Dataset query issues twice if the dataset is connected to matrix and used in multilookup function
hello everybody.
could not find any information if this is an intended behavior:
dataset query issues twice if the dataset is connected to matrix and used in multilookup function
parameters in both queries are the same
ssrs: 2008 r2, sharepoint 2010 integrated
sharepoint 2010: september 2014 cu
thanks in advance
Sergey Vdovin
Hello, Wendy.
I prepared a very empty sample report for you to demonstrate the problem - with this report, i hope, there is no place to discuss the shrinking of time data retrieval.
There is one dataset, one parameter and one lookup function. The query is executed twice.
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner" xmlns:cl="http://schemas.microsoft.com/sqlserver/reporting/2010/01/componentdefinition" xmlns="http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition">
<AutoRefresh>0</AutoRefresh>
<DataSources>
<DataSource Name="DataSource1">
<DataSourceReference>http://t005/ProjectBICenter/DocLib/IntegrationDBVdovin.rsds</DataSourceReference>
<rd:SecurityType>None</rd:SecurityType>
<rd:DataSourceID>7e554344-d6c2-48a5-a7f4-1d24608cb4b5</rd:DataSourceID>
</DataSource>
</DataSources>
<DataSets>
<DataSet Name="DataSet1">
<Query>
<DataSourceName>DataSource1</DataSourceName>
<CommandText>select 1 as temp, '$' as tempname</CommandText>
<rd:UseGenericDesigner>true</rd:UseGenericDesigner>
</Query>
<Fields>
<Field Name="temp">
<DataField>temp</DataField>
<rd:TypeName>System.Int32</rd:TypeName>
</Field>
<Field Name="tempname">
<DataField>tempname</DataField>
<rd:TypeName>System.String</rd:TypeName>
</Field>
</Fields>
</DataSet>
</DataSets>
<ReportSections>
<ReportSection>
<Body>
<ReportItems>
<Textbox Name="ReportTitle">
<CanGrow>true</CanGrow>
<KeepTogether>true</KeepTogether>
<Paragraphs>
<Paragraph>
<TextRuns>
<TextRun>
<Value>=Lookup(1,Fields!temp.Value,Fields!tempname.Value,"DataSet1")</Value>
<Style>
<FontFamily>Verdana</FontFamily>
<FontSize>20pt</FontSize>
</Style>
</TextRun>
</TextRuns>
<Style />
</Paragraph>
</Paragraphs>
<rd:WatermarkTextbox>Title</rd:WatermarkTextbox>
<rd:DefaultName>ReportTitle</rd:DefaultName>
<Top>0mm</Top>
<Height>10.16mm</Height>
<Width>139.7mm</Width>
<Style>
<Border>
<Style>None</Style>
</Border>
<PaddingLeft>2pt</PaddingLeft>
<PaddingRight>2pt</PaddingRight>
<PaddingTop>2pt</PaddingTop>
<PaddingBottom>2pt</PaddingBottom>
</Style>
</Textbox>
</ReportItems>
<Height>57.15mm</Height>
<Style>
<Border>
<Style>None</Style>
</Border>
</Style>
</Body>
<Width>152.4mm</Width>
<Page>
<PageFooter>
<Height>11.43mm</Height>
<PrintOnFirstPage>true</PrintOnFirstPage>
<PrintOnLastPage>true</PrintOnLastPage>
<Style>
<Border>
<Style>None</Style>
</Border>
</Style>
</PageFooter>
<PageHeight>29.7cm</PageHeight>
<PageWidth>21cm</PageWidth>
<LeftMargin>2cm</LeftMargin>
<RightMargin>2cm</RightMargin>
<TopMargin>2cm</TopMargin>
<BottomMargin>2cm</BottomMargin>
<ColumnSpacing>0.13cm</ColumnSpacing>
<Style />
</Page>
</ReportSection>
</ReportSections>
<ReportParameters>
<ReportParameter Name="ReportParameter1">
<DataType>String</DataType>
<DefaultValue>
<Values>
<Value>1</Value>
</Values>
</DefaultValue>
<Prompt>ReportParameter1</Prompt>
<ValidValues>
<DataSetReference>
<DataSetName>DataSet1</DataSetName>
<ValueField>temp</ValueField>
<LabelField>tempname</LabelField>
</DataSetReference>
</ValidValues>
</ReportParameter>
</ReportParameters>
<rd:ReportUnitType>Mm</rd:ReportUnitType>
<rd:ReportServerUrl>http://t005/ProjectBICenter</rd:ReportServerUrl>
<rd:ReportID>cd1262ef-eca7-4739-a2ce-d3ca832d5cd6</rd:ReportID>
</Report>
Sergey Vdovin
Similar Messages
-
HT1918 I was charged £10.00 twice on the 11th march which I did not use, or have in my wallet
I was charged £10.00 twice on the 11 march which I did not use or have in my wallet, what do I do
You've checked the purchase history on your account : log into your account on your computer's iTunes via the Store > View Account menu option, you should then see a Purchase History section with a 'see all' link to the right of it. Click on that and you should then see a list of your purchases
If you didn't make the purchases, and nobody else has access to your account or devices and made them, then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
Does anyone else have issues with charging the 4? Both my daughter and I are experiencing issues.
