MDM to JMS Scenario

Hi,
This is MDM to JMS developement scenario.
Design part
mapping
i imported XSD structure both source and receiver sides. i done disign part...
Configuration part
i creat business system for both send and receiver. as well as communication channel also.
hear my problem is....
after communication chanel hace to creat
Senderaggrement
ReceiverAgreement
REceiverdetermination
interface determination
in sender aggrement, we have to select communication component and interface......hear i could not found the sender inter face.
in receiver aggrement also have to select the communication component and interface....hear interface is showing but it is showing (OA inter face ) mans sender side interface.
what could be the problem...
suggest me.
Thanks and regards,
Kesava

Hi,
Check the sender service interface category is OUTBOUND or not and which message type is assigned to the sender service interface is it sender message type or receiver message type and Same as receiver service interface also you have to check.
check the operation mapping what are service interfaces are assigned.
When we perform any changes to our design objects and configuration objects which were created in our IR and ID and if the changes were not reflected to that objects, at that time every one mind would point to perform the cache refresh. We have different options available to perform the cache refresh.
In IR from MenuàEnvironmentàClear SLD Data cache.
In ID from Menu ClearàEnvironmentàSLD Data Cache.
regards,
ganesh.

Similar Messages

File to JMS Scenario - Error is Receiver JMS Adapter

Hi,
I am working on File to JMS scenario. I have deployed all required jars for MQ 6.0.2 in SDM. Create all MQ related objects. I am getting following error for Receiver JMS adapter in CC Monitoring.
Please let me know if I have missed anything. Is there anything to do in Visiual Administrator->JMS Provider or JMS Connector for these kind of Scenarios?
Thanks in Advance...
Error during channel initialization; exception trace: javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for 'sap:QM_APPLE'
at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:586)
at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:2110)
at com.ibm.mq.jms.MQConnection.createQMNonXA(MQConnection.java:1532)
com.ibm.mq.MQException: MQJE001: An MQException occurred: Completion Code 2, Reason 2009
MQJE016: MQ queue manager closed channel immediately during connect
Closure reason = 2009
at com.ibm.mq.MQManagedConnectionJ11.(MQManagedConnectionJ11.java:212)
at com.ibm.mq.MQClientManagedConnectionFactoryJ11._createManagedConnection(MQClientManagedConnectionFactoryJ11.java:318)

Hi,
I have made my Qmanager as default Qmgr. Now the error is :- Socket connection attempt refused
Recv JMS Communication Channel Error:-
Error during channel initialization; exception trace: javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for 'sap:QM_APPLE'
at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:586)
at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:2110)
at com.ibm.mq.jms.MQConnection.createQMNonXA(MQConnection.java:1532)
com.ibm.mq.MQException: MQJE001: An MQException occurred: Completion Code 2, Reason 2059
MQJE011: Socket connection attempt refused
at com.ibm.mq.MQManagedConnectionJ11.(MQManagedConnectionJ11.java:212)
at com.ibm.mq.MQClientManagedConnectionFactoryJ11._createManagedConnection(MQClientManagedConnectionFactoryJ11.java:318)

Proxy to JMS Scenario: switch from sync to async proxy,does it makes sense?

Hi @all,
i've implemented a sync proxy to JMS scenario that works well. Backend is ECC 6.0 and Middleware is PI 7.1.
Business Case: Run a request with a number and get a response back with a corresponding entry for the number. That means, there is always a response expected.
Now the following thing appears: the receiver system could not handle many calls at one time (200 calls are planned at each run), the calls reduces the performance. Now gys at receiver system likes to develope a buffer of 10 seconds between the requests to handle some kind of load balancing with that. That means for the request that it the response takes +10 seconds back to backend. It is also possible to handle that in SAP backend with a waiting-statement in coding, so there is no need to go from sync to async - but the customer requested us to implement this scenario in async.
JMS is always async, I know. But the Service Interfaces for Inbound and Outbound are of mode sync - so I can call my outbound Interface class in backend with Importing Output and Exporting Input.
My question is: makes it sense to go from sync to an async scenario?
And how looks the coding in backend for the response? I guess that it only makes sense to switch to async when no response entry is needed (example: for write operations).
Thanks in Advance,
Stefan

