement().modelObject();
        com.sap.demo.changedataportaldc.wd.models.newaws2model.NewOperation newOperation = new com.sap.demo.changedataportaldc.wd.models.newaws2model.NewOperation(newAWS2ModelModel);
        request_NewOperation.setNewOperation(newOperation);
        com.sap.demo.changedataportaldc.wd.models.newaws2model.Context in = new com.sap.demo.changedataportaldc.wd.models.newaws2model.Context(newAWS2ModelModel);
        newOperation.setIn(in);
        com.sap.demo.changedataportaldc.wd.models.newaws2model.Response_NewOperation response_1 = new com.sap.demo.changedataportaldc.wd.models.newaws2model.Response_NewOperation(newAWS2ModelModel);
        request_NewOperation.setResponse(response_1);
I hope this are the inforamtion you need? Or is there something else?
Thank you very much
best regards
Anna

Similar Messages

Mapping with multiple adaptive web service model-how to map?

sorry, i´ve posted this two times....sorry
Edited by: Anna_von_Landsberg on Jan 5, 2011 8:32 PM

Hi Bhargava,
thank you for your effort.
The node structure of web service looks like this:
NewAWS2Model
-Context
Number
NameFirst
NameLast
Street
HouseNo
PostCode
City
-NewOperartion
In
-Request_NewOperation
---NewOperation
---Response
-Response_NewOperation
This web service give no response back. He just starts the BPM Process. Everything works well, except for passing ALL values of the parameters in Context: Number, Name, Street...
When I have two streets, I want that two streets will be saved in parameter street and so on...
Additionally, here is the method created by application for this web service:
public void initRequest_NewOperation( ) {
    //@@begin initRequest_NewOperation()
    //$$begin Service Controller1(-482113598)
com.sap.demo.changedataportaldc.wd.models.newaws2model.NewAWS2Model newAWS2ModelModel = createAndMapModelInstance_0("com.sap.demo.changedataportaldc.wd.models.newaws2model.NewAWS2Model");
        com.sap.demo.changedataportaldc.wd.models.newaws2model.Request_NewOperation request_NewOperation = wdContext.nodeRequest_NewOperation().createAndAddRequest_NewOperationElement().modelObject();
        com.sap.demo.changedataportaldc.wd.models.newaws2model.NewOperation newOperation = new com.sap.demo.changedataportaldc.wd.models.newaws2model.NewOperation(newAWS2ModelModel);
        request_NewOperation.setNewOperation(newOperation);
        com.sap.demo.changedataportaldc.wd.models.newaws2model.Context in = new com.sap.demo.changedataportaldc.wd.models.newaws2model.Context(newAWS2ModelModel);
        newOperation.setIn(in);
        com.sap.demo.changedataportaldc.wd.models.newaws2model.Response_NewOperation response_1 = new com.sap.demo.changedataportaldc.wd.models.newaws2model.Response_NewOperation(newAWS2ModelModel);
        request_NewOperation.setResponse(response_1);
I hope this are the inforamtion you need? Or is there something else?
Thank you very much
best regards
Anna

I need your expert opinion on how to create a map with multiple conditions.

Hello.
I need your expert opinion on how to create a map with multiple conditions.
I have a procedure (which i cannot import or re-create in OWB due to the bug), so i am trying to create a map instead :-(
How can i create a cursors within the map?
My function creates table and cursor.
Then it will have to check for duplicates in the tables (the one created and another table) - the criteria for finding duplicates is a number of fields.I then need to place few different conditions (if some attributes are not available) and it has to load cursor based on this conditions. The next step is to fetch the data into the cursor based on what attributes are missing.
The next thing it will do is insert the data into table (if record doesn't exist), output the error in separate table is record is corrupted, or update the record with changed information.
In short i need to re-create match / merge but with conditions, iterations etc 'built into' it.
I can read up on available functions - it's just what would be the best options? and what would be the best approach to do so?
In my function i use %rowtype - but cannot use it in owb - so what would be the alternative? i don't really want to create a lot of variables and then have a nightmare of maintaing it. are there any tips regarding this?
having looked through Oracle dedupe - it's not really what i need because it is just DISTINCT.
I would appreciate any help / advise on this.
Thank you very much

thanks a lot for your reply - i will look into this option :-)
it is a bit more complicated now as i have to re-create the match / merge and then somehow 'tweak' it to achieve the result i need.
At the moment i am looking to breakdown the package into smaller chunks 'functions' and try creating the map that way.
Anyway, thank you very much for your suggestion.

