Match Total Exposure Not Working For Me
I am taking several pictures (sometimes 100s) of the same object in a studio setting. I have all of the camera controls locked down in manual mode so things like ISO, aperture, and shutter speed are uniform across the entire shoot. I am also using flash for external lighting. My problem arises because the flash will produce different levels of light from shot to shot (despite being in manual mode) so the pictures have different lighting levels - some are brighter than others.
Is there any way to batch process these photos to have a uniform level of light? It seems as though the Match Total Exposure feature creates no change at all. Is that because the ISO, aperture etc. is the same in all the pictures? I need a way to correct for the fluctuating light output of the flash.
>Is that because the ISO, aperture etc. is the same in all the pictures
Yes. That is exactly what "Match exposures" does. It looks at ISO, aperture, and shutter and corrects to get to the same EV. If all your images were shot at the same settings, they can't be corrected this way. This is not the way to do consistent flash exposure BTW. You should be correcting either flash output or aperture based on distance (or ISO if you don't want to change aperture or flash intensity) as the intensity of light on your subject decreases inverse square law with distance. Most camera systems can do this automatically based on focus distance and some through the lens flash metering but it is possible to do this manually too. If your flash is off camera (e.g. shooting through an umbrella or bouncing on a ceiling or somesuch) you often don't need to do this and you can stay at one exposure since the distance of the flash to your subject generally doesn't change and so amount of light on the subject doesn't vary.
> I need a way to correct for the fluctuating light output of the flash.
Can't be done easily in Lightroom. The only way is manually correcting visually. It is almost impossible to automate something like this although I guess you could generate some scripts in Photoshop that looks for common tones (like flesh tones) and equalize them. Not at all trivial though and very much a highly advanced thing to try. Your best bet is manual exposure compensation. Should be very quick. Just arrow through and correct either in quick develop with a few clicks or in Develop.
Similar Messages
-
It has been 6 days and iTunes Match just does not work for me!
It starts but never finishes step 3 and starts all over again. I do not know what to do.
Hi Jojo,
could you please kindly try this UDF, no need to add any variable var1 as input, just map this to the target root as you were doing previously.
public String getFileName(Container container){
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
ourSourceFileName=ourSourceFileName.replaceAll(".txt",".xml");
conf.put(key, ourSourceFileName);
return ourSourceFileName;
In your code you have one line as shown below
filename = filename.replaceAll( ".txt" ,"_" );
I am not sure why you added this in your code,maybe you wanted an underscore to be added to your target filename.
In that case just modify one line of the code I wrote above
this line
ourSourceFileName=ourSourceFileName.replaceAll(".txt",".xml"); is to be replaced by this
ourSourceFileName=ourSourceFileName.replaceAll(".txt","_.xml");
Ensure the following events
1. Sender CC has ASMA and file name ticked
2. Receiver CC has ASMA and file name ticked
3. "fail if ASMA missing" untick this. If this UDF runs successfully then later you can tick this and save the changes.
3. UDF has no input as variable, since you are not using the var1 variable anywhere in your code.
4. in receiver communication channel -> File access parameters-> File name scheme -
> put a default filename with XML extension such as default.xml.
Hope this helps.
regards
Anupam -
FORMULA=USING/TOTAL IS NOT WORKING IN BPC NW.
Hi,
I am doing Migration project from BPC MS to BPC NW 7.5. In this I am not able test the Allocation formula.
FORMULA=USING/TOTAL.
Here in this Total is not working. The final result same as USING combinational value. The formula is working for USING combination like FORMULA=USING/100,USING*100....,
WHERE=WHAT* USING/TOTAL.Let me know is there any solution for this.Could you please update me on this.
Find the below sample code for the Allocation Logic.
LOGIC:
*RUNALLOCATION
*DIM P_ACCT WHAT=CE0004010; WHERE=CE0004020; USING=CE0004030; TOTAL=CE0004210
*DIM CATEGORY WHAT=PLAN; WHERE=PLAN; USING=PLAN; TOTAL=PLAN
*DIM P_CC WHAT=India; WHERE=India; USING=India; TOTAL=India
*DIM P_DATASRC WHAT=UPLOAD; WHERE=UPLOAD; USING=UPLOAD; TOTAL=UPLOAD
*DIM P_ACTIVITY WHAT=Repair; WHERE=Repair; USING=Repair; TOTAL=Repair
*DIM RPTCURRENCY WHAT=LC; WHERE=LC; USING=V; TOTAL=LC
*DIM TIME WHAT=2009.JAN; WHERE=2009.APR; USING=2009.MAR; TOTAL=2009.MAY
After exccuting this formula and by observing the Formula Log one record write back message displayed.
Thanks and Regards,
VC kRISHNA.Hi,
Please find the below Allocation logic. Here in this case also getting the same out put. The whare combinational value same as using. This Allocation Logic and the previous one is working with out fail in the MS version. Let me know is this may be a product issue. Could you please update me in this.
