MCOD Installation - Error ORA-1403 when accessing table SAPUSER

Hello.
We are in middle of a MCOD installation of 4.7 x 2.00 SR1 with BW 3.1 on Windows 2003/Oracle.
BW 3.1 is up and running, while 4.7 fails on R3loads.
Following are SAP000.log and SAPUSER.log files:
SAP000.log
===============================
D:\usr\sap\D11\SYS\exe\run/R3load.exe: START OF LOG: 20060507193904
D:\usr\sap\D11\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
D:\usr\sap\D11\SYS\exe\run/R3load.exe: version R6.40/V1.4
D:\usr\sap\D11\SYS\exe\run/R3load.exe -dbcodepage 1100 -i D:\Program Files\sapinst_instdir\R3E_472SR1_ABAP_NUC\DB/SAP0000.cmd -l D:\Program Files\sapinst_instdir\R3E_472SR1_ABAP_NUC\DB/SAP0000.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(DB) ERROR: DDL statement failed
(DROP TABLE "REPOLOAD")
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
DbSl Trace: ORA-406 occured when executing SQL statement (parse error offset = 0)
(DB) ERROR: DDL statement failed
(CREATE TABLE "REPOLOAD" ( "PROGNAME" VARCHAR2(40) DEFAULT ' ' NOT NULL , "R3STATE" VARCHAR2(1) DEFAULT ' ' NOT NULL , "MACH" NUMBER(5) DEFAULT 0 NOT NULL , "UNAM" VARCHAR2(12) DEFAULT ' ' NOT NULL , "UDAT" VARCHAR2(8) DEFAULT '00000000' NOT NULL , "UTIME" VARCHAR2(6) DEFAULT '000000' NOT NULL , "L_DATALG" NUMBER(10) DEFAULT 0 NOT NULL , "Q_DATALG" NUMBER(10) DEFAULT 0 NOT NULL , "SDAT" VARCHAR2(8) DEFAULT '00000000' NOT NULL , "STIME" VARCHAR2(6) DEFAULT '000000' NOT NULL , "MINOR_VERS" NUMBER(5) DEFAULT 0 NOT NULL , "MAJOR_VERS" NUMBER(10) DEFAULT 0 NOT NULL , "LDATA" BLOB , "QDATA" BLOB ) TABLESPACE PSAPD11620 STORAGE (INITIAL 0000000016K NEXT 0000040960K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 406)
error message returned by DbSl:
ORA-00406: COMPATIBLE parameter needs to be 9.2.0.0.0 or greater
(DB) INFO: disconnected from DB
D:\usr\sap\D11\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\D11\SYS\exe\run/R3load.exe: END OF LOG: 20060507193905
========================================
SAPUSER.log
==============================
D:\usr\sap\D11\SYS\exe\run/R3load.exe: START OF LOG: 20060507193834
D:\usr\sap\D11\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
D:\usr\sap\D11\SYS\exe\run/R3load.exe: version R6.40/V1.4
D:\usr\sap\D11\SYS\exe\run/R3load.exe -dbcodepage 1100 -i D:\Program Files\sapinst_instdir\R3E_472SR1_ABAP_NUC\DB/SAPUSER.cmd -l D:\Program Files\sapinst_instdir\R3E_472SR1_ABAP_NUC\DB/SAPUSER.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(DB) INFO: disconnected from DB
D:\usr\sap\D11\SYS\exe\run/R3load.exe: job completed
D:\usr\sap\D11\SYS\exe\run/R3load.exe: END OF LOG: 20060507193835
==============================================
Kindly look into it.
Thanks
KT

Hi KT,
Actually the problem is not ORA-1403, but the ORA-00406: COMPATIBLE parameter needs to be 9.2.0.0.0 or greater.
Please update the COMPATIBLE parameter in your init<SID>.ora file and restart the database. This should fix your problem.
Kind regards,
Alexander Webster
P.S. points are appreciated if my reply was helpfull.
Message was edited by: Alexander Webster
Removed typo

