Master-Detail only shows the first record of the Master's data

I have an ADF Master Table, Detail table. I use ExcuteWithParams on the Master Table. When executed from a button (Button has partial submit = true for button, Master Table has PartialTrigger on button, and Detail table has PartialTrigger on Master table and button), it works fine. However, I want to pass the parameters in pageFlowScope variables, and have the ExecuteWithParams invoked upon page load. When I try to do this, the Detail table only shows the first record of the Master's data, no mater what row is clicked on the Master table.
Master table now has no PartialTrigger, and Detail table has PartialTrigger on Master table. In my pageDef, I used an invoke action as follows:
<invokeAction Binds="ExecuteWithParams" id="invokeExecuteWithParams"
Refresh="always"/>
What am I missing? I am using verion 11.1.1.3. Any help would be much appreciated.
Thanks,
Jessica

Yes, it works when I drag the data control as a master detail without filtering any data. I want the user to be able to set search criteria to filter the data in the master table (For example, only pull back data with a transaction date between :startdate and :enddate). I can get it to work if I execute from an executewithparams button on the page, but not if I want to invoke the executewithparams upon page load with the parameter set by pageflowscope variables.
Thank you for responding.
Jessica

Similar Messages

The detailRegion is always forced to populate the first record from the Master region

Hi fellow Spry enthusiasts,
My question is in regards the undesirable data population of
the regiondetail on initial load. I have 2 sections, one which is
my master region (which goes out and retrieves a bunch of records),
and a related detailregion which reacts based on the master.
However, every time I initiate a query of the master region to
retrieve records, the detail region also responds and automatically
grabs the FIRST record of the master region (which is undesirable
in my case because I do not want the detail region to react UNTIL I
select a record in the master region). Let me know if this makes
sense.
Psuedo Code:
var moveRequestor = new
Spry.Data.XMLDataSet("cfc/QueryThatReturnsABunchOfEmployeeRecords")>
<span spry:region="moveRequestor">
{EM_ID}
{NAME}
<span spry:detailregion="moveRequestor">
{EM_ID}
{NAME}
{PHONE}

This question was posted a while ago, and was one of the
search results that came up when I was looking for my own answer. I
had a nearly identical question and answered it here:
Disabling
default linked region and detailregiondisply until click
Hopefully it will help others too!

Oracle Forms returns the first record in the database when performing query

Once in a while when we query for a record on a form, say by first name Tom, then it returns the first record in the database. Other times it return the Tom's record. It only happens once in a while and if you close the form and reopen it and requery for Tom, then it brings Tom's record.
Does anyone know the issue what could be happening. It just happens every now and then that it's hard to reproduce.
ORacle Forms 10GR2
ORacle Application Server 10.1.3
thanks

then it returns the first record in the databaseI'm not sure if i understand you correctly. Do you mean forms ignores the searc-condition you entered? I would check SYSTEM.LAST_QUERY at the moment this happens to check if the condition gets somehow lost.

Update a record is updating the first record in the DB...HELP!

