Regarding File to JMS scenario

Hi friends please help me on file 2 JMS scenario. send me the screen shots of the below scenario.

Hi
Refer to following blogs .
JMS Adapter
http://help.sap.com/saphelp_nw2004s/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how%20to%20use%20the%20content%20conversion%20module%20with%20the%20xi%203%20j2ee%20jms%20adapter
/thread/217893 [original link is broken]
JMS adapter -Message format pre-requisites
/people/alessandro.guarneri/blog/2006/01/04/jms-sender-adapter-handling-too-short-lines
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
Please go through the following links.....
/people/sudheer.babu2/blog/2007/01/18/asyncsync-communication-using-jms-adapter-without-bpm-sp-19
/people/venkataramanan.parameswaran/blog/2007/01/18/syncasync-communication-in-jms-adapter-without-bpm-sp19
First would be to deploy drivers for JMS scenarios - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
Secondly, to configure JMS adapters;
http://help.sap.com/saphelp_nw04/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
In case JMS scenario that you have is a sync one, in that case if you are below SP19 you might have to build a BPM - ref: http://help.sap.com/saphelp_nw04/helpdata/en/83/d2a84028c9e469e10000000a1550b0/content.htm
Else ref:
/people/sudheer.babu2/blog/2007/01/18/asyncsync-communication-using-jms-adapter-without-bpm-sp-19
/people/venkataramanan.parameswaran/blog/2007/01/18/syncasync-communication-in-jms-adapter-without-bpm-sp19
How to correlate JMS messages - https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5059f110-0d01-0010-7c8b-fdc983be70c0
How to use conversion modules in JMS - https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
Thanks!!

Similar Messages

File to JMS Scenario - Error is Receiver JMS Adapter

Hi,
I am working on File to JMS scenario. I have deployed all required jars for MQ 6.0.2 in SDM. Create all MQ related objects. I am getting following error for Receiver JMS adapter in CC Monitoring.
Please let me know if I have missed anything. Is there anything to do in Visiual Administrator->JMS Provider or JMS Connector for these kind of Scenarios?
Thanks in Advance...
Error during channel initialization; exception trace: javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for 'sap:QM_APPLE'
at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:586)
at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:2110)
at com.ibm.mq.jms.MQConnection.createQMNonXA(MQConnection.java:1532)
com.ibm.mq.MQException: MQJE001: An MQException occurred: Completion Code 2, Reason 2009
MQJE016: MQ queue manager closed channel immediately during connect
Closure reason = 2009
at com.ibm.mq.MQManagedConnectionJ11.(MQManagedConnectionJ11.java:212)
at com.ibm.mq.MQClientManagedConnectionFactoryJ11._createManagedConnection(MQClientManagedConnectionFactoryJ11.java:318)

Hi,
I have made my Qmanager as default Qmgr. Now the error is :- Socket connection attempt refused
Recv JMS Communication Channel Error:-
Error during channel initialization; exception trace: javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for 'sap:QM_APPLE'
at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:586)
at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:2110)
at com.ibm.mq.jms.MQConnection.createQMNonXA(MQConnection.java:1532)
com.ibm.mq.MQException: MQJE001: An MQException occurred: Completion Code 2, Reason 2059
MQJE011: Socket connection attempt refused
at com.ibm.mq.MQManagedConnectionJ11.(MQManagedConnectionJ11.java:212)
at com.ibm.mq.MQClientManagedConnectionFactoryJ11._createManagedConnection(MQClientManagedConnectionFactoryJ11.java:318)

Regarding File to Idoc Scenario

Dear Friends,
I am performing File to Idoc Scenario in XI 3.0. Here I got struck, I am not able to see my sender file in SXMB_IFR. It is saying that no messages availabe for selection. The file was picked up successfully from the souce. Please help me.
Thanks in advance.

check the error/ warning message that would be available at the end of the page (in RWB....where you see th yellow triangle)......even my IE is showing a yellow triangle but none of my interfaces are facing a problem.....just check for the status of the Communication channel in AE.....since your message is not transferred to SXMB_MONI confirm that the channel log is showing successful.....also can you tell what is teh status of other interfaces?.....are they running fine?...if yes then there seems to be problem with the sender channel......are you using any FCC?
One such situation where IE is showing yellow status is mentioned here: RWB Integration Engine status yellow
Just one doubt to ask...are you using the required Sender channel in the Sender Agreement?...hope there is no mismatch here....
Regards,
Abhishek.
Edited by: abhishek salvi on Jul 14, 2009 11:38 AM

Regarding File 2 JDBC Scenario

Hi Friends,
can anybody help me on file 2 jdbc scenario. here my input file is not picked but in moni it is showing black flag. and in message monitoring in adapter engine sender side interface status is successful but receiver side interface status is waiting and i am not getting the output in my database table.please help me one this issue

