Maximum file size data that can be send to MQ using mq adapter

Dear All,
What is the maximum file size data that can be send to MQ using mq adapter ?
The file can be csv, fixed , xml.
Please let me know if anybody is aware of any limitations
Best Regards
Arc

If you are on 10g then you are looking at a limit of 7MB, although any messages over 1MB will require some tuning.
You can integrate using the native schema, or xml so you can use csv, fixed length, and xml files.
cheers
James

Similar Messages

Photoshop can not print the maximum amount of data that can be spooled to a PostScript printer is 2G

Hi all,
This is the first time I've worked with the .psb (large format) size and I have gone to print a PDF of the file and I get the message:
"photoshop can not print this document because the document is too large. The maximum amount of data that can been spooled to a PostScript printer is 2GB".
The file itself is a 2700x1570mm 300dpi flatten .psb image that is 500mb in size.
Not sure how I can get around this, where abouts do I see the image size information that is being spooled?
Any help would be great

There's no easy way to see the size of the image that's being spooled, but 2G limit is uncompressed, 4 bytes per pixel (either RGBX where X is a padding byte, or CMYK, depending on the image / printer), times about 1.6 because the image data is sent in ASCII85 format rather than binary.
With your image at over 100 inches at 300 dpi, you're also perilously close to the 32k limit on the pixels in any one dimension (31,900 by my calculations) that PostScript can handle.
The limits are 32767 pixels in either dimension, and 2GB of data total. The data that's sent at 4 bytes per pixel, and converted to ASCII85 so that it'll make it across any connection. ASCII85 gives about a 1.6 expansion factor, if I remember correctly.
Do you really need a 10 foot image printed at 300 dpi? If not, changing down to 200 dpi will probably let this image print.

Maximum File Size? How can I stop a "Send" in progress?

What is the Maximum File size you can send?
(Can't find it indicated anywhere on the Adobe site. Just says "large" files. I hope Adobe's definition of Large matches my needs.)
Is there a way to stop the process of a "send" ?
I am in the middle of sending a large zipped file to an email address (around 6GB, note: apparently JPEG's don't actually get smaller when you compress them) and it's taking a long time. I'd like to stop this and send a smaller zipped file first, but the "Cancel" button did not stop the process. Anyone know?
Thank you

Hi mariehill,
[Mosaicriver, I believe I saw that your questions were answered by Bob on a separate thread; let me know if you need any further assistance.]
At the moment, the Adobe Send team is working hard to improve the service's functionality with very large files. Mariehill, how large is the file you're trying to send? You may also want to check your upload speed, as that could affect the success of the sending process. If you continue to have trouble, we recommend trying the following:
1. First, try uploading the file you'd like to share to your Acrobat.com file storage, and then sharing the file from there. Let me know if you need more detailed info on how to do that.
2. If you've got a subscription to Adobe Send, you can also use the old SendNow service for the time being; the two products will coexist for a while longer until SendNow is retired later this year.
We apologize for any inconvenience; we'll post to this forum when we have updates from the team about changes and improvements to the Adobe Send service. Let me know if there's anything else I can help you with!
Best,
Rebecca

Maximum file size that OSB can handle for JMS

Hi,
We have a requirement to process 60MB xml files over JMS in Oracle Service Bus. While prototyping this we are facing heap space errors.
Can somebody let me know what is the maximum file size that we can process? The scenario is as below.
JMS --> OSB --> JMS --> OSB --> JMS
Thanks

if you don't need to access the entire content of the message, you can try using content streaming
(see this OSB - Iterating over large XML files with content streaming discussion)
See also here http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/userguide/context.html#wp1110513 for best practices.
Otherwise I have noticed myself that OSB is very hungry in memory when loading large messages. I had trouble even with a 5 MB binary file being loaded - this would take 500 MB RAM. in these cases I would rather look for ETL tools such as Oracle Data Integrator or Open Source Pentaho.

Maximum file size that can be ulpoaded at one time

Hi All,
I have an issue in which user is uploading 200 MB file in to KM. But she is getting "IisProxy.dll: 502 Bad Gateway" error.
I have tried uploading a document and was successfull in uploading 93 MB document and while uploading above this (93MB) i was getting Page cannot be found error.
I have found in refrences of same as in SAP note 820028 and on
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/25/b0a4f6f2b03a43a727a165a4d6a555/frameset.htm
Please advice me what shoud be the maximum file size that can be uploaded at one time.
Thanks in advance.
Honey

Hi,
By default the maximum file size is 128 MB. You can configure that in visual administrator.
http://help.sap.com/saphelp_nw04/helpdata/en/05/35e13d8ee48f5ee10000000a114084/frameset.htm
If you as administrator need to upload a file with larger size, you can use km file repository like etc. and can upload file from OS.
Regards
Baby

MAXIMUM SIZE OF DATA THAT CAN BE HANDELLED BY SOAP ADAPTER

hi 2 all,
Soap adapter is calling webservice through bpm.So i but its taking time to call the webservice.So i wanted to know,what is the maximum size of data that can be handelled by the adapter.

