Maxl : ASO Filters and users

Hi,
I will like to create a MaxL script that will list all the users/groups and the filters assigned to each of them.
I'm planning to use the following commands, but I can't find the command that will help me link the user (or group) to his assigned filter.
display filter row on database app.db;
display user username;
Could some one help?
FYi, I'm using essbase 7.1 and ASO cube
Thanks

Just to close this issue:
The command to use will be "display privilege"
:)

Similar Messages

  • How to create secutiry filters and users, groups in system 9

    HI,
    Could you please help me how to create security filters and groups, users in system 9. I need it very ugent. i am very much thankful to you.. if you respond immediatly.
    Thanks,
    sudhakar.

    In short here's how I did it in 9.3.1 but there are multiple ways to do it.
    I'm using MSAD external authentication.
    Using EAS right click on database, Edit, Filters. Create your filters.
    Then go to Shared Services.
    Find the MSAD user/group and provision them to the Essbase database that you have your filters on. Access level is "Filter".
    Then go back to EAS and Refresh Security From Shared Services.
    Then go back to Shared Services.
    Navigate to Projects & then your Essbase server. Find your Essbase database and click on it. To the right it'll populate a list of all the users/groups you provisioned to above. Select all of them and click Next.
    Now you should see a drop down at the top showing your filter(s). Click the checkbox(s) next to the users/groups you want to apply that filter to. Click the green checkmark to apply the filter, and repeat for your various filters that you want to apply. Only 1 filter per user/group.
    Then go back to EAS and Refresh Security From Shared Services again.
    Good luck, hope this helps.

  • Excel Services and User Specific Data

    Hello,
    I am new to Excel Services.
    I want to retrieve data to Excel Services (at this phase, to prevent it in Excel Web Part) from SQL Server.
    The SQL might hold big amount of data so I think about fetching only the data relevant to each user.
    I configured a pivot table over a data connection with Windows Authentication, and when I refresh it I get the following message "The data connection uses windows authentication and user credentials could not be delegated". I think the Windows
    Authentication is required in order to pass information about the user to the SQL query so it can filter for the relevant data.
    My questions are as follows:
     Can I pass user information from the Excel model file to the SQL server in a way different from Windows Authentication?
    Alternatively, if I retrieve the data unfiltered to Excel Services, and filter only the pivot, will I get the same performance?
    Would the answers change if Excel and/or SharePoint version is changed from 2010 to 2013 or Online/365?
    Any other idea?
    Regards,
    Barak

    Hi,
    According to your post, my understanding is that you wanted to filter Excel Services Data.
    You can you can connect the Excel Web Access Web Part to a Current User Web Part or a Filter Web Part to pass user information. Please refer to:
    Personalized Data in Excel Services
    You will get the same performance.
    You can connect the Excel Web Access Web Part to a Current User Web Part in all versions.
    More information:
    Connecting Dashboard Filters to Excel Services Pivot Table Report Filters
    Thanks,
    Linda Li                
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Linda Li
    TechNet Community Support

  • IIR Filtering and response .vi: Butterwort​h filter magnitude response depends on sampling rate -why?

    Hi folks,
    I am not expert in filter design, only someone applying them, so please can someone help me with an explanation?
    I need to filter very low-frequent signals using a buttherwoth filter 2. or 3. order as bandpass 0.1 to 10 Hz .
    Very relevant amplitudes are BELOW 1 Hz, often below 0.5 Hz but there will be as well relevant amplitudes above 5 Hz to be observed.
    This is fixed and prescribed for the application.
    However, the sampling rate of the measurement system is not prescribed. It may be between say between 30 and 2000 Hz. This will depend on whether the same data set is used for analysing higher frequencies up to 1000 Hz of the same measurement or this is not done by the user and he chooses a lower sampling rate to reduce the file sizes, especially when measuring for longer periods of several weeks.
    To compare the 2nd and 3rd order's magnitude response of the filter I used the example IIR Filtering and response .vi:
    I was very astonished when I the found that the magnitude response is significantly influenced by the SAMPLING RATE I tell the signal generator in this example vi.
    Can you please tell me why - and especially why the 3rd order filter will be worse for the low frequency parts below 1 Hz of the signal. I was told by people experienced with filters that the 3rd oder will distort less the amplitudes which is not at all true for my relevant frequencies below 1 Hz.  
    In the attached png you see 4 screenshots for 2 or 3 order and sampling rate 300 or 1000 Hz to show you the varying magnitude responses without opening labview.
    THANK YOU for your ANSWERS!!!
    chris
    Solved!
    Go to Solution.
    Attachments:
    butterworth-filter-differences.png ‏285 KB

