Release strategy does not reset after PO change - tried changeability 4 & 6

Hi,
After my PO is released, I change the item quantity/price such that the net PO value (increased) is changed MORE than the tolerance % set in the changeability. I expect that the PO release should be reset but it does not.
However if my PO value is changed (increase) such that my PO value is now in a different "release bracket/range" -- as it falls into a different release strategy, then the release is reset.
Could anyone advise me what is wrong? I tried everything - i tried changeability = 4 and 6. i deleted the whole release class, release strategies and recreated -- nothing.
According to OSS note 493900 below, it should reset when the tolerance % is breached.
I'm on SAP 4.7.
Anyone could advise?
thanks!
     3. Question :
     Why is the release strategy not reset ?
     Answer :
     A reset of the release strategy only takes place if
            - the changeability of the release indicator is set to '4' in
               case of a purchase requisition and '4' or '6' in case of
               another purchasing document (purchase order, request for
               quotation, contract, scheduling agreement),
            - the document is still subject to the previous release
               strategy,
            - the new TOTAL NET ORDER VALUE is higher than the old one.
     The total net order value is linked to CEKKO-GNETW for a purchase order,
     CEBAN-GSWRT for a purchase requisition item-wise release and CEBAN-GFWRT
     for a purchase requisition overall release.
     If you have maintained a Tolerance for value changes during release
     (V_161S-TLFAE), the release strategy is reset when the value of the
     document is higher than the percentage you have specified and if the
     document is still subject to the previous release strategy.

Hi,
Thanks.
The release strategies are able to be determined correctly when the PO is created so I guess that means its all setup correctly?
The issue is only with PO change - how to cause the reset when the PO value increases by more than the tolerance %.
cheers.

Similar Messages

Release Strategy to be reset for any change in purchase order

Hi Experts,
At present the release strategy configured is for any change in the value of the purchase order, the release strategy is reset. Now the the client wants that for even any text change of a word, text, quantity, value, addition, deletion the release strategy should be reset.
Can any one guide to configure the release strategy for any change. Also please provide the list of standard parameters/scenario (E.g. change of price, change of quantity etc) for which the release strategy can be configured to be reset.
Thanks in advance.
AJ

Hi Diwakar,
I too have the same problem. I tried with Changeable indicator "1". The system does not allow to make any change to the Purchase Order even after the first level of Release. But the requirement is that the system should Reset the Release Strategy for even minor Change in the PO.
Regards,
S.Raghavan

Running Total does not reset when group changes

I have a manual running total for group3 that does not reset for group2
Group2 Header (Order Status 3=Open,4=Closed)
WhilePrintingRecords;
currencyVar WIP=0;
Group3 footer (Order Number)
WhilePrintingRecords;
currencyVar WIP;
WIP := WIP + {@NETWIP}
Group2 footer
WhilePrintingRecords;
currencyVar WIP;
There are no Repeat Group header on any of the groups
Will add Group1 total when this part works.

I am not sure if you made a typo when making your post but you are missing a colon when resetting your variable
change from this
currencyVar WIP=0;
to this
currencyVar WIP:=0;

Chart does not update after table changes

Simple X-Y chart using a data series from a table. The chart will not update after changing the table, for example after applying a filter. The chart will update if you close and reopen the file or go to Select Data on the chart. I use named ranges
because you can't use table nomenclature directly in the chart series definition.

Seems to update for me OK. You need to apply the entire unfiltered range to the chart before filtering. Did you do this or filter first and only apply the visible range?
If not the answer to you query then maybe I am not understanding the problem correctly so can you upload an example workbook?
Guidelines to post a workbook on OneDrive
Zip your workbooks. I prefer that you do not just save to OneDrive. (To Zip a file, in Windows Explorer Right click on the selected file and select Send to -> Compressed (zipped) folder.)
Go to this link. https://onedrive.live.com
Use the same login Id and Password that you use for this forum.
Select Upload in the blue bar across the top and browse to the zipped folder to be uploaded and select Open (or just double click). (Be patient and give it time to display the file after initially seeing the popup indicating it is done.)
Right click the file on OneDrive and select Share.
Do NOT fill in the form; "Select Get a Link" on the left side.
Click the button "Create a Link"
Click in the box where the link is created and it will highlight.
Copy the link and paste into your reply on this forum.
Regards, OssieMac

Re-set release strategy of rejected PO,after doing respective changes to po

Hi friends,
I have created release strategy for Purchase order with release indicator 6 (Changeable, new rel. if new strat. or value change/outputted), and with 3 release codes (3 approvers)..
Now in this case, After Rejection of a approver (creator of po will get an mail telling that its rejected). After rejection, the creator has did required changes and save the PO.
However the release strategy is not reset...So i want to know how to reset the release strategy in this case..
Where as in case after the approval, if creator do any changes in purchase order then release strategy is resets...
Here PO printout is possible only after the final approval...
Pls give some inputs in fixing this issue..
Thanks in advance....
Regards
Shashidhar...