Hi Uday
Kindly check your server and port whether they are up
go to transaction SM49 and click on PING then in the next string give your server and port address and press F8
you will get the actual status of your server
also
You have to deploy the required JDBC drivers for the database before making connection. Ask the database provider or your vendor for the divers. That should be deployed using SDM tool
Start visual admin of XI and select service "Deploy" and then select option "Deploy and start" to select file and deploy it
now here is the steps to deploy this module.
How to deploy adapter module in production
Three option available:
1. Using SDM
2. Using Visual Admin
3. Using NW development studio (Not available for Production)
We will use Visual Admin Deploy deploy service to deploy EAR file of adapter module.
Steps:
1. Goto VM->Deploy service
2. Select option Deploy and start
3. Select EAR file provided for deployment
4. Restart the service.
5. Done
follow this guide
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70ffd890-0201-0010-708f-d5dad2dfcf3a
good luck
regards
Sandeep
If helpful kindly reward points
Edited by: sandeep sharma on Apr 19, 2008 7:46 AM

PI 7.1 : File to JMS Scenario Help.

Hello Experts,
We are trying to implement a scenario where in we want to send the data in the file as it is to the JMS adapter in 7.1 because the data is already in expected format. The file is generated by SAP.
The format of the data is:
EDI_DC40 2000000000001044736700 0312 ZFDPFCI2 ZDPFCOUT2 ZDPFCOSAPSD0 LS SD0_200 PI LS DPFC 20100913041404 20100429062757 Z2FDPFCI2000 200000000000104473600000100000001I000 000000000 12345566677 12345566677 W JD]D[y
How can i achieve this? I have tried to put everything in a single field type string element and that doesn't work (parser error).
I don't want to go for FCC.
Thanks!
Harpreet

Following William's blog, you can achieve it, you can send any unstructured data through XI,
You don't have to create interface in ESR or IR.
How to send any data (even binary) through XI, without using the Integration Repository
/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
Regards
Liang
Edited by: Liang Ji on Sep 23, 2010 10:54 PM

Query Regarding File to IDOC Scenario (1:2)

Hi,
I am working on a scenario like One File to Two IDOC's . In file we are getting some business functions (It's One feild in source file) , Some Business functions I need to map with One IDOC and some with other Idoc.
So I need to route a file content to two different Idoc's at a time.
I know this we can achieve this by using standard functions but not aware what to use.
So could anyone guide me how to achieve this..

Hi Saydulu,
>>n file we are getting some business functions (It's One feild in source file) , Some Business functions I need to map with One IDOC and some with other Idoc.
So you know which fields to map to idocA and whih to IdocB
Now to configure this...
1. create a Message Mapping
Add source as the message type which you created for file and target as the IDocs which you want to use .. Make sure you add them in the signature tab of message mapping. Here I will suggest to change the occurence of IDoc node befotre adding it to message mapping signature tab.. By default it is 1..1. To change the occurence download the XSD of Idoc and change the minoccur to 0 and maxoccurs to unbounded. This shopuld be done for both the Idocs.
2. Create a interface mapping with the source message interface (or service interface) and target Idoc names. No need to create any service interface for Idoc, you can use the same Idocs (that is imported from SAP)
3. Use this in interface determination of Integration Directory
Regards
suraj

Regarding JMS scenario

HI friends. i am doing file 2 jms scenario. in that during configuration part i need jms receiver details. i have IBM MQ in my system . can anybody help me hw to create a queue queue name, channel name, port number etc.

Hi,
U need to create quque on MQ server. ask the administrator to create the queues. he will provide all the necessary details which is required for configuration.
Please go through the following links.....
/people/sudheer.babu2/blog/2007/01/18/asyncsync-communication-using-jms-adapter-without-bpm-sp-19
/people/venkataramanan.parameswaran/blog/2007/01/18/syncasync-communication-in-jms-adapter-without-bpm-sp19
First would be to deploy drivers for JMS scenarios - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
Secondly, to configure JMS adapters;
http://help.sap.com/saphelp_nw04/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
In case JMS scenario that you have is a sync one, in that case if you are below SP19 you might have to build a BPM - ref: http://help.sap.com/saphelp_nw04/helpdata/en/83/d2a84028c9e469e10000000a1550b0/content.htm
Else ref:
/people/sudheer.babu2/blog/2007/01/18/asyncsync-communication-using-jms-adapter-without-bpm-sp-19
/people/venkataramanan.parameswaran/blog/2007/01/18/syncasync-communication-in-jms-adapter-without-bpm-sp19
How to correlate JMS messages - https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5059f110-0d01-0010-7c8b-fdc983be70c0
How to use conversion modules in JMS - https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
thnx
chirag

How to procced with JMS scenario.