I am going over and over this again and cant find the problem.
i have a form that sends email to emails that are on a php mysql db however when i update certain records it always is updating the first record in the DB...i have looked over this so many times and cant see what is going wrong
the userid is not auto_increment but is based on the username (these are all unique)
i have uncluded the code to see if i am missing something
<?php require_once('../Connections/hostprop.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
    $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
$editFormAction = $_SERVER['PHP_SELF'];
if (isset($_SERVER['QUERY_STRING'])) {
$editFormAction .= "?" . htmlentities($_SERVER['QUERY_STRING']);
if ((isset($_POST["MM_update"])) && ($_POST["MM_update"] == "form1")) {
$updateSQL = sprintf("UPDATE plus_signup SET email=%s, emailerSubject=%s, emailerContent=%s WHERE userid=%s",
                       GetSQLValueString($_POST['email'], "text"),
                       GetSQLValueString($_POST['emailerSubject'], "text"),
                       GetSQLValueString($_POST['emailerContent'], "text"),
                       GetSQLValueString($_POST['userid'], "text"));
mysql_select_db($database_hostprop, $hostprop);
$Result1 = mysql_query($updateSQL, $hostprop) or die(mysql_error());
      // Email Guarantor
          $to = $_POST['email'];
          $subject = "Email From Host Student Property";
          $message = "
          <html>
                    <head>
                              <title>Dear ".GetSQLValueString($_POST['userid'], "text")."</title>
                    </head>
                    <body>
                              <img src=\"http://www.hoststudent.co.uk/beta/images/hostlogo.gif\" alt=\"www.HostStudent.co.uk\" />
                              <h2>An Email From Host Students</h2>
                              <br /><br />
                              <table>
                                        <tr>
                                                  <td>Email Subject:</td>
                                        </tr>
                                        <tr>
                                                  <td>".GetSQLValueString($_POST['emailerSubject'], "text")."</td>
                                        </tr>
                                        <tr>
                                                  <td>Email Content</td>
                                        </tr>
                                        <tr>
                                                  <td>".GetSQLValueString($_POST['emailerContent'], "text")."</td>
                                        </tr>
                              </table>
                    </body>
          </html>
          // Always set content-type when sending HTML email
          $headers = "MIME-Version: 1.0" . "\r\n";
          $headers .= "Content-type:text/html;charset=iso-8859-1" . "\r\n";
          $headers .= 'From: HostStudent.co.uk <[email protected]>' . "\r\n";
          $send = mail($to,$subject,$message,$headers);
$updateGoTo = "TenantEmailSent.php";
if (isset($_SERVER['QUERY_STRING'])) {
    $updateGoTo .= (strpos($updateGoTo, '?')) ? "&" : "?";
    $updateGoTo .= $_SERVER['QUERY_STRING'];
header(sprintf("Location: %s", $updateGoTo));
mysql_select_db($database_hostprop, $hostprop);
$query_Recordset1 = "SELECT userid, email, emailerSubject, emailerContent FROM plus_signup";
$Recordset1 = mysql_query($query_Recordset1, $hostprop) or die(mysql_error());
$row_Recordset1 = mysql_fetch_assoc($Recordset1);
$totalRows_Recordset1 = mysql_num_rows($Recordset1);
?>
<?
          session_start();
          if(!$_SESSION['loggedIn']) // If the user IS NOT logged in, forward them back to the login page
                    header("location:Login.html");
?>
   <script type="text/javascript">
function loadFields(Value) {
         var Guarantor = Value.split("|");
          var userid1 = Guarantor[0] ;
                      var GuName = Guarantor[1];
          var GuPhoneEmail = Guarantor[2] ;
          document.getElementById('userid1').value=userid1;
                      document.getElementById('GuName').value=GuName;
          document.getElementById('GuPhoneEmail').value=GuPhoneEmail;
</script>
<form action="<?php echo $editFormAction; ?>" method="post" name="form2" id="form2">
              <table align="center">
      <tr valign="baseline">
        <td nowrap="nowrap" align="right"> </td>
        <td><select name="userid" id="userid" onchange="loadFields(this.value)">
          <option value="Select Guarantor">Select Guarantor</option>
          <?php
do {
?>
<option value="<?php echo $row_Recordset1['userid'] . '|' . $row_Recordset1['GuName'] . '|' . $row_Recordset1['GuPhoneEmail'];?>"><?php echo $row_Recordset1['userid'] . " , " . $row_Recordset1['GuName'] . " , " . $row_Recordset1['GuPhoneEmail']; ?></option>
          <?php
} while ($row_Recordset1 = mysql_fetch_assoc($Recordset1));
$rows = mysql_num_rows($Recordset1);
if($rows > 0) {
      mysql_data_seek($Recordset1, 0);
            $row_Recordset1 = mysql_fetch_assoc($Recordset1);
?>
        </select></td>
      </tr>
      <tr valign="baseline">
        <td nowrap="nowrap" align="right">Tenant Name</td>
        <td><input type="text" name="userid1" id="userid1" readonly="readonly" value="<?php echo htmlentities($row_Recordset1['userid'], ENT_COMPAT, 'utf-8'); ?>" size="32" /></td>
      </tr>
      <tr valign="baseline">
        <td nowrap="nowrap" align="right">GuName:</td>
        <td><input type="text" name="GuName" id="GuName" readonly="readonly" value="<?php echo htmlentities($row_Recordset1['GuName'], ENT_COMPAT, 'utf-8'); ?>" size="32" /></td>
      </tr>
      <tr valign="baseline">
        <td nowrap="nowrap" align="right">GuPhoneEmail:</td>
        <td><input type="text" name="GuPhoneEmail" id="GuPhoneEmail" readonly="readonly" value="<?php echo htmlentities($row_Recordset1['GuPhoneEmail'], ENT_COMPAT, 'utf-8'); ?>" size="32" /></td>
      </tr>
      <tr valign="baseline">
        <td nowrap="nowrap" align="right">GuEmailerSubject:</td>
        <td><input type="text" name="GuEmailerSubject" value="" size="32" /></td>
      </tr>
      <tr valign="baseline">
        <td nowrap="nowrap" align="right">GuEmailerContent:</td>
        <td><textarea name="GuEmailerContent" cols="45" rows="5"> </textarea></td>
      </tr>
      <tr valign="baseline">
        <td nowrap="nowrap" align="right"> </td>
        <td><input type="submit" value="Send email" /></td>
      </tr>
      <tr valign="baseline">
        <td nowrap="nowrap" align="right"></td>
        <td> </td>
      </tr>
              </table>
    <input type="hidden" name="MM_update" value="form2" />
    <input type="hidden" name="userid" value="<?php echo $row_Recordset1['userid']; ?>" />
</form>