Item master Item mapping with multiple vendors

Hi Experts,
I need your help, I have one item like 'TV' in item master and need to enter multiple prices make wise samsung,sony,lg like.
How can I maintain this in SAP B1 2005B.
One Item mapping with multiple vendors with price...
Thanks,

Dear Aarti,
I would recommend to have multiple items for the different brands you are selling.
For example, you can call the item code Samsung, Sony etc and all of these item can be added to an item group called TV.
Then you can assign a price to the items in the price lists.
Alternatevely, if you need to have one single item called TV and different prices according to the brand, create a number of price lists called Sony, Sumsung etc and then if you know which customers buy a particular brand you can connect the price list to the customer under
Business partner master data - Payment Terms - Price list.
Please, if these 2 options are not helpful let us know the exact scenario and business reason behind your request.
Kind Regards,
Marcella Rivi
SAP Business One Forums Team

How do i test split by value functionality in mesage mapping with multiple

how do i test split by value functionality in mesage mapping with multiple values ?
regards,
venkat

repeat your source node. in mapping editor you can view queues by right clicking to mapped element.. selecting Display Queues option.. this will show u your values .
You can also select this Display Queue option for splitByValue option
for example
source--->splitByValue>target
Try viewing your queues to each this step... for splitByValue in display Queue you will see context inserted(grey colour) accodingly

ABAP Mapping with multiple records

Hi All,
I am doing an ABAP mapping and I am new to this.
I have a following record structure:
<record>
   <field1>
   <field2>
   <fieldn>
</record>
I will receive the multiple records with the above structure in single file.
I have following the Blog from SDN but it is saying only for single record.
Can please someone post the code for handing multiple records (ie. loop structure).
or else please mail me at [email protected]
Regards,
Shylesh