Hi
What are the characteristics of your strategy?
Try to change one of them save and then rechange it to the original
eg.
If the strategy depends for example on the Purchasing Group (PG)
i mean according to different PG's different strategies working
then with ME22N change the PG save and rechange it again to the original.
or
for example If the strategy depends on Materail Groups (MG)
then do the change with MG
With ME22N change the MG save and rechange it again to the original.
I guess this will trigger the strategy again.
Hope it helps
Best Regards

In Security, clicking on the "Saved Password" button displays your current saved password for each site. It does not allow you to change a password. How would you do that?

In Security, clicking on the "Saved Password" button displays your current saved password for each site. It only allows you to view and delete site passwords. It does not allow you to change a password. How would you do that?

If you enter a new password Firefox should offer to change the password.
*You may not need to delete the old password. Try "Refreshing" the page, entering the site again, you may need to let Firefox fill in the old password, then enter the new password, and Firefox should ask to save the new password. See:
**http://kb.mozillazine.org/Deleting_autocomplete_entries
*If you delete the old password, you may need to "Refresh" the site after deleting the old password.
If you want to delete the password that has been saved do the following:
#In the Tools menu select Options to open the options window
#Go to the Security panel
#Click the "Saved Passwords" button to open the passwords manager
#Select the site in the list, then click Remove
 
 
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe PDF Plug-In For Firefox and Netscape 8.3.0 (''Note: this is a very old version and installing the current version may not delete it or overwrite it. To avoid possible problems with having 2 versions installed on your system, you may want to remove the old version in Windows Control Panel > Add or Remove Programs before installing the new version'').
*Shockwave Flash 10.3 r181 (''this may be current but a new version was released on 2011-06-14 with a ".26" after the "181". You can use the Plugin Check below and/or look in Add-ons > Plugins for the version of Shockwave Flash that you have installed. The newest version will be shown in Add-ons > Plugins as "Shockwave Flash 10.3.181.26"'').
*Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml

Release strategy of contract disappeared after using of MEMASSCONTRACT

Hi All,
May be some one can help me?
I have next problem it tr. MEMASSCONTRACT(ECC6)
Release strategy of contract disappeared after using of tr. MEMASSCONTRACT. I know why it happened, but I don't know how to correct it. Some time ago IN ECC5 we added a field to a table EKKO and used this field as one of characteristics in the release strategy of contracts. In order to transfer value of this field to field CEKKO-USRC1 we used User Exit EXIT_SAPLEBND_002. This User Exit is suitable only for online transactions (ME31K, ME32K). How can I feel field CEKKO-USRC1 in transaction MEMASSCONTRACT?
Regards, Liza

Thank you. Probably I didn't explain my problem clearly. It's section of code from User Exit EXIT_SAPLEBND_002:
ATA: reference(20) TYPE c VALUE '(SAPMM06E)EKKO'.
DATA: it_ekko TYPE ekko.
FIELD-SYMBOLS: <ymm_icl> TYPE ANY.
e_cekko = i_cekko.
*THE "ICL Contract" FIELD IS ONLY RELEVENT IN THESE TRANSACTIONS
IF sy-tcode EQ 'ME31K' OR sy-tcode EQ 'ME32K'
OR sy-tcode EQ 'ME33K' .
ASSIGN (reference) TO <ymm_icl>.
it_ekko = <ymm_icl>.
e_cekko-usrc1 = it_ekko-ymm_icl.
ENDIF.
Program SAPMM06E can only be reffered while using online transactions. Mass transactions does not use these program and it is completely class based. So, may be someone know how can i do the same , but for tr. MASS in ECC6.

