Match WIP_JOB_STATUS to system_status type

Hi
I have a req where I am supposed to add a new status type to jobs
eg new status name eg disconnect ( system_status complete).
I know the first part's easy I just add the new status type to the lookup WIP_JOB_STATUS
Thats easy to do.Whats also mentioned is the system_type of the job_status.
There is another table column apps.eam_work_order_details.user_defined_status_id.
Is there a way to connect a status type from WIP_JOB_STATUS to the system status.
I think they are both from the same lookup but was wondering if there is a table that connects the two.
so a certain status type (eg disconnect) can be set only for a certain system status (complete)
Thanks
D

Hi
Just an FYI for anyone else looking at this
insert records in the eam_wo_statuses_b and eam_wo_statuses_tl
coupled with new entries in the wip_job_status lookup type will do the trick.
D

Similar Messages

Paper detected does not match paper size or type selected

Says paper mismatch! Paper detected does not match paper size or type selected. I have a 6600. Can some help?

Hi,
Try updating the printer firmware, the latest version should improve its paper handling.
Follow these steps to get the latest update for the printer and then check for any differencex:
http://support.hp.com/us-en/product/HP-Officejet-6600-e-All-in-One-Printer---H711a/H711g/4322968/mod...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Hp pro 8600 error Paper detected does not match paper size or type selected .

hp pro 8600 error "Paper detected does not match paper size or type selected" for Copies from tray one . There has been no change in the paper always used in tray one. Prints documents with no problem from Tray One with same paper. Copies from Tray 2, same paper, no problem. Have restarted the printer, same error. When I try to copy using Tray one, the to be copied document does not feed, and the printer kicks out a blank page using Tray One Paper.

Hello marathonmama,
Welcome to the HP Forums.
I see that you are having an issue with a Paper Mismatch error on the printer.
Please click the following link that deals with an HP Single-Function and Multifunction Printers - 'Paper Mismatch,' or 'Paper Size Mismatch' Error Mes....
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Error the entered value does not match the specified field type

Hi,
When I try to insert a null value to a field of the User Defined Table I am getting the error "The entered value does not match the specified field type" in SAP Business One version 2007 PL 42.
Any help would be appreciated.
Thanks in advance.
Sudha.

Hi Sudha,
It probably have to do with how you defined the field.
Is Null value allowed?
What are the field definitions?
Thanks,
Jesper

PhotoSmart3210 All in one "Paper detected does not match paper size or type selected."

All of a sudden i cannot copy any document with my 3210 All In One. I keep getting the message shown above on the screen.

Hi @nunzio317
I would like to help you with your Photosmart 3210. I understand that when you copy you see a message on the printer that says "Paper detected does not match paper size or type selected". Does this also happen when you print from the computer, or only when you copy? Have you tried copying a different size paper, and what size paper are you currently using?
Are you able to print a self test report? If you are unsure, please try, and let me know;
Load plain white paper into the tray.
Press the Setup button.
Press 1 to display the Print Report menu.
Press 1 again to select Self-Test Report. The self-test report prints.
- Source
If this also happens when you print from the computer, please use the following document as it can help you to resolve the issue; 'Paper Mismatch,' or 'Paper Size Mismatch' Error Message Displays When Printing.
I hope this helps.
- In support of Movember
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

OB048 - ED Status from valuation type does not match ED Status handling type TE

Hi,
Good day!
We have experienced an error message (# OB048) indicating that ED Status from valuation type does not match ED Status handling type TE. I have already checked configuration under Tariffs, Duties, and Permits of the Industry Solution Oil & Gas (Downstream) and the following were in order:
1. Excise Duty Group
2. Excise Duty Status
3. Set Handling Type
4. Set Pricing Indicator
5. Maintain excise duty/tax status/account determination
6. Maintain handling type/tax status
May I know what can be the solution to this error message considering that the above configurations were already accomplished.
Thanks in advance.
Regards,
Vensim
Note: Attached is the file with screenshots of the error message. FYR.

EdStevens wrote:
856483 wrote:
<snip>
can i have you mobile contact phone number if possible?
I have seen some pretty astonishing requests on this board, but this one really raises (or lowers) the bar. Just what is it your boss is paying you to do?
Some listserves have lots of people giving their number. I find it odd that people would, but not astonishing for someone to ask. Outside the norm here, but how would someone know ahead of time? It's a bravely connected new world.

