@MDSHIFT issue with future years

We have a complex calc on a dynamic member using @MDSHIFT. It works perfectly if we arepointing to past years; but if we point to future year(s), it fails without any error.
The calc itself validates fine.
Are there any exceptions for using @MDSHIFT with future years?(we do have forecast data for the future years too)
Example from our calc script:
((@MDSHIFT("Adjust Stat Forecast"->"Forecast"->"Jan",1,"Year",)
Edited by: 784749 on Mar 10, 2011 1:57 PM

Hi,
What do you try to shift? For example: Data from Next Year to current Year?
You may need to check what member you fix on in the calc, the problem could be because the fix is not correct or the
desitination is not correct.

Similar Messages

  • HR - Daily Snapshot Issues with Future Dated Changes

    The w_employee_daily_snp_f_1 table has timing issues. The effective end date on all per_all_assignments_f, per_all_people_f, etc always shows the time at midnight. For example: 08/14/2009 12:00:00 AM. When this person has a new assignment, for one day only, the extract does not pick up this person. See example below:
    Employee 123 has a supervisor change and the new supervisor is effective on 6/15/2009
    Emp Eff Start Date Eff End Date Supervisor
    123 01/01/2009 12:00:00 AM 06/14/2009 12:00:00 AM 888
    123 06/15/2009 12:00:00 AM 12/31/4712 12:00:00 AM 555
    When the ETL runs on the night of 6/14/09 at 7:35:42 PM, this record does not get picked up because according to the apps.per_all_assignments_f table on the day of 6/14/09 this person does not have an active assignment. There is one day when the person (according to the system) does not have a supervisor. The next night, on 6/15/09 10:34:18 PM the record reappears and does so every night until the assignment record is again end dated. This only occurs for future dated HR changes.
    This is a big problem because if the future dated change is for a supervisor, not only does the supervisor not appear in the daily snapshot, but either does any of his/her subordinates. Has anyone else run into this problem? How did you solve it? Did you customize all the HR mappings?

    Have posted an updated version of the MST to my webspace here:
    http://homepage.ntlworld.com/minkus/shockwave/shockwave115606mst2.zip
    This new version fixes the following issues (changes to this version in bold):
    MsiInstaller repair & errors on first run as non-admin (removes 'AppData' directory entries)
    DCOM errors once Shockwave is installed (adds double quotes to the beginnning of LocalServer32 value)
    Incorrect TypeLib paths in the registry (fixed to use built-in [SystemFolder] property)
    Default CLSID description value missing (set to 'Shockwave ActiveX Control', as per the executable installer)
    Incorrect Shockwave 10 paths in the registry (fixed to use built-in [SystemFolder] property)
    Misspelt 'OptionalComponets' registry key (renamed to 'OptionalComponents')
    Missing .dcr, .dir, .dxr Content Type registry values (included in the executable installer)
    Fixed incorrect AppID registry key (set to use installer's [VERSION] variable)
    Removed 'Launch SWDNLD.exe' shortcut created in Programs subfolder (people don't want this - see here)
    I have tested this on my network and it all seems to work fine. Unfortunately my original plan to use the executable installer didn't work out as it does not include the Shockwave 10 compatibility components described here and here, so it looks like I'll have to keep this MST file up to date with the latest versions until Adobe fix the problems themselves...
    If you want to see the changes that I have made, load up Adobe's 11.5.6.606 MSI file in Orca, then use Transform / Apply Transform to apply the MST, and look for the entries in green.
    Please post any feedback to this thread, and I will try to respond if I can help!
    Chris Hill

  • Issue with Fiscal Year Varient Period modifications for 2012

    Hi All,
    Can you please advice how the Fiscal Year Varient modified periods be transported to different clients.
    The issue is, we have 2012 Periods already setup in DEV and transported to QAS and PRD, now the clinet came up with different periods for 2012. I have modified the periods as requested and captured them in transport.
    When the new transport was sent to QAS, the new periods are appended to the old periods, instead of replacing the old periods.
    any help is much appreaciated.
    Thanks
    Shasha

