Data Manager Package Error in SAP BPC 10

Hi All,
I am getting below error message while running the Data manager package /CPMB/LOAD_INFOPROVIDER in SAP BPC 10. Screenshot is attached for your reference. Please help in solving this issue.
Thanks & Regards,
Ramesh.

Hi Vadim,
Please find the Advanced DM Script of Copy Package.
PROMPT(RADIOBUTTON,%TARGETMODE%,"Handling of records",0,{"Copy records with match key","Copy by replacing data in same data region of Entity, Category, Time and Audit ID"},{"0","2"})
PROMPT(RADIOBUTTON,%CHECKLCK%,"Select whether to check work status settings when importing data.",1,{"Yes, check for work status settings before importing","No, do not check work status settings"},{"1","0"})
PROMPT(COPYMOVEINPUT,%SELECTION%,%TOSELECTION%,"Select the members to COPY and where to",%DIMS%,0)
INFO(%TEMPNO1%,%INCREASENO%)
INFO(%ACTNO%,%INCREASENO%)
TASK(/CPMB/CM_CONVERT,OUTPUTNO,%TEMPNO1%)
TASK(/CPMB/CM_CONVERT,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/CM_CONVERT,SAPPSET,%APPSET%)
TASK(/CPMB/CM_CONVERT,SAPP,%APP%)
TASK(/CPMB/CM_CONVERT,SELECTION,%SELECTION%)
TASK(/CPMB/CM_CONVERT,TOSELECTION,%TOSELECTION%)
TASK(/CPMB/CM_CONVERT,KEYDATE,%SELECTION_KEYDATE%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,CHECKLCK,%CHECKLCK%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,SELECTION,%TOSELECTION%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,KEYDATE,%SELECTION_KEYDATE%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,DUMPLOADMODE,3)
TASK(/CPMB/APPEND_LOAD,PREPROCESSMODE,0)
TASK(/CPMB/APPEND_LOAD,TARGETMODE,%TARGETMODE%)
TASK(/CPMB/APPEND_LOAD,INPUTNO,%TEMPNO1%)
TASK(/CPMB/APPEND_LOAD,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/APPEND_LOAD,RUNLOGIC,%RUNLOGIC%)
TASK(/CPMB/APPEND_LOAD,CHECKLCK,%CHECKLCK%)
TASK(/CPMB/APPEND_LOAD,KEYDATE,%SELECTION_KEYDATE%)
Thanks & Regards,
Ramesh.

Similar Messages

Clear Data Manager Package Error "The data file is empty."