Logic:
*RUNALLOCATION
*FACTOR=USING/TOTAL
*DIM PROJECT WHAT=BAS(CorpBudg_Project); WHERE=[SCTSQ1]="Y"; USING=<<<; TOTAL=No_PPC
*DIM ENTITY WHAT=PC10102106; WHERE=NO_PCENTER; Using=<<<; TOTAL=NO_PCENTER
*DIM ACCOUNT WHAT=BAS(Corp_Budg_Accnts); WHERE=880014; USING=<<<; TOTAL=<<<
*DIM DATASRC WHAT=INPUT; WHERE=<<<;USING=<<<; TOTAL=<<<
*DIM RPTCURRENCY WHAT=LC; WHERE=<<<; USING=<<<; TOTAL=<<<
*DIM CLIENT_GROUP WHAT=1010; WHERE=<<<; USING=<<<; TOTAL=<<<
*DIM CATEGORY WHAT=BUDGET; WHERE=<<<; USING=<<<; TOTAL=<<<
*DIM INTCO WHAT=Non_InterCo; WHERE=<<<; USING=<<<; TOTAL=Alloc_PC10102106
*DIM TIME WHAT=BAS(2011.TOTAL); WHERE=<<<; USING=2011.BSS; TOTAL=<<<
*ENDALLOCATION
*COMMIT
Thanks and Regards,
Krishna. -
Incoming Email not working for one web app, but IS working for others in same farm.
I have enabled incoming email in a large multi-web application farm running SharePoint 2013 SP1 and the Feb 2015/March 2015 CUs that were pushed down in Windows Updates. It works just fine for two web applications, but it will not work for one particular
web application. I see the email land in the /drop folder. If I remove the email address from the library in http://nonworkingapp web
application and use it on a library in a http://working web application, then the email is processed successfully. Conversely,
if I take an address from a library in http://working and move it to a library inhttp://nonworkingapp it
does not work. I've tried multiple site collections on http://nonworkingapp. This rules out any SMTP issues, etc. and means
the issue is bound to this web application. Permissions are the same between the "non-working" and "working" locations: domain users are members on the site, and the library inherits permissions from the site. The App Pool and Timer
Service accounts have rights to the folder and to the library.
The error in the ULS log is the typical error processing message, but it gives no additional information even though I have enabled Verbose logging.
The Incoming E-Mail service has completed a batch. The elapsed time was 00:00: 00.0156294. The service processed 2 message(s) in total. Errors occurred processing 2 message(s): Message ID: Message
ID:
Typically, you see "alias not found" or some permissions or quota issue here, but this issue is NOT the same as those. In this case NO additional information is provided in ULS.
Edit: running stsadm.exe -o refreshdms -url http://one/failing/site fixed some similar issues where "Unknown alias" was
reported even though the list did have an alias (see here:http://blogs.technet.com/b/vinitt/archive/2009/07/15/e-mail-enabled-list-alias-information-is-not-synchronized-between-configuration-database-and-content-database.aspx).
This did not fix the issue for the case mentioned above.
What could possibly be the issue preventing incoming email from working on this one web application?Thanks for your reply. Incoming E-Mail was running on all 3 WFE, however I do not think this was the cause. As noted, _other_ emails send to http://workingapp are working just fine. I can send two emails - one to a library on http://workingapp
and another on http://notworkingapp. The email to http://notworkingapp will sit in the drop folder, while the one to http://workingapp will be processed correctly. In addition, the ULS log on WFE1 indicates an attempt to process the file fails.
So clearly, the timer job on WFE1 is running and attempting to process the file. For kicks, I disabled the service on WFE2 and WFE3, but with no change in the behavior.
WRT to #1, I have done this already (as noted in the original post). I can remove an alias from http://workingapp and place it on http://nonworkingapp and it is not processed. If I return it to http://workingapp it is processed. In other
words, I go into Library Settings -> Incoming Email for a working library, and copy the alias, then disable incoming email for that library. I then go to Library Settings -> Incoming Email for a non-working library, enable incoming email, and paste
the alias. Once done, emails sent to the alias are not processed. I then do the reverse, and it works again.
On #2, I have already tried multiple libraries on http://nonworkingapp (also as noted in the original post).
In my environment, incoming email does not work for any library on http://nonworkingapp, but does work for any library on http://workingapp. Troubleshooting listed above has ruled out any problem with basic mail server configuration or library settings
- the problem is bound to http://nonworkingapp
I'm not sure what you mean by "steps to reproduce the issue". If I knew that, I would probably be able to solve the issue. The best I could come up with to describe the situation would be:
Set up SP 2010 in a three-node configuration with multiple web apps
Enable incoming email and confirm it works
Migrate to a SP2013 SP1 farm in a three node configuration.
Enable a new email alias for a library
Observe that it doesn't work for one web application.
Obviously, it's pretty unlikely that attempting that in a lab would actually have the same result. -
Tacacs not working for 3 new 5508 WLC's...working fine for 6 old 4400 WLC's.
before 7.116 code upgrade...I remember 5508 was working on and off and now they are not.
Same configs on SW, WLC and ACS.
Debug on WLC gives..below message when Tacacs is attempted..
*aaaQueueReader: Oct 25 09:20:41.700: tplus_processAuthRequest: memory alloc failed for tplus
Any pointers for troubleshooting? Not sure why statistics show zero...?? Radius is working for users.
