MD04- show delivery date when using a GR processing time

Hi all,
If you have a planned delivery time as well as a GR processing time on the material master- is there a way of showing the actual delivery date (from the PO) and not the total lead time (planned delivery date + GR processing date)?
Thanks in advance.
J

I think that there's a button on the bottom of MD04 labeled "GR" and switches to "AV", that you can use exactly for that, switching between the two types of lead time.
Regards,
Mario

Similar Messages

How to show all data when using more than one parameter?

Hi All,
I used a query like this to show the data in a report:
select col1, col2 // col1 and col2 are columns of tabale tab1
from tab1
where
tab1.col1 =
(case when :P_COL1 IS NOT NULL then // :P_COL1 IS A USER PARAMETER TO EQUAL COL1
:P_COL1 ELSE tab1.col1
end)
AND TAB1.COL3 =
(case when :P_COL3 IS NOT NULL then // :P_COL3 IS A USER PARAMETER TO EQUAL COL3
:P_COL3 ELSE tab1.col3
end)
The problem is when I run the report with paramters values or not, It shows the data which is not null for both col1 and col3.
That is when the value of col1 or col3 is null the report would not return that record!
I want the report to show all data not only values which is not null!
How to do this?

Rainer,
That where clause will fail when col1 in the table is null and the parameter has the dummy value. Consider the following:
variable p_col1 varchar2
exec :p_col1 := 'yourdummyvalue';
select
from
     select 'yourdummyvalue' col1 from dual
     union all
     select 'other' from dual
     union all
     select null from dual
     union all
     select 'X' from dual
) tab1
where nvl(tab1.col1,'yourdummyvalue') = nvl(nvl(:p_col1,tab1.col1),'yourdummyvalue')In this case, the query returns the row with null and the row with 'yourdummyvalue', where only the row with 'yourdummyvalue' should be returned.
You must do something like this:
where ( :p_col1 is null or ( :p_col1 = tab1.col1 ) )That one is the simplest and does not need a dummy value. Here are some other more complicated examples:
where nvl( :p_col1, 'yourdummyvalue' ) = decode( :p_col1, null, 'yourdummyvalue', tab1.col1 )or this:
where nvl( :p_col1, 'yourdummyvalue' ) = nvl2( :p_col1, tab1.col1, 'yourdummyvalue' )In the last 2 cases, it will not matter if the dummy value exists in the data, but they are unnecessarily complex.
Kurz

Purchase Order Report Showing Delivery Date

Hello All
I am looking for a report which will show Purchase orders with delivery date . something like ME2N but it is not showing delivery date.
Regards
Yogesh

Hello Guys
Thanks for your answers but it seems no body have checked it.
Vishal : I am looking for a standard report and not table.
Ranga : In SPRO field delivry date in not there under new scope of list
Chidanand: Boss ALLES not giving delivery date.
Please tell me some other way.
regards
Yogesh

How can forbid changing data when using BAPI 'BAPI_MATERIAL_SAVEREPLICA'?

I am using BAPI 'BAPI_MATERIAL_SAVEREPLICA' to creat material master data in batch.
But this BAPI also can be used for change mode.
How to forbid the change of MAT data when use this BAPI?
TKS a lot~~
I am looking foward to your response~~~

you have to find out what the user did before your program goes ahead and starts the BAPI.

How can forbid changging data when using BAPI 'BAPI_MATERIAL_SAVEREPLICA'?

I am using BAPI 'BAPI_MATERIAL_SAVEREPLICA' to creat material master data in batch.
But this BAPI also can be used for change mode.
How to forbid the change of MAT data when use this BAPI?
TKS a lot~~
I am looking foward to your response~~~
Edited by: lorryhappy on Dec 22, 2009 11:35 AM

Hi
You can achieve it in another way..
Before Passing Data to BAPI , Check whether the material is existing or not..
If material is existing (Present in Material Master Tables e.g. MARA ) using
data: l_matnr like mara-matnr.
Select single matnr from mara into l_matnr.
IF sy-subrc EQ 0.
" Material is existing ==> Do Not Pass to BAPI
else.
" Material is NOT existing ==> Pass to BAPI for creation.
endif.
Repeat above logic for every material in batch..
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya

Calculating PO Delivery Date when created from PR

Hi,
When a PO is created with reference to a PR, the "delivery date" is copied from the PR. However, if the PR has been unprocessed for 7 days, the delivery date is now effectively old.
So is it possible to change the settings so that instead the delivery date is always calculated from lead time either in PIR or material master, so it is always accurate.
For example:
Requisition created on 1st July for delivery 1st Aug based on lead time.
PO created after 1 week - on 8th July - delivery date in PO is 1st Aug - unless changed prior to printing manually.
Please advise,
Thanks.

do you really think that this is the way to improve the situation.
Instead of changing SAP, you should speed up your buyers.
If the material is needed on August 1st.
Then the delivery date of august 1st + 7 day for sleeping buyers does not meet the requirements of the planner.
Maybe you should think about extending the lead time with the sleep time (purchasing processing time), so MRP can plan more accurate the next time.

Does verizon selects collect data when using wifi ?

When signing up for verizon selects is states it collects data when using wireless service but does it collect data when using home wifi which is not verizon?

I'm not sure why one would want to participate in this program but if one is weary about it I for sure wouldn't use it.

Apple Watch order status says processing items. Shows delivery date of 4/24-5/8? Is this normal?

Apple Watch order status says processing items. Shows delivery date of 4/24-5/8? Is this normal?