    Hello Lynn,
    thanks for the answer. You are right that there are few points "behind" the curve in the graph, see png.
    However, this is the filter response which Labview (2009) provides to me directly out of the "IIR Filter for 1 Channel. vi" in the "filter information" output cluster. Where up to now I do not know how to influence it - apart from adjusting the input parameters "IIR filter specifications". OK, I assume I have to gain more knowledge of this. The curve of the magnitude resonse dies not change when I change the number of samples of the input signal of the signal generator, only wehn I change the sampling rate.
    I used directly the example vi from Labview with the name indicated in my first post "IIR Filtering and Response.vi".
    So I assumed that everybody has it in his/her examples shipped with LV and it is not necessary to post it.
    I just adjusted the size of the diagram of magnitude response to see the curves better as you see in the attached vi.
    So I did no changes to the vital parts of signal generation and filter of the example. The screenshots are like they come from the example when using the option "one waveform" where I as user assume that this which is behind is quality-controlled by NI.
    I was also astonished that the filter magnitude response is different to the one I copied out of graphs 1 year ago - but I unfortunately cannot reconstruct which example I used there...
    Thanks for any further comments
    chris
    Attachments:
    IIR Filtering and Response_CH.vi ‏55 KB
    butterworth2nd_order_bandpass_0p1to10Hz_mag_response.PNG ‏18 KB

  • Transferring Email Filters and Other Settings to a New BB Device

    I will be upgrading/replacing the BB device of one of my users. He's got a lot of email filters and personal setting preferences (i.e. ring tones, speed dial,etc.) Can I transfer the settings and filters to his new BB?
    I tried transferring it through the BB Desktop Mgr > Device Switch Wizard but it messed up the Messages/Corporate Email. After syncing the device with the BES he got double copy of the emails that are currently in his Inbox.
    Thanks in advance!
    Solved!
    Go to Solution.

    You can do a Backup of the old, and then a selective restore from the backup to the new device...
    DM > Backup/Restore > Advanced.
    Select only those preference databases you desire (i.e., Address Book preferences, Speed Dial, etc.).
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Adding commentary in ASO Cube and aggregating it to TOP Level

    Hi Gurus,
    I have one peculiar problem. We are adding commentary in BSO Planning cube now i have couple of problem related to it.
    a) These commentary needs to be pushed in ASO cube (Reporting) which need are entered in Lower Level.
    b) At top level these commentaried need to be Aggregated or rather Concatenated.
    eg.
    ProfitCentre has two child P1 and P2 and user enter commantary in BSO for P1 and P2 as "Market Risk Deviation" and "Standard Output"
    then in the HSPgetval Smartview report the conent of report will look like:
    Profit Centre          Market Risk Deviation + Standard Output
    P1                        Market Risk Deviation
    P2                        Standard Output.
    Any thoughts/ Suggestions/ Input/ Ways to achieve so
    Thanks
    Anubhav

    Apart from what Glenn suggested
    Not out of box, you are looking at a JAVA API + SQL based solution here
    Here are my thoughts
    Either use a Select query and get the Text values and IDs from the tables HSP_CELL_TEXT (or HSP_TEXT_CELL) table
    Create a Java API, which can import a TextList in ASO cube, ID is going to be what you get from the table
    Load the data to ASO from Planning
    Now for the aggregation/concatenation part, you'll have to Add those as again Smart List, This can be done by looking at HSP_CELL_TEXT (or HSP_TEXT_CELL) table, there is an ID associated with each text, get the id associated
    So for example Market Risk Deviation is 1 and Standard Output Deivation is 2, then you should add Market Risk Deviation + Standard Output as 3, however you'll have to make sure that there is no entry from Planning for 3
    It is complicated
    Regards
    Celvin Kattookaran