Similar Messages

ORA-1403 when accessing table SAPUSER

Hi all,
I was performed from Windows 2003 R2 32bit to Windows 2008 R2 64bit for Homogeneous system copy for SAP ERP 6.0 SR2.
I occure error during Importing on Windows 2008 R2 64bit using sapinst.exe of Install Master ERP 2005 SR2.
Source system : Windows 2003 R2 32bit + Oracle 10.2.0.2 + ERP 2005 SR2 with Non-Unicode
Target system : Windows 2008 R2 64bit + Oracle 10.2.0.5 + ERP 2005 SR2 with Non-Unicode
The step is stop "Import ABAP"
1. Error detail log
D:\usr\sap\MAR\SYS\exe\nuc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
D:\usr\sap\MAR\SYS\exe\nuc\NTAMD64\R3load.exe: version R7.00/V1.4
Compiled Jul 16 2007 22:44:14
D:\usr\sap\MAR\SYS\exe\nuc\NTAMD64\R3load.exe -dbcodepage 1100 -i test_MIGKEY.cmd -l test_MIGKEY.log -K
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(CNV) ERROR: rscpMCActivate rc = 2048
--------------------------------------5-
code: 2048 RSCPENOCONV
in character code "MDMP" unknown
module: rscpc location: 22 line: 14584
TSL01: F43 p3: MDMP
D:\usr\sap\MAR\SYS\exe\nuc\NTAMD64\R3load.exe: job finished with 1 error(s)
D:\usr\sap\MAR\SYS\exe\nuc\NTAMD64\R3load.exe: END OF LOG: 20140924032758
2. R3load test connection error
C:\Users\maradm.IDES>R3load.exe -testconnect
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
R3load.exe: START OF LOG: 20140924033549
R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
R3load.exe: version R7.00/V1.4
Compiled Jul 16 2007 22:44:14
R3load.exe -testconnect
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(DB) INFO: disconnected from DB
R3load.exe: job completed
R3load.exe: END OF LOG: 20140924033549
C:\Users\maradm.IDES>
3. R3trans connect test error
C:\Users\maradm.IDES>R3trans -d .
This is R3trans version 6.14 (release 700 - 15.06.07 - 15:50:00).
2EETW000 sap_dext called with msgnr "2":
2EETW000 ---- db call info ----
2EETW000 function: db_ntab
2EETW000 fcode: NT_RDTDESCR
2EETW000 tabname: TADIR
2EETW000 len: 5
2EETW000 key: TADIR
2EETW000 retcode: 2
R3trans finished (0012).
trans.log
4 ETW000 [dev trc ,00000] SELECT USERID, PASSWD FROM SAPUSER WHERE USERID IN (:A0, :A1)
4 ETW000 393 0.034113
4 ETW000 [dbsloci. ,00000] *** ERROR => ORA-1403 when accessing table SAPUSER
4 ETW000 429 0.034542
4 ETW000 [dev trc ,00000] set_ocica() -> OCI or SQL return code 1403 14 0.034556
4 ETW000 [dev trc ,00000] Disconnecting from connection 0 ... 12 0.034568
4 ETW000 [dev trc ,00000] Rolling back transaction ... 10 0.034578
4 ETW000 [dev trc ,00000] Closing user session (con_hdl=0,svchp=000000000025BF58,usrhp=000000000AC98A60)
4 ETW000 221 0.034799
4 ETW000 [dev trc ,00000] Now I'm disconnected from ORACLE 413 0.035212
4 ETW000 [dev trc ,00000] Try to connect with default password 21 0.035233
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@MAR on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
4 ETW000 24 0.035257
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 27 0.035284
4 ETW000 [dev trc ,00000] 0 WE8DEC 1 0000000000253E70 000000000025C098 00000000002640F8
4 ETW000 12 0.035296

