MBP battery "Not Charging" after RAM upgrade

I brought my MBP into an apple store for the genius bar to install a 4g RAM upgrade, after i got it back it will not run on battery power. Its plugged in with green light on power adapter and battery indicates (0%) (Not Charging). Please help. My battery worked fine before bringing it into the apple store.
Thanks.

Welcome to Apple Discussions!
This sounds like the RAM installed was either not to spec, faulty, or the installer missed a step. Take it back to the store and indicate to them what happened.

Similar Messages

  • Battery not recognised after ram upgrade - Help!

    I just attempted a Ram memory upgrade that worked fine, but my battery stopped being recognised.
    The battery was fine before, even so -  I bought a new one (I tested in a different computer - it worked there) - still doesn`t work.
    I decided to put back the old RAM - still no working Battery.
    Reseted the SMC and the NVRAM 500 times and nothing changes.
    Already have the latest Firmware (Efi and SMC) for quite a long time, can`t reinstall it or downgrade it  (due to apple.). Apparently CD firmware restauration not available to my model ( original installation cd don`t work beacuse it is  a previous version of firmware?)
    What else can I do?
    Is there any way to force a firmware installation ?
    Macbook Pro 13`` (8.1- early 2011)
    I7 -2.7ghz
    8gb
    500gb
    OSX Mavericks

    Run an Apple Hardware Test:
    http://support.apple.com/en-us/HT201257
    Note an error free AHT is not definitive.
    Check the connections on the MBP and the charger for dirt, debris and discoloration.  The pins on the charger are spring loaded and should move freely.
    Ciao.

  • Battery not charging after upgrade to 10.4.9

    Ever since I did the last system update, my battery is not charging.
    My light is yellow, and the indicator in the menu bar states that I am connected to AC.
    The charger is warm, the battery is cool to the touch, and has a single indicator light illuminated.
    This is the original battery, but has always charged (albeit, it only lasted about 20 minutes).
    I suspect that the system upgrade may be a factor.
    Any thoughts?
    Thanks,
    Boris

    NewerTech's batteries offer the highest capacity and thus the longest working time on a charge. You pay a premium for the extra oomph.
    I haven't seen any preponderance of enthusiastic messages posted here about any particular brand or vendor. You certainly don't need to spend $120; new Tibook batteries are advertised as low as $80-90 by some vendors. I've never bought from any of the following, but they may be worth a look or call:
    http://www.expercom.com/productdetail.html?PRODUCTID=295232
    http://www.atbatt.com/product/5675.asp
    http://www.academicsuperstore.com/market/marketdisp.html?PartNo=759446
    Price comparison site:
    http://www.nextag.com/apple-titanium-g4-powerbook-battery/search-html
    For other options, Google "Powerbook G4 Titanium battery".

  • Battery Not Charging after 10.6.8 Update (Macbook Pro 13' i5 2011)

    Hi,
    I own a 4 months old Macbook Pro 13in with i5 processor. I was using it normally until yesterday, when a software update prompting for enhancements on thunderbolt drivers and some stuff regarding OS X Lion was displayed. I started the software update, let the macbook plugged in and went to sleep.
    Today I found out that my battery is not charging anymore (when plugged in, the magsafe led lights green and the energy saver displays Not Charging). I've already tried to restart SMC to no result(unplugged, waited for 15 sec, plugged again and after 5 sec turned it on).
    Basically, my macbook is now useless. I use it mainly in the college, cant have it always plugged in and my second half classes start tomorrow!
    I dont have a time machine backup.
    I dont want to open the macbook since its still under warranty. What should I do?
    The system profiler info can be found below:
    Hardware Overview:
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro8,1
      Processor Name:          Intel Core i5
      Processor Speed:          2.3 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache (per Core):          256 KB
      L3 Cache:          3 MB
      Memory:          4 GB
      Boot ROM Version:          MBP81.0047.B0E
      SMC Version (system):          1.68f96
      Serial Number (system):          C02FFNFLDH2G
      Hardware UUID:          5C7658AB-7D4A-5731-A54F-8FC8ABCDA88C
      Sudden Motion Sensor:
      State:          Enabled
    Power On Self-Test:
      Last Run:          7/31/11 3:01 PM
      Result:          Passed
    Battery Information:
      Model Information:
      Serial Number:          W010858B9D3BA
      Manufacturer:          SMP
      Device Name:          bq20z451
      Pack Lot Code:          0000
      PCB Lot Code:          0000
      Firmware Version:          0201
      Hardware Revision:          000a
      Cell Revision:          0158
      Charge Information:
      Charge Remaining (mAh):          131
      Fully Charged:          No
      Charging:          No
      Full Charge Capacity (mAh):          5542
      Health Information:
      Cycle Count:          33
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          0
      Voltage (mV):          10987
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):          0
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          30
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Wake on LAN:          Yes
      Current Power Source:          Yes
      Display Sleep Uses Dim:          Yes
      Battery Power:
      System Sleep Timer (Minutes):          30
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          15
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Display Sleep Uses Dim:          Yes
      Reduce Brightness:          Yes
    Hardware Configuration:
      UPS Installed:          No
    AC Charger Information:
      Connected:          Yes
      ID:          0x0100
      Wattage (W):          60
      Revision:          0x0000
      Family:          0x00ba
      Serial Number:          0x00130284
      Charging:          No

