Runtime error ora-12703 when running utl_mail
hello,
I call a procedure through push button to use UTL_MAIL.send(..) and I got error ora-12703.
There is no error during compilation.
For your info, I manage to execute the same code on stored procedure using TOAD and I received the email sent using TOAD and telnet from my local.
For info:
Forms developer version:
Forms [32 Bit] Version 10.1.2.0.2 (Production)
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
procedure:
PROCEDURE test_email IS
BEGIN
UTL_MAIL.send (
sender => '[email protected]',
recipients => '[email protected]',
cc => '[email protected]',
bcc => '[email protected]',
subject => 'Test',
MESSAGE => 'Hello World',
mime_type => 'text; charset=us-ascii',
priority => 3
END;
Could anyone please help me on this.
Regards,
Dayang
Hi All,
I tried another function that use utl_smtp to send email.
Again I could recieve email when I execute the function in TOAD but got error ora-12703 when I ran using forms.
When I ran the form, only "debug 1st" apear, then after that it returned error ora-12703.
Function:
FUNCTION SEND_MAIL
(pIssuer IN VARCHAR2,
pReceiver IN VARCHAR2,
pSender IN VARCHAR2,
pSubject IN VARCHAR2,
pMessage IN VARCHAR2) RETURN VARCHAR2 IS
c utl_smtp.connection;
respuesta utl_smtp.reply;
pServer VARCHAR2(50) := '10.0.3.79';
CRLF CHAR(2) := CHR(13) || CHR(10);
BEGIN
message('debug 1st');
-- Abre la conexión al Server de correo
c := utl_smtp.open_connection(pServer);
message('debug2nd');
respuesta := utl_smtp.helo(c, pServer);
-- Inicia el Issuer del correo.
respuesta := utl_smtp.mail(c, pSender);
-- Inicia el Receiver
respuesta := utl_smtp.rcpt(c, pReceiver);
respuesta := utl_smtp.open_data(c);
-- Escribe la cabecera del e-mail
utl_smtp.write_data(c, 'From: ' || pIssuer || CRLF);
utl_smtp.write_data(c, 'To: ' || pReceiver || CRLF);
-- Escribe el Subject
utl_smtp.write_data(c, 'Subject: ' || pSubject || CRLF);
-- Escribe el texto del Message.
utl_smtp.write_data(c, CRLF || pMessage);
utl_smtp.write_data(c, CRLF || '.');
respuesta := utl_smtp.close_data(c);
-- Cierra la conexión
respuesta := utl_smtp.quit(c);
RETURN '0';
EXCEPTION
WHEN utl_smtp.transient_error OR utl_smtp.permanent_error THEN
utl_smtp.quit(c);
RETURN sqlerrm;
--raise_application_error(-20000,
-- 'El envío del email ha fallado devolviendo el siguiente error: ' || sqlerrm);
END;
Regards,
Dayang
Similar Messages
-
Runtime errors "Raise_Exception" occur when running crystal report
Dear all expert,
I had develop a CR. It is fine and I can run it. but in our remote system, there is a runtime error "RAISE_EXCEPTION" with exception condition "EXECUTION_HALTED". There is no error show to me at CR side where the report is running fine. But I wonder why the is a runtime error in the remote system.
Thank You.Hi Ingo,
I had check the transport folder in my integration solution installer kit folder. There is only Folder with name "ansi" and "unicode_compatible".
The readme for my transport file are as below:
There are two sets of transport files, which can be used with BusinessObjects Enterprise Integration Kit for SAP. One set is ANSI and the other set is Unicode enabled.
The set of transports you must use depends on the BASIS system your SAP system is running on. Additionally, each transport consists of a data file and a cofile, which are listed in brackets behind the transport names.
If your SAP system is running on a BASIS system earlier than 6.20, you must use the files listed below:
(These files are ANSI.)
Open SQL Connectivity transport (K900084.r22 and R900084.r22)
Info Set Connectivity transport (K900085.r22 and R900085.r22)
Row-level Security Definition transport (K900086.r22 and R900086.r22)
Cluster Definition transport (K900093.r22 and R900093.r22)
Authentication Helpers transport (K900088.r22 and R900088.r22)
If your SAP system is running on a 6.20 BASIS system or later, you must use the files listed below:
(These files are Unicode enabled.)
