Maximum number of members in 6.5 outline

Hi, Could anybody tell me, what is the limitation ofnumber of members in Essbase 6.5 outline? Thanks.

The limit is 1,000,000 (1 million) explicitly defined members per block storage outline in version 6.5-7.1

Similar Messages

Maximum number of members in ASO outline

Hi All,
We are using Essbase 11.1.2.1. We have ASO cube with 11 dimensions, 1 dimension is expected to have more than 30 million members. Is that allowed ? What is the maximum limit for members in ASO cube ?
Also how to improve performance for such cube ?
Kindly advice.

I believe the answer is no. The maximum number of members is 20 million: http://docs.oracle.com/cd/E17236_01/epm.1112/esb_dbag/frameset.htm?limits.html#limits_8
Cheers,
Mehmet

Maximum number of members in a dimension in ASO 11.1.2.1

Hi all,
Is there any limitations on number of members in a dimension in ASO 11.1.2.1?
Also can we predict the maximum number from the 64 bit theory as described in the DBAG?
I guess the maximum must be more than 20 million which I believe was the limit in Essbase 7.
We are working on an application for customer analysis where number of customer will be much more than 20 million.
Can anyone tell me what is the maximum number of members they have seen in one ASO dimension?
Thanks.

Hi Rav,
Is it somewhere documented about the limitation of 20M members? What I see in the dbag page 34 of chapter 62 is "64-bit Dimension Size Limit for Aggregate Storage Database Outline" where it says maximun bits for a leaf member can be 64 and bits are determined by log2(no of members). From this calculation, number of members can be lot higher. Please let me know if this 20M member limitation is documented somewhere.
Many thanks.

Maximum number of members in a dimension (BSO)

we are designing a new planning application and the requirement for one of the dimensions may force us to have a large number of members. I needed a ballpark figrue on what the maximum number of members should be in planning for it to work in an acceptable manner (aggregate times, run time calculations etc) ... the number we are looking at is over 30,000 members and another 15,000 shared members 10-11 levels deep. If any one has experience with such large dimension, can you shed some light on how long the aggregation times would take and if we use it in form, how best to agg the RTPs for that dimension? thank you in advance.

Check out below posts:
For facts:
Members in Essbase
Maximum members in a Dimension
For limits:
Maximum members for a Dimension in a BSO cube
Cheers..!!

Maximum number of members in a dimension

Hi,
Is there a limitation of number of members in a dimension in Oracle Olap?
Thanks,
Krishna

I think you got answer for this, which I'll post here for the benefit of other viewers:
"There is no hard limit on the number of members of dimension in Oracle OLAP. You may run into some practical limits based on your HW and cube design, but that won’t be until you’re dealing with dimensions in the multimillion member range."
Say you have a dimensions of 2 million values and another 3 dimensions with 1000 values each. Potential size of the cube if full of data is 2,000,000 * 1000*1000*1000 which make it big. Say you have a couple more dimensions 10,000 and 10,000 ..even bigger.
Compressing the cube to make sure its as small as possible, where patterns of null cells are not stored is good practice most of the time, especially great when there are lots of null values when there's large dimensions. Partitioning and general good modelling are also key. See the OLAP User's Guide for more information.

Maximum no of members in Essbase Dimension can support

Dear All,
I am using Essbase 11.1.2.2 (64-bit)
Number of dimensions used in my BSO Essbase cube is 9 (4-dense and 5 sparse).
I am having a Customer dimension (sparse) upto 7 levels.
The number of members in customer dimension is 98000.
After loading data in essbase BSO cube, while performing Ad hoc Analysis it throws the following error in Smartview,
"Request timed out contact your administrator to increase netretrycount and netretryinterval"
After making changes to below variables in registry and essbase.cfg files
NETDELAY 500
NETRETRYCOUNT 400
Registry settings
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings]\
ReceiveTimeout=480000
KeepAliveTimeout=180000
ServerInfoTimeout=180000
and also with
ReceiveTimeout=900000
KeepAliveTimeout=300000
ServerInfoTimeout=300000
I am getting the following error
"Concurrent requests on the same session are not allowed. Wait till the previous request completes processing"
After i reduced the no of members considerably in Customer dimension, the issue got resolved.
My question is "Do we have any limitations in maximum no of members in a single dimension"
What is the maximum no of members a Essbase dimension can support ?
Regards,
Tharik