Does anyone else have issues with charging the 4? Both my daughter and I are experiencing issues.HLDkro wrote:
our original ones got frayed and no longer work. Been buying USB charges from my local pharmacy.. Need a new one every 2-3 weeks. I went to Verizon and bought a compatable one and right now I have my phone balanced on the garbage can with the cord strategically placed for it to charge. The USB does not work pluged into a wall, however, the same cord does work in my car.
" I have my phone balanced on the garbage can with the cord strategically placed for it to charge."
Makes it sound like the charging port is damaged or loose. -
I am trying to get space on an external hard drive which has some old time machine back up files that I do not need but can not eliminate, even by going into the time machine, clicking on the backup file to be eliminated and using the drop down menu with the gear box symbol to eliminate
I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots. Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
See Pondini's page for more explanation: What are Local Snapshots? http://pondini.org/TM/FAQ.html
I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
You have tested the library on the external drive, and so your photos are save there.
The local TimeMachine snapshot probably now contains a backup of the moved library. Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots. -
I have an iMac7,1 computer with OS 10.6.8 and wish to use iCloud with it. Is this computer compatible with Apple OS 10.7.2, so I can download the new OS 10.7.2 and use iCloud on my iMac7,1?
Mac OS X 10.7 requires an Intel i3, i5, i7, Core 2 Duo and 2 GB ram...to download you need to call Apple at 1-800-MY-APPLE and pay $20 for a download code for the Mac App Store.
-
I would like to know if iphone 5 GSM model A1429 is unlocked and is available in stores in the US in order to buy and use in Europe. Please let me know.
Thanks
STNot officially for sale in the US, at the present time, although Apple's flagship store on 5th Ave, in New York City, gets supplies from time-to-time. However, no GSM US model iPhone 5 will support LTE anywhere other than North America. It will not support LTE in Europe. If you want LTE support in Europe, you need to purchase your phone in Europe.
-
If I travel outside the US with an unlocked iphone and use a local SIM will I still receive iMessages sent to my US number when wifi is activated?
Ok, one of my problems is that when I arrive it will take me a few weeks to get a social security number and only t-mobile will give me a sim without a ssn - but edge for a few weeks will be better than no iPhone.
Unless someone out there can suggest an alternative? -
I lost my mini iPad in Peru, Machu Pichu area and I do not know how to use the find my iPad ... can you help???? please, before the person that found it unblock and use it
Did you enable the "Find my..." function BEFORE you lost it?
-
Can I buy a 4s in the U.S. without a contract and use it in another country?
Can I buy a 4s in the U.S. without a contract and use it in another country? I want to buy it in the U.S. but use it in Spain (probably with Orange)
As long as you buy an iPhone that is unlocked (aka "SIM free") not just without contract. Unlocked iPhones are available only from Apple Stores in the US.
Note that the warranty on the iPhone is not international, so if you have a problem with a US iPhone, you would have to ship it to someone who could take or send it to Apple for service and then ship it back to you.
Regards. -
Physical query issued by Obiee when cache is on is different and slow
When the same report runs in OBIEE 10g and cache is OFF it takes less then 1min to get results. If cache is turned ON physical query issued by Obiee is totally different and it takes 2h to get results. Has anyone experienced this with having cache on that some queries are performing poorly.
Thanks,
TatjanaWe are using BI Apps Order Management and Fulfillment Analytics and all tables are cached anyway. Dimensions used are not that huge up to 40K rows. What should I check when it comes to DB query? As I said is different than one generated when cache is disabled although both have the almost the explain plan.
-
Issue while archiving the processed file in sender communication channel using SFTP adapter
Hi All,
In one of my scenario (File to IDOC), we are using SFTP sender communicationchannel.
we are facing an issue while archiving the processed file. Some times PI processed the file successfully but unable to archive it and in the next poll PI process & archives the same file successfully which will creates duplicate orders in ECC.
Please let us know how to resolve this issue.Hi Anil,
Refer Archiving concepts in below links.
http://help.sap.com/saphelp_nw73/helpdata/en/44/682bcd7f2a6d12e10000000a1553f6/content.htm?frameset=/en/44/6830e67f2a6d12e10000000a1553f6/frameset.htm
http://scn.sap.com/docs/DOC-35572
Warm Regards,
DNK Siddhardha. -
I have an iphone 4s. A while ago it started having issues with bluetooth. All of the sudden, an audio headset I am using quits working with my iphone bluetooth. I check and my iphone doesn't see any of my bluetooth devices. I have an apple keyboard, a headset, and a speaker. Nothing shows up on my iphone but they all connect perfectly to my ipad. Then a day or so later it works again. The are all suddenly there. I just installed iOS7 and I'm still having the same problem. What is UP? Anyone have a clue what is going on?