Sender File/FTP Adapter - Matching Input to Message Type

Hi,
I have a sender file/ftp adapter which is using content conversion to generate an XML document from the contents of a text file. This works fine and when I go into the SXI Monitor I can see the XML document I expect:
<ns:DN_360BalanceExtract xmlns:ns="http://xxx">
<ns:RN_360BalanceExtract xmlns:ns="http://xxx">
<BalanceRecord>
   <SerialNo>xx10000780</SerialNo>
   <RegNo>A1</RegNo>
   <LocationTicketIssued>ALBERT ROAD SOUTH</LocationTicketIssued>
   <DateOfOffence>2008-02-15</DateOfOffence>
   <TimeOfOffence>13:38</TimeOfOffence>
   <OffenceDescription>xxx</OffenceDescription>
   <CurrentStateOfCase>RE-OPENED; CLOSED IN ERROR</CurrentStateOfCase>
   <OutstandingBalance>70.00</OutstandingBalance>
   </BalanceRecord
<BalanceRecord>
   <SerialNo>xx90001245</SerialNo>
   <RegNo>S849KMR</RegNo>
   <LocationTicketIssued>ALBION PLACE</LocationTicketIssued>
   <DateOfOffence>2011-03-01</DateOfOffence>
   <TimeOfOffence>10:59</TimeOfOffence>
   <OffenceDescription>xxx1</OffenceDescription>
   <CurrentStateOfCase>xxx</CurrentStateOfCase>
   <OutstandingBalance>60.00</OutstandingBalance>
</BalanceRecord>
</ns:RN_360BalanceExtract>
</ns:DN_360BalanceExtract>
Having created the XML document from a text file I now wish to use the XML as input to a web service. This will of course involve mapping the XML document to a message in the inbound interface. Question is how do associate the XML generated with a Message Type in the outbound interface. Do I need to make sure the Document or Recordset names match that of a Message Type ?
Cheers,
PaulC.

Hi Paul
The content conversion will create a document like that if you insert DN_360BalanceExtract as Document name, "http://xxx" as namespace.
RN_360BalanceExtract will probably be your recordset, with its namespace.
More information about content conversion on sender file adapter:
http://help.sap.com/saphelp_nw04/helpdata/EN/ae/d03341771b4c0de10000000a1550b0/frameset.htm
I'm not sure what you mean by bound. If you mean that PI has to execute mapping you created for that DN_360BalanceExtract message type, you need to associate DN_360BalanceExtract to a message interface and then create all configuration objects and choose that message mapping when you create the interface determination object.
Regards,
Giuseppe

11.1.1.4:Could not find the item selected to match the value of type Number

Hi,
I have a taskflow with an input parameter.
The input parameter value is to be assigned to a list item as the default selected value.
I have mapped the pageFlow scope parameter to set value to the list item using input page parameters defined in task flow.
but When i Run the task flow the value does not get assigned to the drop down list and jdevloper console screen shows up the following message
"Could not find the item selected to match the value 2 by type: oracle.jbo.domain.Number in LOV."
But If I click the Lov to check the values it shows that value is present in the list.
The same configurations works if the list of values is for a column with type as java.lang.String.
Is it somethng different that is to be done for a Number field to assign value from a taskflow parameter?
Edited by: user3067156 on Jun 25, 2011 3:34 PM

Hi Jobinesh,
I am assigning the default value in the task flow using input page parameters ...
<view id="VIEW1">
<page>/title.jsff</page>
<input-page-parameter>
<from-value>#{pageFlowScope.pInputTyp_Id}</from-value>
<to-value>#{bindings.pTyp_Id1.attributeValue}</to-value>
</input-page-parameter>
</view id>
It does not assign the value, if Bind variable(pTyp_Id1) NDtype and task flow input parameter(pInputTyp) class type, both are set to use type oracle.jbo.domain.Number.
If I change both to use java.lang.String and additionally also change the VO defination the accept the bind variable of type string, it assigns the value correctly.
Usecase:
I have a a task flow for which has its first page a search page.
The Search page is created using operation execute with params and dragging the query parameters on the page.
The Query parameters are to be filled using a select one choice option and the list is bound to the master values.
This task flow can be used inside a standalone page as a region to provide a search page
The same task flow can be called from within another taskflow which will provide the default values for the drop down lists ..
Since the search page is a jsff fragment i dont have a page on load handler to provide default values..
So assiging the values using input page parameters defined in task flow view tag.
For testing I am passing the taskflow input parameters by calling the task flow from a jspx page a region . When I configure this task flow a region in a page its asks for providing the values for the parameters
And the same gets configured in my testpage def as
<executables>
<variableIterator id="variables"/>
<taskFlow id="Flow1" taskFlowId="/WEB-INF/Flow1.xml#Flow1"
activation="deferred"
xmlns="http://xmlns.oracle.com/adf/controller/binding">
<parameters>
<parameter id="pTyp_Id" value="1207"/>
</parameters>
</taskFlow>
</executables>
Edited by: user3067156 on Jun 27, 2011 1:50 PM