i have found the problem, there were two forms with the same name..
thanks

How can I do a multiple record data merge, but specify that a specific text frame with variable data only merges on the first record?

I'm doing a multiple record data merge, I have 2 frames both with variable data placed inside.
I would like to specify that one of the text frames only merges once(first record) and the other frame multiple times for each record in the data file.
Is it possible?
I thought that perhaps if I place the text frame that must merge once on the master page, it would work. But you are not allowed to place variable text on the master and on the document page.
I'm going to try it through scripting next, but thought that perhaps there is an easier way that I'm not aware of.
Thanks,
Suzanne

Suzanne,
If you were trying to post a screen shot, you would need to return to the forum and post it using the "camera" icon at the top of the post editing windows.
I use a plug-in from Em Software called InData. One of the benefits for what I do is there are no individual frames on a page to deal with post-merge. Individual frames are great for simple merges (address labels, post cards, etc.). But I typically do more other types of merges.
That said, there is a drawback--one needs to come to an understanding of writing expressions that actually parse the incoming data. So in the spice price list example, that looks like:
It's reasonably easy once one does it a few times. And it can be far more complicated. The above is from Em Software's samples that has been tweaked. The best thing I can recommend would be to download the trial and see for yourself. They are good at responding to specific questions if you get stumped.
I imagine this all could be scripted somehow in ID. But I have no idea how and the plug-in just lets me keep working.
Mike

How to populate only the first record by default when the page opens?

Dear Members,
I am using OAF R12 and my requirement is as follows:-
When the user opens the custom OAF R12 page, I just want to query the first record from the underlying VO.
For example, If the table has 10 rows, I just want to query the first row as soon as the page opens.
I have written the below code:-
Process Request Method of the CO:-_
am.invokeMethod("initHeaders");
Code in AM_
public void initHeaders()
HeadersVOImpl hVO = getHeadersVO1();
hVO.initQueryHeaders();
Code in VO_
public void initQueryHeaders()
executeQuery();
As it is very clear that with the above code all the records will be queried. I have to add something before the executeQuery() method in the VO to just query the first record.
Can any one please help me by guiding me what I should add before the executeQuery() method in the VO?
Many thanks in advance.
Regards,
R4S.