    Hi All,
    My issue has been resolved, we figured out that we need to delete the existing calender and capture that in transport and  then recreate the calender for 2012 with new periods and capture this in the same transport and this works.
    Instead of deleting the existing calender we changed the values before, which is the reason it was appedning the previous periods and the new periods.
    Thanks
    Smitha

  • Issue with Fiscal Year period - Variable

    Hello,
    I have requirement where I have two fiscal year variables selections available for the users. Both are independent to each other. FOR EX: A & B
    1ST Fiscal year period is straightforward. It is a single variable selection where User enters the fiscal year period then the Key figures data will be available to the user for that particular fiscal year what is selected in the variable screen.
    For ex: If user enters 01.2007 then the values will be only for that particular month/period
    However, the 2nd Fiscal year period user wants a Range (From and to). This is also a Single selection variable. Here user enters only TO value, which it should go and get the lower value from first variable screen and then it should take the higher value from the 2nd Variable screen and should calculate the result as a range.
    How this can be sorted? Can someone please help me to sort this Issue? If we need a customer exit, can you please give me some sample code?
    Thanks in advance
    Harish

    Hi,
    Create 3 variable
    One for from variable which will user input ZVAR1
    2nd to variable will be user input              ZVAR2
    3rd variable be variable exit type              ZVAR3
    In exit populate the VAR3 by reading the two user input variable.
    and use the option
    Try this:
    <b> when 'ZVAR3.
          if i_step = 2.
            read table I_T_VAR_RANGE into z_t_var_range
                            with key VNAM = 'VAR1'.
            read table I_T_VAR_RANGE into z_t_var_range1
                            with key VNAM = 'VAR2'.
                 ZE_T_RANGE-SIGN    = 'I'.
                 ZE_T_RANGE-OPT     = 'BT'.
                 ZE_T_RANGE-LOW     =  z_t_var_range-LOW
                 ZE_T_RANGE-HIGH     =  z_t_var_range1-LOW
                 APPEND ZE_T_RANGE TO E_T_RANGE.
                 clear ZE_T_RANGE.
          ENDIF.</b>
    Thanks,
    Debasish

  • Issue with using year-from-dateTime function

    Hi
    I am novice on XML and related technologies and as luch would have it I need to get a value in YYYY-MM-DD irrespective of input format.
    I am using the Xpath functions year-from-dateTime,month-from-dateTime etc to split up the input value and put the net in the required format.
    When I am trying to use fn:year-from-dateTime to get year from a variable that consists of "29/07/09" as below
    {color:#0000ff}*<xsl:value-of select="fn:year-from-dateTime(xs:date('29/07/09'))">*{color}
    where 'fn' prefix refers to http://www.w3.org/2005/02/xpath-functions
    and 'xs' prefix refers to http://www.w3.org/2001/XMLSchema
    and I am getting below error while running transformation from java...
    {color:#ff0000}*'The first argument to the non-static Java function 'date' is not a valid object reference.'*
    FATAL ERROR: 'Could not compile stylesheet'{color}
    I dont know of any method "date" in java
    Can any body help me on this...I have been breaking my head on this since yesterday..

    "BJWILD" <[email protected]> wrote in
    message
    news:g7dqkq$bqn$[email protected]..
    > Im trying to create a functino that takes an array as a
    parameter and give
    > it a
    > default value of an empty array however im getting 1047:
    Parameter
    > initializer
    > is unknown with a number of ways I have tried.
    >
    > eg:
    >
    > public function foo( myArray:Array = [] ):void{
    > // do stuff with the array
    > }
    >
    > generated this error:
    > 1047: Parameter initializer unknown or is not a
    compile-time constant.
    >
    > using myArray:Array = new Array() gives the same
    error...
    >
    >
    > Anyone else come across this?
    try
    public function foo(myArray:Array=null):void{
    if (myArray==null){
    myArray=new Array();
    not sure why what you tried isn't working, but this is one
    way arround it...