Hi Vagesan,
Thank you for your reply
First i try to connection test via R3load -testconnect
 It is ok.
 This problem not correct password of SAPR3. so i modify table SAPUSER OF OPS$ schema. I refer to Note 400241 - Problems with ops$ or sapr3 connect to Oracle
Second.
I retry SAPINST gui of sapinst.exe with button "retry".
but this error message the below.
I guess this IDES System is MDMP codepage.
D:\usr\sap\MAR\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20140924061219
D:\usr\sap\MAR\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
D:\usr\sap\MAR\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4
Compiled Jul 17 2007 00:40:17
D:\usr\sap\MAR\SYS\exe\uc\NTAMD64\R3load.exe -dbcodepage 4103 -i test_MIGKEY.cmd -l test_MIGKEY.log -K
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(CNV) ERROR: rscpMCActivate rc = 2048
--------------------------------------5-
code: 2048 RSCPENOCONV
in character code "MDMP" unknown
module: rscpc location: 22 line: 14584
TSL01: F43 p3: MDMP
D:\usr\sap\MAR\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
D:\usr\sap\MAR\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20140924061219

Abap import error DbSl Trace: ORA-1403 when accessing table SAPUSER

hi all
I am installing ERP 6.0 (ABAP) on win2003 cluster, oracle 10g, I have error at database instance intallation. here some logs
DD03L.log
I:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20090812102157
I:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#18 $ SAP
I:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Apr 3 2009 09:03:56
I:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe -i DD03L.cmd -dbcodepage 4103 -l DD03L.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(RTF) ########## WARNING ###########
 Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
(TPL) ERROR: unknown template variable "tablespace"
I:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
I:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20090812102157
import_monitor.log
ERROR: 2009-08-12 10:21:57 com.sap.inst.migmon.LoadTask run
Loading of 'DD03L' import package is interrupted with R3load error.
Process 'I:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe -i DD03L.cmd -dbcodepage 4103 -l DD03L.log -stop_on_error' exited with return code 2.
For mode details see 'DD03L.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2009-08-12 10:22:25
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2009-08-12 10:22:25
1 error(s) during processing of packages.
INFO: 2009-08-12 10:22:25
Import Monitor is stopped.
sapinst_dev.log
ERROR 2009-08-12 10:22:25.718
 CJSlibModule::writeError_impl()
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
TRACE 2009-08-12 10:22:25.718 [iaxxejsbas.hpp:483]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2009-08-12 10:22:25.734 [sixxcstepexecute.cpp:951]
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR ( Last error reported by the step :Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.).
TRACE 2009-08-12 10:22:25.781 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing service SAP ERP 6.0 Support Release 3 > SAP Systems > Oracle > High-Availability System > Based on AS ABAP > Database Instance( Last error reported by the step :Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.). You may now <ul> <li> choose Retry to repeat the current step. </li> <li> choose View Log to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/ERP/SYSTEM/ORA/HA/ABAP/DB. </body></html>
TRACE 2009-08-12 10:22:25.781 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
sapinst.log
WARNING 2009-08-12 10:22:25.718
Execution of the command "C:\j2sdk1.4.2_21-x64\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.4.2_21"
Java(TM) Platform, Standard Edition for Business (build 1.4.2_21-b03)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_21-b03, mixed mode)
Import Monitor jobs: running 1, waiting 1, completed 26, failed 0, total 28.
Loading of 'DD03L' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 26, failed 1, total 28.
ERROR 2009-08-12 10:22:25.718
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2009-08-12 10:22:25.734
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR ( Last error reported by the step :Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.).
any idea
Regards
ABH

hi
All logs are above (include import_monitor.log and java)
thanks

SQL error "-601" occurred when accessing table "SMEN_BUFFC

Hi Guys
I am getting the above error at tiem when i am logging on.
The actual error message in the st22 dump is
Database error text........: "SMEN_BUFH5 in R3EPT32000 type *SQLPKG already
exists. Job=018343/EPT01/WP00"
The termination occurred in the ABAP/4 program "SAPLSMTR_NAVIGATION_MODULES "
in
"SMTR_STRU_PROCESS_STRUCTURE".
The main program was "SAPLSMTR_NAVIGATION ".
This seems to happen when some users log on to the system and then tries to change their password. If I stop sap and start it again, the rror goes away.
I have actually deleted the sql package with the command
DLTSQLPKG R3EPT32000\SMEN_BUFH5.
This seem to work but after a while the erro comes back again