To answer your specific question, the limits are listed here: http://docs.oracle.com/cd/E26232_01/doc.11122/esb_dbag/limits.html. According to that, BSO will handle 1,000,000 members.
My question would be what exactly you are doing when the error occurs. Does it happen when you attempt a drill to level zero for example? Or as soon as you retrieve an ad hoc sheet?

Missing parent members in 3.1 Outline Extractor

All, I am using OLAP Underground 3.1 Outline extractor. The server is windows 2003 and I am using Hyperion Essbase 6.5.7 I am taking a dimension that has been updatred and manipulated and trying to get it into 50 other databases in a automated process. I have built the automated process but the problem is with the outline that is extracted using 3.1 outline extractor, it is missing several parent members. This dimension has 27,598 members. Thanks Anthony

I was running into the same issue on dimensions with a large number of members. If I remember correctly it is a known bug that they plan to address in some future release of the Outline Extractor.

What is the maximum number of contacts in a group that will send in an iCloud email? I'm sending from MacBookPro.

What is the maximum number of contacts in a group that will send in an iCloud email? I'm sending from MacBookPro.

Limits on Sending Messages
iCloud has several safeguards to ensure that only iCloud members can send messages using the iCloud outgoing mail server. Among these safeguards are reasonable limitations on:
The total number of messages you can send each day (200 messages)
The number of recipients to whom you can send each day (1000 recipients)
The maximum number of recipients per message (100 recipients)
The size of incoming and outgoing messages (20 MB)
You can send 10 emails to 100 people each in a day, for example, or 198 messages with, on average, 5 recipients (and five ninety-ninths).

Create standby maximum number of logfiles for each thread

The oracle doc states this equation for appropriate number of standby redo log file groups
(maximum number of logfiles for each thread +1) * maximum number of threads
How do you get the maximum number of logfiles for each thread and the max thread?
Thanks!

If you are running RAC you can, in theory, be running with a diferent count
of Online Redo Logs in each thread (instance).
However, normally, you would have the same number of Redo Logs in each
thread.
The theoretical max is prescribed at the CREATE DATABASE and can be
changed with a CREATE CONTROLFILE. If you do an
ALTER DATABASE BACKUP CONTROLFILE TO TRACE
the sql script in the tracefile shows the maximum number of logs and members.

Nokia C2-01 Help- Maximum Number of Notes Allowed

Dear Members and Support,
Please help me out. I wanted to buy Nokia C2-01 but i wanted to know what is the maximum number of notes allowed. Is it restricted to 15 (or something more) or unlimited notes are allowed.
Help me make a confident purchase
Regards,
striker

I didn't know there is limit on notes. As per my knowledge the limit is there only in basic phones and in these its based on the amount of phone memory available

HT204053 The maximum number of free accounts have been activated on this iPad - what to do??

In trying to sign in to my iCloud account on a new (to me) iPad, I get the message that "The maximum number of free accounts have been activated on this iPad".
Anyone know the resolution to this issue? The iPad previously belonged to two other staff members and now won't let me use iCloud.
Thanks!

Welcome to the Apple community.
Unfortunately, once all your ICloud accounts have been used up on your device, you cannot create any more, no matter what you do. You will need to either reuse one of the accounts you have already created or use another device to create your account.