Hello Gyan,
Many thanks for your reply.
The below line in your code is throwing incompatible type error:
OARow row = vo.first();
Can you please help me.
Regards,
R4S

Unable to search for first record using the Preview tree

Post Author: TheBig1980s
CA Forum: General
Hello:
Users are unable to search for the first record in the Preview tab's tree. The reason for this is because the first record is within the first page header of the report. My guess is that, by design, Crystal takes the end user to whatever the first instance of the record iseven if that first record is in a page header. That's not "good". I want the user to be taken to the first record within the details of the reportnot within the page header.
I have suppressed the page header to not print on the first record by using OnFirstRecord. But, I still get the same issue where end users cannot select the first record in the tree without being taken to the page header. Very strange.
Can anybody think of any other ideas?
Thanks!
TheBig1980s

Thank you Dave Merchant and try67 for your responses. As per my previous post, I contacted the company re the catalogue and they have responded favourably. I'll include their response because it gives the reason for the search failure as document compression which you might find interesting. I'll await their new catalogue and see if they have fixed the problem.
Company response:
Thank you very much for your input. And yes, you are correct, the compression we used for the current catalogue's PDF format does strip out text included in the catalogue. We used the compression settings we did with the intention of minimising download time, however I take your point about including text for search purposes (which I also utilise when I'm scanning through PDFs).
We will actually be posting out our new catalogue next week and we'll release the new PDF version on the website at the same time. I've asked our graphic designer to ensure that the PDF we use for the new catalogue includes searchable text.

DB Adapter: Polling For New Records returns the First record multiple Times

I Polling for New or Chnaged Records against DB2 on iSeries. The DB Adapter returns the first record from the Table multiple Times. If the Table has 5 records it displays the first record 5 times. I am using BPEL 10.1.3.1 Can anyone help me with this.

Hi there,
please check out the DBAdapter trouble-shooting guide:
http://download-east.oracle.com/docs/cd/B31017_01/integrate.1013/b28994/app_trblshoot.htm#CIHFEHFA
I am copying an entry from there into here:
A.1.21 Some Queried Rows Appear Twice or Not at All in the Query Result
Problem
When you execute a query, you may get the correct number of rows, but some rows appear multiple times and others do not appear at all.
This behavior is typically because the primary key is configured incorrectly. If the database adapter reads two different rows that it thinks are the same (for example, the same primary key), then it writes both rows into the same instance and the first row's values are overwritten by the second row's values.
Solution
Open Application Sources > TopLink > TopLink Mappings. In the Structure window, double-click PHONES. On the first page, you should see Primary Keys. Make sure that the correct columns are selected to make a unique constraint.
Save and then edit the database partner link.
Click Next to the end, and then click Finish and Close.
Open your toplink_mappings.xml file. For the PHONES descriptor, you should see something like this:
<primary-key-fields>
<field>PHONES.ID1</field>
<field>PHONES.ID2</field>
</primary-key-fields>
Thanks
Steve

How to return to the first record of a multiple row cursor (Forms 6i)

Hi all,
I had a bit of a search through here, but couldn't quite find the answer I'm after.
I have a multiple row cursor, which I feed into a multi-row block in Forms 6i. I have the following code:
OPEN CURSOR;
LOOP
   FETCH CURSOR INTO :FIELD1, :FIELD2, :FIELD3, :FIELD4;
   ... do other code not related with cursor
   EXIT WHEN CURSOR%NOTFOUND;
   NEXT_RECORD;
END LOOP;Now, I use the Forms built-in NEXT_RECORD to move down through the records on the form and fill in each row from the db. However, once the block loads (this works correctly), the current item (ie where the typing cursor is left) is on the last record.
Obviously, I need the current item (after loading) to be on the first record. I tried using the Forms built-in FIRST_RECORD after the END LOOP command, but that gives me an ORA-06511 error (An attempt was made to open a cursor that was already open).
Does anyone know how I might be able to return to the first record of the block correctly?
Thanks in Advance,
Chris.

