Mathscript and object oriented code m code

Hello,
I have some existing code written in Matlab with object-oriented programming that I would like to use with Mathscript RT nodes in LabVIEW.
Does NI have any plan to support object-oriented programming in mathscript RT nodes in the future?
In the mean time, is there any easy solution with minimum changes that would allow me to use my existing code?
Thanks

Hey L54,
Unfortunately, there have not been any public announcements regarding the support of object-oriented code for the MathScript RT nodes. Also, for tips on how to change your code to make it work, there really is no easy way to go about doing this.
Are you deploying to a RT target? Would it be possible for you to use the MATLAB Script Node? This is included with LabVIEW and actually connects to your MATLAB software and would most likely be able to run the object-oriented code.
Sorry about not supporting object-oriented code, but hopefully using the MATLAB Script Node help you achieve your desired functionality.
Joe S
Applications Engineer
National Instruments
MATLAB is a registered trademark of The MathWorks, Inc.

Similar Messages

Article: Object-flow Programming - Merging Dataflow and Object-Oriented Programming

I just posted an ExpressionFlow article:
Object-flow Programming - Merging Dataflow and Object-Oriented Programming
I guess you may find it interesting. If you like it, you should
bookmark it with one of the social bookmarking tools (click the
bookmark link next to the timeline image in the article). That may help
us to get readers and comments from outside the LabVIEW community. And
don't hesitate to participate the discussion. I'd love to hear you
comments on the subject.
Tomi
Tomi Maila

After having problems with spam block software malfunction, I was able recover the following comments to the EXPRESSIONFLOW article Object-flow Programming - Merging Dataflow and Object-Oriented Programming
Written by Zen:
Some combination of data-flow and object-oriented programming, I think,
could make a great impact on sysytem development. However, I see it in
slightly different way than yours....
Written by Matt Holt:
I don't believe NI can get object-flow programming to move far enough
into mainstream that Forbes would cover it. NI has a bit of a
stranglehold on LabVIEW with it's price as compared to say… VS2005. It
seems that by promoting it as "easy to use" that NI may have shot
itself in the foot….
Written by Jim Kring:
Hi Tomi, In my opinion, LabVIEW's native object-oriented programming
capabilities (LabVOOP) do not currently provide a complete tool for
allowing us to implement our OOP system designs. Nearly all of my
system designs require distributed active objects by reference. I think
that National Instruments certainly can evolve LabVIEW to address such
requirements, but I think that it is not a real focus of NI....
If anybody else is missing their comments, I'm sorry I was unable to recover them. Please repost your comments, I appology for the inconvenience.
Tomi Maila

Ready-Made Effects and Object Oriented Timeline

As an actionscript programmer and designer all we need to
effects. But when i searched for ready-effects there is no an
add-on for this. But Adobe must have done this until now. Why there
aren't lot of ready-made effects in Flash?
And one more suggestion to Adobe developers: Every object
must shown as an object in timeline. Not as a layer part. Thus,
programming ability of Flash will arise.

After having problems with spam block software malfunction, I was able recover the following comments to the EXPRESSIONFLOW article Object-flow Programming - Merging Dataflow and Object-Oriented Programming
Written by Zen:
Some combination of data-flow and object-oriented programming, I think,
could make a great impact on sysytem development. However, I see it in
slightly different way than yours....
Written by Matt Holt:
I don't believe NI can get object-flow programming to move far enough
into mainstream that Forbes would cover it. NI has a bit of a
stranglehold on LabVIEW with it's price as compared to say… VS2005. It
seems that by promoting it as "easy to use" that NI may have shot
itself in the foot….
Written by Jim Kring:
Hi Tomi, In my opinion, LabVIEW's native object-oriented programming
capabilities (LabVOOP) do not currently provide a complete tool for
allowing us to implement our OOP system designs. Nearly all of my
system designs require distributed active objects by reference. I think
that National Instruments certainly can evolve LabVIEW to address such
requirements, but I think that it is not a real focus of NI....
If anybody else is missing their comments, I'm sorry I was unable to recover them. Please repost your comments, I appology for the inconvenience.
Tomi Maila

Converting sample Procedural ABAP code in Object oriented code...

