Matrix with group

Hi all,
I need to create a matrix which is as it is like that MRP result grid.
here i need to show 3 columns of my table as columns and another 4 columns as rows like group by or sort by
plz help me how to create this matrix
plz its very importent to me

Hi,
To my knowledge, am quite sure that we can't get the functionality of the MRP Result screen in a single matrix using our SDK. Rather, what I meant was, you need to have two matrix side by side and that obviously can give you at least 70% of a look and feel as that of the MRP Result screen. Further, while loading that particular form, say by a wizard, or directly from the menu, you need to correspondingly load the values in the 2nd Matrix / Grid w.r.t the values in the 1st Matrix.
Thru this, you can achieve the basic functionality. Taking it further with the cosmetic changes in the UI, you need to play around with the UI part and make sure you at least achieve something close to the default looks.
Hope it helps.
Regards,
Satish.

Similar Messages

How to create Matrix with Group report layout in xml

Hi,
i would be glad if anyone could tell me How to create Matrix with Group report layout in xml?
Here i am attaching the required design doc
below is the code
select COST_CMPNTCLS_CODE,
-- crd.RESOURCES,
NOMINAL_COST,
cmm.COST_MTHD_CODE,
-- crd.COST_TYPE_ID,
gps.period_code
-- ORGANIZATION_ID
from CM_RSRC_DTL crd,
gmf_period_statuses gps,
CM_MTHD_MST cmm,
CR_RSRC_MST crm,
CM_CMPT_MST ccm
where gps.period_id = crd.PERIOD_ID
and crd.cost_type_id = cmm.cost_type_id
and crd.RESOURCES = crm.RESOURCES
and crm.COST_CMPNTCLS_ID = ccm.COST_CMPNTCLS_ID
and gps.period_code in (:p_period1, :p_period2, :p_period3)
group by COST_CMPNTCLS_CODE, cmm.COST_MTHD_CODE, gps.period_code,NOMINAL_COST
order by 1,2,3,4.
The o/p of the report shoud be as given below
          Period-1     Period-2     Period-3     Period-4
COMPONENT
LABOUR - DIRECT
     Actual     1     2     3     4
     Actual Rate     10     10     10     10
     Standard Rate
     Var%
DEPRICIATION-DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
OVERHEAD - DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
LABOUR - IN DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
Thanks in advance

Your friend is obviously not a reliable source of HTML
information.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr.Ghost" <[email protected]> wrote in
message
news:f060vi$npp$[email protected]..
> One of my friends advised me to develop my whole site on
the layout mode
> as its
> better than the standard as he says
> but I couldnot make an ordinary table with rows and
columns in th layout
> mode
> is there any one who can tell me how to?
> thanx alot
>

How to build a Matrix with Group Left Report

I want to build a Matrix with Group Left Report,not Matrix with Group Above Report,i am still finding the solution, any help is useful.
thanks
<[email protected]>

Hi,
The problem in your output is not clear. The report output should appear like:
Order Mode.....Sales_Rep_ID > 10..11..12..
Online.........Order Status
...............A..............x....x...x
...............B..............x....x...x
...............C..............x....x...x
Order Mode.....Sales_Rep_ID > 10..11..12..
Retail.........Order Status
...............A..............x....x...x
...............B..............x....x...x
...............C..............x....x...x
Here "Order Mode" is the group field (it repeats for every group). Could you pl specify what output you are getting?
If the problem is that you don't want the Title (like "Order Mode" in the above example) to print in every group, just place it outside the group repeating frame. It will print only once.
Navneet.