Open SQL Connectivity transport (K900574.r21 and R900574.r21)
Info Set Connectivity transport (K900575.r21 and R900575.r21)
Row-level Security Definition transport (K900576.r21 and R900576.r21)
Cluster Definition transport (K900585.r21 and R900585.r21)
Authentication Helpers transport (K900578.r21 and R900578.r21)
The following files must be used on an SAP BW system:
(These files are Unicode enabled.)
Content Administration transport (K900579.r21 and R900579.r21)
Personalization transport (K900580.r21 and R900580.r21)
MDX Query Connectivity transport (K900581.r21 and R900581.r21)
ODS Connectivity transport (K900582.r21 and R900582.r21)
The dump "raise_exception" occur when in the Crystal Report Designer.
Thank You. -
Getting Runtime Error 6 Overflow when Running a BI Publisher Template
Hi,
I have a requirement to in a template where i am filling the table with empty lines if the no of lines in the template per page are less then the specified no of lines per page.
It is working when the data is for 4 suppliers when the data is huge ie: 40 suppliers the template is showing Runtime Error 6 Overflow.
can anyone please guide on this,if needed i will mail the template and the xml.
Best Regards,
MahiHi ,
I am also getting the same error. When i am trying to print 6 lines per page in xml publiesher report, it is working fine but if i am trying to print 7 lines or more, then it is going into Runtime Error 6 Overflow. Can you suggest something on this?
Regards
Sachin -
Ora-3113 when running sql in sqlplus mts. dedicated works fine
when i try to execute a simple query (return 1 row), from sqlplus (in the server database) by shared connection, i recive ora-3113. by dedicated conection it works fine. environment datas : server side (windows 2003 server; 10.2.0.1).
part of my trace file :
nsprecv: normal exit
nsrdr: got NSPTDA packet
nsrdr: NSPTDA flags: 0x40
nsrdr: normal exit
nsdo: entry
nsdo: cid=0, opcode=85, bl=2001, what=0, uflgs=0x0, cflgs=0x1
nsdo: nsctx: state=6, flg=0x620d, mvd=0
nsdo: gtn=127, gtc=127, ptn=10, ptc=2011
nserror: entry
nsdo: error exit
nsdo: nsctxrnk=0
nsdo: error exit
nioqer: entry
nioqer: incoming err = 12151
nioqce: entry
nioqce: exit
nioqer: returning err = 3113
nioqer: exit
nioqrc: exit
nioqbr: entry
nioqbr: state = normal (0)
nioqsm: entry
nioqsm: Sending break packet (1)...
nsdo: entry
nsdo: cid=0, opcode=67, bl=1, what=17, uflgs=0x100, cflgs=0x3
nsdo: rank=64, nsctxrnk=0
nsdo: nsctx: state=3, flg=0x420d, mvd=0
nsdo: nsctxrnk=0
nsdo: error exit
nioqsm: send-break: failed to send break...
nioqper: error from send-marker
nioqper: nr err code: 0
nioqper: ns main err code: 12583
nioqper: ns (2) err code: 0
nioqper: nt main err code: 0
nioqper: nt (2) err code: 0
nioqper: nt OS err code: 0
nioqsm: exit
nioqer: entry
nioqer: incoming err = 12152
nioqce: entry
nioqce: exit
nioqer: returning err = 3113
nioqer: exit
nioqbr: returning 3113
nioqbr: exit
nioqds: entry
nioqds: disconnecting...
thanksThread continued at -->
ora-3113 when running sql in sqlplus mts. dedicated works fine -
Getting ora-0600 when running PROFLOAD.sql
Hi,
I was getting ORA-0600 when running PROFLOAD.sql script for DBMS_PROFILER (from SYS account). I am running Oracle 9i personal edition on win98. Did anybody had the same problem??Here is the full dump..
QL> @profload
Package created.
Grant succeeded.