Ok, I feel like a bit of a dolt.
I found that all cursors had to be closed before navigating back to the first record.
Case closed! :)

Display only the first record

I have report in BEx where we want to find the first time a customer ordered Quantity of more than 500 in a data range (For Ex: From April 10 to April 30). In a particluar date range the customer may order more than once (Qty > 500). The catch is we want display only one first time he ordered qty > 500.
Customer    Date         Qty > 500.
ABC         4/21/2005        2,035 CA
          4/22/2005        12,290 CA
          4/23/2005        4,826 CA
          4/26/2005        6,397 CA
          4/27/2005        1,538 CA
          4/28/2005        4,849 CA
XYZ         4/25/2005        2,000 CA
          4/26/2005        12,000 CA
          4/27/2005        4,500 CA
          4/28/2005        6,300 CA
In the output report we want to display the first record for each customer as:
Customer    Date         Qty > 500.
ABC         4/21/2005        2,035 CA
XYZ         4/25/2005        2,000 CA
Your help is really appreciated. Thanks.

jayant,
i think, you could use your date as a condition to filter by in your report... try looking that the properties of your KF and, under Calculations, set the 'Calculate Result as...' to the first value only.
hope this helps - don't forget to give out points. =)
ryan.
ps. i've tried this, and it sort of works - just need a bit more of tweaking around. =)
Message was edited by: Ryan Kristoffer Tan

Report without the first record using JasperReports

Hi everyone,
I�m using JasperReports127 but the first record is not being showed...
I really don�t know why... Does someone had the same problem?!
I follow this tutorial:
http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/reports.html
Gustavo Callou

I forgot to say that what ir really interesting is that in the iReport Aplication the report works fine... but in the jsc not...
my setor.jrxml is bellow:
<?xml version="1.0" encoding="UTF-8" ?>