Hi,
When I run the Clear data package in Data Manager, I receive the error "The data file is empty." I selected a very specific set of dimension values (none are calculated) and am on BPC 7.5 SP3. I subsequently turned on debugging to troubleshoot, but do not see any obvious issues leading the the error message. The log file with debugging turned on is below. Any help would be greatly appreciated!
Thanks.
Tom
TOTAL STEPS 3
1. Export_Zero: completed in 1 sec.
2. Load Cube: Failed in 0 sec.
3. Clear: completed in 0 sec.
[Selection]
ENABLETASK= Yes
CHECKLCK= Yes
(Member Selection)
Category: ACTUAL
Time: 2010.C_SEP
Affiliate: az_swhd
Account: Donor_DART_ID_1
Functional: Benchmark_F
Report: Cons
Restriction: AnyRestricted
[Messages]
The data file is empty. Please check the data file and try again.
[EvModifyScript Detail]
12-28-2010 17:30:05 - Debug turned ON
INFO(%TEMPFILE%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp)
TASK(EXPORT_ZERO, APPSET, ESMetrics)
TASK(EXPORT_ZERO, APP, CONSOLIDATED)
TASK(EXPORT_ZERO, USER, NESSGROUP\tbardwil)
TASK(EXPORT_ZERO, FILE, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp)
TASK(EXPORT_ZERO, SQL,
select [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM ( SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFACTCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFACTWBCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFAC2CONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED')) as ZeroTable group by [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID] OPTION(MAXDOP 1)
TASK(EXPORT_ZERO, DATATRANSFERMODE, 2)
TASK(LOAD CUBE, APPSET, ESMetrics)
TASK(LOAD CUBE, APP, CONSOLIDATED)
TASK(LOAD CUBE, USER, NESSGROUP\tbardwil)
TASK(LOAD CUBE, FILE, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp)
TASK(LOAD CUBE, DATATRANSFERMODE, 4)
TASK(LOAD CUBE, DMMCOPY, 0)
TASK(LOAD CUBE, PKGTYPE, 0)
TASK(LOAD CUBE, CHECKLCK, 1)
TASK(CLEAR COMMENTS, APPSET, ESMetrics)
TASK(CLEAR COMMENTS, APP, CONSOLIDATED)
TASK(CLEAR COMMENTS, USER, NESSGROUP\tbardwil)
TASK(CLEAR COMMENTS, DATATRANSFERMODE, 0)
TASK(CLEAR COMMENTS, SELECTIONORFILE, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp)
TASK(CLEAR COMMENTS, ENABLETASK, 1)
TASK(CLEAR COMMENTS, CHECKLCK, 1)
INFO(%ENABLETASK%, 1)
INFO(%CHECKLCK%, 1)
INFO(%SELECTION%, [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED'))
INFO(%TOSELECTION%, [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED'))
INFO(%APPSET%, ESMetrics)
INFO(%APP%, CONSOLIDATED)
INFO(%CONVERSION_INSTRUCTIONS%, )
INFO(%FACTCONVERSION_INSTRUCTIONS%, )
INFO(%SELECTIONFILE%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\FROM_51_.TMP)
INFO(%TOSELECTIONFILE%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\TO_51_.TMP)
INFO(%DEFAULT_MEASURE%, PERIODIC)
INFO(%MEASURES%, Periodic,QTD,YTD)
INFO(%OLAPSERVER%, ETSCSAP047940.EASTER-SEALS.ORG)
INFO(%SQLSERVER%, ETSCSAP047940.EASTER-SEALS.ORG)
INFO(%APPPATH%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\)
INFO(%DATAPATH%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\DataManager\DataFiles\)
INFO(%DATAROOTPATH%, C:\BPC\Data\WebFolders\)
INFO(%SELECTIONPATH%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\DataManager\SelectionFiles\)
INFO(%CONVERSIONPATH%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\DataManager\ConversionFiles\)
INFO(%TEMPPATH%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\)
INFO(%LOGICPATH%, C:\BPC\Data\WebFolders\ESMetrics\Adminapp\CONSOLIDATED\)
INFO(%TRANSFORMATIONPATH%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\DataManager\TransformationFiles\)
INFO(%DIMS%, [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[Time])
INFO(%FACTDIMS%, [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID])
INFO(%CATEGORY_DIM%, [Category])
INFO(%TIME_DIM%, [Time])
INFO(%ENTITY_DIM%, [Affiliate])