Synonym created.
create or replace library sys.dbms_profiler_lib wrapped
ERROR at line 1:
ORA-00600: internal error code, arguments: [16201], [], [], [], [], [], [], []
create or replace
ERROR at line 1:
ORA-00600: internal error code, arguments: [16201], [], [], [], [], [], [], []
Testing for correct installation
PACKAGE BODY sys.DBMS_PROFILER - missing or invalid
PL/SQL procedure successfully completed. -
ORA -04062 when running forms aginst a different schema
Hello,
I am getting this error (ORA -04062 signature of 'procedure' has been changed)when I try to run my form aginst my test- schema (different from my development schema). I get rid of the error if I compile the form against the test schema. In the production environment I have to run this form against multiple schemas, so recompilation is not a possible solution.
Has anybody else come across this problem.
nullThanks John for your reply !
I think my problem is close to the second thing you mention as a possible cause. I found out that I had used a parameter of type table%ROWTYPE in call to a pacakged procedure. When I defined a "TYPE MyRec IS RECORD" record type in my pacakge specification and used that as the type for the parameter my form seems to work against my test schema without recompilation. Unfortunately the table is pretty large so my package specification does not look so neat anymore. And I lost the dynamics associated with the %ROWTYPE attribute.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by John Alexander ([email protected]):
That's a well-known bug. Its worse with a v7 database, but still can occur with 8/8i.
A couple of things to look for:
1) REMOTE_DEPENDENCIES_MODE is SIGNATURE instead of TIMESTAMP in init.ora.
2) Forms that call stored procedures with a large parameter list (about 55 or more) can get a run-time error ORA-4062 if running on a different schema than where it was compiled.
3) You can also hit a snag if you are calling a dbms_XX package within the form. Instead, call it within a db procedure, which you can call from the form.
John Alexander
St. Petersburg, FL www.SummitSoftwareDesign.com <HR></BLOCKQUOTE>
null -
I tried to update my iTunes, but I keep getting a runtime error R6034 attempt to run C runtime library incorrectly. I also got an Error 7 (Windows error 1114). Now my currently iTunes will not open.
Hey twhitten!
Here is an article that will help you troubleshoot this issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden -
ERROR ORA-30200 IN RUNNING CREATION FILE - Forms [32 Bit]
Running a process of Forms [32 Bit] Version 6.0.5.35.3 get the error ORA-30200 while running the same process from a different computer file creation occurs in a correct way (This is a client-server)
The form uses the TEXT_IO and specifically the following functions
TEXT_IO.FILE_TYPE;
TEXT_IO.FOPEN (FILE, 'W');
TEXT_IO.PUT_LINE (OUT_FILE CR);
TEXT_IO.FCLOSE (OUT_FILE);
At this point I believe that the problem is not in form but more in the PC used for the implementation thereof; Can you help on what to monitor and especially if there are requirements for the client so that TEXT_IO functions properly.
Thank you very much ...Daniele,
What is the format of the file name you are creating? I did a quick Google search and the common thread I found was a reference to a file name used "Long File Names" instead of the old 8.3 format. It is also possible that this error could result from the user not having permission to write to the file location.
Craig... -
Error ORA-06502 When using function REPLACE in PL/SQL
Hi,
I have a PL/SQL procedure which gives error 'Error ORA-06502 When using function REPLACE in PL/SQL' when the string value is quite long (I noticed this with a string 9K in length)
variable var_a is of type CLOB
and the assignment statement where it gives the error is
var_a := REPLACE(var_a, '^', ''',''');
Can anyone please help!
ThanksEven then that shouldn't do so:
SQL> select overload, position, argument_name, data_type, in_out
2 from all_arguments
3 where package_name = 'STANDARD'
4 and object_name = 'LPAD'
5 order by 1,2
6 /
OVERLOAD POSITION ARGUMENT_NAME DATA_TYPE IN_OUT
1 0 VARCHAR2 OUT
1 1 STR1 VARCHAR2 IN
1 2 LEN BINARY_INTEGER IN
1 3 PAD VARCHAR2 IN
2 0 VARCHAR2 OUT
2 1 STR1 VARCHAR2 IN
2 2 LEN BINARY_INTEGER IN
3 0 CLOB OUT
3 1 STR1 CLOB IN
3 2 LEN NUMBER IN
3 3 PAD CLOB IN
4 0 CLOB OUT
4 1 STR1 CLOB IN
4 2 LEN NUMBER INI wonder what happened? -
RW-50004: Error code received when running external process.
Hi,
I am trying to install 11.5.10 on windows vista and receiveing following error.