    Did you follow these steps, EXACTLY?
    http://support.apple.com/kb/ht3964
    Note: Learn about removing the battery on MacBook and MacBook Pro.
    Shut down the computer.
    Disconnect the MagSafe power adapter from the computer, if it's connected.
    Remove the battery.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Reconnect the battery and MagSafe power adapter.
    Press the power button to turn on the computer.

  • Fairly new battery not charging after not being used for a while

    My computer (Elitebook 2530p) has not been used for a while, perhaps a month or two. The battery used to hold for over 3 hours of light use.
    Now, the battery won't charge with the message "0% available (plugged in, not charging)"
    I can't find a battery refresh utility in the BIOS, or any way to interact with the battery. Is there something I'm missing? Should the battery just go dead after not being used for a while?
    Update: fixed typo

    I've run the HP battery check and got the code REOOW. Battery is dead, and I am out of warranty. I can't think of any possible reason why this should have happened.
    What does this code (REOOW) mean?

  • MacBook not booting after RAM upgrade

    I'm sorry if the case has been already posted.
    Yesterday I took my MacBook Alu unibody late 2008 to a RAM upgrade (from 2 to 4gigs) to an offical Mac Reseller. They installed it and showed me that the system loads properly and recognized the new RAM.
    I took it home, started working on After Effects and Photoshop and when i wanted to check a video on Quicktime, this program refused to boot.
    Then photoshop freeze and after effects did so. I quited all aplications and restarted. On restart after the 'bong' i've got the grey screen white an apple logo and a loading bar underneath, that was it, it never finished loading but shutting down.
    After the 2nd try the computer gave me the BAD RAM alarm signal right before the start button was pressed and nothing more. I just managed to start it ONCE on safe mode, but this one also freezed and colapsed.
    Today i didn't get the BAD ram alarm but the grey screen and loading bar after shutting down.
    I took it back to the reseler, the shop boss who did the upgrade wasn't there , the guys on the morning shift placed the old RAM back resulting the same. So they told me it's a software problem, not hardware and might be caused by a failed firmware update or something i did wrong and since i was showed that the system booted after the upgrade i can't complain or argue that they did somethiing wrong.
    So basically the want 80euros to check what's wrong with my computer plus the 120 i already payed them for a RAM that doesn't work and of course the repair cost of the computer.
    On monday i'll go to talk to the boss, what do you guys recomend me to tell him? i'm frustrated that the guys there treat me like if i broke my computer for beeing stupid and wanted to get it fixed for free, when it clearly broke after they did something wrong on it!
    please advice me!
    thanks!
    Message was edited by: finn bell

    What brand is the RAM? From what you said, it is obvious that the RAM is at fault. I would simply tell them that it is not compatible and return the RAM.
    Check the System Profiler to see what it says about the RAM (Apple Logo - About this Mac - More Info) and run this application to test the RAM:
    http://www.memtestosx.org/joomla/index.php
    If either shows any errors, print out the results and take them with you to the store.

  • Macbook battery not charging after software update

    I was doing some work on my MacBook (4,1) with the charger plugged in and the lid closed (I was using my TV as a montior. There was a software update for itunes and a few others and now it's saying the battery needs to be serviced!
    The battery currently has 62% charge, i've not disconnected the charger once in teh few hours I was working. Anyone got any ideas as to what could cause this?
    The change to needing the battery serviced was not straight after the update, I don't think so anyway. I've not really noticed it until I went to pick up my MacBook and it all started to go haywire. It because unresponsive, black screen etc.
    I've tried to reset the SMC and i've checked the charge cycyles too and it's about 250 so there's no problem there. It's just annoying as this is the 3rd battery i've had for this macbook, the other two being replaced under warranty. Now the warranty is up and it needs chaging for a 4th time!

    Hi imi_uk,
    I see you marked this question as "solved" is that the case?
    If not, are you able to startup your computer via "safe boot" by holding the SHIFT key on startup (until the Apple logo appears and the gear appears below it).
    The next step, would also be to boot off the system restore disc that came with your computer and attempt to repair the volume (the internal HD) via the the built-in disc utility.

  • Macbook pro battery not charging since lion upgrade

    I have a Macbook pro 13'' (2010 Mid) and my battery doesn't charge since last night. I installed Lion 3 days ago, and the battery was charging correctly, but since last night it doesn't charge anymore.
    At first, I thought it could be the magsafe problem, but after a few hours the battery started recharging again.
    Any idea?

