MDIS failed to generate the Log file!!!

Hello All,
Having a issue where MDIS is not generating the log file..
The scenario is something like this-
The files are getting archived and the records not flowing into MDM
Basis team says-
2014-06-30T14:11:33.339,47083231971072,24,"[MDS=sapdpm1 Repository=REAL_ESTATE ClientSystem=MDM_REAL_ESTATE Port=Building]: Nigerian Building updates part 2 - SLKDDY.txt is empty, the file will be skipped
But the source file was having data it was not empty(bit strange!!)
Also its not generating the LOG to analyze
Regards,
Girish

Hi Shenoy,
Let me explain the scenario--
User uploads the file through Portal and through FTP records resides in MDM...the issues is when i tried to import through IM it worked and i tried manually push file through Filezilla FTP it worked.
But when we upload file through portal, the file resides in Archive and generating the message-
2014-06-30T14:11:33.339,47083231971072,24,"[MDS=sapdpm1 Repository=REAL_ESTATE ClientSystem=MDM_REAL_ESTATE Port=Building]: Nigerian Building updates part 2 - SLKDDY.txtis empty, the file will be skipped
But the file is having data.
Regards,
Girish

Similar Messages

Idoc types that generate the log files

Hi All,
Can anybody provide me the list of IDOC types that generated application log files.
As I found that material master IDOCs generate log files. Is there IDOC types other
than material master that generate log files.
Regards,
Azra.

Hi Azra,
You can tell whether an IDOC does create the application log from the function module it uses.
Go to SE37, and type in IDOC_INPUT_<message_type> for inbound or IDOC_OUTPUT_<message_type> for outbound, and search for any function module which start with 'BAL_'. If you can find it, then it creates application log files.
Regards,
Lim...