(wlc03) >show tacacs auth statistics
Authentication Servers:
Server Index..................................... 1
Server Address................................... 10.3.121.21
Msg Round Trip Time.............................. 0 (msec)
First Requests................................... 0
Retry Requests................................... 0
Accept Responses................................. 0
Reject Responses................................. 0
Error Responses.................................. 0
Restart Responses................................ 0
Follow Responses................................. 0
GetData Responses................................ 0
Encrypt no secret Responses...................... 0
Challenge Responses.............................. 0
Malformed Msgs................................... 0
Bad Authenticator Msgs........................... 0
Timeout Requests................................. 0
Unknowntype Msgs................................. 0
Other Drops...................................... 0
Server Index..................................... 2
--More-- or (q)uit
Server Address................................... 10.3.121.22
Msg Round Trip Time.............................. 0 (msec)
First Requests................................... 0
Retry Requests................................... 0
Accept Responses................................. 0
Reject Responses................................. 0
Error Responses.................................. 0
Restart Responses................................ 0
Follow Responses................................. 0
GetData Responses................................ 0
Encrypt no secret Responses...................... 0
Challenge Responses.............................. 0
Malformed Msgs................................... 0
Bad Authenticator Msgs........................... 0
Timeout Requests................................. 0
Unknowntype Msgs................................. 0
Other Drops...................................... 0
(wlc03) >show tacacs summary
Authentication Servers
Idx Server Address Port State Tout
1 10.3.121.21 49 Enabled 5
2 10.3.121.22 49 Enabled 5
Authorization Servers
Idx Server Address Port State Tout
1 10.3.121.21 49 Enabled 30
2 10.3.121.22 49 Enabled 5
Accounting Servers
Idx Server Address Port State Tout
1 10.3.121.21 49 Enabled 5
We can ping the TACACS servers...>show memory statistics
System Memory Statistics:
Total System Memory............: 1028820992 bytes
Used System Memory.............: 458424320 bytes
Free System Memory.............: 570396672 bytes
Bytes allocated from RTOS......: 21939008 bytes
Chunks Free....................: 29 bytes
Number of mmapped regions......: 45
Total space in mmapped regions.: 212779008 bytes
Total allocated space..........: 12015112 bytes
Total non-inuse space..........: 9923896 bytes
Top-most releasable space......: 133800 bytes
Total allocated (incl mmap)....: 234718016 bytes
Total used (incl mmap).........: 224794120 bytes
Total free (incl mmap).........: 9923896 bytes
show buffers
Pool[00]: 16 byte chunks
chunks in pool: 50000
chunks in use: 19030
bytes in use: 304480
bytes requested: 90479 (214001 overhead bytes)
Pool[01]: 64 byte chunks
chunks in pool: 40000
chunks in use: 14519
bytes in use: 929216
bytes requested: 566395 (362821 overhead bytes)
Pool[02]: 128 byte chunks
chunks in pool: 20000
chunks in use: 7726
bytes in use: 988928
bytes requested: 672853 (316075 overhead bytes)