  • Issue with Fiscal Year Period in Custom Extractor

    We have a custom extractor that pulls posting period (PERIO) and Fiscal Year (GJHAR)...once we move it to BW we do a concatenate in the transfer rules to get Fiscal Year / Period.  Before we did the ERP Upgrade the concatenate worked and then  after the Upgrade it stopped working.  I have checked RSA3 and the extractor is not pulling the fields any differently then before.  I have also tested the same concatenate in our development system and it is working.  Does anyone have any idea what might be happening? 
    Before we were getting data that looked like 2008001 and now thet data is saying 8  1200.
    We also have another custom extractor that does the exact same thing and it is working!
    We are stumped....can anyone assist?
    Thanks!
    Caroline

    I dont understand why you had to extract period and year?
    Can you pl explain. Do you have other fields in the extractor, if so what are they?
    Can you paste your code here to look at.
    Ravi Thothadri

  • Problem with Fiscal Year/Period

    Hi Expert,
    I am facing an issue with Fiscal year/per in my query. User is running the report on web. When he enters Fiscal year and period in selection screen, the report fetches correct data, however if I go to the information tab, there the value of the fiscal year/per is wrong. e.g. The user enters 010 2007. The report fetches 010.2007 data only but in the information tab, the value of the variable is shown 010.2008
    Please help me in identifying the issue.

    There might be one more variable in the query which is not of type ready for input.
    Fiscal year/per  can be the name of two variables in the query.
    Check in the query if you have one more variable.
    Hope this helps.

  • Issue with substitution variable with @MDSHIFT in BR in Calc Manager

    Hi Experts,
    We have a BR in EAS which is working fine.
    and exported to Calcmanager, now while validation it is giving error "@BaseScenario" is not found.
    the code is
    @MDSHIFT("LFLSalesIncVAT_GBP_C_DHP"->&BaseScenario->"Final"->"CD_FinalPlanPL",-1,"Year",,1,"Period",);
    if i hard code it like @MDSHIFT("LFLSalesIncVAT_GBP_C_DHP"->"P7PP"->"Final"->"CD_FinalPlanPL",-1,"Year",,1,"Period",); working fine.
    is there any limitation with calc manger and substitution variables?
    Thanks
    GP

    There seems to be many issues with validations in calc manager, does the rule run if you dont validate.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Is there an issue with the hitachi hard drives in the MacBook Pro's ?  Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue.

    Is there an issue with the hitachi hard drives in the MacBook Pro's ?  Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue. Other drive I have had have lasted at least 5 or more years.

    there is a dylib you can put in the springboard if jailbroken but if not you have to find an apple store

  • I've been using LR with my Nikon D3200 for a year or so. Shooting in RAW/NEF no issues with import etc until I updated LR and now I can't get LR to allow me to select when I try to import. It does show the images but they're grayed out and not able to be

    I've been using LR with my Nikon D3200 for a year or so. Shooting in RAW/NEF no issues with import etc until I updated LR and now I can't get LR to allow me to select when I try to import. It does show the images but they're grayed out and not able to be selected. Any thoughts? TIA

    Greyed imaged in the Import dialog box mean you have already imported the photos into Lightroom, so there is no need and no benefit to importing them a second time.
    Just go to the Library module, search for the desired photos, and resume working on these photos.

  • Just wondering what Apple's stand is on the issue with a flickering and a dark area appearing on imac 27"screen - forums seem to indicate this is not uncommon - and happens through normal use - so should be subject to repair (Sale of Goods Act - 6 years)

    Just wondering what Apple's stand is on the issue with a flickering and a dark area appearing on imac 27"screen - forums seem to indicate this is not uncommon - and happens through normal use - so should be subject to repair (Sale of Goods Act - ie 6 year warranty)

    We are just users like yourself.  If Apple has stated publicly about the problems you mentioned, it will be listed on their website and/or in one of their Knowledge Base Articles.
    I have a 27" & do not suffer from such a problem.  You should keep in mind that these are technical support forums. Generally, the only people posting here are those with problems. The thousands/millions without problems don't ever come here. 
    Think of these forums as a hospital emergency room. 