ERROR BPMA File Generator Failed to generate the EPMA import file

Hi,
I am facing the below error while extracting the metadata from the Planning Application using EPMA File Generator.
ERROR BPMAFileGenerator Failed to generate the EPMA import file...
Details:The remote server returned an error: (404) Not Found
I am getting 0 byte file.Pls suggest.
Is there any other way to extract the Planning application metadata?
The log is:
[Header]\r\n2010-08-23 14:24:54,484 [5900] DEBUG BPMAFileGenerator Initializing Component
2010-08-23 14:24:55,687 [5900] DEBUG BPMAFileGenerator HyperionHome: D:\Hyperion
2010-08-23 14:24:55,687 [5900] DEBUG BPMAFileGenerator HelpFile: D:\Hyperion\common\docs\en\epma\file_generator\launch.html
2010-08-23 14:27:42,309 [5900] INFO BPMAFileGenerator SelectedTabIndex: 3
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hfmWorkspaceURL.Text: http://localhost:19000/workspace
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hfmWebServer.Text: http://localhost/HFM
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hfmUserName.Text:
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hfmApplicationName.Text:
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hfmClusterName.Text:
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hpWorkspaceURL.Text: http://lgwapp081.uk.baa.com/workspace/index.jsp
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hpWebServer.Text: http://lgwapp081.uk.baa.com:8300/HyperionPlanning/
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hpUserName.Text: admin
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hpApplicationName.Text: PLNAPP
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hpClusterName.Text: lgwapp081.uk.baa.com
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hpBPMAImportFileName.Text: C:\Documents and Settings\lgwappharrisonb-gal\My Documents\EPMAImport.ads
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hfmWorkspaceURL.Text: http://localhost:19000/workspace
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator ShfmWebServer.Text: http://localhost/HFM
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hfmUserName.Text:
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hfmApplicationName.Text:
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hfmClusterName.Text:
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hfmBPMAImportFileName.Text:
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator bpmaApplicationName.Text:
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator bpmaUserName.Text:
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator bpmaWebServer.Text : http://localhost/hyperion-bpma-server
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator bpmaImportFileName.Text:
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator profileFileName.Text:
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator securityFileName.Text :
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator metadataFileName.Text:
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator hfmFilesImportFileName.Text :
2010-08-23 14:27:42,324 [5900] INFO BPMAFileGenerator dimensionPrefix.Text:
2010-08-23 14:27:42,793 [5900] ERROR BPMAFileGenerator Failed to generate the EPMA import file...
Details:The remote server returned an error: (404) Not Found.
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator SelectedTabIndex: 3
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hfmWorkspaceURL.Text: http://localhost:19000/workspace
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hfmWebServer.Text: http://localhost/HFM
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hfmUserName.Text:
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hfmApplicationName.Text:
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hfmClusterName.Text:
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hpWorkspaceURL.Text: http://lgwapp081.uk.baa.com/workspace/index.jsp
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hpWebServer.Text: http://lgwapp081.uk.baa.com:8300/HyperionPlanning/
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hpUserName.Text: admin
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hpApplicationName.Text: PLNAPP
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hpClusterName.Text: lgwapp083.uk.baa.com
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hpBPMAImportFileName.Text: C:\Documents and Settings\lgwappharrisonb-gal\My Documents\EPMAImport.ads
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hfmWorkspaceURL.Text: http://localhost:19000/workspace
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator ShfmWebServer.Text: http://localhost/HFM
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hfmUserName.Text:
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hfmApplicationName.Text:
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hfmClusterName.Text:
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hfmBPMAImportFileName.Text:
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator bpmaApplicationName.Text:
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator bpmaUserName.Text:
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator bpmaWebServer.Text : http://localhost/hyperion-bpma-server
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator bpmaImportFileName.Text:
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator profileFileName.Text:
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator securityFileName.Text :
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator metadataFileName.Text:
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator hfmFilesImportFileName.Text :
2010-08-23 14:28:54,198 [5900] INFO BPMAFileGenerator dimensionPrefix.Text:
2010-08-23 14:28:56,651 [5900] ERROR BPMAFileGenerator Failed to generate the EPMA import file...
Details:The remote server returned an error: (404) Not Found.
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator SelectedTabIndex: 3
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hfmWorkspaceURL.Text: http://localhost:19000/workspace
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hfmWebServer.Text: http://localhost/HFM
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hfmUserName.Text:
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hfmApplicationName.Text:
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hfmClusterName.Text:
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hpWorkspaceURL.Text: http://lgwapp081.uk.baa.com/workspace/index.jsp
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hpWebServer.Text: http://lgwapp081.uk.baa.com:8300/HyperionPlanning/
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hpUserName.Text: admin
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hpApplicationName.Text: PLNAPP
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hpClusterName.Text: lgwapp083.uk.baa.com
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hpBPMAImportFileName.Text: C:\Documents and Settings\lgwappharrisonb-gal\My Documents\EPMAImport.ads