New release strategy should not trgger for PO released with old Rel Strategy

Hi All,
Please suggest. Po has been fully released with Release Strtgy V1 XX. Now I m replacing release strategy XX with ZZ. If I change any po which has old rel str XX , system will reset new release strategy as in config changeability indicator 4 maintained.
But requirement is if there is any change or value decreasing in fully released Pos with old strategy it should not retrigger new release strategy. If value Increases then New strategy should retrigger.
Please help me on this.
regards,
Rohit

HI Rohit
A reset of the release strategy only takes place if
       - the changeability of the release indicator is set to '4' in
          case of a purchase requisition and '4' or '6' in case of
          another purchasing document (purchase order, request for
          quotation, contract, scheduling agreement),
       - the document is still subject to the previous release
          strategy,
       - the new TOTAL NET ORDER VALUE is higher than the old one.
The most important thing to consider in to avoid changes to release strategy customizing once the release strategy is used.
The commom steps are:
1- make sure all of the old POs should have been released.
2- don't delete/change the original release strategy. create a new release strategy with copy function, then the old release strategy will not be replaced.
3- if you delete the original release strategy and add a new release strategy which the characteristics in classification is same as old release strategy then the PO (have been approved) will be replaced with the new release strategy.
Kind regards,
Lorraine

PO release strategy is not triggering if Quantity pre.Qty

Standard SAP design will trigger the 'PO release strategy' if Total net order value (GNETW) is more than set. Lets take if PO created with Qty 100 and Price 50 then first time 'PO release strategy' is triggering when you save the PO. Next time when you change Qty less than the previous value like 80 from 100 then 'PO release strategy' is not triggering but if you enter more than previous value as 120 then its triggering. Ofcourse it makes sense but our user wants to trigger if any changes happened to QTY or PRICE. Is there anyway to trigger?
Found user exit - EXIT_SAPLEBND_002 but not sure what needs to be changed. Can one let me know the solution, if you have any.

Hi.
According to note 493900, question 4, release strategy is reset only
for some specific case. Alternatively, please question 5 from this note
release strategy might be redetermined. However in order to determine a
new release strategy the field that is changed in PO must be included
as one of the fields in the strategy. Thus there is no standard way
for resetting/redermining release strategy for a change of e.g. text
on header or item level.
Please also kindly refer to other 2 useful notes for this area:
662993 Resetting an already occurred release
365604 FAQ: Release strategies in purchasing
BR
Nadia Orlandi

RAC does not start after trying to move storage

Hello,
We have a two nodes RAC Oracle 10g and ASM groups defined on one external storage.
RAC does not start after we reformated the storage to RAID 10.
What we did:
1) deleted the database
2) reformated the external storage to RAID 10 and defined needed volumes for OCR, VotingDisk and ASM
3) on both nodes
- recreated VotingDisk
node1:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
node2:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
- tried to move OCR but was able only on one node:
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocrmirror /dev/rdsk/c7t30d0s3
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr /dev/rdsk/c7t29d0s3
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr
These return ok for both node1 and node2:
node1:oracle$ cluvfy stage -post hwos -n node1
node1:oracle$ cluvfy stage -post crsinst -n node1,node2 -verbose
Performing post-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "node1"
Destination Node                      Reachable?
node1                                 yes
node2                                 yes
Result: Node reachability check passed from node "node1".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name                             Comment
node2                                 passed
node1                                 passed
Result: User equivalence check passed for user "oracle".
Checking Cluster manager integrity...
Checking CSS daemon...
Node Name                             Status
node2                                 not running
node1                                 not running
Result: Daemon status check failed for "CSS daemon".
Cluster manager integrity check failed.
Checking cluster integrity...
Cluster is divided into 2 partitions.
Partition 1 consists of the following members:
Node Name
node1
Partition 2 consists of the following members:
Node Name
node1
node2
Cluster integrity check failed. Cluster is divided into 2 partition(s).
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
WARNING:
CSS is probably working with a non-clustered, local-only configuration on nodes:
node1
Verification will proceed with nodes:
node2
Uniqueness check for OCR device passed.
Checking the version of OCR...
OCR of correct Version "2" exists.
Checking data integrity of OCR...
Data integrity check for OCR passed.
OCR integrity check failed.
Checking CRS integrity...
Checking daemon liveness...
Check: Liveness for "CRS daemon"
Node Name                             Running
node2                                 no
node1                                 yes
Result: Liveness check failed for "CRS daemon".
Checking daemon liveness...
Check: Liveness for "CSS daemon"
Node Name                             Running
node2                                 no
node1                                 no
Result: Liveness check failed for "CSS daemon".
Checking daemon liveness...
Check: Liveness for "EVM daemon"
Node Name                             Running
node2                                 no
node1                                 yes
Result: Liveness check failed for "EVM daemon".
Liveness of all the daemons
Node Name     CRS daemon                CSS daemon                EVM daemon
node2         no                        no                        no
node1         yes                       no                        yes
Checking CRS health...
Check: Health of CRS
Node Name                             CRS OK?
node1                                 unknown
Result: CRS health check failed.
CRS integrity check failed.
Post-check for cluster services setup was unsuccessful on all the nodes.
Please help.