Dear Christian,
at the moment in our Productive system we have hundreds of Dumps: nearly at every log on user get a DUMP with the well known message.
Analyzing develoepr trace we find following information:
C Wed Mar 14 09:54:35 2007
C Concurrent prepare happened for SIPID
C Library name: R3S1132000
C Package name: SMEN_BUFH5
C Statement name: "QL1YQAAAAAFC"
C SQL Error: -601
C *** ERROR => Error -601 in function prep_cached_op [dbsldb4.cpp 7057]
C Library name: R3S1132000
C Package name: SMEN_BUFH5
C Statement name: "QL1YQAAAAAFC"
C Failing statement is:
C , SELECT   *   FROM R3S11DATA/"SMEN_BUFFC" WHERE "MANDT" = ? AND "UNAME" = ? WITH UR
B ***LOG BY4=> sql error -601   performing PRE on table SMEN_BUFFC [dbtran 7009 ]
B ***LOG BY0=> SMEN_BUFH5 in R3S1132000 tipo *SQLPKG esiste gi{. Job=251690/S1100/WP12 [dbtran 7009 ]
B dbtran ERROR LOG (hdl_dbsl_error): DbSl 'PRE'
B   FHDR: {tab='SMEN_BUFFC                    ',
fcode=53, mode=2, bpb=0, dbcnt=0, crsr=1,
B          hold=0, keep=1, xfer=2, pkg=0, upto=0, init:b=0,
B          init:p=0000000000000000, init:#=278, wa:p=0000000000000000, wa:#=278}
B dbtran ERROR LOG (hdl_dbsl_error): DbSl 'PRE'
B   STMT:
B   CRSR: {tab='SMEN_BUFFC                    ', id=-1, hold=0, prop=0x10000, max.in@0=1, fae:blk=10,
B          con:nm='R/3', con:id=0, con:vndr=2, val=2,
B          key:1=0, key:#=6, xfer=2, xin:#=0, xout:#=0, upto=0,
B          wa:p=000000800440C380, init:p=00000090D4CF4DF8, init:#=15, init:b=0}
Additionaly we also tried to delete only mentioned SQL package (while system was running), but without succes.
What do you think?
Giuseppe

SQL error 60 occurred when accessing table "STXH ".

Hi Friends,
I have written a BAPI to create a sales order wihch would store the Texts in differant Text id like, operating comments, shipping instructinos, warehouse instructions and the table stored in the table STXH.
In my program i am trying to insert three type of Text id ...Operating instructions, Shipping instructions and Warehouse information. If i am running through the debug, the sales order is created and the respective Text Ids are stored in the respetive Text Id. But when just run the progam, it gives me an error saying the table in / wa sin a deadlock sitation.
Has anyone faced this kind of situation. Pls suggest me ad as also this is an urgetnt sittuation here.
Thanks in advance.
Venky.

Hi Santhosh,
Didn't get a chance to log into this for a long time. I am again facing this problem after using this function for a differant object. Is there any other possible way ?
Thanks,
Venky.