> But in case of switching, what is the best way?
> Should I implement 2 senarios? Or is it ok to switch the Inbound and Outbound Service Interface from sync to async?
I don't think you need 2 scenarios for this. Just one is enough with different RDs.
Over all in this case you have to re-create/modify the service interfaces and also you have to create 2 interface mappings. You have to also create the new inbound and outbound proxies since service interface mode will be changed. For outbound proxy the code can be reused and for inbound proxy also logic and code can be taken from your old code.

SRM-MDM Catalog - XI Scenario

Hi,
I am working on SRM-MDM Catlog 1.0 integration with XI.
I have to configure scenarios in XI for:
1) Upload of Supplier catalog via Server File System to SAP MDM catalog. for example in XML Format.
2) Replication of Product and COntract data.
We have to use SRM_MDM_CATALOG scenario contained within XI Content uploaded for SRM_MDM.
=>I already have uploaded the XI Integration Content in Integration repository (SRM_MDM_CATALOG).
=>I already have SRM-MDM 1.0 catalog Configuration guide, But it doesnot detail much about scenario(components involved in Integration Repository and Integration Directory)
Do anyone have some document which details about scenario or any help material regarding the same/or if some expert can Guide/Brief me on the scenario.
Thanks and Regards,
Vijay Raheja

Hi,
Please see the below link
/people/harrison.holland5/blog/2006/12/20/xi-configuration-for-mdm-integration--sample-scenario
Regards
Chilla..

Regarding File to JMS scenario

Hi friends please help me on file 2 JMS scenario. send me the screen shots of the below scenario.

Hi
Refer to following blogs .
JMS Adapter
http://help.sap.com/saphelp_nw2004s/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how%20to%20use%20the%20content%20conversion%20module%20with%20the%20xi%203%20j2ee%20jms%20adapter
/thread/217893 [original link is broken]
JMS adapter -Message format pre-requisites
/people/alessandro.guarneri/blog/2006/01/04/jms-sender-adapter-handling-too-short-lines
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
Please go through the following links.....
/people/sudheer.babu2/blog/2007/01/18/asyncsync-communication-using-jms-adapter-without-bpm-sp-19
/people/venkataramanan.parameswaran/blog/2007/01/18/syncasync-communication-in-jms-adapter-without-bpm-sp19
First would be to deploy drivers for JMS scenarios - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
Secondly, to configure JMS adapters;
http://help.sap.com/saphelp_nw04/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
In case JMS scenario that you have is a sync one, in that case if you are below SP19 you might have to build a BPM - ref: http://help.sap.com/saphelp_nw04/helpdata/en/83/d2a84028c9e469e10000000a1550b0/content.htm
Else ref:
/people/sudheer.babu2/blog/2007/01/18/asyncsync-communication-using-jms-adapter-without-bpm-sp-19
/people/venkataramanan.parameswaran/blog/2007/01/18/syncasync-communication-in-jms-adapter-without-bpm-sp19
How to correlate JMS messages - https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5059f110-0d01-0010-7c8b-fdc983be70c0
How to use conversion modules in JMS - https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
Thanks!!