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hfmWorkspaceURL.Text: http://localhost:19000/workspace
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator ShfmWebServer.Text: http://localhost/HFM
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hfmUserName.Text:
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hfmApplicationName.Text:
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hfmClusterName.Text:
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator hfmBPMAImportFileName.Text:
2010-08-23 14:30:10,150 [5900] INFO BPMAFileGenerator bpmaApplicationName.Text:
2010-08-23 14:30:10,165 [5900] INFO BPMAFileGenerator bpmaUserName.Text:
2010-08-23 14:30:10,165 [5900] INFO BPMAFileGenerator bpmaWebServer.Text : http://localhost/hyperion-bpma-server
2010-08-23 14:30:10,165 [5900] INFO BPMAFileGenerator bpmaImportFileName.Text:
2010-08-23 14:30:10,165 [5900] INFO BPMAFileGenerator profileFileName.Text:
2010-08-23 14:30:10,165 [5900] INFO BPMAFileGenerator securityFileName.Text :
2010-08-23 14:30:10,165 [5900] INFO BPMAFileGenerator metadataFileName.Text:
2010-08-23 14:30:10,165 [5900] INFO BPMAFileGenerator hfmFilesImportFileName.Text :
2010-08-23 14:30:10,165 [5900] INFO BPMAFileGenerator dimensionPrefix.Text:
2010-08-23 14:30:11,275 [5900] ERROR BPMAFileGenerator Failed to generate the EPMA import file...
Details:The remote server returned an error: (404) Not Found.
[Footer]\r\n[Header]\r\n2010-08-24 14:50:12,606 [10620] DEBUG BPMAFileGenerator Initializing Component
2010-08-24 14:50:13,528 [10620] DEBUG BPMAFileGenerator HyperionHome: D:\Hyperion
2010-08-24 14:50:13,528 [10620] DEBUG BPMAFileGenerator HelpFile: D:\Hyperion\common\docs\en\epma\file_generator\launch.html
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator SelectedTabIndex: 3
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hfmWorkspaceURL.Text: http://localhost:19000/workspace
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hfmWebServer.Text: http://localhost/HFM
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hfmUserName.Text:
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hfmApplicationName.Text:
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hfmClusterName.Text:
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hpWorkspaceURL.Text: http://lgwapp081.uk.baa.com/workspace/index.jsp
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hpWebServer.Text: http://lgwapp081.uk.baa.com:8300/HyperionPlanning/
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hpUserName.Text: admin
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hpApplicationName.Text: PLNAPP
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hpClusterName.Text: lgwapp081.uk.baa.com
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hpBPMAImportFileName.Text: C:\Documents and Settings\lgwappharrisonb-gal\My Documents\EPMA\EPMAImport.ads
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hfmWorkspaceURL.Text: http://localhost:19000/workspace
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator ShfmWebServer.Text: http://localhost/HFM
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hfmUserName.Text:
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hfmApplicationName.Text:
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hfmClusterName.Text:
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator hfmBPMAImportFileName.Text:
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator bpmaApplicationName.Text:
2010-08-24 14:53:26,415 [10620] INFO BPMAFileGenerator bpmaUserName.Text:
2010-08-24 14:53:26,431 [10620] INFO BPMAFileGenerator bpmaWebServer.Text : http://localhost/hyperion-bpma-server
2010-08-24 14:53:26,431 [10620] INFO BPMAFileGenerator bpmaImportFileName.Text:
2010-08-24 14:53:26,431 [10620] INFO BPMAFileGenerator profileFileName.Text:
2010-08-24 14:53:26,431 [10620] INFO BPMAFileGenerator securityFileName.Text :
2010-08-24 14:53:26,431 [10620] INFO BPMAFileGenerator metadataFileName.Text:
2010-08-24 14:53:26,431 [10620] INFO BPMAFileGenerator hfmFilesImportFileName.Text :
2010-08-24 14:53:26,431 [10620] INFO BPMAFileGenerator dimensionPrefix.Text:
2010-08-24 14:53:26,884 [10620] ERROR BPMAFileGenerator Failed to generate the EPMA import file...
Details:The remote server returned an error: (404) Not Found.
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator SelectedTabIndex: 3
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hfmWorkspaceURL.Text: http://localhost:19000/workspace
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hfmWebServer.Text: http://localhost/HFM
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hfmUserName.Text:
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hfmApplicationName.Text:
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hfmClusterName.Text:
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hpWorkspaceURL.Text: http://lgwapp081.uk.baa.com/workspace/index.jsp
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hpWebServer.Text: http://lgwapp081.uk.baa.com:8300/HyperionPlanning/
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hpUserName.Text: admin
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hpApplicationName.Text: PLNAPP
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hpClusterName.Text: lgwapp083.uk.baa.com
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hpBPMAImportFileName.Text: C:\Documents and Settings\lgwappharrisonb-gal\My Documents\EPMA\EPMAImport.ads
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hfmWorkspaceURL.Text: http://localhost:19000/workspace
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator ShfmWebServer.Text: http://localhost/HFM
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hfmUserName.Text:
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hfmApplicationName.Text:
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hfmClusterName.Text:
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hfmBPMAImportFileName.Text:
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator bpmaApplicationName.Text:
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator bpmaUserName.Text:
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator bpmaWebServer.Text : http://localhost/hyperion-bpma-server
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator bpmaImportFileName.Text:
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator profileFileName.Text:
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator securityFileName.Text :
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator metadataFileName.Text:
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator hfmFilesImportFileName.Text :
2010-08-24 14:56:46,427 [10620] INFO BPMAFileGenerator dimensionPrefix.Text:
2010-08-24 14:56:47,520 [10620] ERROR BPMAFileGenerator Failed to generate the EPMA import file...
Details:The remote server returned an error: (404) Not Found.
Thanks,
BC