Pool[03]: 256 byte chunks
chunks in pool: 4000
chunks in use: 808
bytes in use: 206848
bytes requested: 154777 (52071 overhead bytes)
Pool[04]: 1024 byte chunks
--More-- or (q)uit
chunks in pool: 15300
chunks in use: 11645
bytes in use: 11924480
bytes requested: 4945714 (6978766 overhead bytes)
Pool[05]: 2048 byte chunks
chunks in pool: 1000
chunks in use: 189
bytes in use: 387072
bytes requested: 355272 (31800 overhead bytes)
Pool[06]: 4096 byte chunks
chunks in pool: 1000
chunks in use: 36
bytes in use: 147456
bytes requested: 102479 (44977 overhead bytes)
Raw Pool:
chunks in use: 186
bytes requested: 156052303
show process memory
Name Priority BytesInUse BlocksInUse Reaper
cslStoreManager (240/ 7) 0 0 ( 0/ 0)%
System Reset Task (240/ 7) 0 0 ( 0/ 0)%
reaperWatcher ( 3/ 96) 0 0 ( 0/ 0)% I
osapiReaper ( 10/ 94) 0 0 ( 0/ 0)% I
TempStatus (240/ 7) 424 1 ( 0/ 0)% I
pktDebugSocketTask (255/ 1) 0 0 ( 0/ 0)%
LICENSE AGENT (240/ 7) 2228 85 ( 0/ 0)% I
emWeb ( 7/ 95) 1235795 20743 ( 0/ 0)% T 300
webJavaTask (240/ 7) 0 0 ( 0/ 0)%
fmcHsTask (100/ 60) 0 0 ( 0/ 0)%
apstatEngineTask (240/ 7) 0 0 ( 0/ 0)%
rrcEngineTask (240/ 7) 0 0 ( 0/ 0)%
spectrumDataTask (255/ 1) 1614480 12 ( 0/ 0)%
spectrumNMSPTask (255/ 1) 28808 3 ( 0/ 0)%
wipsTask (240/ 7) 0 0 ( 0/ 0)%
tsmTask (255/ 1) 0 0 ( 0/ 0)%
cids-cl Task (240/ 7) 0 0 ( 0/ 0)%
ethoipSocketTask ( 7/ 95) 0 0 ( 0/ 0)%
ethoipOsapiMsgRcv (240/ 7) 0 0 ( 0/ 0)%
--More-- or (q)uit
envCtrollerStatus (240/ 7) 0 0 ( 0/ 0)%
rfidTask (240/ 7) 0 0 ( 0/ 0)%
idsTrackEventTask (239/ 8) 0 0 ( 0/ 0)%
DHCP Server (240/ 7) 0 0 ( 0/ 0)%
bcastReceiveTask (240/ 7) 0 0 ( 0/ 0)%
ProcessLoggingTask (240/ 7) 0 0 ( 0/ 0)%
CDP Main (240/ 7) 3100 13 ( 0/ 0)%
sntpMainTask (240/ 7) 0 0 ( 0/ 0)%
sntpReceiveTask (240/ 7) 0 0 ( 0/ 0)%
cdpSocketTask (240/ 7) 0 0 ( 0/ 0)%
grouping Task (255/ 1) 0 0 ( 0/ 0)%
dot11a (255/ 1) 63 3 ( 0/ 0)%
rrm Socket Task ( 1/ 97) 35024 1 ( 0/ 0)%
rrm Socket Task (255/ 1) 35024 1 ( 0/ 0)%
dot11a (255/ 1) 0 0 ( 0/ 0)%
grouping Task (255/ 1) 0 0 ( 0/ 0)%
dot11b (255/ 1) 105 5 ( 0/ 0)%
rrm Socket Task (255/ 1) 35024 1 ( 0/ 0)%
dot11b (255/ 1) 0 0 ( 0/ 0)%
rrm Socket Task (255/ 1) 35024 1 ( 0/ 0)%
apfPmkCacheTimer (240/ 7) 0 0 ( 0/ 0)%
Apf Guest (240/ 7) 0 0 ( 0/ 0)%
RLDP Schedule Task (240/ 7) 0 0 ( 0/ 0)%
--More-- or (q)uit
apfMsConnTask_5 (175/ 32) 0 0 ( 0/ 0)%
apfMsConnTask_4 (175/ 32) 0 0 ( 0/ 0)%
apfMsConnTask_6 (175/ 32) 0 0 ( 0/ 0)%
apfMsConnTask_7 (175/ 32) 0 0 ( 0/ 0)%
apfMsConnTask_3 (175/ 32) 0 0 ( 0/ 0)%
apfMsConnTask_2 (175/ 32) 0 0 ( 0/ 0)%
apfLbsTask (240/ 7) 0 0 ( 0/ 0)%
apfMsConnTask_0 (175/ 32) 0 0 ( 0/ 0)%
apfMsConnTask_1 (175/ 32) 0 0 ( 0/ 0)%
apfProbeThread (200/ 22) 0 0 ( 0/ 0)%
apfOrphanSocketTas (240/ 7) 0 0 ( 0/ 0)%
apfRogueDetectorTh (175/ 32) 0 0 ( 0/ 0)%
apfRogueTask (240/ 7) 0 0 ( 0/ 0)%
apfOpenDtlSocket (175/ 32) 0 0 ( 0/ 0)%
apfRLDP (175/ 32) 424 1 ( 0/ 0)%
apfRLDPRecv (175/ 32) 0 0 ( 0/ 0)%
apfReceiveTask (175/ 32) 0 0 ( 0/ 0)%
mmMfpTask (175/ 32) 0 0 ( 0/ 0)%
mmMobility (240/ 7) 1272 3 ( 0/ 0)%
mmSSHPeerRegister (240/ 7) 0 0 ( 0/ 0)%
mmListen (180/ 30) 99920 227 ( 0/ 0)%
tplusTransportThre (201/ 22) 0 0 ( 0/ 0)%
radiusCoASupportTr (201/ 22) 0 0 ( 0/ 0)%
--More-- or (q)uit
EAP Framework (240/ 7) 0 0 ( 0/ 0)%
aaaQueueReader (225/ 13) 3518 12 ( 0/ 0)%
radiusRFC3576Trans (201/ 22) 0 0 ( 0/ 0)%
radiusTransportThr (201/ 22) 0 0 ( 0/ 0)%
pemReceiveTask (240/ 7) 0 0 ( 0/ 0)%
iappSocketTask (240/ 7) 0 0 ( 0/ 0)%
ccxRmTask (230/ 11) 0 0 ( 0/ 0)%