  • Issue While Terminating a Service Contract with future date

    Hi CRM Gurus,
    We are in Oracle EBusiness Suite version R12 (12.1.3) and implementing service contracts for a client.
    Please help us with the following issue that we are facing while terminating  a service contract line with future date (end of the month).
    Example :
    A Contract 123 with 10 months of duration (Start Date:01-JUL-2013 and End Date: 30-APR-2014) has a service line 1.0 with unit price as $50 for a period of 10 months .The billing schedule is set for 10 months with each month for $50.
    The create main billing is run for the month of Jul 2013 and Aug 2013 and is sent to AR.Now we want to terminate the contract line with 30-Sep-2013 as termination date without any credit back to the customer so that we want to charge for month of Sep as well for $50.
    When we give 30-Sep-2013 as termination date and terminate the line, the billing schedule refreshes with $50 for Jul1-Jul 31 and $50 for Aug1-Aug31 and $48.39 for Sep1-Sep 29 instead of  30-Sep which is the termination date that we see on the line.
    The requirement is that we want to have the  billing for $50 even for the month of Sep,but the system only calculates for $48.39(which is 1 day minus) for the month of Sep. When we give Oct 1 as termination date ,then we get the schedule dates and amounts correctly i.e. 01-Sep to 30-Sep for $50.
    How do we achieve to bill for $50 when we put 30-Sep-2013 as termination date ? I see that the regular termination process does not consider timestamp while providing the termination date.
    Is this a bug or is there a patch for this or is there a workaround for this other than providing 01-Oct as termination date ?Please help.
    Regards,
    Sandeep Gorla

    Update the Ar Interface Table with  value 50$ for that record, before the Invoice gets created.

  • Are there widespread issues with macbook pro lcds having to be replaced on computers less than a year and a half old

    are there any know issues with respect to lcd displays going bad on macbook pros. my computer which sits on a desk and has never traveled outside the home needs a whole new lcd replacement. Its a year and three months old.Pretty bad for an expensive laptop

    Welcome to the Apple Support Communities
    Some MacBooks Pro with Retina display have got problems with the display, related to a display manufacturer. However, in this case, it's a common issue and Apple is replacing or repairing all of these computers for free.
    In your case, probably it was bad luck. Computers fail, and maybe you have bad luck and your computer has got a defective part that has to be replaced. Fortunately, this rarely happens, and most of the users are happy with their MacBooks Pro

  • Has anyone else been having hard drive issues with 13" MacBook Pro barely a year old?

    Has anyone else been having hard drive issues with 13" MacBook Pro barely a year old?

    Yes, BUT...
    ... there are many problems that are really easy to eliminate by replacing the Hard drive, including ones that have nothing to do with actual Drive Hardware failure. These include corrupted install of Mac OS X, its EFI partition, clobbered partition tables, or the appearance of Bad Blocks in a critical area.
    Any of these problems can sometimes be eliminated by re-initializing the entire drive and writing Zeroes, and re-installing from scratch. The trouble is, this process takes hours to complete, and is not guaranteed to be successful -- you may still need a new drive after all that effort.
    I learned from my Plumber that consumers have no appetite for solutions that might work, and detest return visits for any related problems whatsoever. You or your friend may have had your drive replaced, not because it actually failed, but because the situation was troublesome, and the provider thought you would not tolerate anything less than a crisp, complete fix on the first attempt. And based on the cost of technician time, it may have even been cheaper that way.

  • Hey guys ive got issues with my macbook pro that i bought not a year ago, and for the last week its just randomly restarting especially when im watching a video or using finalcut pro x can someone help me?

    hey guys ive got issues with my macbook pro that i bought not a year ago, and for the last week its just randomly restarting especially when im watching a video or using finalcut pro x can someone help me?

    What do you mean "Leave them my laptop again"? do you mean you have had it worked on before? for the same problem or a different one?
    You need to take it in to Apple ASAP. No matter how long they have it, you want it fixed and fixed correctly.
    top_cheese_1 wrote:
    i bought it june 2012.. still on the warranty. i just didnt wanted to leave them my laptop again, but ok if you think thats what i should do..

Maybe you are looking for