RW-50004: Error code received when running external process. Check log for details. Running Database Install Driver for VIS Instance
When checked on the log file following is the error. Could anyone pls help me with this regard
There was an error while running the command - c:\OracleApps\visdb\9.2.0\temp\VIS_erp\adrun9i.cmd APPS APPS
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
The process tried to write to a nonexistent pipe.
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process.
"dbInstancecfg" file shows below error
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCVIS))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=erp.erp)(Port=1521))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 13-JUL-2008 05:48:04
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Starting tnslsnr: please wait...
TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
32-bit Windows Error: 5: Input/output error
addlnctl.cmd exiting with status 3
OpenSCManager failed
adsvdlsn.cmd exiting with status 1002
ERRORCODE = 1002 ERRORCODE_END
.end std out.
System error 1060 has occurred.
The specified service does not exist as an installed service.
.end err out.
File c:\OracleApps\visdb\9.2.0\appsutil\install\VIS_erp\afmkinit_inst.cmd not instantiated in the current pass, this file will not be executed
Executing script in InstantiateFile:
c:\OracleApps\visdb\9.2.0\appsutil\install\VIS_erp\afmkinit.cmd
script returned:
Sun 07/13/2008
05:48 AM
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
"afmkinit.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Skipping INSTE8_PRF
Skipping INSTE8_APPLY
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: c:\OracleApps\visdb\9.2.0\appsutil\install\VIS_erp
adsvdlsn.cmd INSTE8_SETUP 1002
AutoConfig is exiting with status 1Thanks for the update and the link was informational.
Can I install following on windows vista? Pls confirm.
Oracle® Applications 11i Release 10.2 Media Pack for
Microsoft Windows (32-bit) No That's not possible, if you would like to use this machine for Applications then the OS needs to be changed or install vmware/Microsoft Virtual PC with a Certified Operating system to be able to use Applications.
Thanks
Ronald -
I'm getting "runtime error: unknown exception" when burning DVDs on PE12
I'm getting "runtime error: unknown exception" when burning DVDs on PE12
Some of this may be for Premiere Pro, but SHOULD also help with Premiere Elements
http://helpx.adobe.com/x-productkb/global/troubleshoot-c-runtime-errors-products.html
Also http://www.microsoft.com/en-us/download/details.aspx?id=14632 for a Microsoft download
Also search http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US for Microsoft help articles
Set your Premiere Elements DVD output to a folder on your hard drive and then use the FREE Imgburn to burn the folder to disc for DVD... Premiere Elements does NOT burn to a folder for BluRay (send the author a PayPal donation if you like his program)
Read http://forums.adobe.com/thread/1322583 for notes on installing Imgburn WITHOUT any toolbar add-ons... Set Imgburn to use the slowest burn speed your drive and media will use... I set my burn speed to 1x and let Imgburn adjust to the actual minimum -
Error has occurred when running internal order report
Error has occurred when running internal order report. Last month also used this report without any error.
Error #01: [ASE Error SQL422]Too many nested expressions or logical operators to compile. Try splitting query or limiting ANDs and ORs.
Error #02: SQL Error: 422
Error #03: An error occurred while reading the data; Navigation is possible.
Please guide me to solve this issue.Please just say how you removed the CC version and did you remove the Preferences from Hidden User>Library??
https://helpx.adobe.com/lightroom/kb/preference-file-locations-lightroom-41.html
In here??
Sorry I'm trying to help but please answer the questions specifically... thanks. -
Discoverer 3.1.25: getting error ORA-06550 when scheduling report
Hello,
we are still using the Discoverer version 3 (release 3.1.25). I know that this version is out of support, but that doesn't harm use from using it...