Hi Thanks for the reply.
But actually these threads do not sufficient for my requriement.
I written the following code and it is working fine for one single record. But I want to change this code to work for multiple records which I am not able to do as I am new to Object Oriented.
method IF_MAPPING~EXECUTE.
initialize iXML
type-pools: ixml.
class cl_ixml definition load.
create main factory
data: ixmlfactory type ref to if_ixml.
ixmlfactory = cl_ixml=>create( ).
create stream factory
data: streamfactory type ref to if_ixml_stream_factory.
streamfactory = ixmlfactory->create_stream_factory( ).
create input stream
data: istream type ref to if_ixml_istream.
istream = streamfactory->create_istream_xstring( source ).
parse input document =================================================
initialize input document
data: idocument type ref to if_ixml_document.
idocument = ixmlfactory->create_document( ).
parse input document
data: iparser type ref to if_ixml_parser.
iparser = ixmlfactory->create_parser( stream_factory = streamfactory
                                                 istream = istream
                                                document = idocument ).
iparser->parse( ).
get message content of tag <empno>
data: incode type ref to if_ixml_node_collection.
data: incode1 type ref to if_ixml_node_collection.
data: incode2 type ref to if_ixml_node_collection.
data: incode3 type ref to if_ixml_node_collection.
data: incode4 type ref to if_ixml_node_collection.
data: incode5 type ref to if_ixml_node_collection.
data: incode6 type ref to if_ixml_node_collection.
data: incode7 type ref to if_ixml_node_collection.
data: incode8 type ref to if_ixml_node_collection.
data: incode9 type ref to if_ixml_node_collection.
incode = idocument->get_elements_by_tag_name( 'empno' ).
incode1 = idocument->get_elements_by_tag_name( 'empname' ).
incode2 = idocument->get_elements_by_tag_name( 'address1' ).
incode3 = idocument->get_elements_by_tag_name( 'address2' ).
incode4 = idocument->get_elements_by_tag_name( 'address3' ).
incode5 = idocument->get_elements_by_tag_name( 'zipcode' ).
incode6 = idocument->get_elements_by_tag_name( 'mailid' ).
incode7 = idocument->get_elements_by_tag_name( 'phoneno' ).
incode8 = idocument->get_elements_by_tag_name( 'country' ).
incode9 = idocument->get_elements_by_tag_name( 'city' ).
get XI header data (here: "Sender Service")
data: l_sender_service type string.
l_sender_service = param->get( if_mapping_param=>sender_service ).
add trace (appears in message monitoring)
data: l_trace type string.
concatenate 'Sender Service = ' l_sender_service into l_trace.
trace->trace( level = '1'
message = l_trace ).
build up output document =============================================
create output document
data: odocument type ref to if_ixml_document.
odocument = ixmlfactory->create_document( ).
create element 'SenderService' and add it to the document
data: msgtype type ref to if_ixml_element.
msgtype = odocument->create_simple_element( name = 'record'
                                            parent = odocument ).
create element 'SenderService' and add it to the output document
data: elementsender type ref to if_ixml_element.
elementsender = odocument->create_simple_element( name = 'SenderService'
                                                   value = l_sender_service
                                                  parent = msgtype ).
add node to the output document
data: outcode type ref to if_ixml_node.
data: outcode1 type ref to if_ixml_node.
data: outcode2 type ref to if_ixml_node.
data: outcode3 type ref to if_ixml_node.
data: outcode4 type ref to if_ixml_node.
data: outcode5 type ref to if_ixml_node.
data: outcode6 type ref to if_ixml_node.
data: outcode7 type ref to if_ixml_node.
data: outcode8 type ref to if_ixml_node.
data: outcode9 type ref to if_ixml_node.
outcode = incode->get_item( index = 0 ).
outcode1 = incode1->get_item( index = 0 ).
outcode2 = incode2->get_item( index = 0 ).
outcode3 = incode3->get_item( index = 0 ).
outcode4 = incode4->get_item( index = 0 ).
outcode5 = incode5->get_item( index = 0 ).
outcode6 = incode6->get_item( index = 0 ).
outcode7 = incode7->get_item( index = 0 ).
outcode8 = incode8->get_item( index = 0 ).
outcode9 = incode9->get_item( index = 0 ).
data irc type i.
irc = msgtype->append_child( outcode ).
irc = msgtype->append_child( outcode1 ).
irc = msgtype->append_child( outcode2 ).
irc = msgtype->append_child( outcode3 ).
irc = msgtype->append_child( outcode4 ).
irc = msgtype->append_child( outcode5 ).
irc = msgtype->append_child( outcode6 ).
irc = msgtype->append_child( outcode7 ).
irc = msgtype->append_child( outcode8 ).
irc = msgtype->append_child( outcode9 ).
render document ======================================================
create output stream
data: ostream type ref to if_ixml_ostream.
ostream = streamfactory->create_ostream_xstring( result ).
create renderer
data: renderer type ref to if_ixml_renderer.
renderer = ixmlfactory->create_renderer( ostream = ostream
                                          document = odocument ).
irc = renderer->render( ).
endmethod.
Can anybody help me making these changes.
Thanks in advance.
Shylesh

Problem in mapping with multiple values

Hi all,
I am facing a problem during mapping. I am explainning the problem with a example.
Suppose i have a source table named Employee which has two columns emp no and account no. I have a target table Emp_account which has also the same columns.
One employee may have more than one accounts. In source table this account nos are stored in account no column in one row corresponding to emp no. The multiple values in account no are separated by comma for one record in source table.
But in the target table Emp_account a single record will be inserted for each employee's separate account. There should not be multiple values separated by comma in account no column of target table.
So if any employee has two accounts this will be stored as one row in source table but in target table it will divided into two different rows for each account.
EMPLOYEE(Source)
emp no account no
10 101, 102
EMP_ACCOUNT(Target)
emp no account no
10 101
10 102
Think I explained the requirement.. How can i made this in OWB mapping editor..Is it possible?...Can any operator perform this task...If any of u know about this plzz give some solution..It's very important ..
Thanks & Regards,
Sumanta Das

Hi,
With reference to your question.
Can any operator perform this task..I don't think any single operator will help you.
I suggest using an intermediate (staging) table by using a PL SQL procedure with output port to store the values of account number provided the number of accounts are limited. Else use an array variable for account of an employee.
In short no simple solution because of the bad source design else the pivot/unpivot operator would have helped you.
Cheers
- Mohammed

ACE: a class-map with multiple ports... what about the probe/serverfarm?

