Matrix and monitor

We use a matrix consolidation scenario. A legal company is only assigned (matrix view) certain profit centers. Now several months later additional profit centers are needed. So I add them (mark the checkbox) in that matrix view. However, having a look at the monitor of prior periods I do see that very legal entity as yellow and not as blocked. Why:
Actually I do not see one legal entitiy, I see 1 or more consolidation unit combinations. I do understand that. However, we do believe it has to be possible to maintain that hierarchy time dependent, to avoid these status changes in prior periods.
Do you have any advice?
regards, Clemens
I do not need any time-dependent attributes, hence I do not use that DSO.

Dan, thx for your (almost immidiate) reply...
We have legal entity. Legal company is one dimension in matrix scenario. InfoObject is time and version dependent. Same for the second axis, so in our case profit center.
These to individual hierarchies work perfectly.
However, I refer to something slightly different. I refer to "combination of consolidation units", there you get 3 tabs. in the thrid tab you can mark which combinations are active. That very "function" is neither time nor version dependent.
The DSO I was referring to is found under:
Data Basis --> Data Model --> Characters of Role Consolidation unit, there the second and third field.
I believe that DSO functionality is not needed, I do not want any attribute (e.g. the name of the line manager responsible for a legal entitity / profit center combination).
Clemens

Similar Messages

Help desiging a 10g Oracle Report with Matrix and Lexical Parameters - Long

Hello all:
I apologize in advance for this long post.... I'm using Oracle Reports 10g (9.0.4.0.33). First -- the question:
I need to create a Matrix where the rows come from one database table
(TABLE1) and the columns and cell contents come from a linked query (pulled from TABLE2) that is generated with lexical parameters based on the current TABLE1 row. The lexical parameters contain a WHERE clause for the TABLE2 query. Basically, I have a linked query between TABLE1 and TABLE2. I need to generate a Matrix around it.
Does anyone know if this is even possible?
Here's the background on the application, if that is helpful...
I have an application where I maintain database tables containing names/addresses along with information pertaining to them. As part of the processing, I need to produce reports that contain statistics based on values in the table. For example, each row has a field RTYPE that identifies the Record Type (1-Suppress, 2-Buyer, 3-Inquirer). Each row also has a last purchase date field. The statistics produced for this field would look like this:
          2001     2002     2003     11/03     12/03 01/04     02/04 03/04     04/04     05/04 ...
Buyer      100 150 250 30 25 15 8 9 22 83
Inquirer     1000 800 493 ...
Suppress ... ...
Totals ... ...
Each cell contains the count of the number of records that have the corresponding RTYPE and Last Purchase date. The dates across the top are determined by the most recent purchase date in the file. We count the last 12 months, month by month, and then anything older than that is grouped by
year of purchase. So, the column headings are variable.
The SQL query for this example looks like this:
SELECT CASE WHEN rtype = '2' THEN 'Buyers'
WHEN rtype = '3' THEN 'Inquirers'
WHEN rtype = '1' THEN 'Suppress'
END HLDESC,
CASE WHEN MONTHS_BETWEEN(trunc(:MAXHLDATE,'MONTH'),
TRUNC(T.HOTLINE,'MONTH')) < 12
THEN TO_CHAR(T.HOTLINE,'YYYYMM')
ELSE TO_CHAR(T.HOTLINE,'YYYY') || '00'
END YYMM_8,
CASE WHEN MONTHS_BETWEEN(trunc(:MAXHLDATE,'MONTH'),
TRUNC(T.HOTLINE,'MONTH')) < 12
THEN TO_CHAR(T.HOTLINE,'MM/YY')
ELSE TO_CHAR(T.HOTLINE, 'YYYY')
END FmtDate_8,
COUNT(*) HLCOUNT
FROM &TABLENAME T
GROUP BY CASE WHEN rtype = '2' THEN 'Buyers'
WHEN rtype = '3' THEN 'Inquirers'
WHEN rtype = '1' THEN 'Suppress'
END,
CASE WHEN MONTHS_BETWEEN(trunc(:MAXHLDATE,'MONTH'),
TRUNC(T.HOTLINE,'MONTH')) < 12
THEN TO_CHAR(T.HOTLINE,'YYYYMM')
ELSE TO_CHAR(T.HOTLINE,'YYYY') || '00'
END,
CASE WHEN MONTHS_BETWEEN(trunc(:MAXHLDATE,'MONTH'),
TRUNC(T.HOTLINE,'MONTH')) < 12
THEN TO_CHAR(T.HOTLINE,'MM/YY')
ELSE TO_CHAR(T.HOTLINE, 'YYYY')
END
ORDER BY CASE WHEN MONTHS_BETWEEN(trunc(:MAXHLDATE,'MONTH'),
TRUNC(T.HOTLINE,'MONTH')) < 12
THEN TO_CHAR(T.HOTLINE,'YYYYMM')
ELSE TO_CHAR(T.HOTLINE,'YYYY') || '00'
END
There might be a better way to write this, but that isn't the issue at the moment.