The Discoverer has been working fine for the last couple years. At the beginning of every month the same already defined reports are getting generated. But with the beginning of the year 2010 we are getting the error:
ORA-06550: line 1, column 93:
PLS-00201: identifier 'EUL$BATCH_PACKAGE0100112082923.RUN' must be declared
ORA-06550: line 1, column 93:
PL/SQL: Statement ignored
ORA-06512: at "SYS.DBMS_JOB" line 79
The numbers "0100112082923" after the identifier "EUL$BATCH_PACKAGE" specify the date and time:
082923: 08 hour, 29 minutes, 23 seconds
0100112: 010 year, 01 month, 12 day
The reason of that error is that the mentioned Package/Packagebody EUL$BATCH_PACKAGE*0*100112082923 doesn't exist in the database. But as a matter of fact the Package/Packagebody 'EUL$BATCH_PACKAGE100112082923 does exist. The Discoverer creates the Package/Packagebody without the "0" after the identifier "EUL$BATCH_PACKAGE" in the database, but wants to use the Package/Packagebody with the "0" after the identifier "EUL$BATCH_PACKAGE". Seems like a bug to me - does anybody have the same problem?
Until the year 2009 the year was specified with just two digits (09) - now the year seems to get specified with 3 digits (010) - but in the database just two digits are used. Is there any property table or button where this gets defined?
Any help will be appreciated!Seems like if I have found the bug by myself...
In the procedure SubmitJob(...) of the package EUL$BATCH_REPOSITORY the name of the scheduled procedure gets generated with the hardcoded string
"EUL$BATCH_PACKAGE0". The zero after "PACKAGE" is only correct when the year ends with one digit (e.g. 2001, 2002, ..., 2009). When shortening the
string to "EUL$BATCH_PACKAGE" everything works fine again...
Rgds -
Error ORA-20001 when Creating an Application Express Workspcce
I have a 11.1.0.6.0 Enterprise Edition database running on a Fedora 10 box that was created using dbca. At the time, I did not select Oracle Application Express for installation. However, I can configure APEX and start it with URL http://<host>:8080/apex/apex_admin and log in as ADMIN. Looks like I'm ready to go... Database accounts APEX_PUBLIC_USER, FLOWS_030000 and FLOWS_FILES existed at the time I configured APEX.
Following the 2 Day + Application Express Developer's Guide, I get error "ORA-20001: Unable to create user. ORA-01935: missing user or role name" when I attempt to create a workspace for the demo application. In an attempt to resolve this, I've run dbca again to install Application Express in the database, and I then get "ORA-04063: package body "FLOWS_030000.WWV_FLOWS" has errors: ORA-06508: PL/SQL: could not find program unit being called: "FLOWS_03000.WWV_FLOW" ORA-06512: at line 2". DBA_OBJECTS reports table WWV_FLOWS owned by this user, but no package body of the same name.
Can anyone advise what I need to do to resolve the ORA-20001 error when I attempt to create a APEX workspace, or resolve the ORA-04063 error when I attempt to use dbca to install APEX in the database?
TIA
Jon..and show me the results, I might know what is wrong.SQL> alter session set current_schema = flows_030100;
Session altered.
SQL> select distinct provisioning_company_id from wwv_flow_companies;
PROVISIONING_COMPANY_ID
0
10
11
9.4232E+14
9.5741E+14
1.7393E+15
(I imported the file to my workspace http://apex.oracle.com/pls/otn.... it loaded succesfully but couldn't login.)
I found a site where the file might have been downloaded from:
[http://www.oracle.com/technology/products/database/application_express/packaged_apps/packaged_apps.html#CUST] -
MCOD Installation - Error ORA-1403 when accessing table SAPUSER
Hello.
We are in middle of a MCOD installation of 4.7 x 2.00 SR1 with BW 3.1 on Windows 2003/Oracle.
BW 3.1 is up and running, while 4.7 fails on R3loads.
