Master Data Loading from APO--- BW System

Hi Experts,
I am loading master  data from the APO to bW System,after loading data into the BW System ,I found the number of data records are mismatching
ex:APO (8340) --->BW (9445)
and that to I tried to delet the data in InfoObject,
only some records are deleting
and one more doubt
in APO i have info object ZA9MATNR CHAR 40
With Conversion Routine PRODU
in BW i have the same info object ZA9MATNR CHAR 40 with Conversion Routine ALPHA.
and I have checked the Check box in transfer rules also,may be becoz of this I am getting more records.
Could any body help me
Thanks in Advance...
Regards,
Nagamani.

Hi,
Ideally it is impossible to get the increased count of data records when you load it into BW unless you are using the RETURN TABLE concept.
Normally the record count decreases with the records with same keys gets overwritten/added.
Coming to your second question, ALPHA conversion routine has nothing to do with the record count. It appends the ZEROS to the value coming in that InfoObject. For example, if the lenght of the object is 5 and data is coming only in 3 digits, it will append the ZEROS to make its length 5.
Hope this info helps you.
Regards,
Yogesh.

Similar Messages

  • Master data load from 2 source system

    Hi all,
            I am working on a project which has 2 source systems.
    Now I have to load master data from 2 source systems without making 0LOGSYS as compunding
    attribute. Because all the objects which i want to use compunding attribute are reference
    objects for lot of other info objects. So, i dont want to change the business content
    objects structure. Please guide me
    Thanks

    Hi,
    I cube there is nothing to do with compounding attribute, it will be handled in MD IO level.  As your requirement to separate the transaction happen in different source system then make add another info object as Zsource and make it as nav. attribute then design your report based on nav. attribute.
    Note that this separation is only possible in Material Related transaction not for others.
    Thanks
    BVR

  • Automated data load from APO to SEM transactional cube

    Hi ,
    We have BW-SEM system integrated with APO system.
    I could see automated data loads from APO to SEM transactional cube ..
    Infopackage name as "Request loaded using the APO interface without monitor log" ..
    I don't see any infopackage by this name in both the systems ( APO & SEM )..
    I am not sure how it configured ..
    Appreciate any inputs on how its happens .....
    Thanks in advance

    Hi,
    As I mentioned the starting point will be the tcode BPS0. There will be 2 planning areas created (if I am correct) one for SEM cube and the other for APO cube. The better way to find it will be goto tcode se16 and enter UPC_BW_AREA and key in the cube names in the cube field. this will give you the planning area names now look for a multiplanning area which has the 2 areas included in them (this is available in table UPC_AREAM).
    then goto BPS0 and you will have to find which function is being used to post the data.
    thanks

  • BPC:: Master data load from BI Process chain

    Hi,
    we are trying to automatize the master data load from BI.
    Now we are using a package with:
    PROMPT(INFILES,,"Import file:",)
    PROMPT(TRANSFORMATION,%TRANSFORMATION%,"Transformation file:",,,Import.xls)
    PROMPT(DIMENSIONNAME,%DIMNAME%,"Dimension name:",,,%DIMS%)
    PROMPT(RADIOBUTTON,%WRITEMODE%,"Write Mode",2,{"Overwirte","Update"},{"1","2"})
    INFO(%TEMPNO1%,%INCREASENO%)
    INFO(%TEMPNO2%,%INCREASENO%)
    TASK(/CPMB/MASTER_CONVERT,OUTPUTNO,%TEMPNO1%)
    TASK(/CPMB/MASTER_CONVERT,FORMULA_FILE_NO,%TEMPNO2%)
    TASK(/CPMB/MASTER_CONVERT,TRANSFORMATIONFILEPATH,%TRANSFORMATION%)
    TASK(/CPMB/MASTER_CONVERT,SUSER,%USER%)
    TASK(/CPMB/MASTER_CONVERT,SAPPSET,%APPSET%)
    TASK(/CPMB/MASTER_CONVERT,SAPP,%APP%)
    TASK(/CPMB/MASTER_CONVERT,FILE,%FILE%)
    TASK(/CPMB/MASTER_CONVERT,DIMNAME,%DIMNAME%)
    TASK(/CPMB/MASTER_LOAD,INPUTNO,%TEMPNO1%)
    TASK(/CPMB/MASTER_LOAD,FORMULA_FILE_NO,%TEMPNO2%)
    TASK(/CPMB/MASTER_LOAD,DIMNAME,%DIMNAME%)
    TASK(/CPMB/MASTER_LOAD,WRITEMODE,%WRITEMODE%)
    But we need to include these tasks into a BI process chain.
    How can we add the INFO statement into a process chain?
    And how can we declare the variables?
    Regards,
    EZ.

