Maximum package size?

What is the maximum allowable package size? Because when i try to install a 2.2 GB package i get this error:
loading package data... could not open package: File too large

you could always do it manually.
use a pkgbuild top create an empty pkg, (a pkg with nothing i it) using the correct details etc.
so u can be sure everythign will work, then extract .PK* files from it, place the game in a dir say pkgame then put the .PK* files in root of that directory.
then compress it. u should then have a valid pkg.

Similar Messages

  • Maximum package size for data packages was exceeded and Process terminated

    Hello Guru,
    When i am execute the process chain i got this message Maximum package size for data packages was exceeded and Process terminated,any body help to me in this case how can i proceed.
    Thanks & Regards,
    Suresh.

    Hi,
    When the load is not getiing processed due to huge volume of data, or more number of records per data packet, Please try the below option.
    1) Reduce the IDOC size to 8000 and number of data packets per IDOC as 10. This can be done in info package settings.
    2) Run the load only to PSA.
    3) Once the load is succesfull , then push the data to targets.
    In this way you can overcome this issue.
    You can also try RSCUSTV* where * is an integer to change data load settings.
    Change Datapackage size for extraction, use Transaction RSCUSTV6.
    Change Datapackage size when upload from an R/3 system, set this value in R/3 Customizing (SBIW -> General settings -> Control parameters for data transfer).
    IN R/3, T-Code SBIW --> Genaral settings --> Maintain Control Parameters for Data Transfer (source system specific)
    Hope this helps.
    Thanks,
    JituK

  • "Maximum package size for data packages was exceded".

    Hi,
    We are getting the below error.
    "Maximum package size for data packages was exceded".
    In our scenario we are loading the data product key wise (which is a semantic key as well) to the DSO thro’ a start routine.
    The logic in the start routine is such a way that it calculates the unique product counts , product key wise. Hence we are trying to
    group  the product key thro’ semantic groups.
    Ex: In this example the product counts should be A = 1,B=2 ,C = 1
      Product Key
      Products
      A
      1000100
      B
      2000100
      C
      3000100
      B
      2000300
      C
      3000100
    For some product keys the data is so huge that we could not load the data & we are getting the error.
    Please suggest any alternate way to  handle this thro’ code or introducing any other flow.
    Regards,
    Barla

    HI
    we can solve the issue by opening the system setting of data packer size
    like below we have create 2 programs, 1 for open the system settings,2 for
    close the settings .
    1 start program
    data: z_roidocprms like table of
    roidocprms.
    data: wa like line of z_roidocprms.
    wa-slogsys = 'system_client' . wa-maxsize = '50000'. wa-statfrqu = '10'.
    wa-maxprocs = '6'. wa-maxlines = '50000'.
    insert wa into table z_roidocprms.
    Modify roidocprms from table z_roidocprms .
    2 close program
    data: z_roidocprms like table of roidocprms.
    data: wa like line of z_roidocprms.
    wa-slogsys = 'syetm_client' . wa-maxsize = '50000'. wa-statfrqu = '10'.
    wa-maxprocs = '6'. wa-maxlines = '50000'.
    insert wa into table z_roidocprms.
    modify roidocprms from table z_roidocprms .
    data load infopakage settings we have to maintain like
    below
    we have create the process chain like as below
    1 start progarm
    data load infopakage
    2 close program.
    This might fix the problem.
    Regards,
    Polu.

  • Maximum package size for data packages was exceeded?

    Hi Experts,
    I am facing this problem "Maximum package size for data packages was exceeded". When I am trying to laod. I even tried to reduce data packet and change DTP settings in EXtraction to Get All New Data Request by Request but still same error is occuring. Can u Plz focus light on this.
    Thanks,
    Krishna

    You can refer to the below OSS note:
    Note 1144332 - Consulting note: Message RSBK 250: Package size exceeded
    And other related notes: 352038, 417307
    Hope this helps.
    Murali

  • Maximum Package Size and Duration for HD Streaming?

    Hey All,
    I've taken the HD plunge and am editing my first piece of video. I've finished and I want to export it to stream to my PS3 and/or Xbox. My question is what are the best settings for export to Quicktime MP4 1080 HD for maximum packet size and max packet duration?
    Also do I need to optimize for server if I will be streaming from my Time Capsule?
    I can successfully stream SD but I don't quite understand all this HD stuff so any and all help is appreciated.