Hello Gilles,
One question about something I was not able to find in the documentation.
Lets say I have one class-map which includes 2 ports (in this case https and 5061).
Can I associate this class-map to just 1 generic serverfarm and probe for both ports or I have to specify 2 serverfarms/rservers/probes?
So, by not specifying the ports on the rserver, if a request is received on port 443 (or 5061), it is sent to the same respective port on the rserver?
The same way is valid for the generic probe. ACE module is able to probe both ports based on the class-map?
Thanks and have a great day!!
Giulio.
probe tcp PROBE_GENERIC_TCP
description This probe works for all TCP services by inheriting the VIP port.
interval 15
faildetect 2
passdetect interval 15
passdetect count 2
open 2
rserver host SERVER1_ACCESS
ip address <1AC>
inservice
rserver host SERVER2_ACCESS
ip address <2AC>
inservice
serverfarm host ACCESS-SFARM
probe PROBE_GENERIC_TCP
rserver SERVER1_ACCESS
    inservice
rserver SERVER2_ACCESS
    inservice
class-map match-any OCS_L4ACCESS
2 match virtual-address x.x.x.176 tcp eq https
2 match virtual-address x.x.x.176 tcp eq 5061
policy-map type loadbalance first-match OCS_L4ACCESS
class class-default
    sticky-serverfarm ACCESS_STICKY
policy-map multi-match POLICY
class OCS_L4ACCESS
loadbalance vip inservice
loadbalance policy OCS_L4ACCESS
loadbalance vip icmp-reply active
connection advanced-options OCS_VIPTIMEOUT
nat dynamic XXX vlan 503

Even if you use the 4710 appliance or expect the inheritance in the module software, it's worth considering if this is really what you want. If you keep multiple ports in the L3/L4 class-map you can't handle the services independently. You will have a common serverfarm for both https and 5061. If https service stops on one rserver, the ACE will place that rserver (and not that service) in out-of-operation state and it won't receive any 5061 traffic either. (You have the fail-on-all probe option but I wouldn't say it's a better choice. In that case, https traffic would be sent to the rserver even if https port is closed as long as there is at least one working service on it.) That's why I prefer a separate class-map and separate serverfarm for each service. (They can contain the same rservers, no need to duplicate.) BUT if the software supports probe port inheritance, you can benefit from it even in this scenario: serverfarm-443 and serverfarm-5061 can both use your PROBE_GENERIC_TCP.

Interface Mapping with Multiple Message Mappings

Hi My Scenario is
File to Idoc.( Multiple records to Multiple idocs )
Due to Complexity of Mapping I split the Mapping step into 2.
My Source System does not provide Namspace when they are sending XML Data.
When I try 2 mappings individually both Mappings works fine.
However when I try test using Interface Mapping target messages are not generated.
Since 2nd Mapping invoves Mapping Split its expecting extra tags as shown here in the Targert Message generated from Message Mapping 1.
<i><ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
   <ns0:Message1></i>
How can I solve this problem ?