ccxS69Task (240/ 7) 424 1 ( 0/ 0)%
ccxDiagTask (240/ 7) 0 0 ( 0/ 0)%
ccxL2RoamTask (240/ 7) 240424 3 ( 0/ 0)%
dot1xSocketTask (240/ 7) 0 0 ( 0/ 0)%
Dot1x_NW_MsgTask_7 (240/ 7) 0 0 ( 0/ 0)%
Dot1x_NW_MsgTask_6 (240/ 7) 0 0 ( 0/ 0)%
Dot1x_NW_MsgTask_2 (240/ 7) 0 0 ( 0/ 0)%
Dot1x_NW_MsgTask_3 (240/ 7) 0 0 ( 0/ 0)%
Dot1x_NW_MsgTask_4 (240/ 7) 0 0 ( 0/ 0)%
Dot1x_NW_MsgTask_5 (240/ 7) 0 0 ( 0/ 0)%
Dot1x_NW_MsgTask_1 (240/ 7) 0 0 ( 0/ 0)%
Dot1x_NW_MsgTask_0 (240/ 7) 424 1 ( 0/ 0)%
dot1xMsgTask (240/ 7) 0 0 ( 0/ 0)%
locpTxServerTask (220/ 15) 408 2 ( 0/ 0)%
locpRxServerTask (200/ 22) 428043 1961 ( 0/ 0)%
capwapSocketTask ( 72/ 70) 303104 148 ( 0/ 0)%
--More-- or (q)uit
spamApTask6 (118/ 53) 25929 63 ( 0/ 0)%
spamApTask7 ( 53/ 78) 24233 59 ( 0/ 0)%
spamApTask5 (118/ 53) 23445 61 ( 0/ 0)%
spamApTask4 (118/ 53) 23513 58 ( 0/ 0)%
spamApTask3 (118/ 53) 19569 48 ( 0/ 0)%
spamApTask2 ( 53/ 78) 23809 58 ( 0/ 0)%
spamApTask1 ( 53/ 78) 22961 56 ( 0/ 0)%
spamApTask0 ( 78/ 68) 39189 106 ( 0/ 0)%
spamReceiveTask (120/ 52) 2204024 252 ( 0/ 0)%
spamSocketTask ( 32/ 85) 0 0 ( 0/ 0)%
Image License brok (240/ 7) 0 0 ( 0/ 0)% I
Image License brok (240/ 7) 28 1 ( 0/ 0)% I
IPC Main Thread (240/ 7) 0 0 ( 0/ 0)% I
License Client Lib (240/ 7) 96 1 ( 0/ 0)% I
sshpmLscScepTask (100/ 60) 0 0 ( 0/ 0)%
License Client Lib (240/ 7) 96 1 ( 0/ 0)% I
sshpmLscTask (100/ 60) 25783 1739 ( 0/ 0)%
sshpmReceiveTask (175/ 32) 6697 66 ( 0/ 0)%
sshpmMainTask (100/ 60) 208440 358 ( 0/ 0)%
mfpKeyRefreshTask (255/ 1) 0 0 ( 0/ 0)%
mfpEventTask (255/ 1) 0 0 ( 0/ 0)%
mfpTrapForwardTask (255/ 1) 0 0 ( 0/ 0)%
clientTroubleShoot (100/ 60) 2841248 4 ( 0/ 0)%
--More-- or (q)uit
loggerMainTask (200/ 22) 0 0 ( 0/ 0)%
debugMainTask (200/ 22) 0 0 ( 0/ 0)%
dot3ad_lac_task (240/ 7) 32901 3 ( 0/ 0)%
gccp_t (240/ 7) 5864 5 ( 0/ 0)%
dot1dTimer (240/ 7) 0 0 ( 0/ 0)% T 300
dot1dRecv (250/ 3) 0 0 ( 0/ 0)%
uart_session (240/ 7) 0 0 ( 0/ 0)%
StatsTask (240/ 7) 0 0 ( 0/ 0)%
fdbTask (240/ 7) 0 0 ( 0/ 0)%
broffu_SocketRecei (100/ 60) 13 1 ( 0/ 0)%
SNMPProcMon (240/ 7) 0 0 ( 0/ 0)% T 300
RMONTask ( 71/ 71) 0 0 ( 0/ 0)% I
SNMPTask (240/ 7) 61089 1064 ( 0/ 0)%
DHCP Socket Task (240/ 7) 0 0 ( 0/ 0)%
DHCP Proxy Task (240/ 7) 0 0 ( 0/ 0)%
dhcpClientTimerTas (240/ 7) 0 0 ( 0/ 0)%
DHCP Client Task (240/ 7) 0 0 ( 0/ 0)% T 600
BootP (240/ 7) 0 0 ( 0/ 0)% T 300
TransferTask (240/ 7) 848 2 ( 0/ 0)% I
osapiTimer (100/ 60) 13024 2 ( 0/ 0)% T 300
nim_t (100/ 60) 2447 3 ( 0/ 0)%
dtlArpTask ( 7/ 95) 98436 3 ( 0/ 0)%
dtlTask (100/ 60) 41089 20 ( 0/ 0)%
--More-- or (q)uit
dtlDataLowTask ( 7/ 95) 0 0 ( 0/ 0)%
sysapiprintf (240/ 7) 22657 3 ( 0/ 0)%
osapiBsnTimer ( 95/ 62) 0 0 ( 0/ 0)%
fp_main_task (240/ 7) 153068796 26868 ( 0/ 0)% -
M1522 nf scanner is not working for windows 8.1
till windows 7 scanner & printer is working.
windows 8.1 scanner is not working.
i tried all the softwares in page http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=3442754&spf_p...
please update your softwares that are not working for windows 8.1Hello Nani134,
To get your issue more exposure I would suggest posting it in the commercial forums since the HP LaserJet M1522nf is a commercial product. You can do this at HP Enterprise Business Community.
The support page for your product may be helpful in the meantime:
HP Support Center.
I hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
"Include Header Row in Subsequent Pages" is not working for table
Hi,
I'm using version 8.1.2.3337.1.509884.