    I totally appreciate the thread but my goal is not to copy the file but to get it to stream properly. Right now it stutters a bit during streaming. I am trying to find out if Max package and duration could help.
    I'm at 15KPBs on the download and 973 on the upload so it shouldn't be a network problem. I was just hoping someone could explain the max settings and recommend something for streaming

  • What is the maximum file size for CSV that Excel can open ? (Excel 2013 64bit)

    Hello,
    Before anyone jumps in, I am not talking about the maximum worksheet size of 1048576 rows by 16384 columns.
    I have  client whom has a 1.5 Gb CSV file, 1.9, 2.6, 5, 17 and 89 Gb file (Huge).
    If I open the 1.5 Gb, the file opens (After waiting 5 minutes) and then a warning pops up that only the first 1048576 rows have loaded. That is fair enough.
    If I try and open any of the others, Excel comes up to a blank worksheet. No errors. It just seems to ignore the file I tried to open. This happens from within Excel (File - open) or from double clicking the file in explorer.
    Excel goes to this blank page almost imeadiatly. It does not even try to open the file.
    If I try with Ms Access, I get a size warning and it refuses to load the file. (At least I get a warning)
    I would have expected Excel to load at least the first 1048576 rows  (If that is what there are in the file), and give an error.
    The computer is more than capable (Xeon processors, 16 Gb ram, SSD hard disks top of the line HP Z820 power workstation).
    With the 1.5 Gb file loaded to 1048576 rows, it uses 15% ram/pagefile. CPU's hit about 5%.
    I have confirmed it is Win 7 64bit, Excel 64bit. I am fairly confident we are over the file size but without an error message, I don't know what to tell my client whom is looking to me for answers.
    I have already discussed that the 89gb file in Excel is unreasonable and they are looking at a stat's package but I need an answer on these smaller files.
    Anyone got any ides ?
    Michael Jenkin (Mickyj) www.mickyj.com (Community website) - SBS MVP (2004 - 2008) *5 times Microsoft MVP award winner *Previously MacWorld Australia contributer *Previously APAC Vice Chairman Culminis (Pro IT User group support system)* APAC chairman GITCA
    *Director Business Technology Partners, Microsoft Small Business Specialist, SMB150 2012 Member

    Hi,
    The 1,048,576 rows & 16,384 columns is the
    workbook size limitation in Excel 2013. Thus, I recommend we try the Mr. Bernie's suggestions to import the large CSV file.
    1. Use VBA to read the file line by line and split/examine the import file in sections. If you have further question about the VBA, please post your question to the MSDN forum for Excel
    http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
    2. Use Excel 2013 add-ins. Power Pivot and Power Query. For more detailed information, please see the below articles: 
    http://social.technet.microsoft.com/Forums/en-US/9243a533-4575-4fd6-b93a-4b95d21d9b10/table-with-more-than-1-048-576-rows-in-power-query-excel-2013?fo
    http://www.microsofttrends.com/2014/02/09/how-much-data-can-powerpivot-really-manage-how-about-122-million-records/
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Thanks
    George Zhao
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click "[email protected]"

  • Set maximum upload size

    Hello,
    We are using Portal 7.0 and the CRM Business Package (BSP's).
    For a user it is possible to upload one or more attachments.
    Is it possible to set a maximum upload size?
    Greetings,
    Gene

    what version BES?
    I know BPS 4.1.4 does have an issue and you would need BES Express 5 to fix it. BES Express 5 is also free.
    order a copy here
    http://us.blackberry.com/business/software/besx.html
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Info on package size

    Hi,
    I would like to understand what does this setting means in infopackage
    Maximum size of a data packet in kByte = 50000?
    How do I determine what is the package size that is going to come from the source system? Is there any documentation or notes that tells what the suitable package size is?
    Number of data packets per Info-IDoc = 10
    How does records get divided per package? On what logic?
    I extracted the data into PSA.
    DP 1 = 8000 records
    DP2 = 9500
    DP3 = 8400.
    The number of records is not same in all the packages. How does it work?
    Thanks
    Annie

    The individual records are sent in packages of varying sizes in the data transfer to the Business Information Warehouse. Using these parameters you determine the maximum size of such a package and therefore how much of the main memory may be used for the creation of the data package.
    SAP recommends a data package size between 10 and 50 MB.
    if you transfer a lot of fields, you can transfer less lines...
    if you transfer less fields, you transfer more lines,...
    more info :
    http://help.sap.com/saphelp_nw70/helpdata/en/51/85d6cf842825469a51b9a666442339/content.htm
    M.

