MDT Wizard in installed OS

Hey,
I am having problem with MDT wizard in SCCM Task Sequence.
The Tasksequence ist started from currently installed OS (no PXE boot).
Then I try to display a wizard used like it is in MDT (see screenshot).
Unfortunately the wizard runs correctly (I see this in task manager running as system and in WinPE it works), but is not show to the current user.
I already tried to show it as a different account. This is working if the specific account is currently logged on.
If another account is logged on it of course is not shown to current session but to the other users session.
I think when I turn off UAC it will work, too - But based on security this is nothing I would like to do.
Does anyone know how to show up a wizard to currently logged on user?
This is the screenshot from TS-Step:
Thank you for help

Hi,
To be able to show a HTA from a Task Sequence you must use something that can show it like Serviceui.exe from MDT that are able to display the HTA in the user context. Here is an example on how to use ServiceUI.exe
http://ccmexec.com/2012/10/block-installation-of-non-supported-computer-models-in-configmgr/
Note that you must use the correct version of it that matches you architecture x64 or x86.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Similar Messages

Question on how to Hide the User Name, Password, and Domain fields in the MDT Wizard

MDT 2012 U1
Deploying Windows 7 via Offline Media (ISO) to MS Virtual PC's
I am looking on how to Hide the User Name, Password, and Domain fields which are prepopulated in the MDT wizard via the CS.ini (Not so concerned about the Domain field as I am User Name and Password)
We do need the Computer Name and OU fields to be seen, so skipping the wizard is not a option
The client just does not want these fields to be seen by the end users, they dont want them to even know the account name used for adding the machine to the domain, of course the password is not displayed but it must not be displayed either.
But since we use the fields they must still be fuctional just not seen.
Thanks.....
If this post is helpful please click "Mark for answer", thanks! Kind regards

You shouldn't have to edit DeployWiz_Definition_ENU.xml. You should only need to add "SkipAdminPassword=YES" to the CS.ini file and your authentication information.
Example:
[Settings]
Priority=Default
Properties=MyCustomProperty
[Default]
OSInstall=Y
SkipCapture=NO
SkipAdminPassword=YES
UserID=<MyUserID>
UserPassword=<MyPassword>
UserDomain=<MyDomain.com>
SkipProductKey=NO
SkipComputerBackup=YES
SkipBitLocker=NO
-Nick O.
Nick,
SkipAdminPassword=YES is for:
You can skip the Administrator Password wizard page by using this property in the
customsettings.ini.
I am hidding the Username/Password/and domain field in the computer name Wizard pane which is read from the cs.iniDomainAdmin=xxxxx
DomainAdminPassword=xxxxx
DomainAdminDomain=xxxxxx
JoinDomain=xxxxxx
If this post is helpful please click "Mark for answer", thanks! Kind regards

Acrobat 9 Customization Wizard - Force Installed Language

Hi,
I'm using Adobe Acrobat 9 Customization Wizard to generate an .MST file to install Adobe Acrobat Pro 9 silently. I've selected in the wizard to install the product in French language. But when the product is installed, it's in English. The users have to manually change the setting in the Preference menu to get the French language.
Is that a "known" bug ? Is there a workaround for it ?
Thanks.
Alex Nguyen

first of all make sure the msi you create is indeed an English French and German installer and not just an English one.
Easiest way to check is to see the Acrobat setup file directory which should included 1031.mst 1033 and 1036 mst files as well as the Acrobat msi file.
The option you are referring to in the customization wizard only refers to the language during the installation, not the (UI) language of the installed application.
One way of installing the French version would be to use a command line pointing to the customized mst as well as the required language mst file:
msiexec /i AcroPro.msi TRANSFORMS="1036.mst;custom.mst" /qb (or /qn or whatever you like)
this will result in a french installation of Acrobat.

I am trying to install elements 12. the InstallShield wizard cant "install Shared Technologies

i am trying to install elements 12. the InstallShield wizard cant "install Shared Technologies. what do i do?

After about 60 min running the InstallWizard, the elements 12 finally was
successfully installed. I did nothing but wait a long time. No idea what
the problem was.
ww

MDT Wizard very slow to start when launching Litetouch.vbs

Hi,
For a few months, I have an issue when launching Litetouch.vbs, the Wizard initialisation il very slow. Normaly it takes 20 to 30 seconds to launch, now it takes about 4 minutes. The wizard hang 3 times for 1.5 minute. The problem is present on
many computers here and even on a brand new installed computer.
Something strange, when the Wizard have been launched a first time, then closed. The next time I launch Litetouch.vbs, I is fast (20 to 30 seconds).
When I check the LOG : C:\MININT\SMSOSD\OSDLOGS\BDD.log, the lines that seems to hang are :
<![LOG[Property definition is now = BDD_Welcome_ENU.xml]LOG]!>
<![LOG[Property definition is now = WelcomeWiz_Initialize.xml]LOG]!>
<![LOG[Property definition is now = DeployWiz_Definition_ENU.xml]LOG]!>
Does anyone have an idea what can be the problem ?
Thanks!
Dominic