ERROR = ORA-1403 after 10.2.0.4 32 bit upgrade

Hi Gurus,
We have a problem after oracle upgrade 9i to 10g
The SAP instance disp+work no working, but R3trans -d is ok.
The wp table no work. ORA-1031 when accessing table SAPUSER
Please let me know how to fix this.
Regards,

Hi,
The problem has been solved after applying the following steps.
select * from V$NLS_PARAMETERS where PARAMETER = 'NLS_NCHAR_CHARACTERSET';
Note 669902 - Setting the national character set to UTF8
select USERNAME,ACCOUNT_STATUS from dba_users;
ALTER USER <USER> ACCOUNT UNLOCK;
ALTER PROFILE DEFAULT LIMIT FAILED_LOGIN_ATTEMPTS UNLIMITED;
SAP's note was the key to correct the problem.
sqlplus /NOLOG @oradbusr.sql <schemaowner> NT <userdomain>
Apply the SAP Note: 50088
Thanks
Edited by: Gabino Sequera Flores on Aug 31, 2010 4:54 PM

Oracle error ORA-22905: cannot access rows from a non-nested table item

Oracle error ORA-22905: cannot access rows from a non-nested table item
Creating a report using oracle plsql code .
Getting error ;
Oracle error ORA-22905: cannot access rows from a non-nested table item
when I am trying to pass data in clause in pl sql proc
basically I have a proc which takes 2 parameters(a and b)
proc (
P_a varchar2,
p_b varchar2,
OUT SYS_REFCURSOR
culprit code which is giving me the error and on google they say cast it but I dont know how to do it in my context
--where id in (
--        SELECT * FROM THE (SELECT p_cd_common.get_table_from_string(P_a) FROM dual)
--        union
--        SELECT * FROM THE (SELECT p_cd_common.get_table_from_string(P_b) FROM dual)
data sample returned from this :SELECT * FROM THE (SELECT p_cd_common.get_table_from_string(P_a) FROM dual)
'Abc','def',
data sample returned from this;SELECT * FROM THE (SELECT p_cd_common.get_table_from_string(P_b) FROM dual)
'fgd','fth',
Any answers ?
How to pass data in clause in a better way

Why are you creating a duplicate post? I already asked you to post p_cd_common.get_table_from_string. In particular what is function return type and where it is declared. As I already mentioned, most likely function return type is declared in the package and therefore is PL/SQL type. And TABLE operator can only work with SQL types.
SY.

RSQL ERROR 23 WHEN ACCESSING TABLE "BKPF"

Can you tell me what is wrong with this statement. I get an ABAP runtime error.
DBIF_RSQL_INVALID_RSQL.
RSQL ERROR 23 WHEN ACCESSING TABLE "BKPF"
START-OF-SELECTION.
SELECT BUDAT BLDAT BLART XBLNR_ALT BKTXT XSNET WAERS FROM BKPF INTO
IT_BKPF
         WHERE BUKRS = '0004'
         AND BLDAT > '2007/01/01'.

It was the same with me. My declaration for "TYPES" wasn't like my "SELECT".
I have a tip: In your "SELECT", select all fields that was declared in your "TYPES".
Example:
TYPES: BEGIN OF ty_bkpf,
   bukrs TYPE BKPF-BUKRS,
   belnr TYPE BKPF-BELNR,
   blart TYPE BKPF-BLART,
   budat TYPE BKPF-BUDAT.
TYPES: END OF ty_bkpf.
DATA: T_BKPF TYPE TABLE OF ty_bkpf,
SELECT BUKRS BELNR BLART BUDAT
   INTO TABLE T_BKPF
   FROM BKPF
   WHERE MONAT = '11'
     AND GJAHR = '2013'.
Best Regards

Runtime error SQL error 3114 occurred when accessing program CX_ w

Hi Friends,
Iam in a big mess . I have one query based on one my Zinfocube.This query ia attached in the workbook .. Previuolsy all was fine , but now whever iam executing this query it is throwing me the exception
Query 0: Runtime error SQL error 3114 occurred when accessing program CX_ with parallel processing via RFC.
and
Beim Lesen der Daten sind Fehler aufgetreten. Navigation ist mÃ¶glich
I am not able to get the cause of error ..
Can anybody help me in this regrd as its a bit urgent.
Thanks in advance..