INFO(%ACCOUNT_DIM%, [Account])
INFO(%CURRENCY_DIM%, )
INFO(%APP_LIST%, Consolidated,ES_INC,GrantMgmt,LegalApp,LRate,Ownership,Rate)
INFO(%ACCOUNT_SET%, DONOR_DART_ID_1)
INFO(%AFFILIATE_SET%, AZ_SWHD)
INFO(%CATEGORY_SET%, ACTUAL)
INFO(%FUNCTIONAL_SET%, BENCHMARK_F)
INFO(%REPORT_SET%, CONS)
INFO(%RESTRICTION_SET%, ANYRESTRICTED)
INFO(%TIME_SET%, 2010.C_SEP)
INFO(%ACCOUNT_TO_SET%, DONOR_DART_ID_1)
INFO(%AFFILIATE_TO_SET%, AZ_SWHD)
INFO(%CATEGORY_TO_SET%, ACTUAL)
INFO(%FUNCTIONAL_TO_SET%, BENCHMARK_F)
INFO(%REPORT_TO_SET%, CONS)
INFO(%RESTRICTION_TO_SET%, ANYRESTRICTED)
INFO(%TIME_TO_SET%, 2010.C_SEP)
INFO(DATAMGRGLOBALBPU, )
INFO(DATAMGRGLOBALCLIENTMACHINEID, ETSCWLT048794)
INFO(DATAMGRGLOBALERROR, )
INFO(DATAMGRGLOBALPACKAGEINFOR, )
INFO(DATAMGRGLOBALPACKAGENAME, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\DataManager\PackageFiles\System Files/Clear.dtsx)
INFO(DATAMGRGLOBALSEQ, 51)
INFO(DATAMGRGLOBALSITEID, )
INFO(MODIFYSCRIPT, DEBUG(ON) PROMPT(SELECTINPUT,[CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED'),,"SELECT THE MEMBERS TO CLEAR",[Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[Time]) PROMPT(RADIOBUTTON,1,"DO YOU WANT TO CLEAR COMMENTS ASSOCIATED WITH DATA REGIONS IN BPC?",1,{"YES","NO"},{"1","0"}) PROMPT(RADIOBUTTON,1,"SELECT WHETHER TO CHECK WORK STATUS SETTINGS WHEN DELETING COMMENTS.",1,{"YES, DELETE COMMENTS WITH WORK STATUS SETTINGS","NO, DO NO DELETE COMMENTS WITH WORK STATUS SETTINGS"},{"1","0"}) INFO(C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp,C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempfdla_51_.tmp) TASK(EXPORT_ZERO,APPSET,ESMetrics) TASK(EXPORT_ZERO,APP,CONSOLIDATED) TASK(EXPORT_ZERO,USER,NESSGROUP\tbardwil) TASK(EXPORT_ZERO,FILE,C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp) TASK(EXPORT_ZERO,SQL,
select [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM ( SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFACTCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFACTWBCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFAC2CONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED')) as ZeroTable group by [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID] OPTION(MAXDOP 1)
) TASK(EXPORT_ZERO,DATATRANSFERMODE,2) TASK(LOAD CUBE,APPSET,ESMetrics) TASK(LOAD CUBE,APP,CONSOLIDATED) TASK(LOAD CUBE,USER,NESSGROUP\tbardwil) TASK(LOAD CUBE,FILE,C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp) TASK(LOAD CUBE,DATATRANSFERMODE,4) TASK(LOAD CUBE,DMMCOPY,0) TASK(LOAD CUBE,PKGTYPE,0) TASK(LOAD CUBE,CHECKLCK,1) TASK(CLEAR COMMENTS,APPSET,ESMetrics) TASK(CLEAR COMMENTS,APP,CONSOLIDATED) TASK(CLEAR COMMENTS,USER,NESSGROUP\tbardwil) TASK(CLEAR COMMENTS,DATATRANSFERMODE,0) TASK(CLEAR COMMENTS,SELECTIONORFILE,C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp) TASK(CLEAR COMMENTS,ENABLETASK,1) TASK(CLEAR COMMENTS,CHECKLCK,1) BEGININFO(
select [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM ( SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFACTCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFACTWBCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFAC2CONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED')) as ZeroTable group by [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID] OPTION(MAXDOP 1)
) SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 AS SIGNEDDATA FROM ( SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 AS SIGNEDDATA FROM TBLFACTCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 AS SIGNEDDATA FROM TBLFACTWBCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 AS SIGNEDDATA FROM TBLFAC2CONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED')) AS ZEROTABLE GROUP BY [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID] OPTION(MAXDOP 1) ENDINFO )
Edited by: Tom Bardwil on Dec 28, 2010 5:20 PM

