Matching issue in Data Manager

Hi All,
We are having an issue where we have customer number maintained as both with and without leading zeroes like as 123 and 00123.
If we run the matching strategy we get as None as it is considering those as different value.
Is there some way so that it neglects only the leading zeroes and not all the zeroes in it or is there some other way .
I cannot use only 0 in substitution as after transformation it considers 10234 and 12034 as same a
Please if anyone can need input in this.
Thanks and Regards
Nitin

Hi Ravi,
Thanks for the reply.
But the issue ia mainly maintaining the field value with leading zeros and converting all the value to leading zero values.
Is there a way so that a field can be created as suggested by you so that any value it gets the newly created field has the correct value.
For example : If i import the record with number 10 the newly calculated field should have value maintained as 0010 and also can we specify/fix the length.
If not the only thing i can see is to update the tuple.But i tried this also but i am facing with all the main table value getting changed to blank if i give as replace
Nitin

Similar Messages

Transformation in matching mode in data manager

Hi ,
Can anyone tell me when should we do trasformation in data manager (matching mode)? How can we do it?
Can any one provide me example?
Thanks

Hi,
   Transformations is a first step that we need to do in matching and merging process in MDM data
   manager to eliminate the duplicates.
Generally the same data in different remote systems will be maintained differently according to their
naming conventions, but it does n't allow us to do deduplication in data manager.
We need to normalize the data in specific format so that we can go for deduplication on a specific field.
   To create transformation ,
   Select transformations tab in data manager
   Give name for transformation.
   Select the field on which you want to apply transformation.
   Create the substitutions .In substitutions we have From means original data and To means destination
   data and Token means whether source data has to be converted in token wise or not.
   After that create rule and include transformation there.
Hope it helps,
Reward points,if found useful
Cheers,
Narendra.M

Connection Issues MDM Data Manager using Vista

Hello
I am trying to connect to the MDM Data Manager(v 5.5) and get a message "Cannot Connect to MDM Server". My colleague is doing the same thing and it works for him. The only difference is that he is on XP and I am on Vista.
Is there something which I need to do from my side to make it work from Vista ?
Appreciate your help.
Thanks
Bhavin

Hi,
There are additional patches you need to install for working on Vista. This is the file name - "MDMGC55006P3HF_10-10003297" you need to download from SMP and install them on your local machine for all the clients namely console, DM,IM,Syndicator.
After instaling this, it'll surely work.
Manish

Data Manager: Transformations( Matching Mode)

Hi All,
In Matching mode of data manager, I set some transformation. In preview field of transformation tab, data is changing as per in substitution.
But after merging it is not reflecting into the data( what I set in substitution, is not reflecting into the data).
What I have to do for this? Any other settings?
Please help....
Regards,
Nikhil

Hi Nikhil ,
You could use assignments in this case and build it accordingly :
in the DM ->assignments tab -> add an assignment -> give a it a name -> and in the assignment field tab click the ... that appears , this opens the assignemtn builder now use the functions provide and create this assignment
IF(IS_NOT_NULL(field name where INDIA is to be placed ),INDIA)
close the expression builder & in the table field row maintain the field name where you want the INDIA value to be placed.
In the record mode choose a record where this is to be replaced right click ,run the assignment -you get a success or failure message ,now if this is what you require then select all the records where you want this update & proceed.
Please let us know if your issue is solved , reward points too if so !
Regards,
Anita

Reg "created by" and "updated by" fields in Data Manager

Hi,
I just want to know if we have any solution for the "Create By" and "Update By" issue in data manager. Because in my system i have two users. The 1st user created the record and later if the 2nd user edits any field then only the "Update By" field should show the 2nd user name but as of now now it updates both the "Create By" and "Update By" by the 2nd user name.
Expecting your valuable inputs on this.
Thanks in advance !!

Hi Arumugam,
goto Console and check the "Selected Fields" property of your "Create By" fields. You should choose a field that does not change at all if some updates the record. A good choice is a Auto ID that is created only once when the record is created. So you can ensure that your Create User will not change if anyone is updating the record later on.
BR Michael

MDM 7.1 data manager server selection issue

Hello,
I have come across a little feature in MDM 7.1 that is worth mentioning. I made a mistake by entering the wrong server into the data manager data server selection dialogue. I first typed in wrongly:
serverxyz:mdp when the server should simply have been serverxyz. The outcome however was that with both the right and the wrong server entered the selection box in the server selection would automatically complete the server to the wrong entry and I could not select serverxyz.
The solution (for now) is to edit the registry on the client windows machine, by doing the following:
-> go to START menu and Select RUN
-> type in regedit
navigate to
HKEY_LOCAL_MACHINE
->SOFTWARE
-->SAP
--->MDM 7.1
>COMMON
>KNOWN SERVERS
Delete any entry there that doesnu2019t work and that solves my issues.
I hope this helps anyone running into the same issue.