  • Why can't i access filters and motion for nested composition

    i expect to be able to treat a nested composition just like a clip and double click it to access the filters and motion tabs. instead i get kicked back to the original composition. not what i would expect from reading the help section on nested compositions.
    thanks!
    (first time forum user -- not sure how to find reply -- send to <Edited out by hosts for your protection> if you wouldn't mind)

    i expect to be able to treat a nested composition just like a clip and double click it to access the filters and motion tabs.
    then you expect wrong! double-clicking an item "opens" that item ... so if you double click a "clip" then it opens into the viewer, but if you double-click a "nest" then it opens into the timeline
    you can access the filters and motion tabs for that "clip" by selecting it in the timeline (single click) and then pressing Enter (or Return), or by dragging it from the timeline and dropping it onto the viewer window.
    ps welcome to the forum, Inga ... if you can handle the complexities of FCP then I'm pretty sure you can figure out this forum!

  • ASO Time and Periods combined - Dynamic Time Series?

    I am looking to do period-to-date calculations in ASO using the method outlined by Gary Crisci but I have Time and Periods combined into one heirarchy.
    I have seen suggestions that this can be done, but I cannot find any example code for the calculations.
    My MDX skills are not up to the challange yet so I was hoping someone is doing this and could shed some light.
    I am exploring the options of hard-coded alternate heirarchies, but data is stored at the day level and users want
    the same capability they have in BSO.
    Thanks,
    Kenneth

    You can create the calculated members within the existing time dimension, but it get ugly and probably won't perform great. For starters you will have to create a calculated member with a formula for every stored time member you have. Not too bad for 12 months, but if you ahve years and months in same dim or daily model, its not realistic. That is the beauty of View dimension, a single formula goes a long way.
    Other option is to not have alternate roll-ups in time dim - perhaps you can use Attribute dims to simulate the alternate groupings you need.

  • Assign Filters to User/ Group In System 9

    <p>Hi,</p><p>Does anyone know how to assign filters to user/ group in System9.</p><p> </p><p>I know that you have to create filters at the database level andassign security filter security from shared Services. The step I ammissing is where do you assign filter (i.e. ReadAcctFilter<<filtername>> to Accounting <<User/groupname>></p><p> </p><p>thanks,<br></p>

    assign filters in the shared services, <BR> under the analytic server to the user...<BR><BR>procedure would be look for the user in the particular domain,<BR>and assign the user provisioning and the filter also..<BR><BR>I hope you got it.

  • Web dynpro abap applications in filtering and sorting in tables

    Anyone can send me some simple applications based on
    webdynpro abap filtering and sorting concepts in tables....

    >
    cranjith kumar wrote:
    > Anyone can send me some simple applications based on
    > webdynpro abap filtering and sorting concepts in tables....
    First of why not use the ALV Component.  It has built in filtering and sorting so that you don't have to program those aspects.  It also has a nice UI for letting the user design the sorting and filtering that they want. 
    If you need sorting and filtering in the table UI element instead, you don't need anyone to send you sample applications. There are already some in your system.  Have a look at the component WDR_TEST_SORT_TAB_PROP.  Also have a look at the documentation on table events:
    [http://help.sap.com/saphelp_nw70/helpdata/EN/2d/390e422dfcde2ce10000000a1550b0/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/EN/2d/390e422dfcde2ce10000000a1550b0/frameset.htm]

  • My 3GS will not accept my correct password and user name to start using the Cloud.  It just spins while "verifying."

    My 3GS will not accept my correct password and user name to start using the Cloud.  It just spins while "verifying." How can I make it stop so I can activate iCloud ?

    try using @me.com instead of your service address, i mean hotmail or yahoo or else, thanks.