Yes I tried to run it on server but still getting the same error.The Status message is:
1 Validating EPMA import file Successful...
2 Generating EPMA file Failed to generate the EPMA import file...
Details:The remote server returned an error: (404) Not Found.

Where can I file the log file generate by RMAN using EM 10g.

Hi
I trying to find the log file that is generated using RMAN invoked from EM.
I can only see the file using Internet Explorer with the URL:
em/console/database/rec/bkpMgmt?skey=257&type=oracle_database&target=isatprod.dla_dns.com&event=showJobDe
But I need to find where the log files are located in the filesystem because in other server I will not have EM with OC4J.
Thanks.
Juan.

When use OEM for 10g and choose the option / Maintance/Backup Reports
I can see information of all my backups, that includes:
Backup Name - Start Time - Time Taken - Status - Type- Output Devices - Input Size .....
When I click on Status field I can see the log file of this Backup.
(whe click in status one URL will be invoked ,something like below URL)
http://10.5.0.86:1158/em/console/database/rec/bkpMgmt?skey=259&type=oracle_database&target=isatprod.dla_dns.com&event=showJobDet&objType=jobDtl
So the log file exist in any place for every backup made , the problem that I can not find it.
The log has approximately 500 lines, if you want I can send you by email the log.
Currently I don't have a repository catalog, I use a control file as repository.
I think that 500 lines of log is not include in any dynamic performance views.
Thanks
Juan

Data adapter failed during OnLoad: The UDC file contains errors: '=' is an unexpected token. The expected token is ';'.

I am working on SharePoint 2010 Infopath form, i have created one secondary connection to SharePoint List view using XML Connection it works fine.
For the deployment from DEV to PROD i converted this connection to universal data connection (UDC) and tested this before deploying to PROD but i m getting below error.
An error occurred querying a data source.
i checked ULS logs and found below details
Data adapter failed during OnLoad: The UDC file contains errors: '=' is an unexpected token. The expected token is ';'. Line 17, position 108.
UDC file is below
<?xml version="1.0" encoding="UTF-8"?>
<?MicrosoftWindowsSharePointServices ContentTypeID="0x010100B4CBD48E029A4ad8B62CB0E41868F2B0"?>
<udc:DataSource MajorVersion="2" MinorVersion="0" xmlns:udc="http://schemas.microsoft.com/office/infopath/2006/udc">
<udc:Name>LastItemID</udc:Name>
<udc:Description>Format: UDC V2; Connection Type: XmlQuery; Purpose: ReadOnly; Generated by Microsoft InfoPath 2010 on 2014-04-25 at 16:49:31 by DOMAIN\username.</udc:Description>
<udc:Type MajorVersion="2" MinorVersion="0" Type="XmlQuery">
<udc:SubType MajorVersion="0" MinorVersion="0" Type=""/>
</udc:Type>
<udc:ConnectionInfo Purpose="ReadOnly" AltDataSource="">
<udc:WsdlUrl/>
<udc:SelectCommand>
<udc:ListId/>
<udc:WebUrl/>
<udc:ConnectionString/>
<udc:ServiceUrl UseFormsServiceProxy="false"/>
<udc:SoapAction/>
<udc:Query>https://contoso/_vti_bin/owssvr.dll?Cmd=Display&List={32364DED-7FE3-4276-837C-F2AC62C04B81}&View={804CC528-34B2-4473-89DB-C4E766CACC95}&XMLDATA=TRUE&NOREDIRECT=TRUE</udc:Query>
</udc:SelectCommand>
<udc:UpdateCommand>
<udc:ServiceUrl UseFormsServiceProxy="false"/>
<udc:SoapAction/>
<udc:Submit/>
<udc:FileName>Specify a filename or formula</udc:FileName>
<udc:FolderName AllowOverwrite=""/>
</udc:UpdateCommand>

</udc:ConnectionInfo>
</udc:DataSource>
w: sandippatilblog.blogspot.com/

Hi Sandip ,
How about escape “&” to “&” as below:
<udc:Query>https://contoso/_vti_bin/owssvr.dll?Cmd=Display&List={32364DED-7FE3-4276-837C-F2AC62C04B81}&View={804CC528-34B2-4473-89DB-C4E766CACC95}&XMLDATA=TRUE&NOREDIRECT=TRUE</udc:Query>
Reference:
http://social.technet.microsoft.com/Forums/en-US/534fae6b-2cef-4947-86e2-4869cb291cfe/the-form-cannot-be-opened-because-it-requires-the-domain-permission-level-log-id-5566-error?forum=sharepointcustomizationlegacy
http://stackoverflow.com/questions/3493405/do-i-really-need-to-encode-as-amp
Best Regards,
Eric
Eric Tao
TechNet Community Support

R12 : System Failed to generate the PDF Document.