I have many different tables, each with different fields. I need to produce counts on each of those fields. Some of those fields have a limited number of values where I need to count the occurrences and attach a description (like the RTYPE counts above). Others, like Last Purchase Amount, require counts within ranges (between 0 and 9.99, 10 and 19.99, etc.). Still others are "multiple choice"-style fields (such as products purchased), where we have multiple single-char flags that are not null when the corresponding products are purchased. In this case, we need to produce statistics that look like this:
          2001     2002     2003     11/03     12/03 01/04     02/04 03/04     04/04     05/04 ...
Product 1 .........
Product 2 .........
The worst of the bunch is a field where I need to count the occurrence of each value within it (hundreds of values) without entering descriptions, so I don't know how many rows will appear ahead of time. This is used for "source codes" that identify where the name/address came from. They look similar to the RTYPE above, but the leftmost column contains each value from the field rather than a description. There are so many possible values and they change so often that it isn't feasible to enter a description for each one.
Right now, I manually create an Oracle Report for each table when I design/load it. This is becoming difficult to manage, since I have over 150 of them now. Each of these reports can have any number of matrices to display (the largest right now has about 25).
The new table structure to generate these reports consists of two tables: A COUNTHDR table and a COUNTROW table. The COUNTHDR table represents a single Matrix within the report. It contains info such as a heading for the Matrix and whether column totals should be calculated or not. The COUNTROW table contains a description for each row and an SQL Fragment that contains an appropriate WHERE clause to match the description. In the event of a "source code" style count, COUNTHDR has the name of the field to count. COUNTROWs won't exist, so I'll be handling those counts differently. But, ignoring that issue for now, the report structure looks like this:
+ Q1 +
|
+ COUNTHDR +
|
+ COUNTROW +
| linked query
+ Q2 +
|
+ COUNTDTL +
Q2 is the query with lexical parameters for the table and "where clause" that identifies the actual statistic I need counted. I need fields from COUNTROW and COUNTDTL to form a Matrix.
Can this be done? How?
Of course, if anyone out there has a better idea on how to achieve my goal of not writing a report per table, please let me know!! :-)
TIA
Eric Raskin
PS. This structure does not exactly duplicate my original query, since multiple Matrix rows are created by the single SQL query given in the example. Instead, I'll end up executing an SQL query for each row, which is less than desirable. The design will need some tweaking...
PPS. I have tried handling this problem by pre-counting the target table and storing the results in a COUNTCOL table, containing the details of the matrix. This actually does work, but the performance is terrible. I have one "source code"-style count that generated over 20,000 detail cells, including all the "0" cells needed to fill out the matrix. If you don't generate the "0" cells, you get holes in the matrix presentation and/or error messages (which I can explain if you wish). I never did get Oracle Reports to print this one -- I gave up after an hour of runtime on a P4 3GHz machine connected via Gigabit Ethernet to the server. Hence the attempt to push the SQL Queries back into the Oracle Report itself.
Eric H. Raskin Voice: 914-765-0500
Professional Advertising Systems Inc. Fax: 914-765-0503
200 Business Park Dr Suite 107 [email protected]
Armonk, NY 10504

Hi there
here's example of my code
Html header of the page :
<script language="JavaScript" type="text/javascript">
function callMyPopup (formItem1,formItem2) {
var formVal1 = document.getElementById(formItem1).value;
var formVal2 = document.getElementById(formItem2).value;
var url;
url = 'f?p=&APP_ID.:8:&APP_SESSION.::::P8_PROJECT,P8_PDRL_NO:' + formVal1 + ',' + formVal2;
w = open(url,"winLov","Scrollbars=1,resizable=1,width=800,height=600");
if (w.opener == null)
w.opener = self;
w.focus();
</script>
troubleshooting
1.Test each parameter separate first - each work ?
2.Use code above, rerig it, create multiple parameter
3.try again...
hope this helps...
check your orginial source (page where items are) - what data