  • Data package size

    What is the basic difference between RSCUSTV6 & SBIW->General setting ->Maintain Control parameters in relation of modification of data package format.

    Hi,
    Just see the help on
    Maintain Control Parameters for Data Transfer:
    1. Source System
    Enter the logical system of your source client and assign the control parameters you selected to it.
    You can find further information on the source client in the source system by choosing the path
    Tools -> Administration -> Management -> Client Maintenance.
    2. Maximum Size of the Data Package
    When you transfer data into BW, the individual data records are sent in packages of variable size. You can use these parameters to control how large a typical data packet like this is.
    If no entry was maintained then the data is transferred with a default setting of 10,000 kBytes per data packet. The memory requirement not only depends on the settings of the data package, but also on the size of the transfer structure and the memory requirement of the relevant extractor.
    3. Maximum Number of Rows in a Data Package
    With large data packages, the memory requirement mainly depends on the number of data recrods that are transferred with this package. Using this parameter you control the maximum number of data records that the data package should contain.
    By default a maximum of 100,000 records are transferred per  data package.
    The maximum main memory requiremen per data package is approximately 2  Max. Rows 1000 Byte.
    4. Frequency
    The specified frequency determines the number of IDocs that an Info IDoc is to be sent to, or how many data IDocs an Info Idoc describes.
    Frequency 1 is set by default.. This means that an Info Idoc follows every data Idoc. In general, you should select a frequency between 5 and 10 but no higher than 20.
    The bigger the data IDoc packet, the lower the frequency setting should be. In this way, when you upload you can obtain information on the respective data loading in relatively short spans of time .
    With the help of every Info IDoc, you can check the BW monitor to see if there are any errors in the loading process. If there are none, then the traffic light in the monitor will be green. The Info IDocs contain information such as whether the respective data IDocs were uploaded correctly.
    5. Maximum number of parallel processes for the data transfer
    An entry in this field is only relevant from release 3.1I onwards.
    Enter a number larger than 0. The maximum number of parallel processes is set by default at 2. The ideal parameter selection depends on the configuration of the application server, which you use for transferring data.
    6. Background job target system
    Enter the name of the application server on which the extraction job is to be processed.
    To determine the name of the application server, choose
    Tools -> Administration -> Monitor -> System monitoring -> Server. The name of the application server is displayed in the column Computer.
    7. Maximum Number of Data Packages in a Delta Request
    With this parameter, you can restrict the number of data packages in a delta request or in the repetition of a delta request.
    Only use this restriction when you expect delta requests with a very high data volume, so that, despite sufficiently large data package sizes, more than 1000 data packages can result in a request.
    With an initial value or when the value is 0, there is no restriction. Only a value larger than 0 leads to a restriction in the number of data packages. For reasons of consistency, this number is not generally exactly adhered to. The actual restriction can, depending on how much the data is compressed in the qRFC queue , deviate from the given limit by up to 100.
    RSA6:
    Used to change the Datapacket Size.
    Thanks
    Reddy
    Edited by: Surendra Reddy on Mar 12, 2010 6:27 AM

  • Impact of Changing Data Package Size with DTP

    Hi All,
    We have delta dtp to load data from DSO to infocube. Default data package size with dtp is 50,000 records.
    Due to huge no of data, internal table memory space is used and data loading get fails.
    Then we changed the data package size to 10,000, which executes the data load successfully.
    DTP with package size of 50,000 took 40 minutes to execute and failed, but DTP with package size of 10,000 took 15 minutes (for same amount of data).
    Please find below my questions:
    Why a DTP with bigger size of packet runs longer than a DTP with lower packet size ?
    Also by reducing the standard data package size 50,000 to 10,000, will it impact any other data loading?
    Thanks