When I do Message Mapping:
From message Mapping 1 target Produced is as follows:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:CostMaintenanceXI xmlns:ns0="http://test.xxx.com">
<CostMaintenanceXI>
<CostMaintenanceXI>
<Product>000000000000000023</Product>
<Plant>1401</Plant>
<Supplier>0000000001</Supplier>
<ValidityFrom>20021212</ValidityFrom>
<DIIndicator>ZFOB</DIIndicator>
<COGAmount></COGAmount>
<COGCurrency></COGCurrency>
<FreightAmount></FreightAmount>
<FreightCurrency></FreightCurrency>
<MISCAmount></MISCAmount>
<MISCCurrency></MISCCurrency>
<SPAAmount></SPAAmount>
<SPACurrency></SPACurrency>
<LandedCaseCost></LandedCaseCost>
<LandedCaseCurrency></LandedCaseCurrency>
<FrontLinePrice></FrontLinePrice>
<FrontLinePriceCurrency></FrontLinePriceCurrency>
</CostMaintenanceXI>
</CostMaintenanceXI>
</ns0:CostMaintenanceXI>
in 2nd Mapping I entered some details in the test tab and the generated source is as follows:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
   <ns0:Message1>
      <ns1:CostMaintenanceXI xmlns:ns1="http://test.xxx.com">
         <CostMaintenanceXI>
            <CostMaintenanceXI>
               <Product>1</Product>
               <Plant>1</Plant>
               <Supplier>2</Supplier>
               <ValidityFrom>12212122</ValidityFrom>
               <FOBIndicator/>
               <DIIndicator>ZFOD</DIIndicator>
               <COGAmount>10</COGAmount>
               <COGCurrency/>
               <FreightAmount>10</FreightAmount>
               <FreightCurrency/>
               <MISCAmount>10</MISCAmount>
               <MISCCurrency/>
               <SPAAmount>10</SPAAmount>
               <SPACurrency/>
               <LandedCaseCost/>
               <LandedCaseCurrency/>
               <FrontLinePrice/>
               <FrontLinePriceCurrency/>
            </CostMaintenanceXI>
         </CostMaintenanceXI>
      </ns1:CostMaintenanceXI>
   </ns0:Message1>
</ns0:Messages>
As you can see both of the above structures differs in xmlns. I dont see anything else weird.

Handeling mapping with multiple nodes

Hi,
            We are doing an IDOC to SOAP scenario, in which we have multiple nodes in source structure. In destination structure we have one node having multiple occurences (1..99). We are trying to do the mapping in such a way that on the basis of no. of nodes at source side, nodes at destination side should be created.
                              Any idea how to perform this mapping? Is it necessary to use BPM for this?

1. Node 1 -> count ->
2. Node 2 -> count ->
3. Use ADD(std function) 1 and 2
4. then after step 3 use UDF given below and then mapp to target node
create advance UDF function and click on radio button "Queue".
in the imports section enter java.lang.;java.util.;java.lang.reflect.;java.io.;
   //write your code here
String e = a[0];
int b = Integer.parseInt(e);
for(int i=0;i<b;i++)
result.addValue("1");
result.addContextChange();
This is working for me...
suppose node1 occurs 3 times and node2 occurs 2 times the target node will occur 3 + 2 = 5 times
Giving points is another way to say thanks
Edited by: Tarang Shah on Mar 4, 2009 2:06 PM

Commit in Mapping with multiple targets

I have a mapping that updates 4 target tables. I just noticed that within the generated mapping each update has it's own commit. Rather than having 4 commits in my mapping I want just one. This is so if I have a failure during the mapping the (i.e. tablespace full error) the data is left in a consistent state.
Is this configuratble?
OWB 11g

Configure your mapping to do Automatic Correlated or Manual commit not Automatic as it is set as default value.

Adaptive RFC and multiple systems; Mapping JCO_DESTINATIONS by code?

Hi,
I have just learned <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/82/76a2406546ba15e10000000a1550b0/frameset.htm">here</a> that I can access several R/3 systems with the adaptive RFC model by using URL parameters like:
http://<hostname>:<port>/webdynpro/dispatcher/local/ESSProject/ESSApp?
<b>sap-wd-arfc-useSys=WD_MODELDATA_DEST:ABC&
sap-wd-arfc-useSys=WD_RFC_METADATA_DEST:ABC</b>
The parameters are a mapping of the original JCO_DESTINATION (WD_MODELDATA_DEST) called by the WebDynpro application to the target system which instead should be called (WD_MODELDATA_DESTABC).
Does someone know wheather this mapping can be done by java coding? For example before the execute method will be called.
Best regards,
Marcus

Hi,
This for If you send destination params are different u sent it thru URL param only.
For that u need generate URL by using the application .
For that purpose u need to create two applications u can call the first application in second application u can create URL and send Destination params with URL only.
Other wise u can create the par file that would be configured in portal and thru worksets u can pass the params like u mention the destinations.
Or at the time generationg URLS only u can add the destination names.
Thanks,
Lohi.