I am trying to create a PO thru auto create but I hit inquire > View Document , I encountered an error: System Failed to generate the PDF Document. Please contact your system administrator. We just updgrade our instance from 11.5.2.10 to r12.1.2. Any thoughts?
Thanks,
Leo

Please see if these docs help.
System Fails To Generate PDF Document After Clicking "PDF Document" On Supplier Notification When Different Languages Are Used [ID 1078546.1]
PO Email From Tools>Communicate At Same Time of Approval Corrupts PDF File Transmits As .HTML & System Failed to Generate PDF [ID 1287488.1]
Thanks,
Hussein

History report error: | An Exceptional Error occurred. Application exiting. Check the log file for error 5022

Hi all
I've got a error msg when try to generate a report using Cisco history report tool:
Error | An Exceptional Error occurred. Application exiting. Check the log file for error 5022
It only happens when choose report template: ICD_Contact_Service_Queue_Activity_by_CSQ_en_us.
User tried samething on other PC, it working fine.
only on user' own PC and only choose this report, error appears.
user runing windows 7 and do not have crystal report installed
tried reinstalled the software, doesn't work.
also tried this: (https://cisco-support.hosted.jivesoftware.com/thread/2041254) - doesn't work
then tried https://supportforums.cisco.com/docs/DOC-6209 - doesn't work
attached the log file.
thanks.

wenqianyu wrote:From the log file:Looks like you get a Login Window.Error message showed up after username/password be enteredThere is an error in the log: Error happened in comparing UCCX version and HRC versionYou may need to do a clean uninstall, download the Historical report from the server, and install it again on the PC.Does this only happen to one PC or to every PC with this application?Wenqian
I have completely uninstalled the HRC, and download from server install again -- still doesn't work with exactly same error.
this matter only happens on this PC, when user try same thing on other PC, it works.
so i think it not relate to server or account.

Bursting Program Ends in Error with nothing in the Log file

Hi All
I have a RDF which calls a bursting program in After report trigger, the problem i'm facing is that the bursting program is completing successfully for a set of parameters and when again the program is run for the same set of parameters the bursting program is ending in error, i have checked the log file but nothing in the log file
below is my log file
+---------------------------------------------------------------------------+
XML Publisher: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XDOBURSTREP module: XML Publisher Report Bursting Program
+---------------------------------------------------------------------------+
Current system time is 30-SEP-2013 15:11:15
+---------------------------------------------------------------------------+
XML/BI Publisher Version : 5.6.3
Request ID: 574533
All Parameters: Dummy for Data Security=N:ReportRequestID=574532:DebugFlag=Y
Report Req ID: 574532
Debug Flag: Y
Updating request description
Updated description
Retrieving XML request information
Node Name:T1DEVEBSAPP1
Preparing parameters
null output =/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574533.out
inputfilename =/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574532.out
Data XML File:/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574532.out
Set Bursting parameters..
Temp. Directory:/tmp
[093013_031118656][][STATEMENT] Oracle XML Parser version ::: Oracle XML Developers Kit 10.1.3.130 - Production
[093013_031118657][][STATEMENT] setOAProperties called..
Bursting propertes.....
{user-variable:cp:territory=US, user-variable:cp:ReportRequestID=574532, user-variable:cp:language=en, user-variable:cp:responsibility=20678, user-variable.OA_MEDIA=http://t1devebsapp1.travelzoo.com:8001/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=574532, user-variable:cp:locale=en-US, user-variable:cp:user=SETUPUSER, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=574533, user-variable:cp:org_id=81, user-variable:cp:reportdescription=Travelzoo Invoice Print Selected Invoices-Child, user-variable:cp:Dummy for Data Security=N}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
602
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 30-SEP-2013 15:11:41
+---------------------------------------------------------------------------+
and the output says..
"Error!! Could not deliver the output for Delivery channel:null "
Wondering What might be the issue, any help on this is greatly appreciated.
-Ragul

Ram,
Is this a custom or standard concurrent program?
Was this working properly before? If yes, what changes have been done recently?
Did you try to relink the concurrent program executable file and see if this helps? Also, you could enable trace/debug and submit the request again and see if more details are collected in the logs -- See (Note: 296559.1 - FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12).
Regards,
Hussein