NEED HELP IN MATRIX WITH GROUP REPORT

Dear All,
I need small help in MATRIX WITH GROUP REPORT In Report Builder Test Report
In my report, having periods as rows and location as columns as shown below,
1) LOC-A
JAN-10 FEB-10
ITEM-GROUP -1 1 2
ITEM-GROUP-2 3 4
ITEM-GROUP 3 5 6
2) LOC- B
MAR-10 APR-10
ITEM-GROUP -1 7 8
ITEM-GROUP-2 9 10
ITEM-GROUP-3 11 12
But comming to my requirement, the periods should be in fix in matrix as shown below
1) JAN-10 FEB-10 MAR-10 APR-10
LOC-A
ITEM-GROUP -1 1 2
ITEM-GROUP-2 3 4
ITEM-GROUP 3 5 6
LOC- B
ITEM-GROUP -1 0 0 7 8
ITEM-GROUP-2 0 0 9 10
ITEM-GROUP-3 0 0 11 12
I am unable to get this kind of output format
Please kindly waiting for reply from our team....
Regards
krishna.P

For the periods, create a seperate dummy query and then use it as column group in the multi query matrix.

Borders in Matrix with Group Report Missing in Web view

Please help.
I have a matrix with group report. When it is viewed in Report Builder live preview is fine, but when I preview in web I got two problem
Problem 1 - preview as HTML
No borders? all my cell borders, frame borders gone missing.
Problem 2 - preview as HTML CSS
The borders are there, but some data in the matrix report displayed wrongly.
For example, the data is "01 APR 2000 1800 - 20 APR 2000 2000", what is showing in the web view is actually
"01"
"APR"
2000
1800
i.e., is broken down into few lines.
Can anyone please help. Btw I am using Oracle Report 6i.
Thanks.
Joshua

For Simple HTML output, you can only get horizontal lines out of Reports. You will lose all vertical lines as well as other graphical objects (eg: polygons, polylines, etc.) This is because these objects are not supported natively within HTML.
However, for HTMLCSS, you should be able to get a lot closer since rectangles are supported. Though again; polygons, polylines, etc. are not supported.
Not sure what is happening to your text, possibly an issue with browser settings or you may need to reduce the font size in Reports to get what you want.
As has already been suggested, for better WYSIWYG output for the web from Reports, PDF is the way to go.

More than one summary level for a matrix with group

Hello friends at www.oracle.com ,
I have a report where I need to create a summary level for each row and column. In the Report wizard, it works finely, creating the summary for the 1st matrix group level.
However, if I have some extra matrix group levels - that is, a 2nd or a 3rd level -, it seems that Reports doesn't create its summary levels.
How can I create other summary levels at the matrix, outside the inner matrix?
Best regards,
Franklin Goncalves Jr.

Hello petpandian,
I have a little example that intends to demonstrate what I really need. Hope it is clear enough.
(Below you can see the output I am looking for)
..................MONTH/YEAR
CITY REGION 04/2005.....05/2005
AA.....BB......$ 10,00.....$ 15,00
...............$ 11,00.....$ 16,00
Totals for BB: $ 21,00.....$ 31,00
..................MONTH/YEAR
CITY REGION 04/2005.....05/2005
AA.....CC......$ 30,00.....$ 11,00
...............$ 40,00.....$ 15,00
Totals for CC: $ 70,00.....$ 26,00
Totals for AA: $ 91,00.....$ 57,00 <-- Totals separated for each region and month/year.
As you can see, I need a matrix with group(s) around it. 1st group level is the city (AA), and I have its regions BB and CC. After showing BB values, I have BB totals for each month/year. Same applies to CC totals.
However, I expect that these results can be showed for its outside group (in this example, CITY AA), and what I have in return is the sum of all values in a single field:
Totals for CC: $ 70,00.....$ 26,00
Totals for AA:.....................$148,00 <--- The sum of all totals: it's not separated as above.
I think I should have a matrix inside a matrix, so I would have totals for each region, and totals for each city, separating by its regions and month/year.
The only solution I found was to calculate it manually via PL/SQL and inserting it into a temporary table. However, I think it is not the ideal solution because PL/SQL instructions have to handle the totals, something that Reports should do, and that's why I need help.
Your help will be greatly appreciated. Thanks in advance.
Best regards,
Franklin Goncalves Jr.