Hi , thanks for replying ,
I have tried running query through RSRT also , its not working still it is giving me the same error .
In st22 it is showing me the follwing dump.
DBIF_REPO_SQL_ERROR
Short text
    SQL error 3114 occurred when accessing program
What happened?
    The system is no longer linked to an ORACLE instance.
    No further operations can be performed on the database.
What can you do?
    You cannot eliminate this error yourself.
    Please inform your database administrator.
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
Error analysis
    The system attempted to access an ORACLE instance to which
    it is no longer linked.
    This situation may arise because the ORACLE instance
    has been stopped due to an error or an external operation.
How to correct the error
    Database error text........: "ORA-03114: not connected to ORACLE"
    Triggering SQL statement...: "CX_SQL_EXCEPTION==============CP "
    The current status of the ORACLE instance cannot be determined.
    It may be still inactive or the database administrator may have
    restarted it.
    In any case, all systems that have accessed the ORACLE instance
    must be restarted after the ORACLE instance has been restarted.
    If you were working on a central system, inform
    your system administrator.
    If you were working on an external local system, inform
    the person responsible for this system.
    If you were working on your own local system, restart
    the system yourself.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "DBIF_REPO_SQL_ERROR" " "
    "CL_SQL_RESULT_SET=============CP" or "CL_SQL_RESULT_SET=============CM006"
    "NEXT_PACKAGE"
    If you cannot solve the problem yourself and want to send an errornotification to SAP, include the following information:
1. The description of the current problem (short dump)
   To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
   Display the system log by calling transaction SM21.
   Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
   In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_REPO_SQL_ERROR" " "
"CL_SQL_RESULT_SET=============CP" or "CL_SQL_RESULT_SET=============CM006"
"NEXT_PACKAGE"
Thanks in Advance..

Error ORA-06502 When using function REPLACE in PL/SQL

Hi,
I have a PL/SQL procedure which gives error 'Error ORA-06502 When using function REPLACE in PL/SQL' when the string value is quite long (I noticed this with a string 9K in length)
variable var_a is of type CLOB
and the assignment statement where it gives the error is
var_a := REPLACE(var_a, '^', ''',''');
Can anyone please help!
Thanks

Even then that shouldn't do so:
SQL> select overload, position, argument_name, data_type, in_out
2 from all_arguments
3 where package_name = 'STANDARD'
4 and object_name = 'LPAD'
5 order by 1,2
6 /
OVERLOAD   POSITION ARGUMENT_NAME                  DATA_TYPE                      IN_OUT
1                 0                                VARCHAR2                       OUT
1                 1 STR1                           VARCHAR2                       IN
1                 2 LEN                            BINARY_INTEGER                 IN
1                 3 PAD                            VARCHAR2                       IN
2                 0                                VARCHAR2                       OUT
2                 1 STR1                           VARCHAR2                       IN
2                 2 LEN                            BINARY_INTEGER                 IN
3                 0                                CLOB                           OUT
3                 1 STR1                           CLOB                           IN
3                 2 LEN                            NUMBER                         IN
3                 3 PAD                            CLOB                           IN
4                 0                                CLOB                           OUT
4                 1 STR1                           CLOB                           IN
4                 2 LEN                            NUMBER                         INI wonder what happened?

SQL Error 3114 occured when accessing program CX_

Hi there,
I have build an infoset on a infocube and ODS. On this infoset I've build a query using a calculated key figure: Availibility%
Inside this key figure I have 2 restricted key figures: Allocation and Availibility
When I execute this query I get the error: "SQL Error 3114 occured when accessing program CX_"
If I remove the calculated key figure from the columns it works fine. If I place one of the 2 restricted key figures in the query it also work fine. But If i place both the restricted key figures in the columns, I also get the error. Or If I place the calculated key figure in the columns, I also get the error. Does somebody know what the problem is?

No they don't show me the problem. I've executed with RSRT transaction and I;ve got this error with the ABAP-debugger:
error in >> l_repid <<
 >> l_include <<
 >> l_source_line <<

Why do i keep getting error msg #1403 when updating ipod software in itunes

why do i keep getting error msg #1403 when updating ipod software in itunes

I Googled an found no good solutions. II would try:
- Making sure that you have the latest version of iTunes, 10.6.
- Disable firewall and antivirus.
What iOS is currently on the iPod?