Thank you - nice hack.

Data manager - Matching mode

Hi,
I am using MDM 5.5. and in Vendor deduplication I have created the rules and startegies. And in the matching mode the system gave me the list of HIGH possible duplicates. Is there a way that i can pull the data our from the data manager and send it to the user to confirm that this is the duplicate vendors.
Appreciate your quick reply
Thanks,
Suresh

Hi Suresh,
You can use APIs for this purpose.
Other, workaround is that you can use MDM Workflow. As i don't have MS Visio installed but think it should work.
See in workflow when your Merge step comes, you will come to know the scores and hence therefore can send these duplicate vendor records out of MDM.
I think for this there should be two WORKFLOW1: START>MATCH>STOP
WORKFLOW2: START->SYNDICATE-->STOP
During WORKFLOW1 MATCH STEP when a use Execute this step, he will come to know Duplicate records by SCORE and COLOR, SAY DURING MATCH STEP you have 10 records out of 40 which are duplicates, now you will select these all 10 duplicate records right click >Choose Workflow>Split records into a new JOB(WORKFLOW2).
So all these duplicate records will syndicate out of MDM as WORKFLOW2 contains SYNDICATE STEP.
Also after sending only duplicate records, you can complete WORKFLOW1 by sending it to next step STOP.
I don't have work-flow(MS-VISIO) installed, so cant test it at my end.
Just Check it and revert with Result if it helps, i think it should work else you can use APIs
Regards,
Mandeep Saini

LiveCycle 2.6.1 Data Management with The ColdFusion 8.0 DataManagement Event Gateway Issue

Hello all,
I've recently been developing a project that involves sending out events from ColdFusion to LiveCycle 2.6.1 using the Data Management event gateway to Flex 4.0 clients (LiveCycle and ColdFusion are on different Instances, but the same server). To begin with, I used ColdFusion assemblers, DAO's, and models and everything worked fine locally. After deploying this setup to a beta site, I decided that this setup would be very troublesome in terms of configuring clustered instances across multiple servers. I then decided to convert my assemblers, DAO's, and models to Java. The conversion went well and the flex clients see the exact same data as they did with the ColdFusion adapter.
Once I tried to send an update through from my ColdFusion application to a Flex client, I get an error stating that:
"Unable to find the Flex adapter for destination My_Dest in the RMI registry on localhost:1099.The Flex adapter may not be running or the destination may be incorrect."
After seeing this error, downloaded a Java-based RMI inspector to see what was going on. To get a good idea of what was happening when the ColdFusion adapter was being used, I switched my data-management-config file back to the CF adapter. I noticed that the RMI entry was as follows:
localhost:1099/cfdataserviceadapter/My_Dest
localhost:1099/cfassembler/my_cf_instance
Once I gathered this data as the base, I converted back to the Java adapter in my data-management-config file, restarted the servers, and ran the RMI inspector again. Only the "localhost:1099/cfassembler/my_cf_instance" was showing. (This one shows because I have "Enable Remote Adobe LiveCycle Data Management Access" checked in my CF instance's CF Admin -> Flex Integration). Since I don't need this checked anymore, I unchecked it and re-ran the RMI inspector. As it should, the "localhost:1099/cfdataserviceadapter/My_Dest" went away. Since no destination shows up, it means that the Flex adapter isn't registering my "my_Dest" destination with RMI. Since it isn't registered, I can't see it when I try to send a message through the CF Data Management event gateway.
Can anyone help me out here? I certainly may be missing something when it comes to RMI (I don't work with Java very often). Any advice would be greatly appreciated!
Thank you,
Dustin Blomquist

Dustin,
Without the ColdFusion based data management destination defined on the LCDS server, the destination will not show up in the RMI registry. It is only the CF adapter code that does this. The 'stock' LCDS adapter does not support invoking via RMI the way the CF version does.
I would recommend you run the LCDS MessageBrokerServlet inside the ColdFusion web application. This will give you two things:
1. You will not have the overhead of RMI between CF and LCDS as they will share the same VM (better performance!).
2. You will be able to use the CF Data Management Gateway to pass messages to Java-based destinations. The APIs the gateway uses should work fine with either CF or Java based Data Management destinations.
The CF/LCDS integration doesn't support what you are trying to do when you run two seperate instances.

Data-management-config.xml issue

My question is if i can have multiple
data-management-config.xml files? for a better administration i am
separating it into multiple files but when trying to access a
destination it fails so i assume this is not possible, is that
right?