The pagnation feature "Include Header Row in Subsequent Pages" is not working for any table in my design. ( the check-box can not be checked no matter how many times I clicking it)
I put such table already in a flow bodypage.
Any similar issue reported?
Any suggestions?
Thanks.
-VickyHi Raghu,
Appologies that I uploaded a wrong version of xdp file yesterday.
Here is the correct one.
https://acrobat.com/#d=jr0XffvBZWXd0cVhL0OQ3A
I totally understand that I have to check the checkbox "Include Header Row in Subsequent Pages".
My problem is that, although I can see that checkbox, and it's not grey-out, I can not tick it. See below screenshot, with the red-cycle mark.
You can try with above file.
Just wondering why such weird behavior happened.
-Vicky -
Lion Server DNS service not working for locally created zones. Caching working fine.
OS Lion Server DNS service not working for local zones. Was fine under Snow leopard server but Lion server upgrade has severely broken my DNS and web sites. Zones look fine under Server Admin but keep getting "query failed (SERVFAIL) for xxxx at /SourceCache/bind9/bind9-42/bind9/bin/named/query.c:3921" in the logs. BTW - Server Admin cant seem to see the log file either.
Surely someone actually tested that DNS still worked on Lion?I upgraded from Snow Leopard Server to Lion Server on day 01. I hit the same issue where, after the upgrade, my Lion Server stopped serving names for my private local domain.
I finally took a few minutes to figure out what was wrong. After turning on debug logging and looking through the logs, I found my particular issue, now resolved.
The issue I had was, when the domain initially was setup when I installed Snow Leopard Server, for some reason it created a zone just for the server (in my case, something like zone "s-01.mydomain.priv"), and a separate zone for all the other machines (zone "mydomain.priv", containing all the private IPs for my local domain). I never messed with it because it worked, but generally I would have put all of them in the same zone.
My zone "mydomain.priv" had a nameserver and mail exchanger entry for my server, s-01.mydomain.priv. I could see this in the Server Admin app on the DNS bubble, Zones tab, mydomain.priv selected, and the General Info panel. This was fine in Snow Leopard. This was failing the zone load in the updated bind for Lion Server, though. The issue was that the "mydomain.priv" zone was referencing the s-01.mydomain.priv server, which was not defined in the "mydomain.priv" zone but rather in the "s-01.mydomain.priv" zone.
My fix:
1. In Server Admin, add the server to the zone "mydomain.priv". I put an A record (Add Machine) in the "mydomain.priv" zone for my server named s-01.mydomain.priv.
2. shut down DNS on the OS X Lion Server (hit the Stop DNS button on Server Admin).
3. edit /etc/named.conf by hand, removing the specialized zones that contianed just the server. In this case, it would be the section titled 'zone "s-01.mydomain.priv"' and the section titled 'zone "3.10.1.10.in-addr.arpa"'. Your in-addr.arpa zone name will change based on whatever your server IP address was. My internal one happened to have s-01.mydomain.priv mapped to 10.1.10.3.
4. Once the specialized zones for just the server were removed, I started the DNS up again. Instead of serving four zones as it had in OS X Snow Leopard Server, it now servers two zones. And, now, it is resolving my local machines for the mydomain.priv zone.
YMMV. I did note that it wasn't totally necessary to do step 3, but I never really understood the need for the specialized domain, and keeping it around would have a copy of data that would just confuse things.
Hope that helps. That's been the only hiccup I've noticed updating to OS X Lion Server thus far. -
SPSecurity.RunWithElevatedPrivileges Not Working for Read Only Permissions Users
I have the following code in a method that generates tabbed web parts on any page in SharePoint 2010.
The problem is that it will not work for users who have Read access only on a SharePoint site. It will work when those users have Contribute access.
So even though I have elevated permissions in the code it does not actually elevate the permissions at the point where it is needed.
if (panel != null)
try
using (SPLimitedWebPartManager wpManager = SPContext.Current.Web.GetLimitedWebPartManager(HttpContext.Current.Request.Url.ToString(), PersonalizationScope.Shared))
try
// Elevated previleges required for EXPORT and IMPORT. Else Users with normal read access will get errors.
SPSecurity.RunWithElevatedPrivileges(delegate()
// Retrieve the web part titles in the ConfigureTabs XML string for this tab.
var webPartTitles = from t in xDocument.Descendants("webPart")
where (string)t.Parent.Attribute("name") == (string)e.Item.DataItem
select (string)t.Attribute("title");
foreach (string wpTitle in webPartTitles)
foreach (System.Web.UI.WebControls.WebParts.WebPart webPart in wpManager.WebParts)
// Find the matched closed web part in WebParts collection
if (webPart.Title == wpTitle && webPart.IsClosed == true)
string errorMessage;
//ADD EXPORT PROPERTY
webPart.ExportMode = WebPartExportMode.All;
MemoryStream stream = new MemoryStream();
XmlTextWriter writer = new XmlTextWriter(stream, System.Text.Encoding.UTF8);
// Export the closed webpart to a memory stream.
wpManager.ExportWebPart(webPart, writer);
writer.Flush();
stream.Position = 0;
XmlTextReader reader = new XmlTextReader(stream);
// Import the exported webpart.