SRM -MDM in classic scenario

Hi,
Please let me know if am using SRM MDM in classic scenario then
u2022If I create a shopping cart in SRM do I need to maintain the product category of the items selected from MDM in SRM as well.
u2022Also, if PO is created in MM then does it mean that all the products in MDM have to be created in MM as well. If not then what is the scenario like.
Thanks,
Manu
Edited by: Manu Agrawal on Apr 24, 2009 12:15 PM

Hi
If my understanding is correct ,i will reproduce your question again . If you create shopping cart from the supplier catalogue in a classic scenario how the Material group sync happens when PO is created in the Back end R/3.
My assumption and the practice followed generally is that a Fixed Material group is decided and automatically maintained via OCI interface when shopping cart is created .Which means we define the rule for all catalogue items to determine and populate respective material group automatically into shopping cart.
As shopping cart is created since for the catalogue items there will be contract and source assigned in the ERP ,as soon as PR is replicated to R/3 as per classic scenario , the PR will have supplier assignment and if you run auto order transaction code system will generate PO in R/3 and sent to the supplier based on the condition records.
For the Material group you will configure it in R/3 for all catalogue items and replicate it in SRM and also you will provide input for the BADI or FM which create shopping cart automatically from catalogue through OCI method.
Hope this helps..
regards
Narahari

Rfc-xi-jms scenario

I have a rfc-xi-jms scenario. A message is triggered from ECC. HOw can I check whether
message is send from ECC ?? I mean ....I want to check in ECC system ?? Is there any Tcode
to see the success message or payload in ECC ?? In SXMB_MONI I am not able to see the RFC messages.
Regards
kumar

>we can see proxy messages in ECC system through sxmb_moni right ??
You are Right,
In Proxy there is no protocol conversion hence it might reflect in the Sxmb_moni.
> In ECC system why can't we see the messages in sxmb_moni ?? For RFC..
The protocol conversion happens and it is taken care by the adapters to XML Message.
Regards
Agasthuri Doss

IDOC acknowlegment IDOC-PI-JMS Scenario

Hi,
I have a IDOC-PI-JMS scenario. (With msg branching, PI 7.1 EHP1)
The message are processing but it seems that there is no acknolegment sent back to the ECC system; the outbound IDOC remains in status 03.
By turning acknologement off in IDX_NOALE everything is OK except the IDOC remaining in status 03.
I found this how-to document for the IDOC-PI-IDOC scenario, but I need to configure IDOC acknowlegment for IDOC-PI-JMS scenario, someone can point to some guide/how-to? Do I need to still do all the ALE Audit configuration?
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
Thanks,
Martin

Hi Martin,
Please go this article [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe?quicklink=index&overridelayout=true] and [http://help.sap.com/saphelp_nwpi71/helpdata/EN/ab/bdb13b00ae793be10000000a11402f/frameset.htm] for information about How to handle the Idocs acknowledgements.
Regards,
Kalpana.

Sap ecc(RFC) to Java application (jms) scenario in sap pi

Hi Team, How to configure SAP(ECC) to JMS scenario with steps.If have any documents please send me. I have urgent requirement please help me. Thanks in advance Regards.. Ravi

Hi,
For JMS no need to maintain any thing in SLD.Just create Communication component in ID.
When comes to sender RFC channel.
App server -- sender system hostname
App server gateway:sapgwSystemNo of sender system
Program ID :any meaning full name (make sure to maintain the same name in trfc created in your sender system)
Give log on details of ECC system.
Regards
Venkat

Sap ecc(bapi) to Java application (jms) scenario in sap pi

Hi Team,
How to configure SAP(ECC) to JMS scenario with steps.If have any documents please send me.
I have urgent requirement please help me.
Thanks in advance
Regards..
Ravi

RFC -to- JMS Scenario

MDM to JMS

HI All
We got one problem in MDM To JMS production.
The problem is The message are in scheduled status in production system in pi.
we checked all queue .. all are fine. in production system the Queue refresh is possible.
Communication channel is showing green color but the messages are not processed, the messages are in scheduled status.
how can i reprocessed the scheduled message from pi system to jms system.
Thanks and regards,
Kesava.

Hi naveen,
Hear the quality of the service is EO.
The messages are strucked in queus...Thats why the messages are not delivered. finally the messages are delivered .
Q. in productin system the messages are strucked in queus. can we refresh that messages in queus in production system.
Thanks and regards,
Kesava.

How to procced with JMS scenario.