Hello everyone,
I want to test File to JMS scenario.
I believe XI provides JMS adapter as a part of it, Am I correct?
II am totally blank , from where should I start :$----
which jar files i need?
From where can I get them ?
WhereI should I deploy them ?
Any prerequisitives for it ?
Any setting to be done in SLD or anywhere else ?
And what other steps i need to do to implement any JMS scenario?
I would appreciate anyone's help. Was trying to find some docuement on this in Sdn but docs confused me.
Thanks,
Gaurav

Gaurav,
In case you want to access an external JMS service provider like Sonic MQ and so on, then you will need to install the JMS drivers for the same.
To get the JMS drivers, you need to get which JMS service you are trying to acess, get the Drivers from that vendor and then install them on the XI server.
In case you are planning to use the JMS service provided by SAP XI's Web AS then you can refer to the blog Pointed above.
For how to install the drivers,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70ffd890-0201-0010-708f-d5dad2dfcf3a
Regards
Bhavesh

File to JMS

Hi,
Is there any blog that gives a step by step procedure for file to jms scenario.

Hi,
Please go through the following links.....
/people/sudheer.babu2/blog/2007/01/18/asyncsync-communication-using-jms-adapter-without-bpm-sp-19
/people/venkataramanan.parameswaran/blog/2007/01/18/syncasync-communication-in-jms-adapter-without-bpm-sp19
First would be to deploy drivers for JMS scenarios - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
Secondly, to configure JMS adapters;
http://help.sap.com/saphelp_nw04/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
In case JMS scenario that you have is a sync one, in that case if you are below SP19 you might have to build a BPM - ref: http://help.sap.com/saphelp_nw04/helpdata/en/83/d2a84028c9e469e10000000a1550b0/content.htm
Else ref:
/people/sudheer.babu2/blog/2007/01/18/asyncsync-communication-using-jms-adapter-without-bpm-sp-19
/people/venkataramanan.parameswaran/blog/2007/01/18/syncasync-communication-in-jms-adapter-without-bpm-sp19
How to correlate JMS messages - https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5059f110-0d01-0010-7c8b-fdc983be70c0
How to use conversion modules in JMS - https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
Please Reward Points******
Cheers.,
Stallin

Regarding RFC connection in File to IDOC Scenario

Hi everyone,
I was configuring file to Idoc Scenario, i have made all the required configurations in SLD, IR and ID, in XI system and in R/3 System. i have created RFC connection from XI to R/3 system, and its working fine. i have created an Partner profile in WE20 with sender file system name with inbound parameters. But still i am getting error as EDI Partner Profile not defined in WE05- iDOC ADDED WITH ERRORS. Do we need to create an RFC connection from R/3 system to XI for file to Idoc Scenario
!!! Note: RFC connection from R/3 system to XI is not working, will this be a problem for file to idoc scenario. !!!
Regards,
Varun Reddy.K

Hi Varun
Follow these steps
First - Maintain the Sender R/3 System:
SM59 : Create a RFC destination to XI
WE21 : Create a TRFC Port ->Specify the RFC Destination Created
BD54 : Create a Logical System for the Idoc Receiver
WE20 : Create Partner Profile ->Maintain Outbound and the Inbound Parameters
Second - Log on to XI System:
SM59 : RFC Destination for Sender System
IDX1 : Create the port to get Idoc Metadata from Sender System ( The Port Name must match the port name in the idoc header - Usually in format SAP<System ID>. eg. SAPID1 [Optional Step. Not mandatory]
IDX2 : Maintain the Idoc Metadata. This is needed only by XI, and not by other SAP systems. IDX2 is needed because XI needs to construct IDoc-XML from the IDoc. No other SAP system needs to do that.
Regards,
Santosh

Regarding error in XI File to IDoc scenario

Hi,
when i was doing file 2 idoc scenario i got this error "Unable to convert sender service to an ALE logical system". please resolve my issue as early as possible.

Uday,
Please go through these threads:
Unable to convert the sender service to an ALE logical system
How to convert Sender Party/Service to a Logical System?
Unable to convert the sender service to an ALE logical system
BR,
Alok
Edited by: Alok Sharma on Jan 31, 2008 12:39 PM

Regarding File 2RFC scenario

Hi Friends, please help me on file 2 rfc scenario . here after completion of the configuration and design. i place my file in my server but it was not picked. can u solve this issue.i have created this scenario using business service.