Bursting Program Errors Out with nothing in the Log file

Hi All
I have a RDF which calls a bursting program in After report trigger, the problem i'm facing is that the bursting program is completing successfully for a set of parameters and when again the program is run for the same set of parameters the bursting program is ending in error, i have checked the log file but nothing in the log file
below is my log file
+---------------------------------------------------------------------------+
XML Publisher: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XDOBURSTREP module: XML Publisher Report Bursting Program
+---------------------------------------------------------------------------+
Current system time is 30-SEP-2013 15:11:15
+---------------------------------------------------------------------------+
XML/BI Publisher Version : 5.6.3
Request ID: 574533
All Parameters: Dummy for Data Security=N:ReportRequestID=574532:DebugFlag=Y
Report Req ID: 574532
Debug Flag: Y
Updating request description
Updated description
Retrieving XML request information
Node Name:T1DEVEBSAPP1
Preparing parameters
null output =/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574533.out
inputfilename =/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574532.out
Data XML File:/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574532.out
Set Bursting parameters..
Temp. Directory:/tmp
[093013_031118656][][STATEMENT] Oracle XML Parser version ::: Oracle XML Developers Kit 10.1.3.130 - Production
[093013_031118657][][STATEMENT] setOAProperties called..
Bursting propertes.....
{user-variable:cp:territory=US, user-variable:cp:ReportRequestID=574532, user-variable:cp:language=en, user-variable:cp:responsibility=20678, user-variable.OA_MEDIA=http://t1devebsapp1.travelzoo.com:8001/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=574532, user-variable:cp:locale=en-US, user-variable:cp:user=SETUPUSER, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=574533, user-variable:cp:org_id=81, user-variable:cp:reportdescription=Travelzoo Invoice Print Selected Invoices-Child, user-variable:cp:Dummy for Data Security=N}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
602
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 30-SEP-2013 15:11:41
+---------------------------------------------------------------------------+
and the output says..
"Error!! Could not deliver the output for Delivery channel:null "
Wondering What might be the issue, any help on this is greatly appreciated.
-Ragul

Can you find any details about the error from the "View Detail" button (the same window where you check the log and output files)?
I found the Workflow logs, I am not sure what I am looking for, but i am not seeing any errors reported.The event viewer is supposed to send an email, so do you see anything in the logs that could be related?
Thanks,
Hussein

I try to purchase pages (after upgrading to maverick) and get this message: Failed to verify the preflight file. It is not signed by Apple.

I try to purchase Pages (after upgrading to Maverick OS) and keep getting this message:
Failed to verify the preflight file. It is not signed by Apple.
How to I get past this? I cannot find anything referencing preflight file. Who can identify this?

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
From the menu bar, select
Keychain Access ▹ Preferences ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL. Log out, log back in, and test.

(Cisco Historical Reporting / HRC ) All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054

Hi All,
I am getting an error message "All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054" when trying to log into HRC (This user has the reporting capabilities) . I checked the log files this is what i found out
The log file stated that there were ongoing connections of HRC with the CCX (I am sure there isn't any active login to HRC)
|| When you tried to login the following error was being displayed because the maximum number of connections were reached for the server . We can see that a total number of 5 connections have been configured . ||
1: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Current number of connections (5) from historical Clients/Scheduler to 'CRA_DATABASE' database exceeded the maximum number of possible connections (5).Check with your administrator about changing this limit on server (wfengine.properties), however this might impact server performance.
|| Below we can see all 5 connections being used up . ||
2: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:[DB Connections From Clients (count=5)]|[(#1) 'username'='uccxhrc','hostname'='3SK5FS1.ucsfmedicalcenter.org']|[(#2) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#3) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#4) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#5) 'username'='uccxhrc','hostname'='47BMMM1.ucsfmedicalcenter.org']
|| Once the maximum number of connection was reached it threw an error . ||
3: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Number of max connection to 'CRA_DATABASE' database was reached! Connection could not be established.
4: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Database connection to 'CRA_DATABASE' failed due to (All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054.)
Current exact UCCX Version 9.0.2.11001-24
Current CUCM Version 8.6.2.23900-10
Business impact Not Critical
Exact error message All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054
What is the OS version of the PC you are running and is it physical machine or virtual machine that is running the HRC client ..
OS Version Windows 7 Home Premium 64 bit and it’s a physical machine.
. The Max DB Connections for Report Client Sessions is set to 5 for each servers (There are two servers). The no of HR Sessions is set to 10.
I wanted to know if there is a way to find the HRC sessions active now and terminate the one or more or all of that sessions from the server end ?

