MDG Processing and Activity within a change request

We are receiving the error below when executing an activty within a change request in MDG.
I have looked through all of the configuration documentation with no luck. Any ideas?
Error
URL incorrect
Connection could not be established
Thanks

Hi Christopher,
I've never seen this error before. Maybe you should raise a OSS message for that?!
Best regards
Michael

Similar Messages

  • MDG-F: Error when opening the Change Request

    Hi MDG Experts
    In MDG-Finance, when i'm opening the Change Request (CR Type: 0G_S002), to "finalize processing", i get this error message: "Object ID 060822EA65231EE3A7DB2A05A0AB8E61 is not valid". As a result the single processing option does not pull the master record that was added in the Create Change Request option for submitting for approval.
    I'm not sure what this error is and how to resolve it.
    Seeking your help.
    Thanks in advance.
    Regards
    Neelesh

    Hi Kiran
    Thanks for your prompt response. The entity search option that you mentions works successfully.
    However, in case of manual replication, i'm still facing a challenge.
    After executing the Manual replication option, the data isn't getting replicated to back-end ECC. Infact, in DRFLOG, the log is all green for "Process Outbound implementation GL Master Idoc (1012)".
    Am i missing something here ?
    Regards
    Neelesh

  • ChaRM : Update decision date and implementation date in Change request doc.

    Hi,
    I've created change request document from support message document.Then change document was created when i authorize the change request document.
    When  Change request document is created, decision date and implementation date is empty.
    1.How can i configure the decision date to be automatically capture when change manager have authorize the change request?
    2.How can i configure implementation date to be automatically capture when change document have been confirmed?
    regards,
    Biah

    Hi,
    Go to the transaction code MASS  and enter the OBJECT  TYPE as BUS2032 and enter
    It will lead you to the next screen where you can find the  Table and Field TABS
    Select the  SALES ORDER HEADER DATA  and choose the fields data and choose the fields PRICING DATE and BILLING DATE  and execute
    In the subsequent screen you can see the selection screen where you can enter all the Sales documents for which you want to change
    Key in all the documents and execute
    Now change the date as per your requirement and check the effect
    regards,
    santosh

  • How to include Change Request Title and Description in Approval email

    Trying to figure out how to include the title and description of a Change Request in the email that goes to the managers when they approve it. Below is what we have now in the email template.
    Change request $Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' SeedRole='Target' TypeConstraint='WorkItem!System.WorkItem']/Property[Type='WorkItem!System.WorkItem']/Id$: $Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity'
    SeedRole='Target' TypeConstraint='WorkItem!System.WorkItem']/Property[Type='WorkItem!System.WorkItem']/Title$, created by $Context/Path[Relationship='WorkItem!System.WorkItemCreatedByUser' TypeConstraint='System!System.User']$?$DisplayName$?, requires your
    approval.
    You can complete this request by replying to this message with [Approved] or [Rejected] in your message body (note the brackets).
    Alternatively, you can complete the request by looking up Review Activity $Context/Property[Type='WorkItem!System.WorkItem']/Id$ under the Activity Management views in the Service Manager Console and manually approving or rejecting it there.
    This basically translates to:
    Change request CR#: Test Change Request, created by TestUser1, requires your approval.
     You can complete this request by replying to this message with [Approved] or [Rejected] in your message body (note the brackets).
    Alternatively, you can complete the request by looking up Review Activity RA# under the Activity Management views in the Service Manager Console and manually approving or rejecting it there.
    When I click on Insert, there is a huge list of items and sub-items with all kinds of properties and I don't know what to select.
    The Targeted Class of the template is Activity

    $Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' SeedRole='Target'
    TypeConstraint='WorkItem!System.WorkItem']/Property[Type='WorkItem!System.WorkItem']/Title$
    This translates to the Title of the CR (given that the targeted activity is contained in a CR). Simply replace
    Title with Description.
    Also if the Change Manager can approve a CR just by the description you have bigger issues (or just putting everything in the description). What about a reason? Implementation
    plan, rollback plan, testing, etc.?
    http://codebeaver.blogspot.dk/

  • HCM Process and Forms - Changes to Form Issue

    We have a scenario within HCM processes and forms where the changes being made by an intermediate approval step is not being sent to the next level approver.  For example, in a pay change the initiating manager sends the pay change to his/her boss for approval, then once approved the form is sent to HR for final approval and update into R/3.
    In this scenario the initiating manager starts the process and makes appropriate updates to the form (including comments).  This then routes to that manager's manager for updates/approval.  When processing the form, the approving manager can see the information input by the initiating manager.  The approving manager then has the opportunity to make appropriate changes within the form and add comments before it is approved and sent to HR for final approval.
    Once the approving manager makes changes and sends this to HR, when HR processes the form they see the changes as if it was sent by initiating manager (HR does not see the changes made by the approving manager).
    I appreciate any insight you may have on this issue.
    Regards,
    Brad

    Sounds like you process is designed incorrectly and your are having problems with your process object integrity. You need to be careful with loops/branches when designing your process. Are you doing it all in the same Form Scenario and just using multiple steps? The form scenario will "share" the "data" hence you can have issues. You can split it to a differnt form scenario and pass the data over from the other FS to your FS. Then you know you will have your own data there. I often see people trying to do their whole process within one form scenario and use multiple steps without realizing the data integrity issues with that.
    Hope this helps.