<!DOCTYPE jasperReport PUBLIC "//JasperReports//DTD Report Design//EN" "http://jasperreports.sourceforge.net/dtds/jasperreport.dtd">
<jasperReport
          name="classic"
          columnCount="1"
          printOrder="Vertical"
          orientation="Portrait"
          pageWidth="595"
          pageHeight="842"
          columnWidth="535"
          columnSpacing="0"
          leftMargin="30"
          rightMargin="30"
          topMargin="20"
          bottomMargin="20"
          whenNoDataType="NoPages"
          isTitleNewPage="false"
          isSummaryNewPage="false">
     <property name="ireport.scriptlethandling" value="0" />
     <property name="ireport.encoding" value="UTF-8" />
     <import value="java.util.*" />
     <import value="net.sf.jasperreports.engine.*" />
     <import value="net.sf.jasperreports.engine.data.*" />
     <queryString><![CDATA[select *
from tb_setor
where tb_setor.incodigosetor > '0'
order by tb_setor.vanome
]]></queryString>
     <field name="INCODIGOSETOR" class="java.math.BigDecimal"/>
     <field name="VANOME" class="java.lang.String"/>
     <field name="VARAMAL" class="java.lang.String"/>
          <background>
               <band height="0" isSplitAllowed="true" >
               </band>
          </background>
          <title>
               <band height="50" isSplitAllowed="true" >
                    <staticText>
                         <reportElement
                              x="61"
                              y="5"
                              width="412"
                              height="40"
                              key="staticText"/>
                         <box topBorder="None" topBorderColor="#000000" leftBorder="None" leftBorderColor="#000000" rightBorder="None" rightBorderColor="#000000" bottomBorder="None" bottomBorderColor="#000000"/>
                         <textElement textAlignment="Center">
                              <font size="28" isBold="true"/>
                         </textElement>
                    <text><![CDATA[Setores]]></text>
                    </staticText>
                    <line direction="TopDown">
                         <reportElement
                              x="0"
                              y="48"
                              width="534"
                              height="0"
                              forecolor="#000000"
                              key="line"
                              positionType="FixRelativeToBottom"/>
                         <graphicElement stretchType="NoStretch" pen="2Point"/>
                    </line>
                    <line direction="TopDown">
                         <reportElement
                              x="0"
                              y="3"
                              width="534"
                              height="0"
                              forecolor="#000000"
                              key="line"/>
                         <graphicElement stretchType="NoStretch" pen="2Point"/>
                    </line>
               </band>
          </title>
          <pageHeader>
               <band height="9" isSplitAllowed="true" >
               </band>
          </pageHeader>
          <columnHeader>
               <band height="20" isSplitAllowed="true" >
                    <rectangle radius="0" >
                         <reportElement
                              mode="Opaque"
                              x="1"
                              y="1"
                              width="534"
                              height="17"
                              forecolor="#000000"
                              backcolor="#999999"
                              key="element-22"/>
                         <graphicElement stretchType="NoStretch" pen="Thin"/>
                    </rectangle>
                    <staticText>
                         <reportElement
                              x="0"
                              y="1"
                              width="267"
                              height="16"
                              forecolor="#FFFFFF"
                              key="element-90"/>
                         <box topBorder="None" topBorderColor="#000000" leftBorder="None" leftBorderColor="#000000" leftPadding="2" rightBorder="None" rightBorderColor="#000000" rightPadding="2" bottomBorder="None" bottomBorderColor="#000000"/>
                         <textElement>
                              <font fontName="" size="12"/>
                         </textElement>
                    <text><![CDATA[Setor]]></text>
                    </staticText>
                    <staticText>
                         <reportElement
                              x="267"
                              y="1"
                              width="267"
                              height="16"
                              forecolor="#FFFFFF"
                              key="element-90"/>
                         <box topBorder="None" topBorderColor="#000000" leftBorder="None" leftBorderColor="#000000" leftPadding="2" rightBorder="None" rightBorderColor="#000000" rightPadding="2" bottomBorder="None" bottomBorderColor="#000000"/>
                         <textElement>
                              <font fontName="" size="12"/>
                         </textElement>
                    <text><![CDATA[Ramal]]></text>
                    </staticText>
               </band>
          </columnHeader>
          <detail>
               <band height="19" isSplitAllowed="true" >
                    <line direction="TopDown">
                         <reportElement
                              x="0"
                              y="17"
                              width="535"
                              height="0"
                              forecolor="#808080"
                              key="line"
                              positionType="FixRelativeToBottom"/>
                         <graphicElement stretchType="NoStretch" pen="Thin"/>
                    </line>
                    <textField isStretchWithOverflow="true" pattern="" isBlankWhenNull="true" evaluationTime="Now" hyperlinkType="None" hyperlinkTarget="Self" >
                         <reportElement
                              x="0"
                              y="1"
                              width="267"
                              height="15"
                              key="textField"/>
                         <box topBorder="None" topBorderColor="#000000" leftBorder="None" leftBorderColor="#000000" leftPadding="2" rightBorder="None" rightBorderColor="#000000" rightPadding="2" bottomBorder="None" bottomBorderColor="#000000"/>
                         <textElement>
                              <font fontName="Times-Roman" size="12"/>
                         </textElement>
                    <textFieldExpression class="java.lang.String"><![CDATA[$F{VANOME}]]></textFieldExpression>
                    </textField>
                    <textField isStretchWithOverflow="true" pattern="" isBlankWhenNull="true" evaluationTime="Now" hyperlinkType="None" hyperlinkTarget="Self" >
                         <reportElement
                              x="267"
                              y="1"
                              width="267"
                              height="15"
                              key="textField"/>
                         <box topBorder="None" topBorderColor="#000000" leftBorder="None" leftBorderColor="#000000" leftPadding="2" rightBorder="None" rightBorderColor="#000000" rightPadding="2" bottomBorder="None" bottomBorderColor="#000000"/>
                         <textElement>
                              <font fontName="Times-Roman" size="12"/>
                         </textElement>
                    <textFieldExpression class="java.lang.String"><![CDATA[$F{VARAMAL}]]></textFieldExpression>
                    </textField>
               </band>
          </detail>
          <columnFooter>
               <band height="0" isSplitAllowed="true" >
               </band>
          </columnFooter>
          <pageFooter>
               <band height="27" isSplitAllowed="true" >
                    <textField isStretchWithOverflow="false" pattern="" isBlankWhenNull="false" evaluationTime="Now" hyperlinkType="None" hyperlinkTarget="Self" >
                         <reportElement
                              x="325"
                              y="4"
                              width="170"
                              height="19"
                              key="textField"/>
                         <box topBorder="None" topBorderColor="#000000" leftBorder="None" leftBorderColor="#000000" rightBorder="None" rightBorderColor="#000000" bottomBorder="None" bottomBorderColor="#000000"/>
                         <textElement textAlignment="Right">
                              <font fontName="Helvetica" size="10"/>
                         </textElement>
                    <textFieldExpression class="java.lang.String"><![CDATA["Page " + $V{PAGE_NUMBER} + " of "]]></textFieldExpression>
                    </textField>
                    <textField isStretchWithOverflow="false" pattern="" isBlankWhenNull="false" evaluationTime="Report" hyperlinkType="None" hyperlinkTarget="Self" >
                         <reportElement
                              x="499"
                              y="4"
                              width="36"
                              height="19"
                              forecolor="#000000"
                              backcolor="#FFFFFF"
                              key="textField"/>
                         <box topBorder="None" topBorderColor="#000000" leftBorder="None" leftBorderColor="#000000" rightBorder="None" rightBorderColor="#000000" bottomBorder="None" bottomBorderColor="#000000"/>
                         <textElement textAlignment="Left" verticalAlignment="Top" rotation="None" lineSpacing="Single">
                              <font fontName="Helvetica" pdfFontName="Helvetica" size="10" isBold="false" isItalic="false" isUnderline="false" isPdfEmbedded ="false" pdfEncoding ="CP1252" isStrikeThrough="false" />
                         </textElement>
                    <textFieldExpression class="java.lang.String"><![CDATA["" + $V{PAGE_NUMBER}]]></textFieldExpression>
                    </textField>
                    <line direction="TopDown">
                         <reportElement
                              x="0"
                              y="1"
                              width="535"
                              height="0"
                              forecolor="#000000"
                              key="line"/>
                         <graphicElement stretchType="NoStretch" pen="2Point"/>
                    </line>
                    <textField isStretchWithOverflow="false" pattern="" isBlankWhenNull="false" evaluationTime="Now" hyperlinkType="None" hyperlinkTarget="Self" >
                         <reportElement
                              x="1"
                              y="6"
                              width="209"
                              height="19"
                              key="textField"/>
                         <box topBorder="None" topBorderColor="#000000" leftBorder="None" leftBorderColor="#000000" rightBorder="None" rightBorderColor="#000000" bottomBorder="None" bottomBorderColor="#000000"/>
                         <textElement>
                              <font fontName="Times-Roman" size="10"/>
                         </textElement>
                    <textFieldExpression class="java.util.Date"><![CDATA[new Date()]]></textFieldExpression>
                    </textField>
               </band>
          </pageFooter>
          <summary>
               <band height="0" isSplitAllowed="true" >
               </band>
          </summary>
</jasperReport>