Thanks for the answer.
Problem is that the RAC is not healty, I know how to start it but now it doesn't start and I cannot find helpful logs.
You can see that cluster is not healty from cluvfy output.
When I tried to start crs whith crsctl start crs but:
- on node2 none of the demons starts (CSS, CRS or EVM)
- on node1 CSS and EVM demons start but CRS is not starting and I cannot find helpful logs
Problem 2: Cannot change OCR location
node2:root$ cat /var/opt/oracle/ocr.loc
+#Device/file /dev/rdsk/c7t30d0s3 getting replaced by device /dev/rdsk/c7t30d0s3+
ocrconfig_loc=/dev/rdsk/c7t30d0s3
local_only=falsenode2:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
PROT-1: Failed to initialize ocrconfig
node1:root$ cat /var/opt/oracle/ocr.loc
ocrconfig_loc=/u01/oracle/product/10gr2/db/cdata/localhost/local.ocr
local_only=TRUE
node1:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
PROT-1: Failed to initialize ocrconfig
Problem 3: On node 1 I wrongly issued a command
node1:root$ /u01/oracle/product/10gr2/db/bin/localconfig reset
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Configuration for local CSS has been initialized
Adding to inittab
Startup will be queued to init within 30 seconds.
Checking the status of new Oracle init process...
Expecting the CRS daemons to be up within 600 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
Oracle CSS service would not start as installed
Automatic Storage Management(ASM) cannot be used until Oracle CSS service is started

16 GB x-Fi Style - does not start after charging

Hi,
4 weeks ago I bought my x-Fi style and used it during my holidays for 2 weeks. After charging the player only twice (USB-connection with notebook), it now fails starting. Maybe there is an internal temperature fuse to protect from overheating and I only have to wait to try again? After connecting to USB the CREATIVE sign appears but disappears directly and a battery symbol appears and remains on the screen. After disconnecting the player does not react in any way. I already tried to reset but cannot start it again.
Can anyone help me?
Cheers,
Uli

Re: 6 GB x-Fi Style - does not start after charging:Just fyi
I found the website for Creative to be very frustrating. Not one snail mail address or corporate headquarters info. The link for website feedback didn't work and one other customer service link was a dud. They clearly don't want to be 'bothered' with complaints, or anything positi've for that matter!
But, I searched on the forum and found a three-year-old post about someone who was frustrated with having to carry around a paperclip to always push 'reset' on his X-Fi -- and the light dawned! Didn't know I had one of those. I pressed reset and voila! it is working again. Still had to charge it, but it accepted the charge this time and I was able to finish my book and move on to the next. Now, the next problem is I tried to access my wireless network which has a $ in the password and there is no $ in the choices for entering a password. So, now I have to change the password, change all of my device passwords (Blu-Ray, iPad, laptops(2), friend's laptops, etc. a huge pain. Seems to me they could have included a $ in the choices!

Service entry sheet release flag is not appearing in the change mode.

Hi,
In Service entry sheet release flag is not appearing in the change mode(ML81N). though release strategy is exsists in the header level.
note:
1.No changes done release setting, classes, or any other parameter.
2.Last day Few service entry sheets have been released by user .
3.And also i tried with different user , whereas he is geeting release flag, but concern user is not getting?
wht could be reasons?
Please provide suitable solution.
regards,
kumar.

Issue here is user is having authorization issue. Please run ML81N and execute /NSU53 report.
Also execute ML81n and then /NSU53 report for the other user whos does not have this problem. Then send both the reports to Security team asking them to add the missing object in the user's role who has the problem.
Hope this helps.
Ganesh