Matrix with Group Style

Hi:
I need to combine two complex queries to form a report. I was able to create Matrix with Groups style for the first query, but I could not create the second one with the same style.
Is it possible for creating a second query with a Matrix with Groups Style by using Additional Default Layout in the Layout Model?
Thanks in advance for any help.
Tracy
null

hello,
the report wizard only supports the creation of one layout. however by using the report block wizard (additional default layout) you can add another layout to your report. but be aware that this wizard assumes you already have the datamodel for it. if not you have to invoke the datawizard first and then invoke the report-block wizard.
regards,
the oracle reports team

Reports 6i Requirement -- Complext Matrix with grouping. Urgent help needed

Hi All
I have a report requirement. The problem is like this.
There is an organization under which there are several schools.
each school has different classes.
Each class has several no of students.
We have to display marks of all the students in each class of the organization (note. all classes, schools)
============================================================================================
Organization
School1
Class1 subject 1 subject2 subject3 Totals
stud1 30 50 70 150
stud2 40 70 90 200
total for class 70 120 160 350
Class2
stud11 50 60 80 190
stud12 70 80 90 240
total for class 120 140 170 430
total for school1 190 260 330 780
like wise for another school
Total for
organization 190 260 330 780
=============================================================================================
I have tried using the matrix report with groups. But i was able to create a matrix and find the totals upto the class level which is quite simple.
I was not able to find the totals subjectwise for the school and orgnization levels.
Can you suggest me any solution for this?
Please ignore some formatting. It is the best I could fit in this compose text.
but you should get the idea.
Is there any other way to display other than using the matrix?
I am using Oracle REPORTS 6i on Windows 2000. the database is ORacle 9i.
Thanks
Naveen

Much of it depends on the structure of the data/query. If the subject per student are stored or prepared so they appear as separte columns in a query then there would be no need to use matrix. Are you getting what I am saying?

Alligning Group labels to center in Matrix with Group report

Hi there!
I am facing difficulty in alligning the group labels produced using matrix(cross tab) query in to center across direction. As it only stretches to first column of the underlying Matrix Across Column and Cell. Please help me in solving this prob.
Thanks in advance.
Imran

For Simple HTML output, you can only get horizontal lines out of Reports. You will lose all vertical lines as well as other graphical objects (eg: polygons, polylines, etc.) This is because these objects are not supported natively within HTML.
However, for HTMLCSS, you should be able to get a lot closer since rectangles are supported. Though again; polygons, polylines, etc. are not supported.
Not sure what is happening to your text, possibly an issue with browser settings or you may need to reduce the font size in Reports to get what you want.
As has already been suggested, for better WYSIWYG output for the web from Reports, PDF is the way to go.

MATRIX WITH GROUP (REPORT TOTAL PROBLEM)

DEAR FRIENDS,
I HAVE A PROBLEM IN GROUP ABOVE MATRIX IN THE REPORT TOTAL.
THE SCENARIO IS THIS...
VEHICLE : CAR
----------------------- WEEK1 WEEK2 WEEK3 TOTAL
ESTEEM 10 30 40 80
ZEN 30 40 10 80
DELUX 40 30 10 80
SUB TOTAL 80 100 60 240
VEHICLE : VAN
----------------------- WEEK1 WEEK2 WEEK3 TOTAL
OMNI 10 30 40 80
OMNIDX 30 40 10 80
OMNILX 40 30 10 80
SUB TOTAL 80 100 60 240
GRAND TOTAL 160 200 120 480.
IN THIS VEHICLE IS THE GROUP AND WEEK1,WEEK2... IS MATRIX COLUMNS AND ZEN,ESTEEM IS MATRIX ROWS.
I AM UNABLE TO INCORPORATE THE GRAND TOTAL IN THIS TYPE OF REPORT. I AM USING 10G VERSION 9.0.4.
PLEAE TELL ME HOW TO DO THAT.
THANKS
VENKY.

If you got your subtotals to work than getting your grand total shouldn't be difficult at all. Your grand total column summaries should be one grouping above where your subtotal column summaries reside. I am guessing this will put them at the report level. Meaning they will not be in a group, just free floating in your data model. Good luck.