I read that Sport Space Grey models (black band) are not among first to be shipped whereas Sport Aluminum White band is shipping. This could also be anecdotal. Time will tell. As said here, no one promised 4/24 delivery.
Looking forward to it, though.

Has anyone had issues with poor image quality when using lightroom to process raw images from Canon 7dmk2

Hi everyone..
..I have been having image quality issues when using Lightroom to process raw files from a 7d mk2... They are all soft with poor clarity.....tonight in despair I tried processing them using canon's software and they are totally different..."much better"
anyone else had similar problems....Andy

I have a 7D2 and have not had what I interpret as poor image quality that has anything to do with the camera.
Can you post a screenshot of what you’re seeing and what specifically you don’t like? Maybe there is something you can do differently or at least there may be an explanation for what you’re seeing.
And if you have a raw image that you wouldn’t mind sharing in a public forum, upload to http://www.dropbox.com/ then post a public share link to it in a reply, here.
In other words post a screenshot of what you see in LR, another of what you see using DPP, and a link to the raw file you’re processing.

I have a new mac book pro/LION and can't access my back up data when I click on "enter time machine". I need the back up data that I could access on my old mac book pro (that is now broken). Tnx so much

I have a new mac book pro/LION and can't access my back up data when I click on "enter time machine". I need the back up data that I could access on my old mac book pro (that is now broken). I can only access time machine back up data that I've obtained since starting the new mac book pro. Tnx so much

Try doing a click-and-hold on the Time Machine icon in the Dock, then select "Browse Other Time Machine Disks".
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

How to sync/edit audio when using frame freeze or time remapping?

how to sync/edit audio when using frame freeze or time remapping? in premiere pro cs6

You need to give more information about what you want to happen to the audio when you freeze or time remap the associated video.
Is it synch video?
Is it music?
Is it Voice?
Generally .. you have to cut and design the audio around the video effect.

JComboBox only show 10 items data when using DataBinding

JComboBox only show 10 items data when binding to one table more then 10 lines. List Binding Mode is "Navigation Mode".
JComboBox's property "maximaxRowCount" is seted to 30, but still display 10 items.
some code:
private JComboBox jComboBox2 = new JComboBox();
jComboBox2.setModel((ComboBoxModel)panelBinding.bindUIControl("ChartView2", jComboBox2));
ps. Table "Chart" has 35 lines.
JDeveloper 10g(Version 10.1.2.0.0 Build 1811)

I am encountering the same problem. I tested the binding VO in the Business Component Browser, it's fetching the correct result set.
Any suggestion would be greatly appreciated!
Stephanie

How to show delivery date in Bex Analyzer

Hi Gurus!
I have to create a report in logistic scenario and my client wants that the report shows a column with the "Scheduled delivery date". I don't know how to show it in a column because in my KF structure, I can't put just this time characteristic.
Does anybody know how can I solve it?
Many thanks!

Hi,
Create a Formula Variable on Scheduled DeliveryDate with processing as replacement path, replace variable with InfoObject, replace with Key and use it in the new formula in the columns.
in this way query designer will accept you to use the char as in column,
hope it helps you.
Regards
Reddy A

How to change the requested delivery date when approval has been done

Hi
We use SRM5.0 and we want to implement SC, now we want to make it possible to change the delivery date in the shopping cart when we approve.
This is needed if we request today but the approver didn't approve same day, therefore the requested day has to move the same number of days, that the approver has spend. Or else the deliver date will not be correct.
Do any of you know how to do this??
Best regards
Jakob

Hi Jakob,
What scenario do you use? Classic, Extended Classic, Standalone?
So depending on your scenario you can have differente types of follow-on documents (PR/PO only in ERP in case of Classic, or PO in SRMand ERP in case of Extended Classic).
Do you use Sourcing Cockpit?
I've tested this scenario in SRM 7.0 Standalone and if the follow-on document (in my case, a PO) is not "Ordered" yet then I can change the SC. But if it is already "Ordered", I can't change the SC. This is standard behavior.
You could use Sourcing Cocking to solve this issue, in this you don't use it yet.
Best regards,
Christian Zeuch

PO Delivery date change using IDOC type "PORDCR101"

Hi All,
I am trying to create a PO using idoc type "PORDCR101". Everything is fine, PO is getting created. But the problem is that, even if I pass delivery date at item level system is automatically changing delivery date to future date (some of the PO's have delivery date in past and they need to be created as it is).
I am populating all the required fields (PO_ITEM, SCHED_LINE, DEL_DATCAT_EXT, DELIVERY_DATE, QUANTITY, STAT_DATE) in both the segements "E1BPMEPOSCHEDULE" and "E1BPMEPOSCHEDULEX" (in this segement with X). It's updating the quantity exactly with what I am passing, but it's not considering delivery date. But when I am creating PO manually using ME21N I am able to set delivery date to past date.
E1BPMEPOSCHEDULE
PO_ITEM=20
SCHED_LINE=0001
DEL_DATCAT_EXT=1
DELIVERY_DATE=20060509
QUANTITY=101584
STAT_DATE=20060509
E1BPMEPOSCHEDULEX
PO_ITEM=20
SCHED_LINE=0001
PO_ITEMX =X
SCHED_LINEX=X
DEL_DATCAT_EXT=X
DELIVERY_DATE=X
QUANTITY=X
The funny part is IDOC is not even thowing a warning message for this...
Any idea what I am missing???
Thanks for your time.
Paul
null

Ok, I got the answer. For delivery date category (DEL_DATCAT_EXT) we should not be passing 1, but we have to convert it into 'D' (And relevant format for others).

MD04- show delivery date when using a GR processing time

Similar Messages

Maybe you are looking for