Getting the first record

I have a table containing infor about employees promotion details.Problem is that the table was so badly designed that the only way for me to know the first promotion that an employee got in that year was the way it was inserted.Hence below for Manohar ,91 was the first promotion in the year 2001 and
for Sanohar it is 81.
Wondering is there sql query throught which I can get hold of the first record that was inserted.
YEAR____EMPCODE_____NAME_______POSITION
2001______02_________Manohar________91
2001______02_________Manohar________01
2001______02_________Manohar________07
2001______03_________Sasohar________81
2001______03_________Sasohar________84
2001______03_________Sasohar________87

this migth be of help:
SQL> select rowid, year, empcode, name, position
2    from employees;
ROWID              YEAR EM NAME       PO
AAD8PAAAJAAAAzwAAA 2001 02 Manohar    91
AAD8PAAAJAAAAzwAAB 2001 02 Manohar    01
AAD8PAAAJAAAAzwAAC 2001 02 Manohar    07
AAD8PAAAJAAAAzwAAD 2001 03 Sasohar    81
AAD8PAAAJAAAAzwAAE 2001 03 Sasohar    84
AAD8PAAAJAAAAzwAAF 2001 03 Sasohar    87
6 rows selected.
Elapsed: 00:00:00.00
SQL> select emp.year, emp.empcode, emp.name, emp.position,
2         emp.promotion, rowid
3    from (select year, empcode, name, position,
4                 rank() over (partition by empcode order by rowid) promotion
5            from employees) emp
6 /
YEAR EM NAME       PO PROMOTION ROWID
2001 02 Manohar    91          1 AAD8PAAAJAAAAzwAAA
2001 02 Manohar    01          2 AAD8PAAAJAAAAzwAAB
2001 02 Manohar    07          3 AAD8PAAAJAAAAzwAAC
2001 03 Sasohar    81          1 AAD8PAAAJAAAAzwAAD
2001 03 Sasohar    84          2 AAD8PAAAJAAAAzwAAE
2001 03 Sasohar    87          3 AAD8PAAAJAAAAzwAAF
6 rows selected.
Elapsed: 00:00:00.00
SQL> note: you can use the rowid to identify which row has been inserted first. if this is something that you want to get the first row that was inserted.