Bringing back results that match a certain character type

Hi, thank you for any help.
Below is a few values from a field in a database table. I like to bring back the values that only have ###-####. I do not want to bring back any other values that has any other kind of characters in them unless its a number. Thank you
I want to bring back only
105-1110
105-1114
105-1121
105-1125
105-1298
105-1300
I dont want to bring back the ones below.
001-10
001-2-13
002-2-10
003-43
003-52
003-87
0820-FR
1-0-17
1-0-18
1-0-19
1-0-20
1-0-22
1-0-29
1000-SW
1030-SW
105-CIFM
Edwin Lopera

One option
declare @table table(val varchar(10));
insert into @table
values
('105-1110'),
('105-1114'),
('105-1121'),
('105-1125'),
('105-1298'),
('105-1300'),
('001-10'),
('001-2-13'),
('002-2-10'),
('003-43'),
('003-52'),
('003-87'),
('0820-FR'),
('1-0-17'),
('1-0-18'),
('1-0-19'),
('1-0-20'),
('1-0-22'),
('1-0-29'),
('1000-SW'),
('1030-SW'),
('105-CIFM')
select * from @table
where val like '[0-9][0-9][0-9]-[0-9][0-9][0-9][0-9]'
Satheesh
My Blog |
How to ask questions in technical forum

Getting error when view - Requested data type does not match with existing

I have the siebel web service
In the BI publisher as mentioned in the 'Siebel_BI_Publisher_Integration_Concepts.pdf', I have imported the siebel web service
BI can recognize the 'Web service' and methods.
I have created the paramters. The data type is 'String'
When I try to view the report using the BI publisher, I am getting teh following error in th UI
"Requested data type does not match with existing data type"
This is the first time I am using BI publisher to call the Siebel web service. I don't know what this error means
I don't know whether any log file generated wit the details of this erro message
Any help is much appriciated
Thanks,
Kavitha

Hi all,
have you find a fix for this issue? Im facing the same situation, using Complex type, and String data type both in the service and Bi publisher. We are consuming CC&B services, and we have noticed this error appears when BIPublisher is running on WebLogic (10.3) but it does not appear when BIPublisher is running on OC4J , of course running the same report on both application servers.
Any idea?
Thanks a lot, regards
Nestor

ERROR ITMS-9000: "File given does not match type JPEG ... Image is likely corrupt

Hi ALl,
On compliing my book get these errors with ITunes producer...I've resaved the files out with photoshop and they seems fine?
Package Summary:
1 package(s) were not uploaded because they had problems:
          /Users/Umran/Music/iTunes Producer/Playlists/9780957408654.itmsp - Error Messages:
                    Apple's web service operation was not successful
                    Unable to authenticate the package: 9780957408654.itmsp
                    ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@1cf629f[userString=An unknown error occured while parsing. Image is likely corrupt. Exception message: null]" at Book (MZItmspBookPackage)
                    ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@1801285[userString=We reached the end of the file before we expected. Image is likely corrupt]" at Book (MZItmspBookPackage)
                    ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@1e056e9[userString=We reached the end of the file before we expected. Image is likely corrupt]" at Book (MZItmspBookPackage)
                    ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@11d58e0[userString=We reached the end of the file before we expected. Image is likely corrupt]" at Book (MZItmspBookPackage)
                    ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@127c00e[userString=We reached the end of the file before we expected. Image is likely corrupt]" at Book (MZItmspBookPackage)
                    ERROR ITMS-5107: "VirtualLandscapesTheModernEra20002012.epub: Fixed-layout books must supply a text or bodymatter starting location in the guide." at Book (MZItmspBookPackage)
Any advice??? Hope someone can help!

iBookstore Publisher Support send me a fast response email which included some helpful info:
Please make sure that all image files inside the ePub end with one of the following: ".tif", ".jpg", or ".png" and that the file itself matches the file extension type. To check if the image file matches the file extension type, please right click on the image then select "Get Info". Once the info tab appears, please make sure that the file extension type of the image file matches the "Kind" found under "General".
For further information regarding embedded images, please refer to the iBookstore Asset Guide, which is available for download in the Deliver Your Content module in iTunes Connect.
And they INCLUDED THE TRANSPORTER LOG (!), the log generated by iTunes Producer as it tries to upload a book. We were able to search for the Validation Error # within the log and find out which image Producer was trying to upload when it encountered an error. Turns out the problem was a corrupted screenshot jpeg.
Grateful!