System.Web.UI.WebControls.WebParts.WebPart newWebPart = wpManager.ImportWebPart(reader, out errorMessage);
reader.Close();
writer.Close();
// Show the imported webpart.
panel.Controls.Add(newWebPart);
break;
catch (Exception ex)
// For debugging use only.
Label label = new Label();
label.Text = "Please check your XML configuration for error. " + Environment.NewLine + ex.Message;
panel.Controls.Add(label);
catch (Exception ex)
// For debugging use only.
Label label = new Label();
label.Text = "Please Check SPContext.Current.Web is not null. " + Environment.NewLine + ex.Message;
panel.Controls.Add(label);
This snippet of code was originally pulled from a microsoft technet article on creating Tabbed web parts "the correct way" but it doesn't work in all scenarios.
Is there a way to get this code working for Read/Visitors to a SharePoint site?From initial observation what I see is that your SPLimitedWebPartManager is not created from an elevated web. Try like below
SPSecurity.RunWithElevatedPrivileges(delegate()
using(SPSite elevatedSite = new SPSite(SPContext.Current.Site.ID))
using(SPWeb elevatedWeb = elevatedSite.OpenWeb())
using (SPLimitedWebPartManager wpManager = elevatedWeb.GetLimitedWebPartManager(HttpContext.Current.Request.Url.ToString(), PersonalizationScope.Shared))
{ //Rest of your code
Geetanjali Arora | My blogs | -
Totale Rosetta not working on iMac
I recently purchased Totale Rosetta for Italian which is not working for me. The initial video window has no video in it. When I select any of the available menu options (Headset Setup, Users Guide, Rosetta Stone Total E Videos, etc.), I get blank white windows with no content. Plus, the acess is incredibly slow. I have no problems with any other applications on my desktop, which is an IMac, OS X Lion Version 10.7.5 with 16GB Memory. Any suggestions?? Thanks in advance!
Well, yes, I know that Quicken is not a Universal binary (that is unfortunate). But by all accounts and articles the application should run under Rosetta, yes? (Even says so in that Macworld article.)
That's the actual problem I'm having -- The installer will not run. Nor will the program itself. I don't have any other PowerPC apps on the machine to try them out and check if others are working but I'd assume they're not. -
I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?
Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.
-
IPhone 6 External Mic not working for Siri/Dictation
I am finding that the external mic on my iPhone 6 works for phone calls and voice memos, but does not work for Siri/Dictation. When I plug in the earbuds, they work for everything (including Siri/Dictation).
Was chatting to Apple support who had me reset all settings. I thought that worked, but realized that after a reset, Siri is off and I was talking to "Voice control" (which works). When I turned Siri back on, it does not work.
I have two questions for the community to see if you can help:
1- I have been assuming this must be a software problem since the mic does work for non-Siri access. But is that true? Is there a hardware component that Siri depends on which could be faulty here?
2- If it is software, what action should I try to address it? I have done a reset all settings already and that did not help.
DougHi, everyone. I talked to Apple Genius at Apple Store last week, she said it should be a software issue and I needed to reset my iphone 6 plus as a new device and I can not use the backup restore from my iCloud, it was because the microphone bug or glitch can be in the backup also. Ok, followed her advice, erased all contents and set my iphone as a new device , the microphone worked for an hour, but went bad again. I used "voice memo" app from Apple to test the microphone. It is the best tool since it doesn't involve any provider's network and it doesn't need another person's phone to listen and test. If you can hear your voice recording clearly, then the mic works. I tested it 3-4 times a day for a few days now, half of the time the mic doesn't work. So, set as a new device isn't working. The issue is intermittent and it comes and goes as it likes, so very annoying. I carry my Apple EarPods with me in these past few days ust in case I need to make important phone calls. Will need to go back to Apple Genius this weekend for sure. Will give update after the weekend.
-
CALLER ID not working for International incoming calls
Hi,
I've a strange issue where CALLER ID not working for International incoming calls, it shows INTERNATIONAL UNKNOWN NUMBER in the phone display, but the number shows correclty in Verizon Call assistant !!!
Any clue?yashshankar wrote:
Hi
I recently purschased an Online number but the caller id does not work for incoming calls.How do we resolve this problem?.
Regards
Yash
You didn't mention what country your Online Number is in. Not all of Skype's Online Numbers are eligible for use as Caller ID when calling telephones or sending SMS messages. If your number is from one of these countries (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US), then it can be used this way. Otherwise, you can use a mobile number from countries other than Japan or Mexico as Caller ID with Skype, after the number goes through a verification process where Skype sends SMS messages with codes to that number.
To get to these settings, log into your Skype account here on the Skype web site using the "Account" link at the top of this page. You'll see a screen that would include your current Caller ID settings, and a link to change that. If your Online Number is from one of those countries I referenced above, just select it and you're done.
Hope that helps!
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype. -
Select All in a table does not work for Drag and Drop
Hi. I am using Jdeveloper 11.1.1.2 but have also reproduced in 11.1.1.3.
I am trying to implement drag and drop rows from one table to another. Everything works fine except when I do a Select All (ctrl-A) in a table, the table visually looks like all rows are selected, but when I try to click on one of the selected rows to drag to the other table, only the row I click on is dragged.