Hello Gurus,
I am learning object oriented ABAP. The best way to learn it is do it practically. If I want to change the following code in OO code , how can it be done ?
TABLES : gb01.
Data Declaration
DATA : BEGIN OF i_mid OCCURS 0,
        mid(2),
        text(10),
       END OF i_mid.
DATA :v_tabix LIKE sy-tabix.
Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME
                                   TITLE text-001.
PARAMETER : p_modif(1) DEFAULT 'U',
            p_class LIKE gb01-boolclass DEFAULT '009',
            p_cltyp LIKE gb01-classtype DEFAULT 'S',
            p_table LIKE gb01-bcltab DEFAULT 'BSEG',
            p_field LIKE gb01-bclfield DEFAULT 'HKONT',
            p_excld LIKE gb01-bexclude DEFAULT ' '.
SELECTION-SCREEN END OF BLOCK b1.
Selection Screen F4 Help for Modif ID's
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_modif.
PERFORM get_modifid.
Start of Selection
START-OF-SELECTION.
CLEAR gb01.
CASE p_modif.
    WHEN 'U'. "Update
      UPDATE gb01
      SET bexclude = p_excld
      WHERE bcltab = p_table
      AND bclfield = p_field
      AND boolclass = p_class
      AND classtype = p_cltyp.
      IF sy-subrc NE 0.
        WRITE : / 'UPDATE - KO'.
      ELSE.
        WRITE : / 'UPDATE - OK'.
      ENDIF.
    WHEN 'I'. "Insert
      gb01-bcltab = p_table.
      gb01-bclfield = p_field.
      gb01-boolclass = p_class.
      gb01-classtype = p_cltyp.
      gb01-bexclude = p_excld.
      INSERT INTO gb01 VALUES gb01.
      IF sy-subrc NE 0.
        WRITE : / 'INSERTION - KO'.
      ELSE.
        WRITE : / 'INSERTION - OK'.
      ENDIF.
    WHEN 'D'. "Delete
      DELETE FROM gb01
      WHERE bcltab = p_table
      AND bclfield = p_field
      AND boolclass = p_class
      AND classtype = p_cltyp.
      IF sy-subrc NE 0.
        WRITE : / 'DELETE - KO'.
      ELSE.
        WRITE : / 'DELETE - OK'.
      ENDIF.
ENDCASE.
*&      Form get_modifid
      F4 Help for modif id field
FORM get_modifid.
i_mid-mid = 'U'.
i_mid-text = 'Update'.
APPEND i_mid.
i_mid-mid = 'I'.
i_mid-text = 'Insert'.
APPEND i_mid.
i_mid-mid = 'D'.
i_mid-text = 'Delete'.
APPEND i_mid.
CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
       EXPORTING
            endpos_col   = '20'
            endpos_row   = '12'
            startpos_col = '10'
            startpos_row = '10'
            titletext    = 'Modification Ids'
       IMPORTING
            choise       = v_tabix
       TABLES
            valuetab     = i_mid
       EXCEPTIONS
            break_off    = 1
            OTHERS       = 2.
IF sy-subrc NE 0.
    EXIT.
ENDIF.
READ TABLE i_mid INDEX v_tabix.
IF sy-subrc EQ 0.
    p_modif = i_mid-mid.
ENDIF.
REFRESH i_mid.
ENDFORM.                    " get_modifid
Regards,
Rajesh.

