Material Grid

Hi All,
In billing (VF01) am facing error because of two material, when i checked in MM03 master grid SIZE-30A-38C is maintain for both the material. in J4AB for the said master grid values maintained are 30A-38C-38D-36D-40C-40D, the AFS Valuation is also maintained for the same grids but while creating order am not able to get 36D and 40C grid. what can be the problem? please guide me on the same.
Thanks & Regards
Ashwini

Hi,
Please check the below links...
http://help.sap.com/saphelp_afs30b/helpdata/en/23/96719bd32f11d2aca80000e829fbfe/content.htm
http://wiki.sdn.sap.com/wiki/display/Retail/MaterialGridConceptinAFS
Kuber

Similar Messages

New Idoc in BD10 to send material grid

Hi Experts,
We have a requirement like this : In transaction BD10 when "send material in full" is flagged, we have to start IDOC J3AGRI01 creation (using FM J_4A_MASTERIDOC_CRE_REQ_J3AGRI). At present when the flag is set, only the classifications are distributed.
example:
Transaction BD10.
Material: MOSHF2CND
Message Type: /AFS/MATMAS05
Logical System: IECCLNT510
Flag Send Material in full
with above input it only creates /AFS/MATMAS05 and CLFMAS Idocs, I want J3AGRI IDOC also to be created.
Can you suggest me some BADI/EXITs to meet this requirement? Or any other way to accomplish the above requirement.
A quick reply is highly appreciated.
Thanks,
Vani

Check the BADI "BADI_MATERIAL_OD", method "MG_IDOC_CREATE_FULL" which is called from function module MG_IDOC_CREATE_FULL_MAT line number 185 (Which is called from main program of BD10 when "Send article in Full" option is selected.)

Need a user exit before material substitution executes in VA01, 02

My client has a unique need in SAP AFS. When entering an order, they have material substituion turned on and they want it to always execute. The problem is that we have a custom FM that must execute prior to material substitution - it will determine the material first and then material substitiion should use THAT material to detemine if it needs to substitue a material/grid. I have put break points in every exit I could find in the SAPMV45A exits. The one I would normally use is in MV45AFZZ for changes for VBAP, VBEP, etc. - but no matter what exit I put a break in for debugging (to see when it is called during order entry) - material substituion always executes first. yes, the exit for VBAK executes prior to material substition but that is at the header - I need the order lines. Also note that we are talking about the UPC/EAN tab - we are entering a UPC code and that gets the material/grids we need - this is not on the normal order line screen.
Does anyone have any ideas?
As always - points for helpful answers.
Thanks.
Scott

Only solution was a repair to SAP, so we found way for standard SAP to handle it.

EAN/UPC CODE and PURCHASING GRID

Hi Experts,
In material master can you please let me know how to configure,
1) EAN/UPC Code configuration in Material Master
2) Purchasing grid
I need the info urgently.
Regards,
Subha

Hi Subha,
1)The EAN/UPC's configuration is done in the path
SPRO>Logistics general>Material Master>Settings for key fields>Internal article numbers:
Here we can define external or internal number ranges for the EAN's.We can also define the prefix for EAN/UPCs and define the attributes of the EAN/UPCs.
2) Grids are used in AFS(Appearl and Footware system).There are material grid,purchase grid and sales grids in Appearl and footware industry.
We have to define Charecterstics and using them we have to define a grid(matrix type).While creating a material master this purchase grid has to be assigned in the AFSpurchasing view of the AFS material.
For example--Shirt(material)- Silk cloth white colour 40 size,Silk cloth golden colour 42 size,cotton cloth blue colour 40 size.Here cloth,colour,size are the 3 charecters.Using these 3 charecters a grid is created.This grid is assigned to the material.With this we can have n number of combinations for a single material.
Regards,
Rambhupal

LSMW - Upload Sales Orders

Hi All,
I've worked with LSMW to record transactions in the past, but I'm unsure of what the best approach is for sales orders. Our requirement is to upload a simple tab-delimited text file that contains the PO#, PO type, Material, Grid (we are using AFS), Name/Phone/Address of the ship-to party, and shipping notes text.
My main question is concerned with handling the multiple line items on the orders. I have seen some posts here that suggest using one LSMW to do the header data (VA01), and then a second to do line item data (VA02). However, I need this to be one step. I see there is a BAPI with Business Object BUS2032, but I have not worked with that method.
Any idea on the easiest way to complete this? I'd like to have a simple step for a user to run to automate entering 15-20 orders a day. Any help is appreciated, thanks!
J