You can greatly improve your chance of receiving a helpful answer to your question if you state the version (MS or NW) and the release (5.1, 7.0, 7.5) of BPC which you are using.
Also notice the sticky [note|Please do not post BPC, SSM or FI/CO questions here!; at the top of this forum whereby we announced new dedicated forums for BPC which are the proper place to post your questions regarding BPC in the future to be able to reach the right audience for your question.
Thanks and best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Applications Regional Implementation Group (RIG)

Import package error in SAP BPC 4.1

Hi,
Can anyone please assist.
I tried running the import package several times on bpc ver 4.1 without aby success. I even tripple checked Users and Security and it validated successfully but the package still crashes in the middle of processing.
The error message read:
[Package Result = Error]
Package:                    Import
Appset:                       CQS
Application:                 FIXEDCOST
Request Time:             2009-06-23 13:44:42
Start   Time:                2009-06-23 13:44:42
End     Time:               2009-06-23 13:48:51
Total   Time:                00:04:09
TOTAL STEPS 3
1. Assign initial parameters:        completed in 0 sec.
2. Convert data:                     completed in 7 sec.
3. Load and process:                 Failed in 241 sec.
[Selection]
FILE= DATAMANAGER\DATAFILES\CQSSA\2009\Fixed Costs Testnew.txt
TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\CQSSA\FC_Trans_ZA_ACT.xls
CLEARDATA= Yes
RUNLOGIC= No
[Member Selection]
CATEGORY: ACTUAL
ENTITY: SQSSA
TIME: 2009.MAY
[The list of conversion file in each transformation file]
Transformation file: DATAMANAGER\TRANSFORMATIONFILES\CQSSA\FC_Trans_ZA_ACT.xls
     - Conversion file : ConversionFiles\CQSSA\FC_CONV_ZA.XLS!FCOSTACCOUNT
     - Conversion file : ConversionFiles\CQSSA\FC_CONV_ZA.XLS!FCOSTCENTRE
     - Conversion file : ConversionFiles\CQSSA\FC_CONV_ZA.XLS!MARKETS
[Messages]
FIXEDCOST
Failed
Submit Count : 15278 (Record count in source file : 20056)
Accept Count : 0
Reject Count : 15278
You do not have WRITE authority.::ACTUAL
Where can I enable WRITE authority?

Hi Vishal Mahawadhi,
Thank you for replying. I've tried all your suggestions before I even logged the query. I even went to analysis manager, gave access to the application and processed the cube but still that didn't help.
But I noticed that I only have read access when I look at the settings on the roles in analysis manager. The problem is that I can't change the settings to read/write. Version 4.1 is a mess.

Error while running data manager package

Hi All,
when i am running data manager package for currency conversion i am getting the following error
"An exception with the type CX_SY_CREATE_DATA_ERROR occurred, but was neither handled locally, nor declared in a RAISING clause
The data object could not be created: The type /B28/MHED7W9U does not exist."
Plase suggest where i am making mistake.
Thanks

Below are our BPC versions:
BPC on Server Manager: 5.0.486
Data Manager from eData: 5.0.484
BPC from eTool: 5.0.486
Below is the total error message as per your suggestion to run Export package. (even with service account which we used to install the software we are getting same error message.)
TOTAL STEPS 2
1. Dump Data: Failed in 0 sec.
[Selection]
FILE=\ApShell_SK\FINANCE\DataManager\DataFiles\SKTEST.TXT
TRANSFORMATION=\ApShell_SK\FINANCE\DataManager\TransformationFiles\System Files\Export.xls
MEASURENAME=PERIODIC
(Member Selection)
Category: ACTUAL
Time: 2006.JAN
Entity:
Account:
DataSrc:
IntCo:
RptCurrency:
[Messages]
An error occurred while executing a package.
Package Error Events:
ErrorCode = -1073668060
Source = Dump Data
SubComponent=
Description = The task "Dump Data" cannot run on this edition of Integration Services. It requires a higher level edition.
IDOfInterfaceWithError= {8BDFE889-E9D8-4D23-9739-DA807BCDC2AC}

