Max column number?

Hi, I have been making a site and using mysql db.
What should be the max column numbers in a table?
One of my tables has about 60 columns in which clients information kept.
Is that makes any problem?
Or shall I divide smaller tables?
Thanks...

regerybets wrote:
Hi, I have been making a site and using mysql db.
What should be the max column numbers in a table?
One of my tables has about 60 columns in which clients information kept.
Is that makes any problem?
Or shall I divide smaller tables?
Thanks...The number itself is not a concern you should have. The problem is having data grouped together that does not belong together.
Read up about table normalization in a relational database. Usually you would strife for the third normal form (3NF).
Edited by: SabZero on Nov 26, 2009 12:21 PM

Similar Messages

Hyp FR Error: 5200 : Error executing query. Exceed max row number 100000

Hi,
I am getting the error
5200 : Error executing query. Exceed max row number 100000
when I run the report on Financial Reporting. It gives the same error when run on Workspace.
Have you guys encountered this error before? What are the best ways to tackle it? Help is much appreciated guys.
-- Adi
Edit 1 - I tried to simplify the parameters but I still get the same error making me suspect that the issue is not the 100000 row issue.
Edited by: Aditya26 on Apr 11, 2012 9:02 AM

Hi Adi,
This is from My Oracle Support:
How to Increase Row Limit to Avoid Error "Exceed Max Row Number 100000" [ID 866832.1]
Modified 23-FEB-2012 Type HOWTO Status PUBLISHED
In this Document
Goal
Solution
Applies to:
Hyperion BI+ - Version: 9.3.1.0.00 to 11.1.1.3.00 - Release: 9.3 to 11.1
Information in this document applies to any platform.
Goal
How do you increase the maximum row limit to avoid the error "5200: Error executing query: Exceed max row number 100000"?
Solution
1.Edit \Hyperion\common\ADM\<version>\lib\ADM.properties as follows:
From MAX_ROW_NUMBERS=100000 to MAX_ROW_NUMBERS=500000
If you are running extremely large reports, you can increase the limit.
2.Restart Reporting and Analysis services.
For version 11.1.2.x
The path of ADM.properties file in these versions should be located under:
%Oracle_Home%\Middleware\EPMSystem11R1\commo\ADM\11.1.2.0\lib
Cheers,
Mehmet

Max. Number of connections in use Nokia N93

Hi
I am trying to connect to wireless router using WEP. I have configured the access point and when I try to connect with Opera Mobile 3.6 an error occurs:
Max. Number of connections in use. Close na active connection first.
Note that my phone is not woring in dual mobe but GSM only.
When I try connecting with the Phone's browser:
WLAN: Unable to connect. WLAN Network not found
Lumia 920 OS version: 8.0.10521.155
FW revision number: 3047.0000.1326.2002

Every time you up-date the firmware, you get from your network opperator the settings for various access points (Internet, MMS, Vodafone Live, whatever....) This leads to duplicates (or even mode) access-points. Moreover, some of these access points are saved as "default" access point in various applications. This is where the mess starts.
To clean-up the mess, you first have to REMOVE all duplicate access points and keep only one access point for each purpose: Internet connection, MMS, Live (if you are are on Vodafone), etc. After this, you will probably get messages from various applications to define a new default access point. And things will be sorted our automatically.
Hope this helps, even though it might not be simple for some.
2110i, 6150, 6210, 6310i, 6670, 9300, 9300i, E90, E72, HTC Touch Pro2, Samsung Galaxy S, Samsung Galaxy S II

Displaying the Row and Column number in the report

I am trying to show row and column number in the report (not just web preview). I am using Hyperion Reports Version 7.2.5.168

use a formula column/row. use RANK function in that. (e.g. Rank([A], asc) will sort the rows based on column A values in ascending order)
you can use this rank in your heading.
But frankly this is not so easy. You have to do it in a very intelligent way, so that rank gives you column number/row number any how.
Have a try and let see if you find a appropriate solution.
Regards,
Rahul

Column number in JTextArea?