    You're lucky, my friend, because at least you can use your MBP corded.
    Mine doesn't work even with MagSafe plugged. I have an almost dead MB with less than 30% battery... it's like "the final countdown" ...
    What the h... is Apple waiting for to release any solution or at least talk about this officially ?
    Grrr...
    This didn't happen to me since I bought my first iBook G3 computer and its Sony optical drive was working poorly for months !!  Finally, Apple "decided" to release a new firmware, just when I had bought an external recorder...
    This issue also stinks...

  • Macbook Pro is Not Booting After RAM Upgrade

    Hi,
    I just upgraded the RAM in my MacBook Pro running Mountain Lion from 4gb to 8gb (Using the memory that the guy at Fry's recommended). It has been stuck on the Apple logo for about 20 minutes after the upgrade, even after I made sure that the RAM was seated properly. Is it normal for it to take this long to boot after a RAM upgrade?

    I installed 8gb (2 X4gb) and it has a maximum of 8gb. I have determined that it was just bad RAM, so I will return it as soon as I can.
    Thanks.

  • IMovie will not open after ram upgrade. How can I fix this?

    I updated the ram on my computer by myself from 2gb to 4gb. Everything seemed to work fine, yet when I go to open imovie, it will not open after endlessly bouncing on my dock. I have verified disk permissions. Repaired disk Permissions. Tried replacing iMovie with the iMovie backup from my time machine. Cleared the system cache. Tried reinstalling it using the ilife 11 disk. Tried installing the previous ilife 09 version. Reinstalled snow leopard and did a time machine back up. Placed the old ram back in the computer. All this things done with no success.
    DOES SOMEBODY HAVE ANY IDEA ON WHAT I COULD DO?
    regards
    Lloyd

    Hi
    My first two thoughts
    • Faulty RAM - There are programs that can test this as Tech-tools (buy or in Apple Care pac)
    • Wrongly inserted RAM - Can be tricky and sometime not obvious - everything's looks OK but in certain situations it just randomly don't work.
    Take out the new RAM and try Your Mac without it to see that it's still OK to start with and then very carefully re-install RAM and now be very careful to see that it snaps in exactly as it's intended to.
    Yours Bengt W

  • Macbook Pro battery not charging after getting new charger

    Dog ate through my Macbook pro's charger, so I went to the apple store and bought a new charger.  The big one, that states it is for Macbook Pros.  85w, I think?
    Anyway.  The Pro runs on the charger, but its battery is not charging.
    I suppose it is possible the battery just up and died, but that would be a heck of a coincidence that it happened the moment I got a new adapter.
    Do all adapters labelled for macbook pros charge all macbook pro batteries?

    I had recently the same issue : my battery didn't want to charge anymore. I bought a new charger. Same problem. The battery didn't want to charge (a message near the battery icon at top right of the screen : "battery is not charging").
    I tried the SMC thing. Ever the same problem.
    I checked I got the latest firmware for my MacBook Pro Unibody mid-2009 (with the non-removable battery). I got it.
    My battery was less than 2 years old and got only 138 cycles.
    And the green light on the charger was not so shining as usual.
    Before going to an Apple Store, I just tried to clean my MacBook Pro power connecter.
    And... It works !
    The Power connector was just dirty.
    Now my battery is charging again.

  • MBP Battery not charging nightmare

    I'm selling my 15" Core Duo on eBay in about an hour.
    Actually maybe I'm not... the battery will charge sometimes and not other times, obviously I can't sell it like that.
    Plugged in to AC:
    Model Information:
    Serial Number:
    Manufacturer: GSA-A1175
    Device name: ASMB012
    Pack Lot Code: 012d
    PCB Lot Code: 050d
    Firmware Version: 646e
    Hardware Revision: 2800
    Cell Revision: 0000
    Charge Information:
    Charge remaining (mAh): 1513
    Fully charged: No
    Charging: No
    Full charge capacity (mAh): 5610
    Health Information:
    Cycle count: 4
    Condition: Normal
    Battery Installed: Yes
    Amperage (mA): 0
    Voltage (mV): 11279
    it sees the battery however the green light on the magsafe connector stays green and it shows it isn't charging.
    I did the PRAM thing and reset the SMC yesterday and it charged... today it refuses to work.
    This is maddening, if I can't fix this it's pretty much garbage.
    Any ideas?

    Is there a chance that this isn't charging because it's too hot? It was on the couch and got quite hot, when it cooled down it seems to be charging.