We have had this "PRX5" problem with Exchange 2013 since the RTM version. We recently applied CU3, and it did not correct the problem. We have seen this problem on every Exchange 2013 we manage. They are all installations where all roles
are installed on the same Windows server, and in our case, they are all Windows virtual machines using Windows 2012 Hyper-V.
We have tried all the "this fixed it for me" solutions regarding DNS, network cards, host file entries and so forth. None of those "solutions" made any difference whatsoever. The occurrence of the temporary error PRX5 seems totally random.
About 2 out of 20 incoming mail test by Microsoft Connectivity Analyzer fail with this PRX5 error.
Most people don't ever notice the issue because remote mail servers retry the connection later. However, telephone voice mail systems that forward voice message files to email, or other such applications such as your scanner, often don't retry and
simply fail. Our phone system actually disables all further attempts to send voice mail to a particular user if the PRX5 error is returned when the email is sent by the phone system.
Is Microsoft totally oblivious to this problem?
PRX5 is a serious issue that needs an Exchange team resolution, or at least an acknowledgement that the problem actually does exist and has negative consequences for proper mail flow.
JSB

Error for Generating a log file

Hi Cezar sanos,
i am trying to generate a log file for ODI with details like who logged in and what is is doing kind of things.
For this i am executing the command like
lagentscheduler.bat "-PORT=20910" "-NAME=localagent" "-V=2" > C:\OraHome_1\logs\agent1.log.
But its getting the error like
A JDK is required to execute Web Services with OracleDI. You are currently using a JRE.
OracleDI: Starting Scheduler Agent ...
Starting Oracle Data Integrator Agent...
Version : 10.1.3.5 - 10/11/2008
DwgJv.main: Exit. Return code:-1

Just in case,
the following message :
A JDK is required to execute Web Services with OracleDI. You are currently using a JRE.
is only a warning and not an error message....

Generating a log file from oracle db

I want to generate a log file in which i want to dump some useful messages, when anyone does a dml operation on a table, and also, i want to have a switch like YES or NO (may be an environment variable,,) if i switch it to YES the log file should get generated, if NO then, no log file will be generated..
can anyone help, how can you do this task ?
thanks a lot in advance..
srini

You can use a Trigger and UTL_FILE to write to a file (on the server).
Example:
create or replace trigger test_file
after insert or delete or update on test_case
for each row
declare
v_logfile utl_file.file_type;
begin
v_logfile := utl_file.fopen('\myfiles','test_file.log','a');
if inserting then
     utl_file.put_line(v_logfile,'Inserting to table');
elsif deleting then
     utl_file.put_line(v_logfile,'Deleting to table');
else
     utl_file.put_line(v_logfile,'Updating to table');
end if;
utl_file.fclose(v_logfile);
end test_file;
I want to generate a log file in which i want to dump some useful messages, when anyone does a dml operation on a table, and also, i want to have a switch like YES or NO (may be an environment variable,,) if i switch it to YES the log file should get generated, if NO then, no log file will be generated..
can anyone help, how can you do this task ?
thanks a lot in advance..
srini

Apple Mobile Device Support fails to install. Log file provided.