Maximum number of logfiles for each thread

Hi all,
When I configure a Standby Redo Log, to determine the appropriate number of standby redo log file groups, I should use the following formula:
appropriate number of standby redo log file groups: (maximum number of logfiles for each thread + 1) * maximum number of threads
My question is: how can I determine the maximum number of logfiles for each thread ? Is it the online redo log file per group? or total of redo log files in all groups?
SQL> ed
Wrote file afiedt.buf
1* select group#, thread#, sequence#, members from v$log
SQL> /
    GROUP#    THREAD# SEQUENCE#    MEMBERS
         1          1         40          1
         2          1         38          1
         3          1         39          1

user8994263 wrote:
Hi,
If you have 5 redo log groups on primary, do you suggest to create 6 standby redo log groups on standby?
If yes, why ?
-KalidasYou did two mistakes
1) Responded to old question Posted: Jun 1, 2010 8:52 PM
2) Its not your question & asking into others threads.
-- Please lock this thread

ORA-00020: maximum number of processes (%s) exceeded

nobody was able to log into the database. when I tried 'sqlplus / as sysdba' I got : ORA-00020: maximum number of processes 1000 exceeded
database is 11.2.0.2 with patch 12
I've bounced the database and increased the processes..
my question is.. is there a way to tell what the processes were? what machine they were coming from? in a log somewhere..
Since I was unable to log in, I couldn't tell what had happened.. who was causing it..
if it happens again.. is there a way to log it?
also, this machine has DataGuard to a standby system.. is it possible for something to go wrong with dataguard and cause this?

>
my question is.. is there a way to tell what the processes were? what machine they were coming from? in a log somewhere..
Since I was unable to log in, I couldn't tell what had happened.. who was causing it..
if it happens again.. is there a way to log it?
also, this machine has DataGuard to a standby system.. is it possible for something to go wrong with dataguard and cause this?
>
You have only treated the symptom and not fixed the cause. As fellow members said, you could kill some "non-critical" processes and log in to the database.
But you will have to find out why there were so many processes in place. I am sure you might have set the definite number of processes after your planning before you went live. If you suddenly see too many processes, you will have to find out why and where they are coming from. Also check if there are any rogue processes.
To find out if there are any processes which have no sessions attached
select spid from v$process where addr not in (select paddr from v$session);
To answer your question, data guard shouldn't be affected by this. Nor would dataguard cause this issue in primary.
Fix this processes issue before it's too late. Otherwise, there will be a situation when you will have to keep increasing the processes until you hit the OS limit
Regards
Venkat

Maximum number of switches in a stack?

What is the maximum number of WS-C3750X-48P-S switches I can have in a stack? IOS is 12.2 (55) SE3

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
As Glen aready noted, the limit is nine for data stacking (StackWise). 3750-X power stacking (Stack Power), between stack members, is limited to 4.
Also note, large 3750 stacks can sometimes be very sluggish doing some CLI commands.
And also note, although StackWise Plus supports "spacial reuse" for unicast traffic, large stacks might congest the ring sooner.
Lastly, for very large stacks, a chassis might be a better and/or less expensive solution.

SPD 2013 WF Error: Maximum number of arguments per activity (50).

Hi,
We have hit a limit with using variables in SPD Designer workflow in SP2013. The following is the error message that we receive:
"Microsoft.Workflow.Client.ActivityValidationException: Workflow XAML failed validation due to the following errors: Activity 'DynamicActivity' has 52 arguments, which exceeds the maximum number of arguments per activity (50)."
The following thread >>here
did provide a solution but we need a solution that's based on Powershell or Server Object Model. Is there an approach for changing the variable limit for workflows with Server Object Model/Powershell?
Blog: http://dotnetupdate.blogspot.com |

Hi Vikram,
as i know if you want to change this, there is no other way then to update the database directly, that we strongly not recommend this to be done.
they may not have any powershell or server object modal command to update the database value directly, instead you need to try on your environment, here is the example to access sql from powershell:
http://technet.microsoft.com/en-us/magazine/hh289310.aspx
to check the database, you can use the database explorer to develop the code:
http://moresharepoints.blogspot.in/2014/01/sharepoint-designer-2013-workflow-error.html
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Maximum number of members in 6.5 outline

Similar Messages

Maybe you are looking for