Error in Execution of Data Manager Package

Hi Folks,
We are facing the following error while executing the Data Manager Package for Clear/Import..
Error Details:
[Admin-ProcessPartition]Errors in the OLAP storage engine: The attribute key cannot be found: Table: dbo_tblFactFinance, Column: ENTITY, Value: CONEUROPE.
Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation.
Errors in the OLAP storage engine: An error occurred while processing the 'FAC2Finance_INCR_UPDATE_TEMP_kmj3h_' partition of the 'Finance' measure group for the 'Finance' cube from the YASH6 database.
Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation.
Internal error: The operation terminated unsuccessfully.
Please Look into it.....

Hello,
It looks like you have an inconsistency on the OLAP level. Please try to reprocess Entity dimension choosing full process for your application. This should solve the issue.
Best regards,
Mihaela

Email BPC data manager Package log to a team for BPC10 NW

Hi iI found documentation on how to send Data manager package by email. Contained 2 transports but the documentation is for 7.0 NW do you know if they have a documentation for BPC 10 NW ?

Hi Frederic,
Please check the below documnet.
How to Email BPC Data Manager- Formula Log or Package Log
Thanks,
Dinesh.v

Data records rejected while using Data Manager Packages

Hello all ,
We have configured the dimensions and applications in SAP- BPC 7.5 NW. However , while loading the data into the application using a data manager package , all the records are rejected. The following is the error :
Line 3 :Dimension: P_CC member: SALESTEAM1 is invalid or is a calculated member
Line 3 :Dimension: PRODUCT member: PRODUCTA is invalid or is a calculated member
However , these member are present in the dimensions and are processed as well !! Any help is appreciated .
THanks
Vijay

The message seems to be saying you have a dimension forumula defined for those two cost centers. Please check your dimension members master data and make sure there is nothing defined in a property column called "Formula" for those two members. If there is something populated, then delete the cell contents and save and process your dimension. Then try your data manager load again.
Best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Applications Regional Implementation Group (RIG)

Preview transformation file in data manager package

Dear BPC Experts,
When we try to preview Tranformation file while running data manager package to import transaction data from BW, we are getting following error. We do not get this error if we use load from flat file package.
We are on BPC 10 PS06, EPM Add-in SP14 patch3.
Has anybody seen this issue before? We can paste the entire log if required.
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.ArgumentException: Separator cannot be null and must contain only one char
Parameter name: separator
   at FPMXLClient.DataManager.CsvParser.Parse(String data, String separator, Boolean hasHeader) in d:\Olympus_100_REL_XLCLIENT\src\FPMXLClient\src\DataManager\CsvParser.cs:line 15
   at FPMXLClient.DataManager.UI.Forms.FilePreview.BuildDataArrayFromCsv(String data) in d:\Olympus_100_REL_XLCLIENT\src\FPMXLClient\src\UILayer\DataManagerUI\Forms\FilePreview.cs:line 487
   at FPMXLClient.DataManager.UI.Forms.FilePreview.BuildDataArray(String data, Boolean formatted) in d:\Olympus_100_REL_XLCLIENT\src\FPMXLClient\src\UILayer\DataManagerUI\Forms\FilePreview.cs:line 414
   at FPMXLClient.DataManager.UI.Forms.FilePreview.SpecialFilesProcessing() in d:\Olympus_100_REL_XLCLIENT\src\FPMXLClient\src\UILayer\DataManagerUI\Forms\FilePreview.cs:line 406
   at FPMXLClient.DataManager.UI.Forms.FilePreview.DisplayData() in d:\Olympus_100_REL_XLCLIENT\src\FPMXLClient\src\UILayer\DataManagerUI\Forms\FilePreview.cs:line 351
   at FPMXLClient.DataManager.UI.Forms.FilePreview.InitializePreview() in d:\Olympus_100_REL_XLCLIENT\src\FPMXLClient\src\UILayer\DataManagerUI\Forms\FilePreview.cs:line 102
   at FPMXLClient.DataManager.UI.Forms.FilePreview.FilePreview_Load(Object sender, EventArgs e) in d:\Olympus_100_REL_XLCLIENT\src\FPMXLClient\src\UILayer\DataManagerUI\Forms\FilePreview.cs:line 740
   at System.Windows.Forms.Form.OnLoad(EventArgs e)
   at FPMXLClient.UILayer.Forms.BaseForm.OnLoad(EventArgs e) in d:\Olympus_100_REL_XLCLIENT\src\FPMXLClient\src\UILayer\UI\Forms\Base\BaseForm.cs:line 70
   at System.Windows.Forms.Form.OnCreateControl()
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   at System.Windows.Forms.Control.CreateControl()
   at System.Windows.Forms.Control.WmShowWindow(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at System.Windows.Forms.Form.WmShowWindow(Message& m)
   at System.Windows.Forms.Form.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Best Regards,
Ashwin.