Interactive buttons on master pages only appearing on first instance in document [CS6]

I have a document being created for on-screen use that has next and previous buttons in the design. These buttons are on the master page with the 'On Click go to next/previous page' behaviour applied.
When the document is exported the buttons only appear on the first instance of that master page. IE. If pages 2-20 are created from that master, the buttons only appear on page 2.
I've seen other people reporting this problem in some other threads without an answer, so hopefully someone will see this who knows what the issue is.
I presume this is something to do with CS6, this is occuring in a document that was originally created in CS3 or 4. It's been revived for a new edition, and the buttons used to work perfectly under the old version, but now they're behaving as described. I've recreated them from scratch as well as using the previous version, but the results are the same.

Wasn't there an Acrobat issue that affected this as well? Make sure that is updated, too.
While I'm on it, this is being viewed in Acrobat/Reader, right? Anything else, especially Mac Preview is a bit of crapshoot.

How to map only the first occurance to the op in graphical mapping

Hi,
i have a record whose occurance is ' * '.But to the output i need to only map the value of the field which comes in the first occurance of the record.Can anyone help me in this.its very urgent.
For ex :
my input is
<header>
<inp1>123</inp1>
<inp2>hello</inp1>
</header>
<header>
<inp1>456</inp1>
<inp2>hello</inp1>
</header>
To the output field <op1> i have to Map ' inp1 ' field but it has to take the value of the first inp1 i.e "123" only always.Any help on how to do this.
Thanks in advance,
Bhargav
Message was edited by:
bhargav gundabolu

Hi Raj,
My inp structure is:
<header>
<inp1>123</inp1>
<inp2>hello</inp1>
</header>
<header>
<inp1>456</inp1>
<inp2>hello</inp1>
</header>
This has to me mapped to the output structure
<result>
</op1>
</result>
After Mapping inp1 to op1 my structure should appear as
<result>
<op1>123</op1>
</result>
<result>
<op1>123</op1>
</result>
where <Header> node is mapped to </result>.As <result> has to appear as many times as Header appears.But the <op1> value has to be same as that of the <inp1> of the first <Header>

Php page won't display the first record

I have the following code, but it always skip the first row of the records pull from an Oracle table:
include "utility_functions.php";
// Form the query and execute it
$sql = "select * from dept where cid=".$_GET['q'];
$result_array = execute_sql_in_oracle ($sql);
$result = $result_array["flag"];
$cursor = $result_array["cursor"];
if ($result == false){
display_oracle_error_message($cursor);
die("Client Query Failed.");
// Display the query results
echo "<ul class=\"nav\">";
$values = oci_fetch_array ($cursor);
//echo $values[0];
// Fetch the result from the cursor one by one
while ($values = oci_fetch_array($cursor)){
$did = $values[0];
$dname = $values[1];
echo("<li><a href=\"showdetail.php?did=$did\">$dname</a></li> ");
oci_free_statement($cursor);
echo "</ul>";
for example, I have the following in dept table:
did    dname
1     Business
2     Education
3     Math
4     English
It will only list: education, math, and english. Any clues?

What does execute_sql_in_oracle() do?
Try following example code, such as from:
        http://www.php.net/manual/en/oci8.examples.php
        http://www.php.net/manual/en/function.oci-fetch-array.php
        http://www.php.net/manual/en/function.oci-bind-by-name.php
It's extremely insecure (and slow) to do a query made up with string concatenation like:
$sql = "select * from dept where cid=".$_GET['q'];
You probably need to first sanitize $_GET to remove anything malicious. Then you must use a bind variable on the sanitized result.

Master-Detail only shows the first record of the Master's data

Similar Messages

Maybe you are looking for