    Hi,
    i have followed your recomendation, but when i try to use the process /CPMB/MASTER_CONVERT, with the parameter TRANSFORMATIONFILEPATH and the root of the transformation file as value, i have a new problem. The value only have 60 char, and my root is longer:
    \ROOT\WEBFOLDERS\APPXX\PLANNING\DATAMANAGER\TRANSFORMATIONFILES\trans.xls
    How can we put this root???
    Regards,
    EZ.

  • Master Data Load to APO from SAP MDM through SAP PI

    Hi SDners,
    This is a Parts Master Data Solution for one of the Largest Auto Manufacturer where SAP MDM will be the central hub of all the Global and Local attributes of Parts . The subscribing system is SAP SCM APO . Please advice if there is any possibility of direct integration between APO -MDM through PI. Does PI has the standard IDOC types to communicate with APO.
    Also does APO has some RFC/BAPI to do master data load for Product Master /n/sapapo/mat1
    Thanks,
    Prabuddha

    Hi,
    Check the LUWs in SM58 in source system and then execute it. Else check in BD87 and push the IDocs manually in ECC.
    Thanks
    Reddy
    Edited by: Surendra Reddy on Feb 24, 2009 10:59 AM

  • Regarding master data loading for different source systems

    Hi Friends,
    I have an issue regarding master data loading.
    we have two source systems one is 4.6c and another is ecc 6.0.
    First i am loading the master data from 4.6c to bi7.0.
    Now this 4.6c is upgraded to ecc6.0.
    *In 4.6c and ecc6.0c master data is changing.
    After some time there is no 4.6c, only ecc 6.0 is there.
    Now if i load master data from ecc6.0 to bi7.0 what will happen.
    Is it possible ?
    Could you please tell me?
    Regards,
    ramnaresh.

    Hi ramnaresh porana,
    Yes, its possible. You can load data from ECC.
    Data will not change, may be you may get more fields in datasource at r/3 side, but BW/BI side no change in mappings structures are same. So data also same.
    You need to take care of Delta's before and after upgrade.
    Hope it Helps
    Srini

  • Transferring Product Master Data Changes From APO to ECC/R/3

    Is it possible to transfer product master data changes in APO to ECC via the CIF?  If so, does it require custom coding?

    Hi James,
    In all the different clients where APO is being used with ECC systems. ECC system is always the main system (system of record) which contains all the master data and data present in ECC supposed to be the reference for APO system for planning purpose.
    Generally it is not recommended to transfer master data from APO to ECC but as mentioned earlier by some experts you may have ways to do that.
    I would be interested in the business scenario where one needs to transfer master data from APO to ECC.
    Thanks,
    Anupam
    Edited by: Anupam Sengar on Aug 11, 2011 12:31 AM

  • Master data Load from Oracle table

    Hi,
    My master data comes from an Oracle table. The table has both attributes and texts combined. How do I load the Master data into the text and attribute info objects thru Direct Upload of Master Data?
    Is it necessary to go in for Flexible Upload in this case?
    Regards

    Hi,
    you can create two views on the table. One for the text and the other one for the attributes. Create your datasources on these views and assign them to your infoobject.
    regards
    Siggi

  • Master data extraction from APO BW to BW BW

    Hi Gurus,
    I am having a task to extract data from Demand Planning Infocube in APO BW to the Custom Infocube in BW-BW. My question is how do we get the master data (texts and Attributes) for APO-Material and APO-Location (Plant in BW) from APO BW to BW-BW. Any insight into this please.....

    check this
    master data for demand planning

  • Hierarchy for Master Data Load from BW

    Hi All
    I'm loading Master data from BW infoobject 0Customer. There is no Hierarchy maintained for it in BW.
    Rather than creating hierarchy manually in BPC, I want to include mapping in transformation/conversion file which should roll master data records coming from BW to ALL_CUSTOMERS (member manually maintained in BPC). ALL_CUSTOMERS will be parent node for the hierarchy in BPC. No other levels of hierarchy is required. All the data should have one parent.
    Something like PARENT=*STR(ALL_CUSTOMERS)
    Please share your ideas? Help is very much appreciated.
    Thanks.