I tried setting Range Size -1, fetch mode to FETCH_ALL, content delivery to "immediate" but nothing works.
I even have reproduced not using a view object but just a List of beans with only 5 or 10 beans showing in the table.
Does anyone know how to get Select All to work for a Drag Source?
Thanks.
-EdFrank-
OK, thanks for looking into that. I also submitted this service request, which includes a simple sample app to demonstrate the problem:
SR #3-2387481211: ADF Drag and Drop does not work for rows in table using Select All
Thanks again for the reply.
-Ed -
Form Designed in LiveCycle will not work for End User
Please Help!
I am a newbie to Adobe LiveCycle but recognized the utility in the program, so decided to give it a while to try and streamline some of my employer's forms. After spending too much time learning how to design a form (much to the dislike of my boss), I am finally going to have to ask for some help. So here's the deal:
I've designed a dynamic pdf in LiveCycle with two master pages and two repeating flowed subforms. The first repeating subform is basically an expanding table intended to be used as a photographer's log where they can log each photo taken with the camera. The expanding table has some code with a button at the top for the end user to enter the number of photos on the photo roll, click submit, and table expands to however many instances of rows are needed for each photo that was taken. The second subform is basically an image field and text fields used as photo captions/photo compilation pages. When the end user clicks submit on the first subform to expand the table, I also have javascript in that click event to also create same amouint of instances of the second subform (the photo compilation page(s)). Each text field for the photo caption on the second subform is populated by the data entered into the photo log table cells. I was able to find a script to correctly populate those fields for each instance of the table. Wish I had the form here, but it's at work at the moment.
My problem is this: I've scratched and clawed to get all of the forms expanding correctly and the scripts populating each instance of the fields correctly and everything works great in LiveCycle preview. I then saved the form as PDF for use by my field crew personnel (whom all use, at the very least, Adobe Pro 9, but most Pro X). I sent the new form to them and they move it to their desktop, open it with Adobe Pro, and populate all of the fields and everything works swimmingly. However, once they save it, it gets all jumbled and they can't even print it. We even thought we found a workaround by entering all data and printing to PDF, but even that has turned out to not work. I checked to make sure that I designed and saved the form in LiveCycle for use with the Adobe Pro versions, but still not working for my end users.
Anyone have any thoughts on my long explanation?? Please HELLLLPPPP!The error(s) occur when trying to save the document. I want each user to tell the first page how many rows they will need in the photo log table, so they would enter however many photos were taken in the box: "Number of Photos on Roll:" ---> Then click the "Submit" cmd button. That should expand the table. Once it expands, it should also add the same amount of instances of the photo compilation page (2nd Page) as there are rows in 1st page table. Then the user will populate each cell of the table on page 1 with data. The data entered into the page 1 table cells will populate the text fields (photo caption) in Page 2 once the user clicks on the "Populate Captions!" cmd button in the lower left corner of the table on Page 1.
The problem is in the distributing of the form to the user so they can save the form after populating the data. I did a test run this morning and for some reason it did do the "print to PDF" correctly for 5 photos on the roll (though this has not been happening every time and especially for a large number of pages, ie. 80 photos). However, after entering the data for 5 rows on page 1 and then populating the 5 photo compilation pages, I saved a copy as "Save As PDF" and closed the document. Then re-opened the copy in Acrobat Pro X. The new copy:
-had 5 additional rows added to Page 1
-Duplicates of some of the fields
-Only retained the 1st instance of the Second Page (Photo w/ Caption) and not all fields were populated
Again, this all works fine in the LiveCycle Preview but not anywhere else. I do not have this set up to be linked to an external data source (YET) but there is javascript in the cmd buttons. I also do not want to distribute this form to end users and then collect the data back from them. I want them to be able to save a copy of my LiveCycle designed form, open in Adobe Pro, populate the data and save as many copies as needed for form production.
Maybe you are looking for
-
To find out the list of user profiles marked for deletion using powershell or C# for SharePoint 2010
I have Disabled the MysiteCleanup timer Job and disabled few user profile accounts in AD. Then in SharePoint user profile service, ran the User profile full synchronise job. I am able to find the marked for deletion records from the table (UserProfi
-
Solaris 8 installation in Dell 8100 met "Resource Confilict"
Hello There, During I installated Solaris 8 in Dell Dimension 8100, I received the warning message: "Resource Conflict: both devices are added. NON-ACPI device:PNP0c01 Port 800-8DF, C00-C7F; Memory FFB00000-FFFFFFFF ACPI device:PNP0C01 Memory: 9FC00-
-
Downloaded PSE 9, photo mail stopped working in PSE 7, help!
With some trouble I was able to download trial version PSE 9. I already had PSE 7. I attempted to e-mail pics using photo mail in PSE 9. I had to select e-mail system and it would send a confirmation number. No number arrived. Went back to PSE 7
-
HT4528 Is there any way to change the contact email?
Is there any way to change the contact email? I had deleted my contact email without even a thought about my Apple ID. Any suggestions? <Re-Titled By Host>
-
Hi all, since I started to use Aperture I preferred to do not import the master files in the Aperture library, but just today I thought: which is the best solution in terms of hard disk volume and speed? If I decided to copy all the master files in t