Hi,
Firstly you can create the sales orders using the BPAI with header data and for line item details you can go for anothere BAPI
BAPI_SALESORDER_CHANGE. hope it will work.
~linganna

Best Practice for Master Data Reporting

Dear SAP-Experts,
We face a challenge at the moment and we are still trying to find the right approach to it:
Business requirement is to analyze SAP Material-related Master Data with the BEx Analyzer (Master Data Reporting)
Questions they want to answer here are for example:
- How many active Materials/SKUs do we have?
- Which country/Sales Org has adopted certain Materials?
- How many Series do we have?
- How many SKUs below to a specific season
- How many SKUs are in a certain product lifecycle
- etc.
The challenge is, that the Master Data is stored in tables with different keys in the R/3.
The keys in these tables are on various levels (a selection below):
- Material
- Material / Sales Org / Distribution Channel
- Material / Grid Value
- Material / Grid Value / Sales Org / Distribution Channel
- Material / Grid Value / Sales Org / Distribution Channel / Season
- Material / Plant
- Material / Plant / Category
- Material / Sales Org / Category
etc.
So even though the information is available on different detail levels, the business requirement is to have one query/report that combines all the information. We are currently struggeling a bit on deciding, what would be the best approach for this requirement. Did anyone face such a requirement before - and what would be the best practice. We already tried to find any information online, but it seems Master data reporting is not very well documented. Thanks a lot for your valuable contribution to this discussion.
Best regards
Lukas

Pass a reference to the parent into the modal popup. Then you
can reference anything in the parent scope.
I haven't done this i 2.0 yet so I can't give you code. I'll
post if I do.
Oh, also, you can reference the parent using parentDocument.
So in the popup you could do:
parentDocument.myPublicVariable = "whatever";
Tracy

Some of production order overwritten in DSO

Hi experts....
              I have created a DSO, whose key is Plan order,Material, Grid.Firstly DSO taking data from a DS(plan data,which does
not have production order). 2ndly DSO fatching data from another DS(production data,which have production order with plan order)
issue-----in Production order DS some of production order does not have plan order & their material and Grid are same. So
               production order is overwritten and show only latest production order which is updated recently.
               BUT I need all production order in DSO whether their plan order have or not...How to do?
your comments are appreciated...
thanks & regards
Abhishek...

Hi,
No need to create material as UNBW type.
Normal ROH, HALB, FERT material type we can achieve this.
In the BOM of FG or SFG goto item detail screen there is a tick mark in costing.
Remove the tick by OS23 - BOM status.
Now you can do your production as regular. But cost will not get update.You can do regular settlement also.
Regards,
Dharma

Sap afs sd

Scenario is as below:
Our client is in apparels and footwears and have there overseas operation also:
I am doing configuration with the logic that as follows:
Client is doing exports as according to the requirements from the
overseas customers and also there are domestic customers.
Now I am utilising the functionalities like season, material grids and
category structure as below.
SEASON: OFF SEASON,ON SEASON
MATERIAL GRID: NL,XL,XXL (NL NORMAL,,XL EXTRA LARGE,XXL : DOUBLE EXTRA LG)
CATEGORY STRUCTURE : REQUIREMENT CATEGORIES,STOCK CATEGORIES
Product A off season (export-sale) material grids whichever is
applicable or demanded by client customers. As product is, off season
I am using requirement categories and for allocation run i am using
coverage stategy with characteristics as QUALITY,SEASON AND PRODUCT.
I am using Make to order strategy for off season material which would
be export sales ,and make to stock strategy for on season materials
which would be domestic sales.
(path:img-logistic general-afs categories-define coverage strategy)
Now the problems I am facing is system is giving me message "invalid
input" after maintaining coverage strategy parameters ie: such like
category value,allocation run requirements etc.
Now if the above scenario perhaps clear to you,Could you please let me
know where i am going against system(sap afs sd).
Also if possible let me know certain config documents pertaining to
order scheduling,allocation run,delivery and billing
Thanks And Regards
KAPIL MORE

Kapil,
goto define coverage stratergy ->Select your stratergy ->double click on coverage stratergy on left side it will display category structure ->again select the same and double click on Arun/MRP/... option on left side there you should mention Stock category and MRP-Mod tab.
"The MRP module controls the assignment of the requirement categories to the stock categories. Module M1 uses a strategy where all batches of stock, purchase requisitions and purchase orders which are available on the requested delivery date (sales order) and assigned to the stock category, will be used to satisfy the requirement"
and i would suggest you to check each and every tab in structure and stratergy both you might have missed something.
try and revert.
hope its helpful to you.
Regards
Ashwini