Access DB (& .ldb file) does not close after crystal reports

Post Author: mgold
CA Forum: Crystal Reports
Access DB (& .ldb file) does not close after crystal reports
Hi! We have a VB application using Crystal Reports 6 that has worked successfully on hundreds of systems for over 10 years. Now, on one network, the application and access database does not close. It seems to hang on the [.Close] command.
When we open the application an peruse the screens without opening up a report (using crystal reports), the application and access db closes fine. But as soon as we run a report and then close the report and try to close the application, the access db does not close. Many of the screens open the db and grab data from the access db, but it's only after running crystal reports that we have this problem. (Please see more information below.)
Setup: Application and data (access 97 db) reside on a server in the same folder, but application shortcut is kicked off on client PC. Kicking off the shortcut on the client PC means that the image/process runs on the client PC (not on the server). In this problem case, the application shortcut is on a Windows XP Pro Version 2002 SP2 PC with the app & data on a Windows 2003 server. Users are local Admins on their PCs with "Full Control"over the directory and files on the server where the data (access 97 db) resides. This type of setup is typical and has worked without any problems for clients.
The application is written in Visual Basic, using Crystal Reports 6 (using DAO). We close the recordset, set it to zero and then it hangs on closing the db (.Close command).
A few key pieces of information:
- The application closes fine if the app & data (access 97 db) are on a local PC. This includes closing fine if the application is run directly on the Windows 2003 server where the data is stored.
- It worked on this client's network until sometime in the last few weeks.
- One thing that changed is that the company is using VMWare on its servers. Not sure if they started using VMWare at the same time as it started failing. This may be unrelated. Possibly other things changed, but can't get any more information ... yet.
- It works fine running the application from a Windows Vista PC with a user who is a domain admin.
- The access db and application hang for about 10-20 minutes and then eventually closes. It appears that somehow
Crystal Reports is keeping the db open, but I'm not sure why.The application doesn't quit and the database doesn't close even if I try to end the task with the Task Manager.
- The Crystl32.ocx version being used is 8.0.0.4 (if that matters).
- I copied 6 month old program files and database files to a test folder on the Windows 2003 server. It fails using these files that worked fine 6 months ago.
Any ideas or help would be greatly appreciated! If you know of another good place to post this, please let me know.
Thanks!
- Mark

Crystal doesn't support tables in HTML interpretation.
You can probably work your way around this by doing Replace() calls on the relevant tags.
See:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313337333033383334%7D.do
The supported HTML tags are:
" html
" body
" div (causes a paragraph break)
" tr (causes only a paragraph break; does not
preserve column structure of a table)
" span
" font
" p (causes a paragraph break)
" br (causes a paragraph break)
" h1 (causes a paragraph break, makes the font bold
& twice default size)
" h2 (causes a paragraph break, makes the font bold
& 1.5 times default size)
" h3 (causes a paragraph break, makes the font bold
& 9/8 default size)
" h4 (causes a paragraph break, makes the font bold)
" h5 (causes a paragraph break, makes the font bold
& 5/6 default size)
" h6 (causes a paragraph break, makes the font bold
& 5/8 default size)
" center
" big (increases font size by 2 points)
" small (decreases font size by 2 points if it's 8
points or larger)
" b
" i
" s
" strike
" u
The supported HTML attributes are:
" align
" face
" size
" color
" style
" font-family
" font-size
" font-style
" font-weight

HT204053 I changed my apple id, but my ipad does not allow me to change it for Icloud, so I can't edit my account so I can access Icloud. I was told at Apple store that I could use both Apple ids, but my old one is no longer recognized. Any suggestions?

I changed my apple id, but my ipad does not allow me to change it for Icloud, so I can't edit my account so I can access Icloud. I was told at Apple store that I could use both Apple ids, but my old one is no longer recognized on the appleid website, so my password for my old apple id won't work.
Any suggestions?

If you only changed the name of your ID rather than creating a new ID, just go to Settins>iCloud and tap Delete Account then sign back in with the new name. (Deleting the account from your phone does not delete it from iCloud. Your data will be synced back to your phone when you sign back in.)
If you created a new ID, you'll have to go to Settings>iCloud on your phone and turn all data you are syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on your iPhone. (If you are syncing iWork documents with iCloud, also open your iWork apps and turn off iCloud syncing and choose to keep the documents on your phone.) After everything is turned off, scroll to the bottom and tap Delete Account. Next, set up a new iCloud account using your other ID, then turn syncing for your data (contacts, etc.) back to On. When prompted, choose Merge. This will upload the data to your new account.
You won't lose any photos in your camera roll or photo library. If you have any photos in your photo stream that are over 30 days old that are not in your camera roll or saved on your computer, be sure to save these to the camera roll before deleting the account. To do so, open the photo stream album on your iPhone in the thumbnail view, tap Edit, tap all the photos you need to save to select them, tap Share, then tap Save to Camera Roll.

Management Studio 2008 does not refresh after table create / alter

hello
Management Studio 2008 does not refresh after table create / alter, why?
f5 / refresh button does not work in "Object Explorer".... i always need the restart the whole application to see any changes, this is strange...
regards, jan

Hi jm,
I’m writing to follow up with you on this post. Was the problem resolved after performing Vishal ‘s steps? If you are satisfied with our solution, I’d like to mark this issue as "Answered". Please also feel free to unmark the issue, with any new findings
or concerns you may have.
Thanks,
Sofiya Li
Sofiya Li
TechNet Community Support

Release strategy does not reset after PO change - tried changeability 4 & 6

Similar Messages

Maybe you are looking for