Hi Rajesh,
Hey here are some of the links, please chek these links u have lot of examples
http://www.****************/Tutorials/OOPS/MainPage.htm
and also please check these threads
OOABAP
book for OOABAP?
Best regards,
raam

Extremely long build times using object oriented code

We have a LabVIEW application that we need to build an .exe for distrubution purposes. The application relies on several object-oriented classes for data handling and dynamic dispatch type casting and function selection. Currently it takes approximately 1.5 hours to build the application and it seems that most of the time is spent processing the object oriented files. Has anyone else seen this issue and are there any creative ways to improve the build times?

Hi again. We are still having issues using LVOOP due to extrmely long .exe build times as well as long labview loading times. I traced the source of this to one class hierarchy, shown below. This hierarchy also relies heavily on overriding top-level functions, declared as virtual VIs in the top level class, which I suspect contributes to this problem. While debugging another issue, I was trying to build a small piece of my main code into an .exe to verify its functionality and experienced the same extremely long build times. When I removed this class hierarchy from the VI, it built extremely fast. Also to be clear, I am using neither the mean function or Mean.vi anywhere in this set of code. To date we have been delighted with LVOOP and how it has made our code cleaner, mroe robust, and more maintanable. However, when creating new functionality in the code we often elect NOT to create new objects (even though they would be beneficial) because we are hesitant to introduce the extra time (load and build) required for LabVIEW to handle these classes. If our entire system was rewritten in LVOOP, I would suspect that it would become unmaintainable and unbuildable due to the LVOOP overhead. I was hoping that LV2009 would address some of these issues but, alas, it did not. Still looking for a way to improve this and thanks in advance for all of the replies.

Can I reuse timeline and objects by code?

I'm practicing with edge and I make a little animation with one box, all in design time, no code at this time. My idea and my question is if now I can to implement code for to clone that box and reuse all animations created in timeline for the new objects.
Practice: dissenys.cat/practice/greensock.html
Note: the name of .html is because I will like practice with this library.

Yes, you help me. Thx.
But it's a little complicated for me, I prefer YOSHIOKA Ume method: "every time change rotate value, record your rotate value to variable" like this:
// Using jquery rotate https://code.google.com/p/jqueryrotate/
yepnope({
nope:"jQueryRotate.js"
var degrees=30; // In my example this button increment rotation rectangle in 30º
var rotAct = sym.$("Rectangle").data("rotation");
rotAct = (rotAct==undefined)? degrees: rotAct+degrees; //check rotAct
// console.log(rotAct);
sym.$("Rectangle").data("rotation",rotAct).rotate({animateTo:rotAct, duration:1000, easing: $.easing.easeInOutExpo});

Does access scope change the way Object oriented code compiles or executes

I have started using Acess Scope (Private/Public/Protected/Friend) in my code and I am wondering if ti changes the way the software is compiled and executed.
I am suffering a 6 minute pre-load startup time and am scrambling to find aything that helps.
Tim L.
iTm - Senior Systems Engineer
uses: LABVIEW 2012 SP1 x86 on Windows 7 x64. cFP, cRIO, PXI-RT

Hi Timmar,
I don’t think that the Access Scope is the cause of this long pre-load time. However, you can try to set to public in order to see if that makes any change.
I think this long pre-load time could be related to how many files (VIs and dependencies) are included in your project. Also, if you move the Project folder to a different location (or computer) the next time that you try to open the project it will take a little while to open.
Regards,
Richard.

UML diagrams and Object Oriented programming

In a project for CSC120 at school we have to program a casino using java. We were given a UML diagram of how the professor wants it set up, and I am having some difficulty understanding exactly what some of this means, code wise.
Part of the UML diagram:
Game
userMoney: int
bet: int
playAgain() : bool
askBet() : int
Payout(amt: void) : void
takeBet(amt:void) : bool
I understand the first two blocks, but the last one confuses me. I get that these are the different functions the class will use, but what does the text inside the parentheses mean, and the text after the colon? And what would this look like in code? If someone could post a link to an example program it would greatly help, or just post a simple example here.
Here is what I have so far in the class file:
* ASCIIcasino.java
* Version 1.0
* Alachine
* Last Modified: 01/19/2006
public class Game
     int usermoney;
     int bet;
    public boolean playAgain()
    public int askBet ()
         do
               System.out.println("How much do you wish to bet?");
               scannergameinput = new Scanner(System.in);
          while(!scannergameinput.hasNextInt());
          bet = scannergameinput.nextInt();
          System.out.print("Your bet: ");
         return bet;
    public void Payout ()
         int amt;
    public boolean takeBet ()
         int amt;
}Am I doing this correctly so far, or what am I not getting? Thank you for your time.
Edited to update code.
Message was edited by:
Alachine