Standard PP vs PP in AFS

Dear Gurus!
Please explain me some difference more between standard PP and AFS PP. As I know AFS support Grid Value and Category, But some function missing if compare with Standard PP. And please tell me how to switch standard to AFS or compine together.
Regards,
Tony

Hi,
Material Master : In AFS few view have been added like
AFS MRP :
1.Here you mention the activation of MRP run
2.How material need to be maintained , Bundles or without bundles
3. Batch management . Whether grid value should be the batch number
AFS Valuation : If you are using split valuation then you can valaute material grid value wise.
AFS Basic data :
1.Grid need to be mentioned here. Which dimension grid are you using for the material.
2. Coverage strategy for material.
BOM : Material Grid should be valid at the time of creation of BOM. Only this need to be take care no additional setting require.
Configuration : All customization would be ame like order type , production scheduler profile etc
Only you need to active MRP run for the plant level and also Bundle management.
Business Process : Same as used in discrete.
Regards,
Vishal

Assortments or Prepacks (or something else entirely)?

I am new to SDN, so if I have posted this in the wrong forum, please let me know and I will close the thread and re-open it in the right spot.
I am working on AFS 6.0, and am looking for a solution (hopefully SAP standard) to the following scenario:
Company A may place an order for SKU ABCDE12345 (total quantity of 6000). However, they may want boxes of 6 units each (one of size A, two of size B, two of size C, one of size D). We would ship them 1000 boxes, each with six caps. When we receive the order, the customer will send the SKU, and total quantities per size, along with an identifier of the packing method (1-2-2-1). In the order, we would still like the standard grid for pricing and inventory management, but when we ship, we need to be able to tell the DC that they are to ship the 6-packs.
So in the order we'll see the following:
Material--|-Grid Value-|----
Quantity
ABCDE12345--| |--
6000
|--A|--
1000
|--B|--
2000
|--C|--
2000
|--D|--
1000
But when we ship, it will be in packs of 1-2-2-1.
I have done a little reading on assortments and prepacks, but neither seems to fit this scenario perfectly. If you have any advice, I would greatly appreciate it.
Thanks!
-Dan

Any thoughts on this?

Material num truncated while downloading the data into excel in ALV GRID

Hi,
I developed a report with ALV GRID display. The reoport is having Material number as one of the column. The report shows the total 10 digit material number. When i tried to downlaod the report into an excel sheet or a TXT file, material number in the text file shows only the last two digits.
Please let me know if you have any solution for this.
URGENT

Hi,
I developed a report with ALV GRID display. The reoport is having Material number as one of the column. The report shows the total 10 digit material number. When i tried to downlaod the report into an excel sheet or a TXT file, material number in the text file shows only the last two digits.
Please let me know if you have any solution for this.
URGENT

Display the material details in alv grid based on material(in mara)

hi,
display the material details when get input of material from user in mara table using alv-grid display.
give some examples.
Thanks of advance.

Hi
For your help i am just giving you few hints.
1. Create a selection screen.
2. Select matnr from mara into an internal table.
3. use fm Reuse_Alv_grid_display to display your entries from the internal table
Please read about all of this step by step in the forum.

To make material and quantity grid out in process order

Hi ,
is there any user exit so that material and quanitiy column in process order can be made grid out................as the material and quantity will flow from BOM ........

Hi
Open this link and press Ctrl+F and write component. You will get all possible userexits and Badis relatred to component tab in service or maintenance order. Ask your ABAPER to try those which will be found in this link.
PM-CS User Exits - ERP Operations - SCN Wiki
Thank$

Find sales grid for material(AFS)

hi experts,
How to find sales grid for material.
which table do i need to use.
thanks,
Neo

If it is normal SAP R/3 system then it is MVKE Table
if you are working on AFS Related Project then i am not sure.
you can find the table name by using ST05 .
goto ST05 -> activate Trace -> enter transaction code -> keep the cursor related view-> back to ST05 -> trace off.
click on display and here it shows list of tables
Thanks
Seshu

AFS Material Master - UPC code at SKU (Grid) Level

Hello experts,
I understand that on the AFS Material Master there is a field for UPC code on the Basic Data tab. If you wanted to store the UPC at the SKU level (Grid level) based on Grid Values, where would you enter that data? Is it stored on the Material Master?
Thanks for all the help!

We will have to enter the SKU level data in the Material Master
MM02 -> Additional Data -> Additional EANs
Regards
Sudha

Material Grid

Similar Messages

Maybe you are looking for