What is the best product for network mapping and monitoring? I am an inexperienced user). Mac 10.9.2 laptop

I have lots of questions, but the gist is that I want to know the best product, preferably from the app store, that I can use for network mapping mapping and monitoring.
I want to get their mac address or other police trackable etc info so I can use my computer safely.
I am also being cyberbullied.
I try just using ethernet but still get intruded on, for instance, messages that "other devices are using my ip address". The only other device I own is an iPod that I keep sahut off plus wifi turned off then.
(NOTE: You can skip the rest of this message if you want. It regards hacking attempts etc, a little out of the scope of discussion, perhaps).
Also a home intrusion where computer was thoroughly hacked with router(s) set up "very very close to me," according to Apple.
Also, hackers get into my Facebook and gmail and yahoo mail, really, no matter what I try to do on my computer and how many times I change passwords it does no good.
Also, The ip addresses for google and the one in syste preferences and the one looking up my ip address on ip chicken always gets three different results.
More worrisome it that hackers got into my Wells Fargo account a week after the intrusion even though I changed all account #'s and pw plus notified bank. They also broke into paypal using my new account numbers.
Also, stuff like Facetime pops up on my computer without my clicking on it even though I'm using ethernet to connect. I've given up on Time Capsule because I'm told that's how the hackers hacked my computer so thoroughly duriung the intrusion.
Thanks.

Aubry,
why don't you send your sequences straight to Compressor first, encode your movies as MPEG 2 and AC3 audio and import all assets in DVD studio PRO?
G.

Dataset query issues twice if the dataset is connected to matrix and used in multilookup function

hello everybody.
could not find any information if this is an intended behavior:
dataset query issues twice if the dataset is connected to matrix and used in multilookup function
parameters in both queries are the same
ssrs: 2008 r2, sharepoint 2010 integrated
sharepoint 2010: september 2014 cu
thanks in advance
Sergey Vdovin

Hello, Wendy.
I prepared a very empty sample report for you to demonstrate the problem - with this report, i hope, there is no place to discuss the shrinking of time data retrieval.
There is one dataset, one parameter and one lookup function. The query is executed twice.
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner" xmlns:cl="http://schemas.microsoft.com/sqlserver/reporting/2010/01/componentdefinition" xmlns="http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition">
<AutoRefresh>0</AutoRefresh>
<DataSources>
<DataSource Name="DataSource1">
<DataSourceReference>http://t005/ProjectBICenter/DocLib/IntegrationDBVdovin.rsds</DataSourceReference>
<rd:SecurityType>None</rd:SecurityType>
<rd:DataSourceID>7e554344-d6c2-48a5-a7f4-1d24608cb4b5</rd:DataSourceID>
</DataSource>
</DataSources>
<DataSets>
<DataSet Name="DataSet1">
<Query>
<DataSourceName>DataSource1</DataSourceName>
<CommandText>select 1 as temp, '$' as tempname</CommandText>
<rd:UseGenericDesigner>true</rd:UseGenericDesigner>
</Query>
<Fields>
<Field Name="temp">
<DataField>temp</DataField>
<rd:TypeName>System.Int32</rd:TypeName>
</Field>
<Field Name="tempname">
<DataField>tempname</DataField>
<rd:TypeName>System.String</rd:TypeName>
</Field>
</Fields>
</DataSet>
</DataSets>
<ReportSections>
<ReportSection>
<Body>
<ReportItems>
<Textbox Name="ReportTitle">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Lookup(1,Fields!temp.Value,Fields!tempname.Value,"DataSet1")</Value>
<Style>
<FontFamily>Verdana</FontFamily>
<FontSize>20pt</FontSize>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:WatermarkTextbox>Title</rd:WatermarkTextbox>
<rd:DefaultName>ReportTitle</rd:DefaultName>
<Top>0mm</Top>
<Height>10.16mm</Height>
<Width>139.7mm</Width>
<Style>
<Border>
<Style>None</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</ReportItems>
<Height>57.15mm</Height>
<Style>
<Border>
<Style>None</Style>
</Border>
</Style>
</Body>
<Width>152.4mm</Width>
<Page>
<PageFooter>
<Height>11.43mm</Height>
<PrintOnFirstPage>true</PrintOnFirstPage>
<PrintOnLastPage>true</PrintOnLastPage>
<Style>
<Border>
<Style>None</Style>
</Border>
</Style>
</PageFooter>
<PageHeight>29.7cm</PageHeight>
<PageWidth>21cm</PageWidth>
<LeftMargin>2cm</LeftMargin>
<RightMargin>2cm</RightMargin>
<TopMargin>2cm</TopMargin>
<BottomMargin>2cm</BottomMargin>
<ColumnSpacing>0.13cm</ColumnSpacing>
<Style />
</Page>
</ReportSection>
</ReportSections>
<ReportParameters>
<ReportParameter Name="ReportParameter1">
<DataType>String</DataType>
<DefaultValue>
<Values>
<Value>1</Value>
</Values>
</DefaultValue>
<Prompt>ReportParameter1</Prompt>
<ValidValues>
<DataSetReference>
<DataSetName>DataSet1</DataSetName>
<ValueField>temp</ValueField>
<LabelField>tempname</LabelField>
</DataSetReference>
</ValidValues>
</ReportParameter>
</ReportParameters>
<rd:ReportUnitType>Mm</rd:ReportUnitType>
<rd:ReportServerUrl>http://t005/ProjectBICenter</rd:ReportServerUrl>
<rd:ReportID>cd1262ef-eca7-4739-a2ce-d3ca832d5cd6</rd:ReportID>
</Report>
Sergey Vdovin