playAgain() : bool
askBet() : int
Payout(amt: void) : void
takeBet(amt:void) : boolThese are methods of the "Game" class, and what is inside parentheses are called parameters.
"void" and "bool" are return types.
public boolean playAgain()
    }In this code you have specified boolean as a return type, so you need to return a value of type bool.
As for the void part, you don't need to return anything.
Code should look like:
public boolean playAgain()
         return true; //Or return false
public void Payout ()
         int amt;
    }You need to get :int amt" in the parameters, and since its voide nothing needs to be returned.
public void Payout (int amt)
    }

What is the difference between function groups and Object Orientation

Hello all
I have read about this on the help.sap.com site, I still do not understand it completely, can some one explain me with a simple example please ? (Not the increment counter example please !).
Thanks a ton.
Rgds
Sameer

Hello Sameer
When you call a module of a function group for the first time in your program then the entire function group is loaded. However, this can happen only once within your report and all global variables within the function group will have the same values all the time (except they are manipulated via fm's).
In contrast, you can create as many instances of the same class as you want and all of them can have different global attributes. And all these instances are independent of each other.
On the other hand, if fm_A changes global attributes of the function group and fm_B reads these attributes then fm_B read the changed values.
Or in other words:
Function Group = can be instantiated only ONCE
Class = can be instantiated unlimited
Regards
Uwe

Object orientated, serious help needed

Hi all Im very new to java and I would like to know how I could be this object orientated code into java;
Room
-length: int
-width: int
+Room( aLength: int, aWidth:
+getLength(): int
+getWidth(): int
+getArea(): int
Thx, I know its proably simple But I have be struggling to get this code to run, thanks in advance

I know its UML im having trouble turning this UML into java,
If I do
public class Room
private int length;
private int width;
then length and width are underlined. Yup your IDE concluded that those private member variables aren't
used, not set anywhere in that class, that's what those warning/error
lines are all about.
Can I carry on even though they are underlined.And also if someone
could show how I would put;
+Room( aLength: int, aWidth: int)
into java and should be ok from here, thx in advanceThe transformation is almost mechanical:public class Room {
   private int length;
   private int width;
   public Room(int aLength, int aWidth) {
      length= aLength;
      width = aWidth;
}kind regards,
Jos

Communication between javascript and Objective-c in iOS.

We wanted to have a communication between javascript and objective c code. We have already tried the below approach.
To load fake URLs in JS and append a string which will be used as parameter to the Objective-C code and parse that URL in this delegate method:
-(BOOL)webView(UIWebView *)webView shouldStartLoadWithRequest(NSURLRequest *)request navigationType(UIWebViewNavigationType)navigationType
Then send the return value by calling the native method stringByEvaluatingJavaScriptFromString again with parameter callID.
But we wanted to access Objective class object in Javascript code so that we can call it's methods from javascript code using this object.Android supports this behaviour using addJavaScriptInterface method in webview. Is it possible to have the similar approach in IOS? If not what is the best approach possible to acheive this? If we could achieve similar behaviour then we don't need to change the Jacascript code and will be reused. Please suggest the best possible solution.
Regards,
Karthik M.

https://developer.apple.com/library/mac/documentation/AppleApplications/Conceptu al/SafariJSProgTopics/Tasks/ObjCFromJavaScript.html

Object oriented Concept

Hi all, I feel confuse on object oriented.
Basic, I get change to developer some online form. I use java bean , Servlet, JSTL and Mysql. In my java bean I only have the attribute set and get pattern. I just wonder I put my delete , search and update action on Servlet , not in the java bean , is that means that Is not object oriented enough? How to improve it ?
thank you!