The lines that are running slow above are when MDT is trying to write to the variables.dat file. There is nothing special about this operation, it's just reading/writing to a text file.
I still think there is something else on this machine that is causing the litetouch.wsf scripts to run slowly. Perhaps you have some anti-virus programs causing problems.
Best way to isolate the problem is to load a clean version of windows on a machine (without any corporate apps), and try running MDT litetouch again.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

MDT / UDI not installing applications

I have an OSD task sequence and I have inserted some MDT components to utilize UDI for changing the computer name and installing applications. I am able to change the computer name and install packages successfully using the UDI Wizard but I cannot
install applications.
The task sequence fails on the 'Convert list to two digits' step, if I disable this step then the task sequence will complete but no applications will install.
I have tried creating new applications and they appear in the UDI Wizard but again nothing installs.
Any help is greatly appreciated, I can post any logs/screenshots needed.

Unfortunately I do not see a ZTICoalesce.log, only a ZTIGather.log and ZTISCCM.log but neither seem to show any errors.
The task sequence appears to fail on the 'Convert list to two digits' step. When I disable this step in the task sequence, the task sequence completes successfully and the package installs but not the applications.

Error in Configuration Wizard after installing SharePoint 2013 Service Pack 1

Windows Server 2012 with latest updates and SharePoint 2013 with latest updates:
I installed SharePoint 2013 Service Pack 1 and when I run the configuration Wizard i get this error:
Error in Configuration Wizard
Resource id to be retrieved is PostSetupConfigurationFailedEventLog for language English (United States)
Resource retrieved id PostSetupConfigurationFailedEventLog is Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review the extended error information
located at {0}, fix the problem, and run this configuration wizard again.
Leaving function StringResourceManager.GetResourceString
Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review the extended error information located at C:\Program Files\Common Files\Microsoft Shared\Web
Server Extensions\15\LOGS\PSCDiagnostics_3_8_2014_23_55_49_686_1872915373.log, fix the problem, and run this configuration wizard again.
In event view I see this two errors:
1) First error
System
Provider
[ Name]
SharePoint 2010 Products Configuration Wizard
EventID
104
[ Qualifiers]
0
Level
2
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2014-03-08T21:41:59.000000000Z
EventRecordID
135580
Channel
Application
Computer
ABC-SRV-WEB01.abc.local
Security
EventData
Failed to initiate the upgrade sequence. An exception of type System.MissingMethodException was thrown. Additional exception information: Method not found: 'Void Microsoft.SharePoint.WorkflowServices.IWorkflowService.Upgrade(System.Object,
System.String, Microsoft.SharePoint.Upgrade.SPLog)'. System.MissingMethodException: Method not found: 'Void Microsoft.SharePoint.WorkflowServices.IWorkflowService.Upgrade(System.Object, System.String, Microsoft.SharePoint.Upgrade.SPLog)'. at System.RuntimeTypeHandle.GetTypeByName(String
name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type) at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError,
Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName) at System.Type.GetType(String typeName) at Microsoft.SharePoint.Utilities.SPTypeSerializer.DeserializeType(String typeName,
Guid classId, Boolean bResolveMissingTypes) at Microsoft.SharePoint.Administration.SPConfigurationDatabase.ResolveObjectAndClassVersions(SPLog log) at Microsoft.SharePoint.Upgrade.SPManager.BootStrap(Guid sessionId, SPUpgradeOperationFlags flags) at Microsoft.SharePoint.PostSetupConfiguration.UpgradeBootstrapTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
2) Second error
System
Provider
[ Name]
SharePoint 2010 Products Configuration Wizard
EventID
100
[ Qualifiers]
0
Level
2
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2014-03-08T21:41:59.000000000Z
EventRecordID
135581
Channel
Application
Computer
ABC-SRV-WEB01.abc.local
Security
EventData
Configuration of SharePoint Products failed. Configuration must be performed in order for this product to operate properly. To diagnose the problem, review the extended error information located at C:\Program Files\Common Files\Microsoft Shared\Web Server
Extensions\15\LOGS\PSCDiagnostics_3_8_2014_23_41_9_710_572545016.log, fix the problem, and run this configuration wizard again.
Please advise on next steps.
How can I successfully install SP1?
Thanks,
Alex

could you please share the upgrade log file, so that we understand the error?
did you reboot your server after the installation of SP1?
also try to clear the Config cache on the servers and then try again?
you can run this command on the server its failing
Get-SPProduct -local
PSConfig.exe -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -cmd installfeatures
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Invalid Serial Number when using Customization Wizard to install Acrobat 8