  • How big effort it is to setup Change Request Management?

    We are interested in implementing Change Request Management into our Solution manager 7.0.
    What size of an effort in mandays it actually is and what kind of professional roles are required to set it up? Some background information for your responses:
    implementation project is already there in Solman (SOLAR01/02) and is already live
    satellite system connections within SMSY are already active
    no central CTS/CTS+ is currently in use
    when having CHARM it is assumed that also CTS+ should be used
    So, I guess we are in a typical situation where implementation project has ended and live and support organisation and tools are being setup. There we need CHARM and CTS+.
    I have read lots of SDN threads and blogs, but did not get a clear picture how big effort setting up CHARM is. Please note, I not looking for config guides now, just your experiences. Even if am not interested in config guides, could you at least describe the main steps that are necessary in setting up CHARM?
    br Kim

    Hi
    Adding more to it
    Use the following link,
    /people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
    https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
    Regular correction
    https://websmp202.sap-ag.de/~sapidb/011000358700000086572008E.sim
    Later login to solman enter tcode SPRO and goto scenario specific Change Request management node and start configuring by
    going through the IMG Help and as per requirement.
    Create a maintenance project and Activate Charms
    https://websmp202.sap-ag.de/~sapidb/011000358700005479242006E.sim
    Regards
    Uday

  • Add new system to an Existing project in Change Request in Solution Manager

    HI,
    Is it ok to add new systems and remove systems to an existing Project in Solution Manager with Change Request Management activated?
    Currently, Change request is already set-up in our solution landscape, however, a new BI Dev and QA systems were created to replace the old Dev and QA systems that was initially set-up in our Charm. Can you please share with me the steps that I need to do to successfully remove old Dev and QA from Charm and replace them with the new systems? Is it safe to do this in an open project and maintenance cycle?
    Thanks!

    Hello,
    Please, check the topic "6. Changes in the logical components of a project where Charm is already activated" of the link below:
    /people/dolores.correa/blog/2009/07/22/change-request-management-scenario-usual-questions-and-known-errors
    I think that this link can help you.
    Best Regards,
    Diego Fischer

  • No change request created when applying OSS Note

    Hi,
    I have applied around 3 OSS Notes to my ECC 5.0 system. I got a promt for the change request creation. I have created a new change request and then saved it.
    But when I applied the next 2 OSS Notes, i didn't get any prompt to create or select the existing request.
    How can I create a change request for this application of OSS Notes and how to transport them to quality if i dont have a request number?
    Thanks
    Vijay

    Hi Vijay,
    I think this is normal if the objects being changed by the OSS Note are already held in an earlier change request owned by you (or others) and has not been released.
    Use transaction SE03 to search for the objects being changed by the OSS Notes (you will get object name in the note itself) and find out which change request is holding the object.
    Once you find the change request either unlock it or release it (depending on your company process/policies) and then re-implement the OSS Note.
    Hope that helps.
    Regards,
    Siddhesh

  • Change Request from Email

    Is it possible to create CR from email? I need some operations convert to CR instead of incident, for examle i need such user requests like asking for new work plase or upgrage the computer to be CR at the begining when they send email, but now an incidents
    are created for such typical user requests by default.

    As far as I know it's not possible to create a change request by mail in SCSM 2010.
    In my opinion from the process perspective it didn't make sense to do that anyway:
    For a change request you need some more information like "which type of CR -> minor change, major change, ... Most of the users didn't know which type of CR is needed. Depending on the type of the CR there might be completly different activities behind
    a CR. E.g. also risk and impact of a change the users didn't know.
    For that reason I would always go for a process like this: User opens an incident by mail with his "wishes". Incident management process is deciding if the request should be handled as a change request and which type of change request would
    fit. Incident management opens a corrosponding and related change request. 
    Andreas Baumgarten | H&D International Group

  • Check change request

    Hi,
    I have to execute workflow after creatiion of change request. I have built workflow but while testing it, workflow is unable to trigger. I checked event related transactions for workflow and it is showing correct data in it. I dont know whether change  request is created or not. Can you please help me on this ?