Create Remote Control and Monitor VI

Hi all,
I have 2 VIs. One is PC Host VI and other is cFP2200 real-time running VI.
Now I can use PC host and cFP shared variable to control and monitor in the same network.
But I have a problem that I need 2 or more cFP in the same network.How can I seprate to control themone by one?
They are using the same program but set with different IP.
Does shared variables are using fix IP and can I type the cFP2000 network IP in PC Host VI to select different cFP?
How to do ?
Thanks.
Robert

Hello Robert,
You will need to use a separate shared variable for each cFP. You can create a Case Structure in your Host VI to select which shared variable to use based on which cFP you select. I think that's the simplest option for you.
There is also a way to programmatically change the data binding for a shared variable, but this requires the DSC Module. Take a look at this article if you want to check out this option: http://digital.ni.com/public.nsf/allkb/2E8BAD0EA218A7558625712E0003F044?OpenDocument
Product Support Engineer
National Instruments

How to connect an external hard drive and monitor a single port thuderbolt

how to connect an external hard drive and monitor a single port thuderbolt

Yu connect the HDD to your Mac and then the monitor to the HDD.
The HDD should have TWO T-Bird ports on the enclosure.
Its called daisy chaining and up to five devices can be connected in this fashion.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Have a problem with my MacBook Pro.5,3 and monitor. Intermittently, the desk top screen becomes broken up into vertical sections, which appear in the wrong order, creating a haphazard picture. The Apple icon, usually at top left corner, appears in to

have a problem with my MacBook Pro.5,3 and monitor. Intermittently, the desk top screen becomes broken up into vertical sections, which appear in the wrong order, creating a haphazard picture.
The Apple icon, usually at top left corner, appears in top right corner in a strip including all that left hand. When the computer is restarted, the screen goes back to normal. But I have to move the mouse to the far left of the screen and then up until it reappears on the far right hand side of the screen so that I can hit shut down button.
It seems to happen randomly though always on desk top and sometimes when I move mouse and computer switches on from rest mode. My large flat screen is relatively new.
The video card on this computer, which is approximately two years old, is Nvidia FeForce 9400M.
Any help would be welcome as my usual source of assistance is not available and I am not well versed in workings of the Mac although I have used one for many years.

That sounds like a Hardware problem.
You may be able to confirm that with Apple Hardware Test, or make an appointmenst for a free Genius Bar evaluation.

How to install the windows7 agent and monitor the same machine

Hi ,
I have installed OMS on Oracle Linux 5.7-64 bit machine. Now I am able monitor the OIM which is installed on Linux. I have some of oracle applications (domains) on windows7 machine. I want monitor the same. On em, agent deployment page I am not able to see the windows agents.
Can you please guide me how to install the agent on windows and monitor the same?
OEM version: 11.1.0.1
Thanks in advance
Regards,
Kishore Tummeti

If you just need to install some agents on Windows the best (imho) option is not to use the push option because getting Cygwin to run can take hours (if at all).
Here you find a good instruction how to install the agent by hand: http://www.peasland.net/?p=122
Sometimes the –silent mentioned in step 4b needs not to be put as second argument but as last argument.
Eric