I have this problem too. I have an iPhone 4, and this wasn't a problem when I bought the phone back in December. I think it came a month or so later and I suspect with a standard upgrade of something like itunes, or iphone software... but I can't pinpoint it to any specific update as it took me a while to notice it. For me, it does this with my work calendar which is run through Microsoft Outlook. But it's the exact same thing - and it means my calendar isn't reliable anymore.
I've made sure the time-zone settings are correct, I've updated all software, and gone through all possible settings for both my i-phone and Outlook. Nothing fixes the problem, even our tech guy at work didn't know what to do. I know it's not just my phone as the exact same thing has happened with my boss's iPhone which is an iPhone 3G, and it frustrates him to no end.
I'm really hoping someone at apple can tell us what's going on, especially since it never used to do this and there doesn't seem to be any way to fix it. If someone thinks they know what itunes update this was due to, let me know - I'll see if I can go back to that older version. -
Whats the difference between a combo update and using software update?
I keep my Macbook up to date by checking regularly via software update, so far with no mishaps, but I have seen people on these forums mentioning that a it is better to download the combo updates direct from Apples website. Is this true, if so why, and what is the difference? I am thinking of installing Leopard which would then probably need updating to the current version, so what is the correct way of doing this?
There are no guarantees, but following this procedure when installing updates and upgrades on your Mac, or even re-installing them, will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
The 10.4.11 Combo Updater for PPC Macs is here: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eppc.html
And for Intel Macs: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eintel.html
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
More information on using Software Updater here:
http://support.apple.com/kb/HT1338
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later). -
This morning I was just getting the white screen with logo and status bar with fan running. I thought it was an issue with the power adapter so I went out and replaced it. MBP will start now, but won't connect to internet. I have full wi-fi signal. Also, when I try to launch iTunes, it just quits right away. Please help?
-AReinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
The Iphone will not get out of recoverymode
Google is your friend.
http://support.apple.com/kb/ts3694#error3004
Network connection or download errors
Error 1479: This error occurs when trying to contact Apple for an update or restore.
Quit iTunes
Disconnect from USB and restart the iOS device.
Reconnect the device to the computer.
Launch iTunes and attempt to update or restore again.
Error 1639: Follow these steps.Errors 3000-3999 (3004, 3013, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes can't contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software isn't interfering with ports 80 or 443 or with the server gs.apple.com.
Follow these steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (go to "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you're using a proxy, try again without using a proxy.
Test restoring while connected to a known-good network.
Error 3002: If you experience this error while updating an iPod touch (2nd generation) or iPhone 3G, please use the standard update or restore process in iTunes (click Update or Restore).Error 3194: You may not have the latest version of iTunes installed. Update to the latest version of iTunes. If the issue persists, follow the steps above in "Unable to contact the iOS software update server gs.apple.com."Error 3004: If you're using a Mac, you may be able to resolve an error 3004 by quitting iTunes and using the following command in the command line: dscacheutil -flushcache.The device couldn't be restored. An internal error occurred or Error 3200: This indicates a network-connectivity or traffic issue. If you see this error, wait an hour or more and try again.Error 9807: Verify the computer's date and time.If unresolved, open access to the following VeriSign servers:
evintl-ocsp.verisign.com
evsecure-ocsp.verisign.com
Access to these servers may be blocked by security software, content filtering software, a misconfigured router, or anti-spyware software. For iTunes for Windows, follow these steps to troubleshoot security software issues.
Error 9808 (or -9808): Follow the steps for an unknown alert message when connecting to resolve the issue. If those steps don't resolve the issue, or if the settings revert to their original values after the restart, then follow the steps to troubleshoot security software issues.
Error 9844: This is typically caused by incorrect firewall settings. Go to "Open the proper ports and allow access to Apple servers" in the "Advanced steps" section below.
Maybe you are looking for
-
hello forum, Here is quite a newbe question I suppose.. Is there a fairly easy method to change the content of the iViews on the HOME page in the portal? We wish only to change the text in the 'SAP Enterprise Portal' iView (com.sap.portal.welcome.iVi
-
hi all On clicking the approval button (Purchase requisition )..submitted successfully but the status remains Incomplete . does anybody has an idea of this.
-
i am trying to implement a smart tabbing feature: when the user hits enter the smartTab function is called. textPane is a JTextPane. private void smartTab() { System.out.println("smartTab()"); //finds the last l
-
White screen on messages help!
I recently went on iMessage and spammed someone with lots of emoticons, not the smartest thing to do, Messages crashed out, and now both on my iPad and iPhone messages wont work. Help?
-
Lightroom corrupting RAW files? Hardware issue?
I've started having some issues with RAW files being corrupted when I open them in Lightroom. I've done a lot to troubleshoot and narrow down the symptoms, and here is what I can tell you. If anyone has any ideas for how to solve this, I'd really app