Maximum Responsive Width

Hi,
I'm wondering how I can increase the responsive dimensions in Captivate 8. Right now the widest I can expand the largest (desktop) layout is 1280px. Is there a way I can increase that width?
Thanks in advance.

Not at this moment.

Similar Messages

J2me maximum response bytes size (http)

Hi,
i am developing a end to end application using j2me and servlets.
iam getting the response as xml from the servlet and parsing it in my j2me client.
i am getting error- if the total bytes return from the server exceeds..2000bytes.
is there any maximum incoming and outgoing messages bytes size for the j2me applications.iam connecting to the server thru http.
thanks,
RP

There is no official maximum, but some devices or networks may impose a maximum. In working with the Nokia 7210, for example, I found that large responses would either return an error from the WAP gateway or would cause intermittent IOExceptions on the phone. I ended up limiting the response size to 30000 bytes for the Nokia 7210.
With most devices, there is no maximum response size.
I have encountered a WAP gateway that required the response to a Nokia 6310i to be less than 2800 bytes, but I don't think a gateway like this would be encountered much by real users since it essentially kills over-the-air provisioning.
If you're getting an error with the J2ME Wireless Toolkit or a device that doesn't limit the response size, then it's probably a bug in your code. I frequently see developers fail to realize that InputStream.read(byte[] b) may return before reading b.length bytes; an error like this would result in the symptoms you're seeing.

Maximum panel width

Hi,
I'm using CVI 2012, and I have a question about the maximum width of a panel.
I have created a panel on the user interface editor of 3840 pixel width, but when I run my application, the displayed width of the panel seem to be 3350 pixel (and the rest is cropped).
Even if I try to enlarge the panel with mouse the limit remaining.
There is a way to pass this limit ?
Thanks for your precious support.
Solved!
Go to Solution.

Hi Wolfgang,
Thanks for your reply.
I did as you suggested:
"GetPanelAttribute" get 3344 pixel width (the portion of panel displayed), and SetPanelAttribute (panel, ATTR_WIDTH, 10000) return 0 (non errors), but the portion of panel displayed remain unchanged.
You do not need a large display to run the test.
Attached the code
Thanks again
Attachments:
MaxWidth.zip ‏283 KB

Maximum Line Width when Report is running in background

Hello Experts,
I have written a ABAP program and user is running in background. My output is of width of 599 characters. But wehn the user is running in the background, it is showing a warning that last 345 columns won't be displayed.
What is the maximum width, that is allowed for report being displayed in background.
Kindly help and points will be rewarded. its really urgent.
Thanks in advance.
Thanks and Regards,
Saurabh

Hey Saurabh,
I am facing the same problem. I have a report which has 406 characters. It is displayed correctly when executed in foreground but only 255 characters when executed in background.
You have resolved this issue. Can you please provide me the solution to execute it in background and get the complete output.
Regards,
Anosh

How to define maximum field width on an updatable report

I have an updatable report.
From a user's perspective, this is a form in my app. How can I define the maximum number of characters the user can enter into a field?
I tried entering the following into the report column's element attributes, but none of these worked:
width=10px
width:10px
max-width=10px
max-width:10px
I don't know why the Tabular Form Element section allows to define Element Width and Number of Rows, but not the maximum width.
Thanks
Boris

Hi Boris,
If your updateable report is created by using a wizard than its not.
You could use the apex_item.text api which allows for setting the max field width.
Jos

Maximum Stage Width

I built a video player w/ fullscreen mode. I just upgraded my
moniter to a 30" and when I tested the video player my bg_mc did
not scale the total width of the screen. I then checked youtube,
revver, dailymotion, ect. All had the same behavior. I tried adding
1000 pixels to the Stage width and it had no affect.
Why is the max Stage.width smaller then consumer monitor
resolutions?
What is the max width for a single mc?
When is this going to be corrected?

This is a peer-to-peer forum, and by no means official
support. Please
Contact Adobe for
official support.

Ultiboard maximum trace width. Cant resolve Problem

Hi,
I have the following problem.
I tried to design a Atenna (just a normal trace) with a thickness of 1.5mm. Since my Design Rules only allow 1.0mm, I changed them to 1.6mm. Ultiboard seems to refuse these settings since it still says:
Design rule error: The object "Trace: Net(3); Clearance(0.150000 mm); Width(1.500000 mm); Layer(Copper Top)" has a width BIGGER than allowed by the net settings.
Im using Ultiboard 13
regards
Attachments:
Ultiboard.png ‏80 KB

Hi there,
There is another way to change the trace width. In the Spreadsheet View, Select your Net (3), you can see it's Max, Min and Trace width. You can modify them here.
Hope it helps!
Regards,
Chen_T
National Instruments

ADJUSTING MAXIMUM PIXEL WIDTH

I would sure like to use Lightroom for Panoramas. If there is any
way that the maximum limit could be based on file size rather than
the number of pixels along one side, it would be very helpful

Dude that request has already been posted please post here:
http://www.adobeforums.com/cgi-bin/webx/.3bc46478/0

How can I find the full width at half-maximum?