  • Diff b/w "Customer exits" and "User-exit"

    Hi,
    What is the difference b/w customer exits and user-exit and also please explain me what are the various types of customer and user-exits.
    Thanks in advance.
    Ramana

    Hi,
    Types of Exits
    There are several different types of customer exits. Each of these exits acts as hooks where you can attach or "hang" your own add-ons.
    Menu Exits
    Menu exits add items to the pulldown menus in standard SAP applications. You can use these menu items to call up your own screens or to trigger entire add-on applications.
    SAP creates menu exits by defining special menu items in the Menu Painter. These special entries have function codes that begin with "+" (a plus sign). You specify the menu item’s text when activating the item in an add-on project.
    Screen Exits
    Screen exits add fields to screens in R/3 applications. SAP creates screen exits by placing special subscreen areas on a standard R/3 screen and calling a customer subscreen from the standard screen’s flow logic.
    Function Module Exits
    Function module exits add functions to R/3 applications. Function module exits play a role in both menu and screen exits. When you add a new menu item to a standard pulldown menu, you use a function module exit to define the actions that should take place once your menu is activated. Function module exits also control the data flow between standard programs and screen exit fields.
    SAP application developers create function module exits by writing calls to customer functions into the source code of standard R/3 programs. These calls have the following syntax: CALL CUSTOMER-FUNCTION ‘001’.
    <b>User exits:</b>
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/abap-code-samples/userexits%20in%20a%20transaction.doc
    In order to find out the user exits for any tcode,
    1. get the developement class of the tcode from SE93.
    2. Now goto transaction SMOD and press F4,
    3. give in the Deve class in the dev class and Press ENTER
    this will show u the exits for any tcode.
    or execute this report
    http://www.erpgenie.com/sap/abap/code/abap26.htm
    which gives the list of exits for a tcode
    http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
    For information on Exits, check these links
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
    http://www.easymarketplace.de/userexit.php
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
    Check out these links too...
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    http://www.planetsap.com/userexit_main_page.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    USER EXITS
    https://forums.sdn.sap.com/click.jspa?searchID=672084&messageID=312792
    https://forums.sdn.sap.com/click.jspa?searchID=672084&messageID=1320078
    https://forums.sdn.sap.com/click.jspa?searchID=672084&messageID=2669896
    ****Reward points if helpful.
    All the best

  • Firefox has remberd a password to a website ... chessatwork and I get loged in to my main page and when I click on any link it takes me right back to my log in page, where it has it stored.... password and user name,,, whats up and how do I turn that off?

    Firefox has remberd a password to a website ... chessatwork and I get loged in to my main page and when I click on any link it takes me right back to my log in page, where it has it stored.... password and user name,,, whats up and how do I turn that off? chessatwork has ran great for me for many yrs, then one day I down loaded firefox and went to play chess on this site chessatwork.com, well the window popped up asking to remember the log in and pass word and so I said ok, and it did, but now when I click log in and I go to my main page (home) and click on any link, say to play game I return right back to log in

    See http://kb.mozillazine.org/Deleting_autocomplete_entries<br />
    Remove a saved password here: Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
    You may also need to remove the cookies from that website.<br />
    * Tools > Options > Privacy > Cookies: "Show Cookies"

  • How to get system status and user status of service order

    Hi,
    I want to show user status and system status for service order in my report and i am using CRM_ORDER_READ function module to read the status, but it is returning lot of status records, could anyone please suggest how to get the system status and user status for service order.
    I did not find any clue for how to get user status, i can see the user status when i open the transaction using CRMD_ORDER.
    Regards,
    Kamesh Bathla

    Hi,
      Go to CRM_JEST table give your service order guid and get the status, pass this status into TJ02. You will get the status of your order.
    Regards
    Srinu

  • How can I locate my lost iPod Touch if my location was off and user ID was changed?

    I lost 3 Apple devices during house break in. How can I locate my lost Apple devices if my location was turn off,
    without "Find My Phone" apps and user ID was changed. The 3 devices are iPod Touch, iPad 2 and iPhone 3gs.
    I had made a Police Report and was told that I can request to get information to track my devices upon WIFI or
    internet connection. I hope "APPLE" team will help me to track my devices with IP locations, GPS, built in compass,
    or quickly send directions, updated informations and mobile data to find out and coordinates them.
    Given point will also help the police to capture them.
    Awaiting your reply.
    Thank you. Rgd,
    Sean Khor
    <Personal Information Edited by Host>

    There is no Apple here, just users like you and me. Apple does not provide nor have that information, as far as I know, but if police needs that information, they have a legal way of contacting Apple. If I were you I would avoid trusting Internet forum, assessable by anyone with your personal information.

Maybe you are looking for