Matrix report with group.

dear all,
can anyone guide me how to build a matrix report with group using scott schema.
i can not be able to build a query.
Thanks
Muhammad Nadeem

The example given by Oracle (from the above link) using the following SQL for a matrix report is flawed.
SELECT DEPTNO, JOB, SUM(SAL)
FROM EMP
GROUP BY DEPTNO, JOB
ORDER BY DEPTNO, JOB
The SUM function handled by the query restricts you from doing so many things - especially when you want the empty fields to be filled by 0 (by using the Value if Null property).
If the query is changed to ''SELECT DEPTNO, JOB, SAL FROM EMP' , and use the SUM function in the wizard to build the Matrix cell, then the 'Value if Null' property can be used without any issues.
This also makes Section 25.6 (Add zeroes in place of blanks) of the documentation a joke.
Anyway, that's my cents worth....

Filling matrix with Dummy Data

I am doing a demo screen for a client and I need to fill a matrix with hard coded data. I followed the sample code and I have the following code but it is not working for me (it throws a matrix-line exists exception):
// Now get the matrix Item.
SAPbouiCOM.Item matrixItem = oForm.Items.Item("v33_Grid");
theMatrix = (SAPbouiCOM.Matrix) matrixItem.Specific;
Form.Freeze(true);
SAPbouiCOM.UserDataSource uds;
uds = oForm.DataSources.UserDataSources.Add("salesUds",SAPbouiCOM.BoDataType.dt_SHORT_TEXT, 10);
theMatrix.AddRow(1, theMatrix.RowCount);
SAPbouiCOM.Column     col      = null;
// Ready Matrix to populate data
theMatrix.AutoResizeColumns();
col = theMatrix.Columns.Item("desc1");
col.DataBind.SetBound(true, "", "salesUds");
uds.Value = "Test description";
// setting the user data source data
theMatrix.LoadFromDataSource();
oForm.Freeze(false);
oForm.Update();
I really need to get this working. ANyone got any ideas what I am doing wrong?