    Hi All,
    I have to assign role SAP_MDGS to the user who can create the change request.
    Go to transaction PFCG, and display the above role which has been assigned to the user.
    then Go to Menu tab and execute CreateSupplier from
    Role Menu -> Supplier Governance -> Process Supplier.
    Now thwe change request will be generated properly and the associated workflow is triggered successfully.
    Thanks for all your replies.

  • Change request management in solution manger release 7.1 or 7.0

    Hi All,
    Can any body please explain me how to configure change request management in solman release7.1 and if it is possible please send document to my below maild Id.
    And please let me know what are the steps needs to be done satellite systems, we have EP7.0 landscape also there .do we have to do any additional configuration for that in solman side?
    I appreciate for your prompt response
    Thanks in advance
    My Id: haritechies gamil.com
    Regards,
    Hari Prasad . L

    Hi
    Adding more to it
    Use the following link,
    /people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
    https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
    Regular correction
    https://websmp202.sap-ag.de/~sapidb/011000358700000086572008E.sim
    Later login to solman enter tcode SPRO and goto scenario specific Change Request management node and start configuring by
    going through the IMG Help and as per requirement.
    Create a maintenance project and Activate Charms
    https://websmp202.sap-ag.de/~sapidb/011000358700005479242006E.sim
    Regards
    Uday

  • Change Request Flow In a Three System Landscape --- PLZ DO REPLY

    Hi Experts,
    I am new to SAP and have this doubt;
    Suppose we have a three system landscape with DEV, QTY and PRD systems in it.
    Say we create a new change request in DEV system. So to transport it to QTY we will release that request from DEV using T code se01 .
    Now the request will come in QTY systems queue and we will login to the appropriate QTY client and import this request into the QTY system.
    <b>No my basic doubt is, after the testing in QTY how do we move this request to PRD system ?</b>
    Do we again release this request from QTY system using se01 or we need to go at the OS level in the QTY system and manually add this change request in the PRD system buffer ? ( Please send if any reference link is there)
    I will really appreciate any info in this regard.
    Thanks in advance.
    Regards,
    Mandeep

    Hai Mandeep,
        First Thing,
        -->If you are maintaining a common transport directory,the released change
           request will be exported in that common transport directory..
        --->Now you just enter in to the server(which is Transport Domain
            Controller).
        --->In that go to Import Overview,now your QA server has one import req.
            you just click the req. and import that req..
    >Now if you want to import the same req int o PRD.,Enter in to PRD
             server.Go to tcode STMS_IMPORT, In the top go to
               Extras>Other req.>add..click this and add that particular 
             req.that you want to import in to PRD server..
        --->select that req and import that req...
    Thanks & Regards,
    Gopinathan.T

  • Local change requests being created for changing package info

    Hi experts,
                     After a client copy of object into a new server whenever changes are being made to these objects local change requests are being created. i found that the above behaviour is because of the transport layer in the package, which was also copied during client copy, is of the old server. And when that was change to the one available in the new server the change to the package also got created as local change request. Now I wan this package to get transported to quality from development ( where the change was made). Please help.

    Hi,
         Thank you for your suggestion. I Created a Tp copy and included the local change requests in them and gave target system as quality system. There were 2 requests as local change requests, only one of them took the intended change in the quality but for the other the change made in the development system was not refelecting in the quality system.

  • Change Request object

    Hi all,
    I have two development classes(packages) A and B. And I created 2 change requests for the 2 packages A and B. If I change something and try to save, it will ask me for the change request. Then even if I choose the wrong change request, the change will take place into that change request.
    But I want to restrict this. i.e. If I select the wrong change request , it should give some error/warning message. Can you please suggest me on this.
    Regards,
    Balakrishna.N

    That's why only I am trying to do it. It has user exits know. Is there any possibility to do the needed thing there itself.
    Thanks and Regards,
    Balakrishna.N

  • Changing of iBase in Change Requests and Corrections being processed

    Good day!
    After going SP18 with Solution Manager our iBase component system has gone "mad": number for productive ERP-system has changed several times.
    Because of this change, a number of already approved change requests and corrections in processing can't be modified correctly. I can't change their status by regular operations from system document. Multiple correction/ change request change also won't work. And I can't change the iBase component in this documents, because the field is read only.
    How can I close all Change Requests and corrections with old iBase component number?
    Is there a way to change the iBase number in already approved Change Requests and Corrections, so i can perform operations with this system documents.

    Hello Raguraman!
    Thank you for your answer.
    Anyway I implemented the note to which you refer, and still can't change iBase component in corrections and change requests which are in process. The "iBase/Component" field is still read only and contains components which do not exist anymore.
    Do you know how can I change this values?

Maybe you are looking for