    Hi Asif
    If you are laoding master data from BW infoobject, you will not be able to load /specify any value for ParentH1/hierarchy node as BW /BPC does not allow that.
    An option would be to
    1) load hierarchy from a flat file or
    2) to maintain  hierarchy in BW amd load into BPC the normal way
    Regards
    Surabhi

  • Article Master Data Extraction from IS-Retail System

    Hi,
    I have one IS-Retail System with me. I want to extract Article Master data from IS-Retail System.
    Is there any specific procedure to do this? If yes, can anybody tell me the procedure?
    Waiting for your response...
    Cheers,
    Yash K

    Hi Yash,
    you can use transaction BD10 to extract articles. Note that you should change to message type "ARTMAS" instead of "MATMAS".
    Best regards
    Michael

  • Master data loading from an XML file

    Gurus,
    Is it possible to load Master data using XML files as source??

    Hi Niteen,
    how r u ?? hope u r doing fine, yes you can load it !!
    follow this link ..
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/21d8aa90-0201-0010-5e83-a3798b9a5ee0
    Or
    XML data
    regards ..
    Message was edited by:
            SAUGATA SEN

  • Reagarding Master Data loading from ECC

    Hi i want to activate Master Data  for Customer and Material from ECC ,Can any one  give me the clear steps ,and also  i want  to know what is the source for these Material And Customer in ECC.

    Hi
    The datasources are 0CUSTOMER_ATTR and 0MATERIAL_ATTR you can find these in RSA6 if activated under SAP-R/3->LO->LO-IO.
    Assign these to 0CUSTOMER and 0MATERIAL infoobjects in BW for a direct update or you can use the following infosources for flexible update
    0CUSTOMER_ATTR
    0MATERIAL_ATTR
    Also use texts datasources 0CUSTOMER_TEXT & 0MATERIAL_TEXT
    If the above mentioned datasources are not activated (NOT VISIBLE IN RSA6), use RSA5 transaction code to activate them.
    Hope you are familiar with BW and good luck
    Regards

  • How to Load Master Data Text  from Multiple Source Systems

    Situation:  Loading vendor master (text) from two systems.  Some of the vendor keys/number are the same and so is the description.  I understand that if I was loading Attributes, I could create another attribute such a source system id and compound it to 0Vendor.  However, I don't believe you can do the same when loading text. 
    Question:  So, how can I load duplicate vendor keys and description into BW using the *_TEXT datasource so they do not overwrite?
    Thanks!

    Hi,
    Don't doubt, it'll work!
    Sys ID as compound to 0Vendor.
    If you doubt about predefined structure of the *_TEXT datasource and direct infosource, then use a flexible infosource. Maybe you'll have to derive the sys ID in a routine or a formula.
    Best regards,
    Eugene

  • Vendor master data load from flat file

    Hi Experts,
    I am trying to load data from flat file. I am confused which info object i should use. My requirement is for info cube 0BBP_C01.
    As i found for this info cube only two info objects are available: 0BBP_VENDOR and 0VENDOR. But in my flat file i have following fields: Vendor code, Vendor Name, Ultimate Parent, City, Country, Minority Status, Vendor Payment Terms. which all are together not present in either of info objects.
    Please suggest which info object i must use. or should i create Z info object for my requirement?
    Thanks in advance.
    Regards,
    Niranjan Chechani

    Hi Kiran,
    I am loading data through flat file. I am not getting your point like how to get attributes present in the R/3 system which I am not using in this case.
    Hi rvc,
    I have created two characteristics z info objects i.e. ZU_PARENT for Ultimate parent and ZVEN_PAY for Vendor Payment Terms.
    When i am trying to add these two as attributes and add it as Navigational attribute, I am getting the error "Characteristic 0VENDOR: The attibutes SID table(s) could not be filled" (Message no. R7586)
    Please suggest am i wrong somewhere?
    Thanks and Regards,
    Niranjan Chechani
    Edited by: Niranjan Chechani on Nov 28, 2011 12:15 PM

Maybe you are looking for