Hi Laura,
You should use theMatrix.SetLineData() which is the avaiable statement for user matrixes.
Here is some code that loads a form with a matrix from an XML. This way you can edit form values in the XML, instead of hard coding.
Dim oXMLDoc1 As Xml.XmlDocument = New Xml.XmlDocument
oXMLDoc1.Load("C:BaseForm.xml")
App.LoadBatchActions(oXMLDoc1.InnerXml)
Dim oForm As SAPbouiCOM.Form = App.Forms.GetForm("ITA0002", 1)
Dim oMatrix As SAPbouiCOM.Matrix = oForm.Items.Item("5").Specific()
Dim Informes As SAPbouiCOM.UserDataSource = oForm.DataSources.UserDataSources.Item("Informes")
Dim ID As SAPbouiCOM.UserDataSource = oForm.DataSources.UserDataSources.Item("ID")
Dim i As Int16 = 1
oMatrix.AddRow(ListaInformes.Length)
For Each Informe As String In NameList
   Informes.ValueEx = Informe
   ID.ValueEx = i.ToString
   oMatrix.SetLineData(i)
   i = i + 1
Next
The xml is this one:
<?xml version="1.0" encoding="UTF-16"?>
<Application>
     <forms>
          <action type="add">
               <form AutoManaged="1" BorderStyle="4" FormType="ITA0002" ObjectType="-1" SupportedModes="1" appformnumber="ITA0002" client_height="284" client_width="291" color="0" default_button="1" height="316" left="363" mode="1" pane="1" title="Informes" top="149" type="4" visible="1" width="297">
                    <datasources>
                         <userdatasources>
                              <action type="add">
                                   <datasource size="254" type="9" uid="Informes"></datasource>
                              </action>
                              <action type="add">
                                   <datasource size="10" type="9" uid="ID"></datasource>
                              </action>
                         </userdatasources>
                    </datasources>
                    <items>
                         <action type="add">
                              <item AffectsFormMode="1" backcolor="-1" description="" disp_desc="0" enabled="1" font_size="0" forecolor="0" from_pane="0" height="19" left="6" linkto="" right_just="1" supp_zeros="0" tab_order="10" text_style="0" to_pane="0" top="260" type="4" uid="1" visible="1" width="65">
                                   <AutoManagedAttribute></AutoManagedAttribute>
                                   <specific caption="OK"></specific>
                              </item>
                              <item AffectsFormMode="1" backcolor="-1" description="" disp_desc="0" enabled="1" font_size="0" forecolor="0" from_pane="0" height="19" left="77" linkto="" right_just="1" supp_zeros="0" tab_order="20" text_style="0" to_pane="0" top="260" type="4" uid="2" visible="1" width="65">
                                   <AutoManagedAttribute></AutoManagedAttribute>
                                   <specific caption="Cancelar"></specific>
                              </item>
                              <item AffectsFormMode="1" backcolor="-1" description="" disp_desc="0" enabled="1" font_size="0" forecolor="-1" from_pane="0" height="20" left="5" linkto="" right_just="0" supp_zeros="0" tab_order="0" text_style="0" to_pane="0" top="5" type="99" uid="3" visible="1" width="80">
                                   <AutoManagedAttribute></AutoManagedAttribute>
                                   <specific AffectsFormMode="1" caption="Informes" val_off="0" val_on="1">
                                        <databind alias="Informes" databound="1" table=""></databind>
                                   </specific>
                              </item>
                              <item AffectsFormMode="1" backcolor="-1" description="" disp_desc="0" enabled="1" font_size="0" forecolor="-1" from_pane="1" height="224" left="8" linkto="" right_just="0" supp_zeros="0" tab_order="60" text_style="0" to_pane="1" top="28" type="127" uid="5" visible="1" width="276">
                                   <AutoManagedAttribute></AutoManagedAttribute>
                                   <specific SelectionMode="2" layout="0" titleHeight="0">
                                        <columns>
                                             <action type="add">
                                                  <column AffectsFormMode="1" backcolor="-1" description="" disp_desc="0" editable="0" font_size="12" forecolor="-1" right_just="0" text_style="0" title="2" type="16" uid="2" val_off="N" val_on="Y" visible="1" width="20">
                                                       <databind alias="ID" databound="1" table=""></databind>
                                                       <ExtendedObject></ExtendedObject>
                                                  </column>
                                                  <column AffectsFormMode="1" backcolor="-1" description="" disp_desc="0" editable="0" font_size="12" forecolor="-1" right_just="0" text_style="0" title="Nombre" type="16" uid="1" val_off="" val_on="" visible="1" width="255">
                                                       <databind alias="Informes" databound="1" table=""></databind>
                                                       <ExtendedObject></ExtendedObject>
                                                  </column>
                                             </action>
                                        </columns>
                                   </specific>
                              </item>
                         </action>
                    </items>
                    <items>
                         <action type="group">
                              <item uid="3"></item>
                              <item uid="4"></item>
                         </action>
                    </items>
                    <FormMenu></FormMenu>
                    <DataBrowser></DataBrowser>
               </form>
          </action>
     </forms>
</Application>
Regards,
Ibai Peñ

Report with grouping issue

I have a report which have year(2008), Category(0-1,2-3, ALL), product(0,1,2,3,4..), % sales. I group by all the category elements and called it as All, I am not getting the right percentage sales for the Category ALL other wise for 0-1,2-3 i am getting it right. Please advise where i am doing it wrong. please find the blog for a screen shot of my issue.
http://ravibiblog.blogspot.com/2012/04/report-with-grouping-issue.html
Thanks,
RC

Pl post details of OS, database and EBS versions. Pl see if these MOS Docs can help
FARXPBSH Failing With "Program was terminated by signal 11" or "Program was terminated by signal 10"          (Doc ID 742729.1)
Publishing RXAPPYAC: The FARXPBSH Ends With 'Signal 11' Error          (Doc ID 432797.1)
RXi RX Reports Failing With Program Was Terminated By Signal 10 or 11 Errors After FA Rollup Patch 6          (Doc ID 737963.1)
Program was Terminated by Signal 11 when Running Rxi Reports          (Doc ID 559425.1)
HTH
Srini