Hello,
I have run into a problem that I hope you can help me with: I need to find the Full Width at Half-Maximum.
I have an array of pixel intensities and have found the peaks and valleys using Peak Detector.vi, but I can not figure out a way to find the full width at half-maximum (the width of the 'hill' at one-half of its maximum point).
Any help you may provide would be greatly appreciated.
Jared Leisner
- Using LabVIEW 6.1/Vision 6.0

Jared,
I had the same problem. One of the solutions I used was to use the was to
use "threshold 1D array.vi" from the array palette. You can use this to
iteratively get the uphill edge of the peak. To get the down hill edge, you
have to invert the array and then use the same VI. Then subract the uphil
position from the down hill position and your done.
You do however need to be careful depending on your image content. If the
image is noisy, then the "Peak Detector.vi" will have problems finding the
"real peak".
Steven Bloomberg
CISTech
"Jared Leisner" wrote in message
news:[email protected]..
> Hello,
>
> I have run into a problem that I hope you can help me with: I need
> to find the Full Width at
Half-Maximum.
> I have an array of pixel intensities and have found the peaks and
> valleys using Peak Detector.vi, but I can not figure out a way to find
> the full width at half-maximum (the width of the 'hill' at one-half of
> its maximum point).
> Any help you may provide would be greatly appreciated.
>
> Jared Leisner
> - Using LabVIEW 6.1/Vision 6.0

DW CC Fluid grid layout how to change px width for desktop layout

Hi there,
I have been going through the various tutorials about fluid grid layout and setting up our bureau's website in a responsive layout.
The width of the original design was 960 px and the hero pic and others have been exported at that size.
The first divs in the design look fine, header with the 960 px pic in it, and also the BC menu which is set to 960 wide.
However the body text goes out to the right, past the 960 px and this is because, right at the start, when starting the file in DW the desktop screen width is set to 1232px.
How can you change this setting when starting a new fluid grid layout?
I have tried changing the number of columns, or the percentage, and the width for desktop remains at 1232px.
Why is this?
Not all of our clients want a site 1232px wide on a pc.
Thanks so much.

Hi Ben and Nancy,
Thanks for your replies, but maybe you both don't realise I am asking specifically about DW CC and setting up a responsive design using a fluid grid layout?
I have been following the recent videos from Adobe on this.
As far as the width of 960 goes, Nancy I am only shortchanging myself, as this is the website for our agency. The original design is 960px wide as I did read somewhere that this width is recommended now that responsive is coming, as it is easily divided into a grid layout. I also am quoting for a client at the moment who wants a responsive design for their website, and they have specifically requested that the site have a maximum width of 960 px. So I would like to find out if this is possible in DW CC at the moment when doing a fluid grid layout.
So what I am trying to do here is follow the Adobe tutorials on responsive design, using DW CC and I am using the current design for our agency website as a trial to set this up and try and get it working as a responsive website.
It does not seem to me that many other people are doing this, as most people are recommending that I try Github or Bootstrap.
However, I am not a coder and I am used to using DW, so I would like to get the DW CC responsive design features working if possible.
Ben the CSS you are looking at is being generated by DW CC as I follow the steps in the Adobe demonstration videos to set up a fluid grid layout in DW CC.
One of the things they say in the videos is that you can't program the CSS directly when doing a fluid grid layout, or you break the CSS and it all stops working. So I am using the new panels in DW CC to set up the layout. One thing I cannot get access to is the ability to set a maximum width for the site. It seems to be set in concrete when you start the fluid design up in DW CC.
Here is a pic of the screen I am talking about that sets the maximum width:
I cannot click in the pixel width at the top and change it. Also if I adjust the number of gridlines or the percentage for the pc layout, the default maximum pixel width does not change.
If you click on the preferences button and go into the Window sizes screen, there does not seem to be a way to set the maximum pc width here either, so I am a bit stumped.
Maybe I just have say to my clients that if you want a responsive design then the max width for pc can only be 1232px? It does seem strange to me that this cannot be changed.

Optimizing Table Control Width

Hello,
I have used the Table Maintenance Generator to build the relevant screens for displaying/ editing data from 2 tables.
However when i maintain this view in SM30 it displays the table control with horizontal scroll bars. There are about 22 columns in the view and I would like to see them all in one screen.
I have tried changing the <i>Lgth</i> attribute of the Table Control from SE51. It shows 83. While trying to change it to about 140 I get an error message saying that 140 exceeds maximum width of 83.
Is 83 the maximum possible width for a table control? How can I change it?
Please respond with your quick tips!!!
Regards,
Priya

Thanks so much Ravi. Your tip proved very useful. The screen size set by an earlier developer had got reset when I did a re-run of the Table Maintenance Generator. I overlooked this small but important detail.
Thanks once again for the prompt response. It helped me resolve an urgent issue.