Hi
How do I get column number of current cursor
in JTextArea? I need to display this info
in my editor.
This is complicated by the fact that tab size
is not fixed, typing a combination of space
and tabs randomly can result in tabs
having tab size of 1 amid normal tabs.
Hence counting the number of chars in the
current line up to cursor position, call it C,
then C minus number of tabs, T and plus
T * tabSize won't work because tabSize is
sometimes 1.
Thanks
miawomi

Hello
Just figure out how to do this. In case anyone
get stuck with the same problem, here is my
soln:
JTextArea textArea = ...
int caretPos = textArea.getCaretPosition();
int lineCount = textArea.getLineCount();
int tabSize = textArea.getTabSize();
int currentLine = 1;
String str = "";
int c = 0;
try {
currentLine = textArea.getLineOfOffset( caretPos );
int startOffset =
textArea.getLineStartOffset (currentLine );
str = textArea.getText( startOffset,
caretPos-startOffset );
FontMetrics fm = textArea.getFontMetrics( textArea.getFont() );
                    StringBuffer buffer = new StringBuffer();
for ( int i = 0; i < tabSize; i++ )
buffer.append(" ");
int tabWidth = fm.stringWidth( buffer.toString() );
for ( int i = 0; i < str.length(); i++ ) {          char C = str.charAt( i );
                         if ( fm.charWidth( C ) == tabWidth )
                              c = c + tabSize;
                         else
                              c++;
               } catch ( BadLocationException ex ) {
                    ex.printStackTrace();
If anyone has a much less cpu intensive solution,
please let me know.
Thanks in advance
miaw

Getting the row and column number from the caretposition

Howdy peeps
Does anyone know how to find out the Line number and column in a JTextPane by using the caret position
(you know like in text editors where it says 100:4 [line number:character position on row])
is there a simple way of doing this in a JTextPane?

im getting a bit confuzzled with this :(
can someone help me out with a bit more code orientated help? :$
i have a jTextArea and a JTextField, when i change the caret in the text area i want the JTextField to show the line number and charater position on the row (e.g. 100:4)
so i assume i need to methods
e.g.
getPaneRow
myint=myPane.getCaretPosition()
do some wonderful magic code to get the line number
return line number
getPaneColumn
myint=myPane.getCaretPosition()
do some wonderful magic code to get the column number
return column number
is there a magician out there that can give me the magic powder? :)

Summary Links web part not showing correct column number

Here is my scenario. I have a simple two server dev farm that is using a snapshot of production data. I have migrated the 2010 content db over and everything is running fine. One quirk I have noticed is with the summary links web part. If I add the webpart
to a page, in the configuration settings for the webpart you can create named groups and the next setting is how many columns you want the links to appear in. When I select lets say "4" columns, and I create four groups. When I save and check in
the web part only shows "3" columns instead of 4.
For Example.
I create groups: Group 1
Group 2
Group3
Group 4
In the webpart configuration I select "display number of columns" = 4
When I save that setting and look at the web part the groups will appear as:
Group 1 Group 2 Group 3
Group 4
when in reality if the column setting is = 4, I would expect:
Group 1 Group 2 Group 3 Group 4
So it appears it is behaving as if whatever column number you select, what is displayed is N-1.
Has anyone else had this happen in SharePoint 2013? The same webpart doesn't behave this way in the 2010 production environment where dev gets its content. Any help would be great.
Thanks,

Hi againeyuga,
Yes, I have tested in my SharePoint Server 2013 with December 2013 CU and it works fine. For your environment, I recommend you install the SP1 update.
Best Regards,
Eric
Eric Tao
TechNet Community Support

Why order by clause maintains column number values instead of column names

why order by clause maintains column number values instead of column names ?

we can use oder by 1,2 as column number
UGNo one said that it can't be used. What's your point?
To OP: It can be written with the column's 'select list positional number' just because for the support of laziness. :)
There's no difference between 'ORDER BY name, address' and 'ORDER BY 1,2'.

Get the raw/column number of a left-mouse clicked table cell

is this possible to get the row/column number of
a cell where a mouse is clicked? Accutally, i want to implement a
dynamic one column list which the user can "Add" or "Delete" some entries. The
"Add" function is all right. The "Delete" function
makes me upset because I cannot catch the cell's location where the
mouse is choosing. I tries to use "Active Cell", it seems does not
work. Do you have any clue? is this possible to implement the dynamic list using the "listbox"? thanks

I would use the EditPos property value. In my testing, it always returned the row and column of the cell I had left-clicked on.