There is no maximum size. It depends on your h/w configuration and also the consuming applications response times as well.
Ideally a payload size of 5 - 10 MB provides the best performance.
Regards
Bhavesh
PS: Please do not use Captials on the Internet.

HT4436 What is the maximum file size that can be attached to an outgoing email on my iCloud account?

What is the maximum file size that can be attached to an outgoing email on my iCloud account?

20mb, but I would suggest leaving a little space. 15 is reliable.

What is the maximum File Size we can send

Hi Experts,
I have done simple scenario file to file without IR.
I have one doubt here, what is maximum file size (Text and XML)we can transfer from source to target ftps.
text file = file size?
xml file = file size?
Thanks for inputs.
Bhaskar

There is no limit to the message size (file size) that can be transfered.....the only thing required is that your server should have the necessary configuration (hardware) to handle a file of a particlar size.
this question is actually asked a couple of times and in there people have even mentioned the transfer of files in 1GB ... so it all depends on your Hardware.
Regards,
Abhishek.

My service is converting from SendNow Plus to Adobe Send; what is th maximum file size?

My service is being converted from Adobe SendNow Plus to Adobe Send. There is very little detail on differences that I can expect between the two services.
What is the maximum file size that I can send? Is there a maximum?
Do I have a storage limit? It was 2GB with SendNow.
The files in SendNow have a time limit, but I cannot find anywhere this is defined in Send.
Lastly, my subscription rate is higher than the rates quoted on the Adobe website, but I cannot find a way to correct this or make a change.

Hi Raghuveer,
Thanks for quick reply. Sorry, I prefer not to share my designs so I cannot send you my sample of Ai file or screenshots. I hope you understand.
Anyway, I have about 50 to 60 elements used 3D effects and 60 elements used brushes. And about 20 some elements I defined as pattern swatches (about half of them used gradient). Also, added drop shadow, zigzag effect and accent edges on 5 elements. And 3 layers filled with patterns (my artboard size is 1220 px W x 1500 px H). I have my layers/artboard/ color & pattern swatches/ appearance panels opened up when working in Ai.
I hope this gives you some idea how much I am doing and what I am doing with my Ai file. And hope that you can advise if there should be problem if doing a lot in one file? I just cannot stop designing sometimes.
Added this- I have 18 artboards and 22 layers in my Ai file. Photoshop doesn't have this problem when working with a lot of layers, only Illustrator does.
Thank you very much!!
mykw123

Unable to send x-file-name, x-file-size date in "x- requested-with = XMLHttpRequest" on new 7.0.1 version.Previous version its working

I am using xmlhttprequest to send image in cross domain. in Previous version it was working fine, but on "7.0.1" version request doesn't contain x-file-name and x-file-size data.
Request Header of version mozilla 7.0.1
[Host] => localhost
[User-Agent] => Mozilla/5.0 (Windows NT 5.1; rv:7.0.1) Gecko/20100101 Firefox/7.0.1
[Accept] => text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
[Accept-Language] => en-us,en;q=0.5
[Accept-Encoding] => gzip, deflate
[Accept-Charset] => ISO-8859-1,utf-8;q=0.7,*;q=0.7
[Connection] => keep-alive
[If-Modified-Since] => Mon, 26 Jul 1997 05:00:00 GMT
[Cache-Control] => no-cache, no-cache
[X-Requested-With] => XMLHttpRequest
[Content-Type] => multipart/form-data-
[Referer] => http://localhost/ajay_upload/tpl_upload_test_default.php
[Content-Length] => 31082
[Pragma] => no-cache
Request Header of same code on Chrome:
Array
[Host] => localhost
[Connection] => keep-alive
[Referer] => http://localhost/ajay_upload/tpl_upload_test_default.php
[Content-Length] => 188742
[Cache-Control] => no-cache
[Origin] => http://localhost
[X-File-Size] => 188742
[X-Requested-With] => XMLHttpRequest
[If-Modified-Since] => Mon, 26 Jul 1997 05:00:00 GMT
[X-File-Name] => 2.jpg
[User-Agent] => Mozilla/5.0 (Windows NT 5.1) AppleWebKit/535.1 (KHTML, like Gecko) Chrome/13.0.782.218 Safari/535.1
[Content-Type] => multipart/form-data-
[Accept] => */*
[Accept-Encoding] => gzip,deflate,sdch
[Accept-Language] => en-US,en;q=0.8
[Accept-Charset] => ISO-8859-1,utf-8;q=0.7,*;q=0.3
Thanks In Adv