  • Battery not charging after dock connector replacement, iPhone4

    Hi all,
    My iPhone4 suffered mild water damage (water damage indicator not triggered) and misbehaved on that day. So I turned off the device and put it in a bag of rice for almost a month. When I eventually took it out, it was almost as good as before except for some weird quirks. One of them is the audio control. I can listen to music using headphone jack, but cannot listen through speakers. I see some corrosion on my dock charger. I am still able to connect to iTunes and charge using cables. I know my speakers works as I am able to hear the phone ring. However increasing and decreasing volume shows only the ringer icon with no bars underneath. Upon searching online I found out (in another thread on this website) that the phone could believe it is connected to some kind of docking device. I tried cleaning the dock using a brush, but no use.
    So I took some time and replaced the dock connector. After I finished re-assembly and turned on my phone, I noticed that my audio issue is resolved. I am now able to adjust volume using the buttons and can see the volume level (bars) go up or down. Also I can listen to the music from the speakers. However it is not syncing/charging.
    Logically this can mean two likely issues (1) I have a faulty dock connector (2) I messed up my battery during disassembly (The battery flex connector was too tight and while I was removing it with the plastic spudger, it popped up suddenly and caused my spudger to go in a tad too far. My flex cable did not rip off and I didnt see any broken pieces, so I assumed nothing bad happened, but I am not sure).
    If my dock connector is faulty, then my audio problem should not have been resolved correct? Because the logic board would not know that I have a new clean dock connector installed. This is what I am assuming, I am not sure. If some one could clarify this assumption, that would be great.
    Of course this leads me to believe that I messed up my battery. I don't have a spare battery to try out, need to buy one.
    Meanwhile I have a spare dock connector to try out. I am not sure if that is going to help. I am hoping someone in this community and say that it is obviously one problem or the other. If not, I will go through the dock connector replacement again and hope it all works out.
    Also does anyone know if I can just plug in the new dock connector to the logic board and try syncing (of course with the battery connected) while my phone is still open (and the other components have not been removed)? This would seem like a nice quick test prior to going through the full repair. I am not sure if this is safe.
    Thank you very much

    iPhones are not user servicable. Apple does NOT sell iPhone parts. Any parts you can possibly get for them have one of three possiblie origins:
    1) Counterfeit
    2) Stolen
    or
    3) salvaged from other iPhones, almost always phones that don't work for one reason or another.
    We can't advise you on how to fix your phone.
    Apple won't touch that phone any more.
    Either look for advice someplace like ifixit.com, find a competent repair shop, or dispose of it and buy a new phone.
    EVERY single documented case of an iPhone catching fire or exploding can be traced directly to damage caused by a botched repair by an unqualified person.
    Is it safe? No. Your phone is not safe. It will never be "safe" again.

  • Mbp battery not charging

    My MacBook's battery isn't charging, and when it's on battery power, it discharges very rapidly (I'm down to 77% with, if i remove the power cord, 11 minutes remaining). There are no instructions for resetting the PMU on the MacBook. What should I do?
    1.83GHz MacBook Pro   Mac OS X (10.4.6)  

    You can find instructions for resetting the MacBook Pro PMU below.
    1. If the computer is on, turn it off.
    2. Disconnect the AC Adapter and remove the computer's battery.
    3. Press and hold down the power button for 5 seconds and then release the button.
    4. Reconnect the battery and AC Adapter.
    5. Press the Power button to restart the computer.
    http://docs.info.apple.com/article.html?artnum=303319

  • My ipad 3 is not charging after ios 5 upgrade

    my New ipad stopped charging after i upgraded iOS 5.1.1 , please help. It shows not charging either its connected to USB or adapter.I am using the same adapter and cable that came with ipad.

    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
     Cheers, Tom

Maybe you are looking for

  • Problem while processing internal table

    Hi , I have to read 2 line item of same invoice no for  eg. IN_NO      !    MAT          !      AMT XYZ         !    MAT1       !     125 XYZ         !     MAT2       !     325 In o/p its display only 325 for both line items I used this statement for

  • Library issue with flash catalyst

    I've taken the suggestion of of a work around the fact that in Flash Catlyst you can't export libraries by making root files read and write with this terminal command: So this is todo with it wanting to write a file in / ( or c:\ ) for some reason. P

  • IOS 8 Upraded and unable to Backup to ITunes.

    I am unable to Backup to ITunes after upgrading to IOS 8 due to unknown error. I have tried on 2 Authorizes Computers with the same negative result. Is anyone able to please help resolve my issue. Thank you. Alex / Melbourne Australia

  • Portal does not start after RI installation

    Hi, we installed the EP 6 with the RI. The installation went through all steps without problems. At the end, when the portal should come up, the server does not start. The only message I receive in the trace log is: arguments   :     arg[00] : C:\usr

  • IMac updating problem

    has anyone had trouble upsating from snow leopard to mavericks?  I am looking at a mac from work and it ha problems updating from snow leopard to lion and I want to know if anyone else had this problem and did the update to mavericks work? If this co