Integrated weblogic server Issue with Host name mapped to multiple IPs

I am running very simple ADF application from Jdev 11g (11.1.1.3.0).
Compilation was successful but weblogic server facing problem while starting.
It is showing HostAName is mapped with Multiple IP Addresses.
Please provide solution to fix the issue....
log is,
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_18"
Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Ddomain.home=C:\Users\Raja\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1 -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=C:\Users\Raja\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1 -Doracle.server.config.dir=C:\Users\Raja\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.security.jps.config=C:\Users\Raja\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\Users\Raja\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Users\Raja\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\Users\Raja\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
<Dec 23, 2010 11:49:42 AM EST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 16.0-b13 from Sun Microsystems Inc.>
<Dec 23, 2010 11:49:44 AM EST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401 >
<Dec 23, 2010 11:49:46 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Dec 23, 2010 11:49:46 AM EST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Dec 23, 2010 11:49:46 AM EST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\Raja\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Dec 23, 2010 11:49:46 AM EST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\Raja\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00001. Log messages will continue to be logged in C:\Users\Raja\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<Dec 23, 2010 11:49:46 AM EST> <Notice> <Log Management> <BEA-170019> <The server log file C:\Users\Raja\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<Dec 23, 2010 11:49:57 AM EST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Dec 23, 2010 11:50:14 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Dec 23, 2010 11:50:14 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Dec 23, 2010 11:50:28 AM EST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\Raja\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Dec 23, 2010 11:50:28 AM EST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\Raja\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00001. Log messages will continue to be logged in C:\Users\Raja\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<Dec 23, 2010 11:50:28 AM EST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Dec 23, 2010 11:50:31 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[7]" is now listening on 0:0:0:0:0:0:0:1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:114b:ab6a:23b1:b44c:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[6]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 192.168.10.103:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:c48:60a:9d0d:7cda:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on fe80:0:0:0:0:5efe:c0a8:a67:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on fe80:0:0:0:95ca:d058:6a51:53e8:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Warning> <Server> <BEA-002611> <Hostname "Raja-PC", maps to multiple IP addresses: 192.168.10.103, fe80:0:0:0:114b:ab6a:23b1:b44c%12, fe80:0:0:0:c48:60a:9d0d:7cda%13, 2001:0:4137:9e76:c48:60a:9d0d:7cda>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 2001:0:4137:9e76:c48:60a:9d0d:7cda:7101 for protocols iiop, t3, ldap, snmp, http.>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Dec 23, 2010 11:50:32 AM EST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<Logger><error> ServletContainerAdapter manager not initialized correctly.
Edited by: user1158476 on Dec 23, 2010 3:05 PM

Thanks for reply...
If you look at the last line of log there is some error message:
<Logger><error> ServletContainerAdapter manager not initialized correctly.
after this no further logs and web page not open in Browser.

One adaptive RFC Model and Multi Backend System.

Hi All,
I am trying to fetch data from multi backend system by using an adaptive RFC model.
It is not tidy to create multi model for a RFC function to fetch data from multi SAP system, because we have dozens of SAP systems.(over 40)
So, I would like to switch to multiple SAP systems with an adaptive RFC model at runtime.
1 model(Same Function) -
> System A
> System B
> System C
Is there any sample or tutorial about this sort of senario?
Thanks in advance.
Message was edited by: JeongEog IM
Message was edited by: JeongEog IM

JeongEog,
You may use SAP java Connector for doing that. Refer the following links for the step-by-step approach.
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/d2/561106b8b3bc449f890cddfdc8d3e2/content.htm">Example program 1</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/f0/eedf3d0eb8af5ee10000000a114084/content.htm">Open Connection</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/24/efdf3d0eb8af5ee10000000a114084/content.htm">Calling a Function and Closing a Connection</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/6a/14e13d8ee4535ee10000000a114084/content.htm">Example program 2</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/bc/eedf3d0eb8af5ee10000000a114084/content.htm">Connection Pool</a>
Bala

How can I create a hashmap() with multiple values for the same key?

I am trying to write an application that will us something like a Map() with multiple values but some have the same key. Is this possible?

i had the same question. just create a List, add all the values u want to it, and then put the List into the map like u would a normal single value. e.g.
List list = new ArrayList();
list.add(value1);
list.add(value2);
map.put(key, list);
i bet u r doing the same course as i am =)

Mapping with multiple Adaptive rfc's

Similar Messages

Maybe you are looking for