Hi Raju,
Thank you for your reply.
It seems that it is SP related issue. When we downgrade our EPM Add-in to SP13 patch4, it did not throw any error.
Best Regards,
Ashwin.

Customize Data Manager Package

Hi
m new to sap bpc nw version.Can anybody help me for the following issue
1)I want to copy data from one sorce member to multiple destination members. I have used Copy Data Manager Package in BPC NW Version,but its not allowing me to select multiple members of a dimension n the destination.The "Next" option itself is getting disabled.The same was enabled in MS Version.
How can I customize Data Manager Package to get Multiple Selections?

As "Copy" is predefined BPC DM package ,this DM package can not be customized. Copy wizard wont allow if source & destination members are of different count . If destination members are less , then you can run Copy package multiple times. If destination members are more , you can try creating simple script logic to copy .
Edited by: pkrishnas on Oct 27, 2011 5:49 PM

Prevent Data Manager Package to be startet at certain times of the day

Hi
We currently have an issue as described below.
During month end closing SAP BW data is updated to BPC 3 times each day. This is done using a Data Package linke performing 8 steps in total. This DP Link works as expected. The problem is that while this is running users start other data manager packages that are based on the data from the data package link. This is an issue because the data is not correctly allocated before all 8 steps of the DP link has completed. This leads to very funny / Incomplete data and we would like to prevent this issue.
The question is therefor! Can we implement some kind of logic that prevents users from starting other data manager packages when the DP link is running?
/Chris

Hi Chris,
If you want to do the check for a DM which is running eg. a script via the default formular PC you can create copy of the PC and build in an extra step just after the start to run a custom program.
You can set up the custom program eg. to check the table RSPCLOGCHAIN for dependent running PC or validate if the DM package can run dependent on some parameters set in a custom table. Eg. set the time range for when you are running the pakage link.
You don't need much logic in the custom program to do the check.
I don't see another or even standard way to do the check in BPC.
Br
Rasmus Larsen

How to write custom messages to Data Manager package log from within SSIS?

Just wonder in BPC 7.0/7.5 MS how do you write custom messages to Data Manager package log from within SSIS? I mean I want to log output of specific custom tasks (non-BPC) in SSIS control flow to the resultant BPC package log created when running SSIS package in Data Manager. Can this be done in a Script Task or some other way? Not much documentation out there on this.
Thanks,
Brian