Hello everyone,
I want to test File to JMS scenario.
I believe XI provides JMS adapter as a part of it, Am I correct?
II am totally blank , from where should I start :$----
<b>which jar files i need?
From where can I get them ?
WhereI should I deploy them ?
Any prerequisitives for it ?
Any setting to be done in SLD or anywhere else ?
And what other steps i need to do to implement any JMS scenario?</b>
I would appreciate anyone's help. Was trying to find some docuement on this in Sdn but docs confused me.
Thanks,
Gaurav

Gaurav,
In case you want to access an external JMS service provider like Sonic MQ and so on, then you will need to install the JMS drivers for the same.
To get the JMS drivers, you need to get which JMS service you are trying to acess, get the Drivers from that vendor and then install them on the XI server.
In case you are planning to use the JMS service provided by SAP XI's Web AS then you can refer to the blog Pointed above.
For how to install the drivers,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70ffd890-0201-0010-708f-d5dad2dfcf3a
Regards
Bhavesh

Proxy-2-JMS Scenario: more than 10 additional JMS properties possible

Hi @all,
we're implementing a Proxy-2-JMS-Scenario. The JMS reciever side needs unfortunalety more than 10 additional JMS properties. In XI/PI the maximum number of additional JMS properties is 10.
Do somebody know a good workaround in PI how to deal with it?
Thanks and best regards,
Stefan

Hi @all,
there is no way to handle with more than 10 additional jms properties for jms header.
Best Greetings,
Stefan

Need sample JMS scenario

Hi All,
I need a sample JMS scenario to test before going for dev.my requirement is like this..
(Java program/Web service)>JMS queue>XI>JMSQueue>(Java custom pgrm/Web service).
Thanks in advance.
Regards,
Srinivas

Hi Srini,
I guess u need a real worldd scenario to work out.
suppose ur client webservice is sending a file and ur server webservice is storing it in different queue.so for testing u can do 1 thing ...create queues in sender sys,xi and reciver sys....and check weather these r working or not!!!
try out these links...may be useful for u!!!
JMS Adapter
http://help.sap.com/saphelp_nw2004s/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how%20to%20use%20the%20content%20conversion%20module%20with%20the%20xi%203%20j2ee%20jms%20adapter
/thread/217893 [original link is broken]
JMS adapter -Message format pre-requisites
/people/alessandro.guarneri/blog/2006/01/04/jms-sender-adapter-handling-too-short-lines
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
regards
Biplab

Regarding JMS scenario

HI friends. i am doing file 2 jms scenario. in that during configuration part i need jms receiver details. i have IBM MQ in my system . can anybody help me hw to create a queue queue name, channel name, port number etc.

Hi,
U need to create quque on MQ server. ask the administrator to create the queues. he will provide all the necessary details which is required for configuration.
Please go through the following links.....
/people/sudheer.babu2/blog/2007/01/18/asyncsync-communication-using-jms-adapter-without-bpm-sp-19
/people/venkataramanan.parameswaran/blog/2007/01/18/syncasync-communication-in-jms-adapter-without-bpm-sp19
First would be to deploy drivers for JMS scenarios - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
Secondly, to configure JMS adapters;
http://help.sap.com/saphelp_nw04/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
In case JMS scenario that you have is a sync one, in that case if you are below SP19 you might have to build a BPM - ref: http://help.sap.com/saphelp_nw04/helpdata/en/83/d2a84028c9e469e10000000a1550b0/content.htm
Else ref:
/people/sudheer.babu2/blog/2007/01/18/asyncsync-communication-using-jms-adapter-without-bpm-sp-19
/people/venkataramanan.parameswaran/blog/2007/01/18/syncasync-communication-in-jms-adapter-without-bpm-sp19
How to correlate JMS messages - https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5059f110-0d01-0010-7c8b-fdc983be70c0
How to use conversion modules in JMS - https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
thnx
chirag

MDM to JMS Scenario

Similar Messages

Maybe you are looking for