Performance analysis and monitoring of a Forteapplication

Hello,
It would be good if one could do some performance analysis and monitoring of
a Forte application at production time.
By performance analysis I mean measure the time some selected methods take
to return. In a CS application such a method would be some selected method
of a key remote service representative of the application's activity.
One would like to mesure the min, max, average time, and also give a
threshhold which when reached will automatically generate an alarm or some
pre-defined processing.
The most powerful way would be to use a SNMP application through a Forte -
SNMP gateway. (see the G. Puterbaugh paper "Building a Forte-SNMP gateway"
in the 96' Forte Forum proceedings).
But before going that far some simple means accessible through EConsole
would already be great.
A collegue of mine when to that Forum and reported that Puterbaugh said that
such an agent is currently missing, but that its implementation is not
difficult.
I looked at all the agents and their instruments. I came to the following
conclusions :
1) instrumented data are available at the granularity level of a partition,
not at a smaller granularity. For example, the DistObjectMgr agent gives you
very useful information : the number of events (sent/received) and the
number of (remote) methods (called/invoked), but this for the entire
partition. Thus it prevents making tuned observations (unless you partition
in a special way your application to put in a dedicated partition the thing
you want to observe and only this thing).
2) there is no instrumented data related to processing time.
This leads me to the point that no information observed by the standard
agents help me figuring out my performances. Thus I have to add at
development time some lines of code to the methods I potentially want to
observe later at production time to generate the appropriate information a
custom agent will then display (process) with the appropriate instruments.
Does someone share this position ?
Has someone implemented such an agent and assotiated means ?
PS: I will probably implement my own one if no other way around.
best regards,
Pierre Gelli
ADP GSI
Payroll and Human Resources Management
72-78, Grande Rue, F-92310 SEVRES
phone : +33 1 41 14 86 42 (direct) +33 1 41 14 85 00 (reception desk)
fax : +33 1 41 14 85 99

Hello,
It would be good if one could do some performance analysis and monitoring of
a Forte application at production time.
By performance analysis I mean measure the time some selected methods take
to return. In a CS application such a method would be some selected method
of a key remote service representative of the application's activity.
One would like to mesure the min, max, average time, and also give a
threshhold which when reached will automatically generate an alarm or some
pre-defined processing.
The most powerful way would be to use a SNMP application through a Forte -
SNMP gateway. (see the G. Puterbaugh paper "Building a Forte-SNMP gateway"
in the 96' Forte Forum proceedings).
But before going that far some simple means accessible through EConsole
would already be great.
A collegue of mine when to that Forum and reported that Puterbaugh said that
such an agent is currently missing, but that its implementation is not
difficult.
I looked at all the agents and their instruments. I came to the following
conclusions :
1) instrumented data are available at the granularity level of a partition,
not at a smaller granularity. For example, the DistObjectMgr agent gives you
very useful information : the number of events (sent/received) and the
number of (remote) methods (called/invoked), but this for the entire
partition. Thus it prevents making tuned observations (unless you partition
in a special way your application to put in a dedicated partition the thing
you want to observe and only this thing).
2) there is no instrumented data related to processing time.
This leads me to the point that no information observed by the standard
agents help me figuring out my performances. Thus I have to add at
development time some lines of code to the methods I potentially want to
observe later at production time to generate the appropriate information a
custom agent will then display (process) with the appropriate instruments.
Does someone share this position ?
Has someone implemented such an agent and assotiated means ?
PS: I will probably implement my own one if no other way around.
best regards,
Pierre Gelli
ADP GSI
Payroll and Human Resources Management
72-78, Grande Rue, F-92310 SEVRES
phone : +33 1 41 14 86 42 (direct) +33 1 41 14 85 00 (reception desk)
fax : +33 1 41 14 85 99

How to give browse and monitor only options of an ICM script to a certain group?

I am looking for an option in the Feature Control Set, how to give "Browse and Monitor" only options for a certain group in our contact centre. If someone give me some clue, it would be appreciatable.

Hello Praveen,
This work at some point. But it's not resolving what I intend to do. When I give "Read Only" previledge, to the certain group, it won't be able to do other tasks what they do day to day. I am looking specifically to give read only previledge in the scripting level. Not at the configuration level.
Thanks.

Mapping and Monitoring all the User and the Field exits

Hello Dears,
Are possible, with the Solution Manager to map and monitor all the user and the field exists existing in my ECC6 Productivity Environment?
Anyone has some documentation?
Regards to all.
FS.