Question about the Cluster and Column width in Graphs in Illustrator CS2

How do they relate to each other? How do the Percentages work together? Is there any information about how you can mathematically figure how much area each Cluster width takes. If you make a graph and make both the cluster and column widths 100%, the entire area is filled. If you make the Column width 50% the bar will sit exactly in the center of the Cluster width, but if you make the cluster width 75%, the bars move closer together.

Gregg,
The set of bars that represent each row of data in the graph spreadsheet is called a "cluster".
Let's let
   W = the width of the whole area inside the graph axes
   R = the number of rows of data
   C = the number of columns of data
Then the maximum potential space to use for each row of data is W/R. The cluster width controls how much of this potential space is assigned to each row. This cluster space is then divided by C, giving the maximum potential width of each bar. The maximum potential width for each bar is then multiplied by the column width percentage to get the actual width of each bar.
So the actual width of each bar is ((W/R)*Cluster width)/C)*Column width
The graphs illustrated below have three rows of data, with two columns each. The solid colored areas in the background have the same cluster width as the main graph, but they all have a column width of 100%. This lets you see more easily how the gradient bars that have a column width of 80% are using up 80% of their potential width.
Notice that as the Cluster percentage gets lower, the group of bars that represent a row of data get farther apart, so that you can more easily see the "clumping" of rows. When the Cluster percentage is 100%, the columns within each row are no closer to each other than they are to the columns in other rows.
As the Column percentage gets lower, the bars for each data value occupy less of the space within their row's cluster, so that spaces appear between every bar, even in the same row.

Query Tuning - Response time Statistics collection

Our Application is Load tested for a period of 1 hour with peak load.
For this specific period of time, say thousands of queries gets executed in the database,
What we need is say for one particular query " select XYZ from ABC" within this span of 1 hour, we need statistics like
Number of times Executed
Average Response time
Maximum response time
minimum response time
90th percentile response time ( sorted in ascending order, 90th percentile guy)
All these statistics are possible if i can get all the response times for that particular query for that period of 1 hour....
I tried using sql trace and TKPROF but unable to get all these statistics...
Application uses connection pooling, so connections are taken as and when needed...
Any thoughts on this?
Appreciate your help.

I don't think v$sqlarea can help me out with the exact stats i needed, but certainly it has lot of other stats to take. B/w there is no dictionary view called v$sqlstats.
There are other applications which share the same database where i am trying to capture for my application, so flushing cache which currently has 30K rows is not feasible solution.
Any more thoughts on this?

Hi ,Maximum line size in the report

What is the maximum line size inthe report.Some are saying 1023.Some are saying 255 characters.I am full confusing this concept.
And if the line size mentiones in less than the length of the data in the write statement ,what happened?
Sometimes it is coming in the next line , sometimes it is coming in the next line
Please anyone provide the solutin

hi,
The line width determines the number of characters in the line buffer as well as the number of columns in the list displayed. The value width must be a positive numeric literal. The maximum line width is 1,023 characters.
When the LINE-SIZE is not specified, the line width of the basic list is set to a standard width based on the window width of the current Dynpro, but is at least as wide as a standard size SAP window. For the standard width, the contents of sy-linsz is 0. The LINE-SIZE overwrites the value of the like-named LINE-SIZE addition to the statement SUBMIT and can be overwritten during list creation with the like-named LINE-SIZE addition to the statement NEW-PAGE.
For screen lists, you should use the standard value since, as a rule, page breaks defaulted through LINE-COUNT are not adjusted to the window size.
You should also use the standard value for print lists, so that you can still select the page size on a printer-specific basis. A print list should be created in such a way so that it can handle every page size.
Specifying a fixed line count is only useful for form-type lists with a fixed page layout. Here, however, you should always check whether such forms can be created by other means, such as SAPScript forms.
when line size is more than your data... your ouput screen will be dragging after all your output display..So bettery ou should use the standard value .
Regards,
Muhammed Safel

Page Width in INDESIGN

Hi,
I'm trying to create a banner in Indesign but I need to excede the maximum page width of 5486mm...is there a way of pasting 2 pages together? It's to make a PDF...
Thanks!

Scale it down and keep in mind that PDF has a limit of 200 inches (which
is less than InDesign 216 inches). I'm in the middle of a project like
that myself and I'm using a 25% scale for the graphics.
Bob

Maximum Responsive Width

Similar Messages

Maybe you are looking for