Hi Brian
In order to achieve what you want, it can get tricky in your package, ultimately It would depend on the task, for example if you had an execute SQL task, you could use a RAISEERROR command in your SQL statement and BPC would return the error message that you specified.
If you had other tasks, then it would be a bit more tricky, you would have to have custom messages based on event handlers.
Please see below links for examples :
[Custom messages for logging|http://msdn.microsoft.com/en-us/library/ms345174.aspx]
[Custom Logging Using Event Handlers |http://consultingblogs.emc.com/jamiethomson/archive/2005/06/11/SSIS_3A00_-Custom-Logging-Using-Event-Handlers.aspx]
Hope this helps
Kind Regards
Daniel

Change of sign when running the data management package

Hi All,
I have written a script logic for copying my Budget member under category dimension to say another member say "XYZ" under category dimension and this is for my Member Sales under ACcount dimension having acctype as inc.
When i run the logic thru default i am getting the correct value. however if i run the same thru data manager package- my sign changes.
Eg. 100000 is copied as -100000 and -50000 is copied as 50000.
Please help me out
Regards
Navin

Hi Navin,
CREDITPOSITIVE= YES | NO
Default: YES
If No, all amounts referring to an ACCOUNT type (LEQ, INC) will have their signs reversed.
Since you are referring to the member account sales as INC the default logic considers the sign as reversed.
Please look at this link which helps you to understand
Significance of Account Type EXP,LEQ,INC,AST in BPC- Need some valid reason
Hope this helps.
Regards,
Sanjeev

The Full Optimization & Lite Optimization Data Manager packages are failing

Hi,
The Full Optimization and Lite Optimization Data Manager packages are failing with the following message "An Error occured while querying for the webfolders path".
Can anyone had similar issue earlier, please let me know how can we rectify the issue.
Thanks,
Vamshi Krishna

Hi,
Does the Full Optimize work from the Administration Console directly?
If it's the case, delete the scheduled package for Full Optimize every night (in both eData -> Package Schedule Status and in the Scheduled Tasks on your server Control Panel -> Scheduled Tasks), and then try to reschedule it from scratch.
If it's not solving your problem, I would check if there are some "wrong" records into the FACT and FAC2 tables.
After that, I would also check if the tblAppOptimize is having other values than 0. For all applications, you should have a 0 there.
Hope this will help you..
Best Regards,
Patrick

Error in SAP BPC

Hi Experts,
We are facing a strange error while sending data from input Schedule in SAP BPC 7.5 SP08. For Reporting Currency USD, we are able to send data from the input schedule but from reporting currency EUR we are getting the error
"Error running default logic()"..."Error converting records: The root element is missing.
In some of the other schedules, we can send data for EUR and not USD.
Am i missing something?
Thanks in advance

Hello Appu,
Do you have something in default script logic? Revise it in the admin consol Default.LGF inside the application and scripts logic, and delete the code include. Always if you don't need to use it.
By defect SAP BPC include some code there and you must delete it and save the changes.
Regards,
Gabriel Garcia

Default File Selection while Running Data Manager Package

Hi BPC Experts,
What i wanted to know is that is possible to make a file selection as "Default" for running a data manager package.Say for example i wanted to run a simple DMP "Load Transaction data from from BW InfoProvider UI" and the file that i always select is "ZFIGL010" for this is it possible to get "ZFIGL010" file as pre-populated (or pre-selected)instead user going and choosing from long list of files available "Info Provider Selection".
Thanks
Rahul

Rahul,
As Ashish said you cant get rid of the info provider name selection as you are using the /CPMB/LOAD_INFOPROV_UI pkg. But if you use /CPMB/LOAD_INFOPROVIDER package you can follow the below steps to get rid of the selection.
Comment the below prompt statement in the Advance script of the pkg which asks you to select the Info provider.Its the first statement of the script. You can comment by putting a ' before begining of the statement.
PROMPT(TEXT,%InforProvide%,"Please enter InfoProvider to download data",)
Add a INFO statement and pass the same INFO statement to the Task. Please refer to image below.
Regards
Nikhil

Data Manager Package Error in SAP BPC 10

Similar Messages

Maybe you are looking for