Hello Gurus,
Someone has any information about this question?
Regards to all.
FS.

Autonomy, Governance and Monitoring Inter Organisational BPM

Hi All,
Which technological approach is suitable for implementing Collaborating BPM across the value chain from the point of view of Autonomy, Governance, Security, and Monitoring? What are the benefits of selecting the one approach over the other?
These approaches are Centralise, Decentralise, and Peer-to-Peer.
Explanation of these approaches:
Centralise CBPM: Ownership of Collaborative System is with one Central Organisation and other Partners Participate in this collaboration through use of various UI’s such as portal. Example, Collaboration between the automobile manufacturer and dealer were automobile manufacturer provides portal for dealer to place order, manage its customer and handle warranty and recalls.
Decentralise CBPM: In this approach every partner provides communication technology like Web Services for its Business Partner for collaboration. The ownership is decentralise and more flexible
Peer-to-Peer CBPM: In ideal condition in this approach every Partner should have the same technology which is developed for handling collaborative Business Processes. In this case the same modelling, monitoring, and implementation technology is available across the value chain.
I kindly request your views and appreciate any questions and guidance.
Regards,
Ganesh Sawant

PROS:
Using the Webservices you can trigger the BPM Process and pass the values from the web dypro component which will available for the end user and pass it on to the BPM Proess.
We can use EJB as a webservice, where the automated activity in the BPM can output the value based on the logic in the EJB Function. We can manage the automated activity which runs in the back ground of the process as per our logic and returns the value to the next task.
CONS
Using Webservices in the various activity with fewer data is not advisable as it takes longer time to deploy the process. And any change in the data in the webservices requires regularly re importing of the web services.

Autonomy, Governance and Monitoring in Inter Organisational BPM

Which technological approach is suitable for implementing Collaborating BPM across the value chain from the point of view of Autonomy, Governance, Security, and Monitoring? What are the benefits of selecting the one approach over the other?
These approaches are Centralise, Decentralise, and Peer-to-Peer.
Explanation of these approaches:
Centralise CBPM: Ownership of Collaborative System is with one Central Organisation and other Partners Participate in this collaboration through use of various UIu2019s such as portal. Example, Collaboration between the automobile manufacturer and dealer were automobile manufacturer provides portal for dealer to place order, manage its customer and handle warranty and recalls.
Decentralise CBPM: In this approach every partner provides communication technology like Web Services for its Business Partner for collaboration. The ownership is decentralise and more flexible
Peer-to-Peer CBPM: In ideal condition in this approach every Partner should have the same technology which is developed for handling collaborative Business Processes. In this case the same modelling, monitoring, and implementation technology is available across the value chain.
I kindly request your views and appreciate any questions and guidance.
Regards,
Ganesh Sawant

PROS:
Using the Webservices you can trigger the BPM Process and pass the values from the web dypro component which will available for the end user and pass it on to the BPM Proess.
We can use EJB as a webservice, where the automated activity in the BPM can output the value based on the logic in the EJB Function. We can manage the automated activity which runs in the back ground of the process as per our logic and returns the value to the next task.
CONS
Using Webservices in the various activity with fewer data is not advisable as it takes longer time to deploy the process. And any change in the data in the webservices requires regularly re importing of the web services.

Difference between Integration Process and Monitoring Process

Hi Experts,
What is the difference between Integration Process and Monitoring Process available in PI7.1?
SAP says that Monitoring process is a special kind of integration process that receives the event messages.
My doubt is even integration process can receive the event messages.
Why these two different type of entities are created for the same purpose?
And what is the technical difference between the two in terms of PI perspective?
Regards,
Sami.

My question is now answered.
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70a25d3a-e4fa-2a10-43b5-b4169ba3eb17]
On page 17 of this pdf following sentence is mentioned :-
From technical perspective, there is no difference between monitoring process and integration process.
Though logically those are two deifferent things.
Monitoring porcesses are used to receive only event messages that is comprises of event data only.
Like Purchase order creation is a event and its event message will have the event data like Order Id, Created on, Created by, Quantity etc., instead of whole purchase order.
Where as Integration Process is a way to provide solution in some specific circummtances like where we have to automate our process or where we need something in between for the course of communication.
Guys thanks for your precious time.
Regards,
Sami.

Matrix and monitor

Similar Messages

Maybe you are looking for