A good place to ask advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.<br />
The helpers at that forum are more knowledgeable about web development issues.<br />
You need to register at the mozillaZine forum site in order to post at that forum.<br />
See http://forums.mozillazine.org/viewforum.php?f=25

Maximum file Size PI 7.1 Can handel

HI ALL,
1)any idea like the maximum file size PI 7.1 can handel if there is no File Content conversion .Say if PI is working like a FTP server ..
if there is anymothed to calculate it in MB.. ?
2)Bacause i have a Flat file of size 400 MB .once i activate the sender communication channel it gets struck ..pls let me know how can i handel this file of 400 MB .. ? customer is looking for some method to handel this .. ?
regards
Souz

>
Dominic Souz wrote:
> HI ALL,
>
> 1)any idea like the maximum file size PI 7.1 can handel if there is no File Content conversion .Say if PI is working like a FTP server ..
>
> if there is anymothed to calculate it in MB.. ?
>
> 2)Bacause i have a Flat file of size 400 MB .once i activate the sender communication channel it gets struck ..pls let me know how can i handel this file of 400 MB .. ? customer is looking for some method to handel this .. ?
>
> regards
> Souz
The best solution to handle this type of requirement is Using JAVA proxy only,write logic to split the file 10mb only,becaus its not advisable to process more than 10mb files,even SAP say they tested with 1gb.
i had experiece the same in one yeay back,we resolved using JAVA proxy,how to split the file is just take number of lines or try to fine other way...
Regards,
Raj

How can i reduce the pdf file size? I need to send via email, at the moment its at 10mb

How can i reduce the pdf file size? I need to send via email, at the moment its at 10mb

Reducing PDF file size or Optimizing PDF is the feature that is supported only by Acrobat Pro (desktop app that is not free).
Optimizing PDFs (Acrobat Pro)
Free Adobe Reader products (Reader XI desktop, Reader for iOS, Reader for Android, Reader Touch for Windows 8, etc) do not offer the capability.

What is the maximum file size Flash Catalyst beta 2 can import?

I have designed the webpage in Illustrator cs2 and tried to import to Flash Catalyst beta 2 (FC), however it does not respond to me at all. I think maybe my AI file size is too big. Therefore I reduced my AI file down to 1 page only and now FC has no problem importing my file. I would like to know what is the maximum file size that FC beta 2 can import? thanks

In beta1 I believe the max size was 15megs, I am not 100% for Beta2 but I doubt they would have changed the amount.
I created an online menu for a fake restraunt for fun, the file was quite large with the high-res photos in it. How I got the whole file into Catalyst from Photoshop is I removed the large background images and then imported them individually into the Catalyst project.
Hope that helped

What is the Maximum File SIZE Can we transfer through XI.

Hi All,
What is the Maximum File SIZE Can we transfer Through XI?
With Regards,
Mahesh

HI,
Please refer the below thread which talks about the same.
Wat is the maximu size of data XI can handle
There can be many threads related to this topic I suggest u try to serach on SDN first.
Thnx
Chirag

DeserializeJSON - is there a limit on the size of the JSON data that can be converted?

I have some valid JSON data that's being converted successfully by DeserializeJSON... until it gets to a certain size, or that's certainly what appears to be happening. The breaking point seems to be somewhere in the neighborhood of 35,000 characters... about 35KB. When the conversion fails, it fails with a "JSON parsing failure: Unexpected end of JSON string" message. And when the conversion fails, the JSON data is deemed to be valid per tools like this one: http://www.freeformatter.com/json-validator.html.
So, is there a limit on the size of the JSON data that can be converted by DeserializeJSON?
Thanks!

Thanks Carl.
The JSON is being submitted in its entirety, confirmed by Fiddler. And it's actually being successfully saved to a SQL Server nvarchar(MAX) field too. I can validate that saved JSON.
I'm actually grabbing the JSON to convert directly from the SQL Server, and your comments / thoughts led me down the path of resolution.
Turns out that the JSON was being truncated prior to getting to the DeserializeJSON command, but it was the cfquery pull that was doing the truncating. The fix was to enable "long text retrieval (CLOB)" for this datasource in CF Admin. I'd never run into that before or even knew that this setting existed.
Thanks again for your comments!

Maximum file size data that can be send to MQ using mq adapter

Similar Messages

Maybe you are looking for