Ok imagine i have 30 destinations in one
data-management-config.xml, that's a lot of destinations, so when i
want to modify something in that file i need to look all over it to
find what i want, so instead of that it would be nice to being able
to have 3 data-management-config.xml files, with 10 destinations on
each, that way it would be easier to manage and update them.
This is requirement of the QA department, they don't want to
review a gigantic data-management-config.xml, they would prefer to
manage 3 or 4 files instead of one.
So the question is: IS this possible? or do i necessarily
need to use one and just one data-management-config.xml?

Data Manager Package Error in SAP BPC 10

Hi All,
I am getting below error message while running the Data manager package /CPMB/LOAD_INFOPROVIDER in SAP BPC 10. Screenshot is attached for your reference. Please help in solving this issue.
Thanks & Regards,
Ramesh.

Hi Vadim,
Please find the Advanced DM Script of Copy Package.
PROMPT(RADIOBUTTON,%TARGETMODE%,"Handling of records",0,{"Copy records with match key","Copy by replacing data in same data region of Entity, Category, Time and Audit ID"},{"0","2"})
PROMPT(RADIOBUTTON,%CHECKLCK%,"Select whether to check work status settings when importing data.",1,{"Yes, check for work status settings before importing","No, do not check work status settings"},{"1","0"})
PROMPT(COPYMOVEINPUT,%SELECTION%,%TOSELECTION%,"Select the members to COPY and where to",%DIMS%,0)
INFO(%TEMPNO1%,%INCREASENO%)
INFO(%ACTNO%,%INCREASENO%)
TASK(/CPMB/CM_CONVERT,OUTPUTNO,%TEMPNO1%)
TASK(/CPMB/CM_CONVERT,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/CM_CONVERT,SAPPSET,%APPSET%)
TASK(/CPMB/CM_CONVERT,SAPP,%APP%)
TASK(/CPMB/CM_CONVERT,SELECTION,%SELECTION%)
TASK(/CPMB/CM_CONVERT,TOSELECTION,%TOSELECTION%)
TASK(/CPMB/CM_CONVERT,KEYDATE,%SELECTION_KEYDATE%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,CHECKLCK,%CHECKLCK%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,SELECTION,%TOSELECTION%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,KEYDATE,%SELECTION_KEYDATE%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,DUMPLOADMODE,3)
TASK(/CPMB/APPEND_LOAD,PREPROCESSMODE,0)
TASK(/CPMB/APPEND_LOAD,TARGETMODE,%TARGETMODE%)
TASK(/CPMB/APPEND_LOAD,INPUTNO,%TEMPNO1%)
TASK(/CPMB/APPEND_LOAD,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/APPEND_LOAD,RUNLOGIC,%RUNLOGIC%)
TASK(/CPMB/APPEND_LOAD,CHECKLCK,%CHECKLCK%)
TASK(/CPMB/APPEND_LOAD,KEYDATE,%SELECTION_KEYDATE%)
Thanks & Regards,
Ramesh.

Not able to see data in the qualifier table of the main tbl , Data Manager

Hi,
I have an issue of not able to see the data of two qualified table after populating them.
It is in mdm-5.5 ps4.
When populating data first time ,it shows up in those two table slots in the right side of the Data Manager.
However subsequently it does not show up in those slots , only by right click on the table and selecting "View/edit", the window pops up where those data shows up.
However unlike other qualified tables the data does not showup automatically for these two tables.
Appreciate any suggestion or feedback on this.
regards,
-reo

You may have checked the Filter Check Box next to the Qualified Lookup cell in Data Manager, when the current table is the Main Table.
You use the Filter Checkbox to limit the qualified table records by the current search selections.
Secondly, you have see if there are any Qualified Links to the main table record you are viewing.
If not, create the Qualified links in Data manager, for the main table record and the Qualified Table Record.
Once this is done, you will see the Display fields of the Qualified table for which the links exists for the given main table record.
Message was edited by:
Adhappan Thiagarajan

Unable to refresh SQL Server data source through Data Management Gateway

I just installed the version 1.1.5226.8 of Data Management Gateway and tried to refresh a simple query on a table connected to SQL Server, with no transformations in Power Query.
This is the error I obtain:
Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: transfer service job status is invalid.
I am wondering whether my Power BI is still not updated to handle such a connection type, or there could be something else not working?
I correctly created the data source in admin panel following instructions in Release Notes, and
test Power Query connection is ok.
Marco Russo http://www.sqlbi.com http://www.powerpivotworkshop.com http://sqlblog.com/blogs/marco_russo