Pricing condition types in SRM 7.0

Hi,
We are using SRM 7.0, we have decided to go ahead with the pricing proceedure and the condition types which are there in ECC the same should be replicated to SRM.
We have created the same pricing proceedure and the calculation scheema in SRM.
Now my requirement is when i create a PO with the conditions and when i am transfering to ECC the PO should also be with the condition types. It should be a similar PO in ECC.
Is this can be addressed.

Hello All,
As I have already mentioned the condition types in SRM are identically matched to ERP condition type hence the data is flowing correctly and even the idoc has the z-condition type Z123.The IDOC in backend ERP has status 53.
On trial and error method we did unchecked the manual indicator check in the pricing schema for the relevant condition type and because of that now the Z-condiiton type can be seen in the backend ERP contract.
If the indicator was checked, this means that this condition can be maintained only manually (directly in the transaction
ME32K in ECC) and nothing can be transfer from other source.
Note: If the same condition type is being used in more than one pricing procedure then ensure that the check bok is unchecked for agianst the relevant condition type.
Thanks,
Yatin

Expression must return the interface type in Transformation Step in BPM

hi,
We are getting below while activating the IP,
Expression must return the interface type SI_Send_AA
Expression must return the interface type SI_Get_AA
No semantic errors found
We have a Transformation Step in BPM,
In OM, Source is SI_Send_AA and Target is SI_Get_AA
Also Container variable points to the same Abstract SI's.
Few Thread's for Same are error are:
Error in BPM
expression must return the interface type
Transformation step in ccBPM scenario
Error while compiling Business Process
Even after checking these i am getting this Exception.
Please Help!
Thanks,
Mayank

Also Container variable points to the same Abstract SI's
Are you sure that you are using Abstract Message Interfaces only and that these are referring to relevant container variables.
Normally it happens that there is some mis-match between the message types/ interfaces that we use in the mapping and that we use in the BPM.
If still not solved, then delete the Transformation step --> save --> activate......then again Edit the BPM to include the Transformation Step.
Regards,
Abhishek.

Assign Type conflict error

Hi,
I am trying to load the data from PSA to write optimised DSO in production and it is throwing me an error 'Short dump :Assign Type conflict error".
I have no routines in the transformations.Source data types are matching with target data types.
Is there any way I could resolve this issue.
Thanks,
Chandra

Hi,
I had this problem when i was loading the sales cube. the problem was UOM was not maintained in the system. Then I maintained UOM in the bi and solved the issue. JUst check if your data from the source has got the master data in bi.
Thanks
Srikanth

Custom result type does not appear in search result

I've got some document libraries containing technical documents, across a few team sites. I'm trying to customize the search results so that the document type shows up in the results. Using
this example as a guide, here's what I've done so far:
Created a term set called "Document Type" with 4 terms: "Built", "HowTo", "Kb" and "Forms".
Created a site column called "Document Type" using the term set as the source
Added a column to my document libraries using the site column
Did a crawl
Looked up the Managed Property name (It's called "owstaxIdDocumentx0020Type").
Made a copy of the Item_Dafault files in Display Templates, renamed it DocType.html and .js
Edited the new file:
       - Renamed title to "Document Type"
       - Added 'owstaxIdDocumentx0020Type':'owstaxIdDocumentx0020Type'
       - Added _#=ctx.CurrentItem.owstaxIdDocumentx0020Type =#_ as indicated in the example.
Updated the result types
Made a copy of the "SharePoint List Item" result type with settings as follows:
       Name: Document Type
       Match "All Sources" of type "SharePoint List Item"
       Properties to match "owstaxIdDocumentx0020Type" equals any of... "Built", "HowTo", "Kb", "Forms"
       Results should look like "Document Type" (i.e. points to the new display template file above)
Saved and went back to the Search Center. Typed in the name of a file I know has a specified "Document Type" value. It comes up in the results, but all results seem to be displayed using the default template.
So where did I go wrong? Did I miss a step somewhere?

First test your template works, change the matching rule so that everything matches. That'll prove that the template itself is valid rather than the matching rules.
I suspect that your issue is in the rules. Bella's guide is fantastic but there is one difference that's worth mentioning, the guide is for a list item rather than a document. The two are subtly different.

Match WIP_JOB_STATUS to system_status type

Similar Messages

Maybe you are looking for