    Hi Sri,
    If your DTP is taking more time then check your transformation .
    1.Transformation with Routines always take more time so you if you want to reduce the time of execution then routine should be optimized for good performance .
    2.Also check if you have filter at DTP level .Due to filters DTP takes long time .If same data get filtered at routine level it take much lesser time .
    3.If you cannot change routine then you can set semantic keys at your DTP .The package data will be sorted as per semantic keys and thus it may be helpful at routine level for fast processing.
    4.Your routine is getting failed due to  internal table memory space so check if you have select statement in routine without FOR ALL ENTRIES IN RESULT_PACKAGE or SOURCE_PACKAGE line .if you will use this It will reduce record count .
    5.Wherever possible delete duplicate records and if possible filter useless data at start routine itself .
    6.Refresh internal table if data no longer needed .If your tables are global then data will be present at every routine level so refreshing will help to reduce size.
    7.The maximum memory that can be occupied by an internal table (including its internal administration) is 2 gigabytes. A more realistic figure is up to 500 megabytes.
    8.Also check no of jobs running that time .May be you have lots of jobs active at the same time so memory availability will be less and DTP may get failed .
    Why a DTP with bigger size of packet runs longer than a DTP with lower packet size ?
    *Start and end routine works at package level so routine run for each package one by one .By default package have sorted data based on keys (non unique keys (characteristics )of source or target) and by setting semantic keys you can change this order.So Package having more data will take more time in processing then package have lesser data .
    by reducing the standard data package size 50,000 to 10,000, will it impact any other data loading?
    It will only impact running of that load .but yes if lots of other loads are running simultaneously then server can allocate more space to them .So better before reducing package size just check whether it is helpful in routine performance (start and end ) or increasing overhead .
    Hope these points will be helpful .
    Regards,
    Jaya Tiwari

  • The initial heap size must be less than or equal to the maximum heap size.

    All,
    Please help!!
    I have tested my Application Client Project in WSAD on my pc and it works fine.
    I have 1gb RAM on my pc. When I deploy the same app on another xp pc(same as mine but 512mb RAM) I get a heap size error. Here is the exact error:
    Incompatible initial and maximum heap sizes specified:
    initial size: 268435456 bytes, maximum heap size: 267380736 bytes
    The initial heap size must be less than or equal to the maximum heap size.
    The default initial and maximum heap sizes are 4194304 and 267380736 bytes.
    Usage: java [-options] class [args...]
    (to execute a class)
    or java -jar [-options] jarfile [args...]
    (to execute a jar file)
    where options include:
    -cp -classpath <directories and zip/jar files separated by ;>
    set search path for application classes and resources
    -D<name>=<value>
    set a system property
    -verbose[:class|gc|jni]
    enable verbose output
    -version print product version
    -showversion print product version and continue
    -? -help print this help message
    -X print help on non-standard options
    Could not create the Java virtual machine.
    Press any key to continue . . .
    Here is the batch file that runs my app:
    @echo off
    SET appClientEar=C:\corp\apps\mts\jars\MTSClientEAR.ear
    set JVM_ARGS=-Xms256M -Xmx256M
    set CLIENT_PROPS=C:\corp\apps\mts\jars\medicalclient.properties
    set APP_ARGS=
    call C:\bnsf\IBM\WebSphere\AppClient\bin\launchClientBNSF.bat "%JVM_ARGS%" %appClientEar% "-CCpropfile=%CLIENT_PROPS%" %APP_ARGS%
    @pause
    I have changed the value of Xms and Xmx of JVM_ARGS to different size but I sitll get error. Anyone knows what the problem is. Thanks..

    Don't know why, but the "maximum heap size: 267380736 bytes" value is just slightly less than 256*1024*1024, wheras the reported initial size is equal to that.
    Try setting the initial value to 255MB.

  • Will it improve performance if PACKAGE SIZE added to a select query?