Purchase order row basecard column number

hi
any one help me what is purchase order row basecard column number.
Thanks & Best Regards
B.Lakshmi narayanan

Hi,
Could you clarify your reguest?
Thanks,
J.

(wls61sp4)java.sql.SQLException: Invalid column number [jDriver for MSSQL]

Hi,
Could any one help me?
We use weblogic 6.1 SP4 and SQL2000 SP3, and we weblogic's JDBC driver(mssqlserver4v65).
It seems the JDBC connections is not stable and sometimes throw the exceptions:
==========================================
java.sql.SQLException: Invalid column number (2). This table has 1 columns (a valid index is 1 trough 1).
java.sql.SQLException: Invalid column number (2). This table has 1 columns (a valid index is 1 trough 1).
at weblogic.jdbc.mssqlserver4.TdsResultSet.getEntry(TdsResultSet.java:193)
===========================
Thank you.
--Ted

Ted wrote:
Hi,
Could any one help me?
We use weblogic 6.1 SP4 and SQL2000 SP3, and we weblogic's JDBC driver(mssqlserver4v65).
It seems the JDBC connections is not stable and sometimes throw the exceptions:
==========================================
java.sql.SQLException: Invalid column number (2). This table has 1 columns (a valid index is 1 trough 1).
java.sql.SQLException: Invalid column number (2). This table has 1 columns (a valid index is 1 trough 1).
at weblogic.jdbc.mssqlserver4.TdsResultSet.getEntry(TdsResultSet.java:193)
===========================
Thank you.
--TedCan you reliably reproduce this? Are you sure the query being sent returns
more than one column? You should be using the mssqlserver4v70, not v65, for
sqlserver2000.
Joe

Is there any option in JTable to add the column number

Hi,
I am using JTable to show some data read from database.
I want to add the column number autometically.(Without by talking a variable and incrementing that by 1.After that add that to the first column.)
I want just like a auto increment row number.
Is there any option in JTable?
Thanks

                    for(int i = 0; i < table.getRowCount(); i++){
                        table.setValueAt(i, i, 0);
                    }

Max columns of a table.

Why Oracle has a limit on a column number as 1000 and why it doesn't have limitation on rows?
Thanks,
Karthik.

Limit is 1000 for both versions
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96536/ch44.htm#288033
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14237/limits003.htm

In Primavera Risk Analysis, the MIN. ML, MAX columns is for imput the minimum impact, most likely impact , maximum impact duration of a risk or the remaining duration for MIN, ML and adding remaining duration with maximum impact for MAX?

In Primavera Risk Analysis, the MIN. ML, MAX columns is for imput the minimum impact, most likely impact , maximum impact duration of a risk or the remaining duration for MIN, ML and adding remaining duration with maximum impact for MAX?

You are welcome. I'm glad you got it back up.
(1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
(2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
(3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
(4) Add some SARE rules:
Visit http://www.rulesemporium.com/rules.htm and download the following rules:
70sareadult.cf
70saregenlsubj0.cf
70sareheader0.cf
70sarehtml0.cf
70sareobfu0.cf
70sareoem.cf
70sarespoof.cf
70sarestocks.cf
70sareunsub.cf
72sare_redirectpost
Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
backhair.cf
bogus-virus-warnings.cf
chickenpox.cf
weeds.cf
Copy these rules to /etc/mail/spamassassin/
Then stop and restart mail services.
There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

A row delimiter should be seen after column number

A column delimiter was seen after column number <70> for row number <533394> in file
The total number of columns defined is <70>, so
a row delimiter should be seen after column number <70>. Please check the file for bad data, or redefine the input schema for
the file by editing the file format in the UI.
So i checked the flat file i was trying to retrieve the data for the row number and checked the last column and did not find anything unsual in that row that could have caused this error.
There are 70 columns and it proposes there is a problem in the last column. I checked but there were no carriage return
Please help me on this.

It appears to me the problem with the particular row(s).
I suggest open the file in notepad if not very big and look at the record number 533394.
you can also use u2018Overflow fileu2019 option in the error handling section on the target table under the option tab to find out the bad record(s).
Regards,
Vibhor

Max column number?

Similar Messages

Maybe you are looking for