I keep getting Error code: ERR_TIMED_OUT when accessing only one website through googlechrome or safari

I keep getting Error code: ERR_TIMED_OUT when accessing only one website through googlechrome or safari

Www.Onereceipt.Com<http://Www.Onereceipt.Com>
Sent from my iPhone

Runtime error ora-12703 when running utl_mail

hello,
I call a procedure through push button to use UTL_MAIL.send(..) and I got error ora-12703.
There is no error during compilation.
For your info, I manage to execute the same code on stored procedure using TOAD and I received the email sent using TOAD and telnet from my local.
For info:
Forms developer version:
Forms [32 Bit] Version 10.1.2.0.2 (Production)
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
procedure:
PROCEDURE test_email IS
BEGIN
UTL_MAIL.send (
sender => '[email protected]',
recipients => '[email protected]',
cc => '[email protected]',
bcc => '[email protected]',
subject => 'Test',
MESSAGE => 'Hello World',
mime_type => 'text; charset=us-ascii',
priority => 3
END;
Could anyone please help me on this.
Regards,
Dayang

Hi All,
I tried another function that use utl_smtp to send email.
Again I could recieve email when I execute the function in TOAD but got error ora-12703 when I ran using forms.
When I ran the form, only "debug 1st" apear, then after that it returned error ora-12703.
Function:
FUNCTION SEND_MAIL
(pIssuer IN VARCHAR2,
pReceiver IN VARCHAR2,
pSender IN VARCHAR2,
pSubject IN VARCHAR2,
pMessage IN VARCHAR2) RETURN VARCHAR2 IS
c utl_smtp.connection;
respuesta utl_smtp.reply;
pServer VARCHAR2(50) := '10.0.3.79';
CRLF CHAR(2) := CHR(13) || CHR(10);
BEGIN
message('debug 1st');
-- Abre la conexión al Server de correo
c := utl_smtp.open_connection(pServer);
message('debug2nd');
respuesta := utl_smtp.helo(c, pServer);
-- Inicia el Issuer del correo.
respuesta := utl_smtp.mail(c, pSender);
-- Inicia el Receiver
respuesta := utl_smtp.rcpt(c, pReceiver);
respuesta := utl_smtp.open_data(c);
-- Escribe la cabecera del e-mail
utl_smtp.write_data(c, 'From: ' || pIssuer || CRLF);
utl_smtp.write_data(c, 'To: ' || pReceiver || CRLF);
-- Escribe el Subject
utl_smtp.write_data(c, 'Subject: ' || pSubject || CRLF);
-- Escribe el texto del Message.
utl_smtp.write_data(c, CRLF || pMessage);
utl_smtp.write_data(c, CRLF || '.');
respuesta := utl_smtp.close_data(c);
-- Cierra la conexión
respuesta := utl_smtp.quit(c);
RETURN '0';
EXCEPTION
WHEN utl_smtp.transient_error OR utl_smtp.permanent_error THEN
utl_smtp.quit(c);
RETURN sqlerrm;
--raise_application_error(-20000,
-- 'El envío del email ha fallado devolviendo el siguiente error: ' || sqlerrm);
END;
Regards,
Dayang

Error ORA-10635 when shrink a table!!

Hi all,
I have a table created in a tablespace using ASSM and when i try to shrink this table i receive the error ORA-10635. I can do shrink on other tables that are on the same tablespace of that table that is giving me this error.
Anyone can help please??
Tks,
Paulo.

10635, 00000, "Invalid segment or tablespace type"
// *Cause: Cannot shrink the segment because it is not in auto segment space
// managed tablespace or it is not a data, index or lob segment.
// *Action: Check the tablespace and segment type and reissue the statement

MCOD Installation - Error ORA-1403 when accessing table SAPUSER

Similar Messages

Maybe you are looking for