I have uninstalled the older version of itunes and all associated files in the reccommended order. In particular I have verified all Apple Mobile Device files, services and registry entries have been removed. I then downloaded itunes version 11.0.3 to my PC and installed the product. Other than AMDS the product loaded onto my PC and appears to work ok, including being able to recognise my ipod. Unfortunately itunes does not recognise my iphone.
However, the install produced two error messages.
First Error:
Program Files\itunes\ipodUpdaterExt.dll failed to register.
HRESULT-1073741819
Contact your support personnel
Second Error:
Service 'Apple Mobile Device' failed to start. Verify you have sufficient privileges to start system services
During the install, the program 'rolled back' the portion related to AMDS. To further analyse the problem I extracted the AppleMobileDeviceSupport64.msi from the itunes64Setup.exe file. I ran the .msi file as the System Administrator and produced a log file. The log file partially contained the following:
DIFXAPP: INFO:   ENTER: DriverPackageInstallW
DIFXAPP: INFO:   Installing INF file 'C:\Program Files\Common Files\Apple\Mobile Device Support\NetDrivers\netaapl64.inf' (Plug and Play).
DIFXAPP: INFO:   Could not open file C:\Windows\System32\DriverStore\FileRepository\netaapl64.inf_amd64_neutral_bf78 5db627c6d127\netaapl64.inf. (Error code 0x3: The system cannot find the path specified.)
DIFXAPP: ERROR: PnP Install failed. (Error code 0x3EE: The volume for a file has been externally altered so that the opened file is no longer valid.)
DIFXAPP: INFO:   Attempting to rollback ...
DIFXAPP: INFO:   No devices to rollback
DIFXAPP: INFO:   Successfully removed '{4241D803-8012-4EA8-9DF1-63C9C886FCED}' from reference list of driver store entry 'C:\Windows\System32\DriverStore\FileRepository\netaapl64.inf_amd64_neutral_bf7 85db627c6d127\netaapl64.inf'
DIFXAPP: INFO:   RETURN: DriverPackageInstallW (0x3EE)
DIFXAPP: ERROR: encountered while installing driver package 'C:\Program Files\Common Files\Apple\Mobile Device Support\NetDrivers\netaapl64.inf'
DIFXAPP: ERROR: InstallDriverPackages failed with error 0x3EE
DIFXAPP: RETURN: InstallDriverPackages() 1006 (0x3EE)
CustomAction MsiInstallDrivers returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
Action ended 18:53:33: InstallFinalize. Return value 3.
Action 18:53:33: Rollback. Rolling back action:
Rollback: MsiInstallDrivers
Rollback: MsiRollbackInstall
I am not sure why the program is looking for the netaapI64.inf file in the
C:\Windows\System32\DriverStore\FileRepository\netaapl64.inf_amd64_neutral_bf785db627c6d127\ folder.
This file currently exists in:
C:\Windows\System32\DriverStore\FileRepository\netaapl64.inf_amd64_neutral_dc2cbd989eec1514\ folder.
I would very much appreciate your help

I just came across this:
https://discussions.apple.com/thread/3960640?start=0&tstart=0
See if this helps.

Exchange 2013 Window Backup failure - fails to clean up log files - error FFFFFFFC

Hello,
We currently have an Exchange 2013 - Exchange 2007 coexistence setup.
1x Windows Server 2008 R2 with Exchange 2007 CAS/HUB
1x Windows Server 2008 R2 with Exchange 2007 MBX
1x Windows Server 2008 R2 with Exchange 2013 CU 3 (all roles)
Since our current backup solution (Symantec Backup Exec 2010 R3) does not support backing up Exchange 2013 CU3 databases, we are using the builtin Windows Backup feature to backup the Exchange 2013 CU3 databases.
This has functioned for a while, until all of a sudden, the log files are not cleared anymore, causing our log disk to fill up.
Our Exchange 2013 server looks like this:
C: Windows + Exchange installation
D: Databases
E: Database Log Files
F: Archive Databases
G: Archive Database Log Files
S: Dedicated backup volume
The backup is scheduled to run every day at 21:00 hours, performing a full VSS backup of D:,E:,F: and G: to the volume S:
Windows backup log says the backup completed with exceptions, leaving the Exchange logs untouched and filling the drive.
The Windows Backup Command Line tools are NOT installed since they are not compatible with Exchange 2013.
In the eventvwr we can see the following error:
The Microsoft Exchange Replication service VSS Writer (Instance a33ec440-7f12-4c50-806b-1bc5ceaf8aad) failed with error FFFFFFFC when processing the backup completion event.
The command VSSADMIN LIST WRITERS displays the following:
Writer name: 'Microsoft Exchange Writer'
   Writer Id: {76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}
   Writer Instance Id: {cf84a907-76dc-428c-90e0-c18a3f9db493}
   State: [1] Stable
   Last error: Retryable error
Restarting the Microsoft Exchange Replication (MSExchangeRepl) clears the writer error, same with a reboot, however the error comes backup after the next backup.
Any thoughts on how to resolve this issue?
Thanks.

Hello,
Here is a blog for your reference.
http://blogs.technet.com/b/timmcmic/archive/2012/03/11/exchange-and-vss-my-exchange-writer-is-in-a-failed-retryable-state.aspx
If there is any useful information after you change the logging to expert, please free let me know.
Cara Chen
TechNet Community Support

MDIS failed to generate the Log file!!!

Similar Messages

Maybe you are looking for