I made other tests and I found important information (maybe there is a bug, but read the following).
The functions DateTime.LocalNow and DateTime.FixedLocalNow
work correctly, generating these statements to SQL Server:
    convert(datetime2, '2014-05-03 06:37:52.1135108') as [LocalNow],
    convert(datetime2, '2014-05-03 06:37:52.0525061') as [FixedLocalNow],
The functions DateTimeZone.FixedLocalNow, DateTimeZone.FixedUtcNow,
DateTimeZone.LocalNow, and DateTimeZone.UtcNow
stop the scheduled refresh with the error I mentioned
in my previous messages, generating these statements to SQL Server:
    '2014-05-03 06:37:52.0525061+02:00' as [TZFixedLocalNow],
    '2014-05-03 04:37:52.0525061+00:00' as [TZFixedUtcNow],
    '2014-05-03 06:37:52.1135108+02:00' as [TZLocalNow],
    '2014-05-03 04:37:52.1135108+00:00' as [TZUtcNow]
I solved the issue by placing the DateTimeZone calls after a Table.Buffer call, so query folding does not translate in SQL these functions. However, it seems like something to fix.
Marco Russo http://www.sqlbi.com http://www.powerpivotworkshop.com http://sqlblog.com/blogs/marco_russo

Cannot Delete Articles from Data manager..

Hi Guru's,
WHile delting record s from Data Manager I am getting Error
" Insufficient disk space available on DBMS" and as a result i cannot delete reocrds..
What could be the issue?
Please let me know if ican take help of our Basisi admin team .. Or Is there anything that i can work out in MDM..
Regards,
Vikrant M Kelkar..

Hi everyone,
Got it .. It was isseu because the table space was full and it ddnt allow me to further delete articles..
Increased Table space and its ALl Good now..
Thanks all ( whoen=ver reads this thread)
Regards
Vikrant M Kelkar

Is there a Java utility class to help with data management in a desktop UI?

Is there a Java utility class to help with data management in a desktop UI?
I am writing a UI to configure a network device that will be connected to the serial port of the computer while it is being configured. There is no web server or database for my application. The UI has a large number of fields (50+) spread across 16 tabs. I will write the UI in Java FX. It should run inside the browser when launched, and issue commands to the network device through the serial port. A UI has several input fields spread across tabs and one single Submit button. If a field is edited, and the submit button clicked, it issues a command and sends the new datum to the device, retrieves current value and any errors. so if input field has bad data, it is indicated for example, the field has a red border.
Is there a standard design pattern or Java utility class to accomplish the frequently encountered, 'generic' parts of this scenario? lazy loading, submitting only what fields changed, displaying what fields have errors etc. (I dont want to reinvent the wheel if it is already there). Otherwise I can write such a class and share it back here if it is useful.
someone recommended JGoodies Bindings for Swing - will this work well and in FX?

Many thanks for the reply.
In the servlet create an Arraylist and in th efor
loop put the insances of the csqabean in this
ArrayList. Exit the for loop and then add the
ArrayList as an attribute to the session.I am making the use of Vector and did the same thing as u mentioned.I am using scriplets...
>
In the jsp retrieve the array list from the session
and in a for loop step through the ArrayList
retrieving each CourseSectionQABean and displaying.
You can do this in a scriptlet but should also check
out the jstl tags.I am able to remove this problem.Thanks again for the suggestion.
AS

Data Manager Packeage and Process chain si not working

Hi All,
I executed a data manager package which contain a process chain to revaluate the one of my Account dimension meneber Say "Revenue". I am working on BPC NW 7.0
steps I followed:
1. I created a script logic file and created a custom process chain.
process chain steps:
a) Start variant
b) Modify dynamically
c) Run Logic
d) Or and Clear BPC tables
2. This process chain was included in data manager package.
3. Data manager package was modyfied to include parameters and scipt logic file name.
4. executed data package
The issue is " when I execute Data manager Package" I dont get any error but when I View status I dont see any pachage running or completed. If I see Process chain, It is failing at first step of Modify dynamically..no clue?
Could you please let me know what could be a issue?
Cheers,
SAC

I encounter this problem, Do this Steps:
I. First,check if your process chain is existing in the Library.
II.If yes,follow the steps below:
1. Edata - organize Package - Modify your Package.
2.Check if you had the correct process chain.
3.IF yes, Click View package at its right side.
4.Expand the Task Folder and take note of the Task Name (e.g. ZBPC_PROT_RUN_LOGIC)
5.click Advance,Compare the task name that you noted in the syntax TASKS
(e.g. TASK(ZBPC_PROT_CF_RUN_LOGIC,SUSER,%USER%)
6. It should be the same.
Running package but not appearing any status happens when the system cannot find your process chain.
hope this helps,

Matching issue in Data Manager

Similar Messages

Maybe you are looking for