Thank you for the reply, I did use some of the Spring in my Project, but only limit in flower control , such as simple spring + acegi , a lot of control still in servlet. I also try some other new stuff like display tag , but that only work on if your jsp page is out of the WEB-INF. I also go through some tutorials on JSF , but not time to figure out how JSF work with acegi yet.
1 mention the display tag and JSF just try to explain, I looking for a new framework. But don?t want the whole framework to tire me up. For example in simple servlet I can use ? /WEB-INF/ + target to send my flower to any JSP page depend on the link that I click , but I don?t how to handle it spring. May be I did not get the real concept of spring yet. I looking for some framework that allow me to use new technology , but still allow me to use some old technology , like servlet then I can finish my project on time.
But what is the relation between web framework and object oriented concept??

Can I develop a 100% Object Oriented DB with Oracle 11?

Hello!
I want to know if I can develop a 100% object oriented data base in Oracle 10g or 11? I have reed the "Oracle Database 11g The Complete Reference" chapter 41 "Advanced Object-
Oriented Concepts" and I still have the doubt if I can implement a database 100% object-oriented. I hope you can help me.
Thanks!

>
I want to know if I can develop a 100% object oriented data base in Oracle 10g or 11?
>
The short answer is no.
See this AskTom blog for the long answer.
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1545206281987
It starts off with Tom saying
>
First off, in Oracle you would be considering pure relational versus Object RELATIONAL,
not OO. We have object relational extensions to the relational database. We do not have
an object oriented database.
>
I think you will find a lot of infomation in there from Tom and other respondents about the differences between relational, object relational and object oriented.

Anyone recommends a good book for object oriented programming

I am a college student in computer engineering (Software) and have been programming using Java for over a year. I have become really interested in the design of softwares and the "beauty" of object oriented programming, and thus would like to advance my knowledge about the topic (my university offers an advanced oop class but I would have to wait another 6 months to take it). So my question is, could you recommend me any book that covers the subject of object oriented programming extensively? (I have learned most of the oop I know from "An Introduction to Programming and Object Oriented Design Using Java" by Nino and Hosch.
Thanks in advance

Some years ago I remember cutting my teeth on OOP using an excellent book by Grady Booch. If it's still in print and has been updated, it may be worth a look. Again it was decent. Also consider picking up a book on design patterns. Good luck.
Edit: I found it, it's called "Object-Oriented Analysis and Design with Applications", and it's in its third edition. You can find it here on Amazon.
Edited by: Encephalopathic on Apr 22, 2008 2:48 PM

Anyone recommends a good book for object oriented programming (advanced)

I am a college student in computer engineering (Software) and have been programming using Java for over a year. I have become really interested in the design of softwares and the "beauty" of object oriented programming, and thus would like to advance my knowledge about the topic (my university offers an advanced oop class but I would have to wait another 6 months to take it). So my question is, could you recommend me any book that covers the subject of object oriented programming extensively? (I have learned most of the oop I know from "An Introduction to Programming and Object Oriented Design Using Java" by Nino and Hosch.
Thanks in advance

jwenting wrote:
I never tire of pushing ["Agile Software Development, Principles, Patterns, and Practices "|http://www.amazon.com/Software-Development-Principles-Patterns-Practices/dp/0135974445] by Robert Martin.
You probably meant [Agile Software Development, Principles, Patterns, and Practices|http://www.amazon.com/Software-Development-Principles-Patterns-Practices/dp/0135974445] ;-)
Remember, quotes in link names break the forum ...

Mathscript and object oriented code m code

Similar Messages

Maybe you are looking for