Custom IKM Knowledge Modules are not working with Group By Clause

Hi All,
I am facing an issue with custom IKM knowledge modules. Those are IKM Sql Incremental Update and IKM Sql Control Append.
My Scenario is
1. Created an interface with table on source and temporary datastore with some columns in target.
2. In the Interface on the target i defined one column as UD1 and other column as UD2 for which group by to be implemented .
3. Customized IKM Sql Incremental Update with " Group by " by making modification in my IKM Sql Incremental Update
detail step "Insert flow into I$ table" i.e., i replaced like this whereever i find this <%=odiRef.getGrpBy()%> API
Group By
<%=snpRef.getColList("","[EXPRESSION]","","","UD1")%>,
<%=snpRef.getColList("","[EXPRESSION]","","","UD2")%>
Up to UD5.
. Here in the place of [EXPRESSION] i passed column names for UD1 similarly other column name for [EXPRESSION] of UD2.
4.Made all the proper mappings and also selected the KM's needed for that interface like CKM Sql ,IKM Sql Incremental Update.
5. Executed the Interface with global context.
Error i am getting in this case is :
Caused By: java.sql.SQLSyntaxErrorException: ORA-00979: not a GROUP BY expression
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1115)
Here the columns in the select clause are there in Group By also.
I did the same scenario using IKM Sql to file append .In that case i am able to do it. But not with the above mentioned KM's. Please let me know if any one know it or tried with this, as it is
high priority for me.
Please help me out.
Thanks,
keerthi

Hi Keerthi,
If your are transfering data from Oracle to Oracle (I means source is oracle Db and target is also oracle DB) then use below KM's and group by will come automatically based on the key values you selected on interface target datastore
1) CKM Oracle
2) LKM Oracle to Oracle (DBLINK)
3) IKM Oracle Incremental Update (MERGE)
Hope this will helps to resolve your issue
Regards,
Phanikanth

How to fill column value of a matrix with specific color when there is no value in that specific cell?

Hi All,
I need to create a 5/5 matrix in SSRS report. The data will be :
Col_Side   Col_Header   Col_data
1                  1                1
1                  1                 1
1                  2                1
1                  5                1
1                  5                1
1                  5                1
2                  3                1
2                  5                1
3                  1                2
3                  1                2
3                  1                2
4                   2               1
4                   4               1
5                   1               1
5                   1               1
5                   5               1
So, the matrix column will be Col_Header and matrix row will be Col_Side and count(Col_data) will be on the data.
Finally, it will create a 5 by 5 matrix with Count(Col_data) as its data for each combinations. If there is no combination (for ex: in the above data we do not have no combination of (1,3) , (1,4) , (2,1) etc..) then the matrix will be filling that corresponding
cell with zero.
Here I need to fill the cells with some colors based on some criteria.
I need to fill (5,3), (5,4), (5,5) combination with "Red" color. Like this , I need to give different colors in each of the cells. Here, (5,5) combination will be having 1 in its cell. (5,4) and (5,3) will be having zero in its corresponding
cells. I 'm trying to fill all the 3 cells with "Red" color. But, I am able to fill only (5,5) with "Red" color. Since the other 2 cells (5,3) and (5,4), has zero in their cells, it will not fill the cells with "Red" color.
How can I fill those two cells (5,3) and (5,4) with red color?
I know this is very vague. I have no option to give the picture here..
Please suggest

Hi Julie,
According to your description, there is a 5/5 matrix with three fields: Col_Side, Col_Header, Col_data. You drag Col_Side field to Rows, Col_Header to Columns and Col_data to Data, then filling blank cells with zero using expression. Now you want to fill
(5,3), (5,4), (5,5) cells with red color using expression, but it has no effect on cells (5,3) and (5,4).
According to my test, the expression has on effect on cells (5,3) and (5,4) since there is no corresponding data and the cells are blank. As a workaround, we can insert data for cells (5,3) and (5,4) in dataset, then use expression by following steps:
In the dataset, insert two sets of data (5,3,0), (5,4,0).
Right-click the cell of data, click Text Box Properties.
Click Fill in left pane, click (fx) button, then type the expression like below, then click OK.
=iif(Fields!Col_Side.Value=5 and Fields!Col_Header.Value >=3 ,"red","white" )
The following screenshot is for your reference:
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu

Matrix with group

Similar Messages

Maybe you are looking for