Following are SAP000.log and SAPUSER.log files:
SAP000.log
===============================
D:\usr\sap\D11\SYS\exe\run/R3load.exe: START OF LOG: 20060507193904
D:\usr\sap\D11\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
D:\usr\sap\D11\SYS\exe\run/R3load.exe: version R6.40/V1.4
D:\usr\sap\D11\SYS\exe\run/R3load.exe -dbcodepage 1100 -i D:\Program Files\sapinst_instdir\R3E_472SR1_ABAP_NUC\DB/SAP0000.cmd -l D:\Program Files\sapinst_instdir\R3E_472SR1_ABAP_NUC\DB/SAP0000.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(DB) ERROR: DDL statement failed
(DROP TABLE "REPOLOAD")
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
DbSl Trace: ORA-406 occured when executing SQL statement (parse error offset = 0)
(DB) ERROR: DDL statement failed
(CREATE TABLE "REPOLOAD" ( "PROGNAME" VARCHAR2(40) DEFAULT ' ' NOT NULL , "R3STATE" VARCHAR2(1) DEFAULT ' ' NOT NULL , "MACH" NUMBER(5) DEFAULT 0 NOT NULL , "UNAM" VARCHAR2(12) DEFAULT ' ' NOT NULL , "UDAT" VARCHAR2(8) DEFAULT '00000000' NOT NULL , "UTIME" VARCHAR2(6) DEFAULT '000000' NOT NULL , "L_DATALG" NUMBER(10) DEFAULT 0 NOT NULL , "Q_DATALG" NUMBER(10) DEFAULT 0 NOT NULL , "SDAT" VARCHAR2(8) DEFAULT '00000000' NOT NULL , "STIME" VARCHAR2(6) DEFAULT '000000' NOT NULL , "MINOR_VERS" NUMBER(5) DEFAULT 0 NOT NULL , "MAJOR_VERS" NUMBER(10) DEFAULT 0 NOT NULL , "LDATA" BLOB , "QDATA" BLOB ) TABLESPACE PSAPD11620 STORAGE (INITIAL 0000000016K NEXT 0000040960K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 406)
error message returned by DbSl:
ORA-00406: COMPATIBLE parameter needs to be 9.2.0.0.0 or greater
(DB) INFO: disconnected from DB
D:\usr\sap\D11\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\D11\SYS\exe\run/R3load.exe: END OF LOG: 20060507193905
========================================
SAPUSER.log
==============================
D:\usr\sap\D11\SYS\exe\run/R3load.exe: START OF LOG: 20060507193834
D:\usr\sap\D11\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
D:\usr\sap\D11\SYS\exe\run/R3load.exe: version R6.40/V1.4
D:\usr\sap\D11\SYS\exe\run/R3load.exe -dbcodepage 1100 -i D:\Program Files\sapinst_instdir\R3E_472SR1_ABAP_NUC\DB/SAPUSER.cmd -l D:\Program Files\sapinst_instdir\R3E_472SR1_ABAP_NUC\DB/SAPUSER.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(DB) INFO: disconnected from DB
D:\usr\sap\D11\SYS\exe\run/R3load.exe: job completed
D:\usr\sap\D11\SYS\exe\run/R3load.exe: END OF LOG: 20060507193835
==============================================
Kindly look into it.
Thanks
KTHi KT,
Actually the problem is not ORA-1403, but the <i>ORA-00406: COMPATIBLE parameter needs to be 9.2.0.0.0 or greater</i>.
Please update the COMPATIBLE parameter in your init<SID>.ora file and restart the database. This should fix your problem.
Kind regards,
Alexander Webster
P.S. points are appreciated if my reply was helpfull.
Message was edited by: Alexander Webster
Removed typo
Maybe you are looking for
-
I just got my new MB and just want everyone not to fear buying one. I love it! No crazy fans, no overheating. It was worth the wait since I bought one in around oct-nov but returned it bc of a bad optical drive and misaligned keys that stuck. This th
-
"The disk you inserted was not readable by this computer" 10.9.3 - WD-500GB WD5000AADS
Mac Book Pro MAC OS Extended(Journaled) Capacity:97GB Version-10.9.3 Hello Mac Fam, I recently purchased a HD-Enclosure (Insignia 3.0 desktop hard disk enclosure),since my WD 500Gig Hard Drive broke(power cable broke). Before the Hard Drive broke, it
-
Ok I'm trying to order by a column which consists of numbers, which works, however, I want the high numbers at the top not the bottom. Now I know DESC works for alphabetical entries, but what works for numbers? This has to be simple. Thanks!
-
Error in Seeding Translation Text
Has anybody ever seen the following error when seeding the translation text? ORA-20001: WWV_FLOW_SEED_TRANSLATIONS.SEED_UPDATE_ERROR Following the error above, updating the translate file produces the following error: ORA-00600: internal error code,
-
Keyboard problem, 'linked' keys
Hey there, I'm having problems with the keyboard on my Mid '11 15" MacBook Pro. Some keys appear to be 'linked' to others. For example; typing a '1' also presses the 'volume up' (F12`) key. Here's some other examples (I'm only typing the numbers here