Hi
you can check the following things.
1. check whether the parameters given are correct or not.
like file name , directory name etc.
2.check whether the channel is active or not in configuration..
3.second check adaters ststus in the runtimeworkbench you can check this,
go to the runtime workbench->component monitoring->display>adapter engine->communication channel monitoring check the adapter status , it will also describe about the error in the channel.
4.check whether the adapter is start or not if not start tye adapter by click on automatically.
if u still face the problem please reply me back.
Thanks
Rinku

Need information regarding IDOC to JDBC Scenarios.

Hi,
Kindly help me with the pre-requisites inorder to start with a scenario of IDOC to JDBC and also the scenario of JDBC to IDOC.
Regards,
Sreedhar, Av

Hello Sreedhar,
While we working in JDBC or JMS Adapters we should deploy the Drivers..
Go through this links,
/people/varadharajan.krishnasamy/blog/2007/02/27/configuring-jdbc-connector-service-to-perform-database-lookups
http://searchsap.techtarget.com/tip/0,289483,sid21_gci1246926,00.html
To install JDBC driver follow the how to guide.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20install%20and%20configure%20external%20drivers%20for%20jdbc%20and%20jms%20adapters.pdf
Configuration of JDBC Adapter for SQL Server
JDBC Driver = com.microsoft.jdbc.sqlserver.SQLServerDriver
Connection = jdbc:microsoft:sqlserver://hostname:<port>;DatabaseName=<DBName>
UserID and Password.
If the connection is not working find the correct port number.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033
JDBC- X I - R/3 Scenario
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Please check the driver path as mentioned below.
JDBC Driver : sun.jdbc.odbc.JdbcOdbcDriver
Connection:jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//location of DB table.mdb;
No JDBC driver required.
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
follow this thread
Re: Problem when connecting to MS Access through JDBC Adapter.
SAP Note 850116 has details
2) While we working in IDOC Adapters we should do ALE Config of IDOC Settings .
Do these configurations in R/3 and in XI...
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
Here in IDOC to JDBC interface we need not to config sender Adapter..
1) The main usage of a sender adapter is to convert the input format into the XI supported XML format.
Once the conversion is completed the sender agreement appends the header with the sender details.
In case of these adapters we wont require sender agreement and sender communicationchannel for the
following reasons.
Sender agreement is associated with a namespace when we shoot an idoc frm r/3 if already contains its standard sap namespace. so those is need of sender agreement
The sender communication channel use is to identify the sending system and adapter, as the idoc header contains the details there is no need to sender.
These adapters resides on ABAP stack here the integration server takes care of IDOC/HTTP to XML conversion without requirement of adapter.
The business system that is sending the adapter has already been assigned to a techinical system which normally acts as an integration server...
IDOC to xi links
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
Hope this explanation is useful to u..
Thanks,
Satya Kumar
Edited by: SATYA KUMAR AKKARABOYANA on Jun 3, 2008 9:57 AM

Need sample JMS scenario

Hi All,
I need a sample JMS scenario to test before going for dev.my requirement is like this..
(Java program/Web service)>JMS queue>XI>JMSQueue>(Java custom pgrm/Web service).
Thanks in advance.
Regards,
Srinivas

Hi Srini,
I guess u need a real worldd scenario to work out.
suppose ur client webservice is sending a file and ur server webservice is storing it in different queue.so for testing u can do 1 thing ...create queues in sender sys,xi and reciver sys....and check weather these r working or not!!!
try out these links...may be useful for u!!!
JMS Adapter
http://help.sap.com/saphelp_nw2004s/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how%20to%20use%20the%20content%20conversion%20module%20with%20the%20xi%203%20j2ee%20jms%20adapter
/thread/217893 [original link is broken]
JMS adapter -Message format pre-requisites
/people/alessandro.guarneri/blog/2006/01/04/jms-sender-adapter-handling-too-short-lines
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
regards
Biplab

XI 3 File to IDoc scenario - Still referencing Old Logical system

Hi
Dont know if you can help. I have a file to idoc scenario using XI 3 to R/3 4.6c system.
I had the interface working from a third party system XMLHUB to SAP R/3. The Logical system name for the XMLHUB was XMLHUB01 in the SLD which I have set up as a partner profile in R/3. I have recently changed the logical system name to XMLHUBDEV01 in the SLD and created that logical system in R/3 and changed the partner profile to XMLHUBDEV01.
Unfortunately in the sender information of the IDoc the partner number is still XMLHUB01 and not XMLHUBDEV01. I don't understand where this partner is sent from to get into the control record of the IDoc.
I have cleared the SLD cache in both the Repository and the directory. Is there somewhere else I should be looking? Any help would be appreciated.
Regards
Daniel

hi daniel...
this thread wud answer ur query....
Re: IDOC Payload
regards..
vishal

Regarding File to JMS scenario

Similar Messages

Maybe you are looking for