    Hi Gurus
    While doing the performance optimization I could see that in the code it is splitting the BKPF entries selected to a package of 500 and selecting from BSEG cluster table. In effect the remaining tables are also getting hit based on the no. of entries(packets) in the selected BKPF internal table.
    Cant we use the package size 500  in the select statement instead of this spliting and hiting the tables in a do loop.
    eg:-
          SELECT x  v z
            FROM bseg
            APPENDING TABLE lt_bseg
            PACKAGE SIZE 500
            FOR ALL ENTRIES IN lt_coep
            WHERE bukrs = lt_coep-bukrs
            AND   belnr = lt_coep-belnr_fi
            AND   gjahr = lt_coep-gjahr.
    When I read the keyword documentation I saw  a note in that as " If the addition PACKAGE SIZE is specified together with FOR ALL ENTRIES, it is not passed to the database system, but is applied to the result set on the application server, after all selected rows have been read"  I did not understand the meaning of this.
    So I am confused whether I can go ahead with this approach or will go along with the already used BKPF split logic and selct from BSEG and other tables in DO loop.
    Can you please help me << removed >>.
    Thanks & Regards,
    Shinimol.
    Edited by: Rob Burbank on Sep 23, 2010 9:09 AM

    Hi,
    regarding your second doubt:
    > Second doubt is on the note I saw in key word documentation. " If the addition PACKAGE SIZE is specified together with FOR ALL ENTRIES, it is not passed to the database system, but is applied to the result set on the application server, after all selected rows have been read.  "  I couldn't understnd this. When I debugged the select with F5 it was selecting 500 each  till it reaches th end.
    > So what does it mean, we can use this option or we should not use?
    the FAE does your select in pieces and collects the result in the database interface in an inermediate buffer and
    eliminates the duplicates there. AFTER this it gives you the number of rows back to your ABAP program that are specified with package size. It simply means that the package size addition has no effect on the memory consumptionfor the intermediate
    buffer in the database interface.
    Kind regards,
    Hermann

  • How to change font size, maximum column size in the result screen ?

    hi All
    That's great when using SQL Dev.
    But I also have a trouble that how to change font size, maximum column size in the result screen ?
    My users think that font in result screen is shown very small, and whenever the data in each colum is long then it's not shown full data in column, they must double click for extend the size. Have the option to default the max size for showing full data in each column ? I try but still not to do that .
    Appreciate for anyone to help us.
    Thanks all.
    Sigmasvn

    You can't change the font for the results screen yet, however you will be able to select an auto-fit option for selected columns, so if some columns have slitghtly wider text you'll be able to set the column widths to handle these wider columns.
    Also, there s the option of switching the layout of a record in the grid.
    Sue

  • Issue when number of records in a DSO exceeds DTP package size

    Hi all,
    I'm having a strange problem with the package size of my DTPs.
    I move data from a DSO to another one while performing some transformations in an Export routine. The DTP has a package size of 6 million records.
    When the number of records in the first DSO exceeds the package size, some of the records seem not to be processed properly by the transformation and this forces me to choose a very large number for the package size so that the ABAP code in the transformation is processed for all the records of the source DSO.
    I can't understand why this is happening because package size is only supposed to determine the number of records to be processed in a single step and nothing else.
    Am I right?
    Thanks

    My tip would also be the summary item

  • What is an idea of maximum file size for a film in Captivate?

    Hi there,
    I'm creating an elearning course in Captivate 7, and it is being published as HTML5. This means the films I've imported are being converted to MP4s, and they are around 10-20mb in size once they've converted. They seem very slow to load on some computers - do you think the file size is too big? Or could it be another issue? Does anyone have a recommendation for maximum file size for films? They are 572 x 322px and around 1-2 mins in length.
    Thanks in advance

    Probably better guidelines that dictates 'size' of a vi are:
    typically no more than 1 video screen in size
    is it legible
    and is it's function and operation clear.
    I have seen examples of '1 vi does it all' that were many screens wide and tall, totally a flustercuck, and nearly 1 MB in size.
    Globals and local variables (except for LV2 style) are typcially shunned for they can create a host of problems (race conditions, indeterminant data).
    Use connector pane to wire controls and indicators to. Then use wires between vi's to transfer data. I tend to use clusters to hold shared data.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~
    "It’s the questions that drive us.”
    ~~~~~~~~~~~~~~~~~~~~~~~~~~

Maybe you are looking for