Hello. I'm trying to install Adobe Acrobat 8 Professional using the Customization Wizard to create a transform. The serial number is for the volume license product, and I put this number in the space provided in the Wizard. Whenever I remotely deploy the msi file and the user opens the program, I get the following error: "You have entered an invalid serial number. Please reinstall Adobe Acrobat 8 Professional and enter in a valid serial number when asked." The program then closes. This does not happen when I install from the CD.
Each of the workstations is a Gateway E-4500S running Windows XP SP2. Adobe Acrobat 7 Professional is uninstalled prior to installation of Acrobat 8, and Acrobat 8 exists alongside Adobe Reader 8.1.1. No other Adobe products are installed apart from Flash Player.
The following are the contents of the setup.ini file:
[Startup]
RequireOS=Windows 2000;Windows XP
RequireMSI=3.0
RequireIE=6.0.2600.0
CmdLine=/sall /rs
[Product]
msi=AcroPro.msi
Languages=1033;1031;1036
1033=English (United States)
1031=German (Germany)
1036=French (France)
CmdLine=TRANSFORMS="AcroPro.mst"
[Windows 2000]
PlatformID=2
MajorVersion=5
ServicePackMajor=4
[Windows XP]
PlatformID=2
MajorVersion=5
MinorVersion=1
ServicePackMajor=2
[MSI Updater]
Path=WindowsInstaller-KB893803-v2-x86.exe
I've tried editing the setup.ini file to indicate the full path to the mst file, to no avail. Pretty much at the end of my rope right now. Any suggestions? I'll be happy to provide further information.

Chris Benton - 4:40am Jan 29, 08 PST (#2 of 2)
Correct. The CD installation goes without a hitch. I'm using Attachmate WinInstall to try to deploy the software remotely. It worked fine for Adobe Reader 8.1.1, but it's been a bear for Acrobat 8. I'd be okay with a straight CD installation if it didn't involve fifty machines.

System exception running Configuration Wizard after installing several security updates for SP

Greetings,
Have a 2 server farm, SharePoint 2013 SP1, SQL and SharePoint. Windows Update has 15 updates downloaded and ready to install, 2 Server 2012 updates and 2 SharePoint updates, 11 Security Updates for SharePoint. So, I said yeah, go ahead and install them late
last night when I figured it wouldn't interrupt folks. (dumb move)
Windows Update took awhile, but no errors during the install. Rebooted the server as required. Once the server was back, jumped onto the server console and ran the Configuration Wizard to apply the updates to SharePoint. No problem, progressed through the
screens saying it was going to update, farm and sql information, etc. Config Wizard was going through the steps, then failed with the message: "Failed to register SharePoint services." and here's a link to the configuration log so have a jolly time
tracking it down, thank you very much.
I found the error in the log (down about 10,000 lines):
04/10/2015 03:00:02 12 ERR Task services has failed with an unknown exception
04/10/2015 03:00:02 12 ERR Exception: Microsoft.SharePoint.SPException ---> System.Runtime.InteropServices.COMException: <nativehr>0x80131904</nativehr><nativestack></nativestack>
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListsWithCallback(String bstrUrl, Guid foreignWebId, String bstrListInternalName, Int32 dwBaseType, Int32 dwBaseTypeAlt, Int32 dwServerTemplate, UInt32 dwGetListFlags, UInt32 dwListFilterFlags, Boolean bPrefetchMetaData, Boolean bSecurityTrimmed, Boolean bGetSecurityData, Boolean bPrefetchRelatedFields, ISP2DSafeArrayWriter p2DWriter, Int32& plRecycleBinCount)
at Microsoft.SharePoint.Library.SPRequest.GetListsWithCallback(String bstrUrl, Guid foreignWebId, String bstrListInternalName, Int32 dwBaseType, Int32 dwBaseTypeAlt, Int32 dwServerTemplate, UInt32 dwGetListFlags, UInt32 dwListFilterFlags, Boolean bPrefetchMetaData, Boolean bSecurityTrimmed, Boolean bGetSecurityData, Boolean bPrefetchRelatedFields, ISP2DSafeArrayWriter p2DWriter, Int32& plRecycleBinCount)
--- End of inner exception stack trace ---
at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
at Microsoft.SharePoint.Library.SPRequest.GetListsWithCallback(String bstrUrl, Guid foreignWebId, String bstrListInternalName, Int32 dwBaseType, Int32 dwBaseTypeAlt, Int32 dwServerTemplate, UInt32 dwGetListFlags, UInt32 dwListFilterFlags, Boolean bPrefetchMetaData, Boolean bSecurityTrimmed, Boolean bGetSecurityData, Boolean bPrefetchRelatedFields, ISP2DSafeArrayWriter p2DWriter, Int32& plRecycleBinCount)
at Microsoft.SharePoint.SPListCollection.EnsureListsData(Guid webId, String strListName)
at Microsoft.SharePoint.SPListCollection.get_Count()
at Microsoft.SharePoint.Administration.SPAdministrationWebApplication.get_HealthRules()
at Microsoft.SharePoint.Administration.Health.SPHealthAnalyzer.RegisterRules(Assembly assembly)
at Microsoft.Office.InfoPath.Server.Util.HealthAnalyzerRegistration.RegisterHealthRules()
at Microsoft.Office.InfoPath.Server.Administration.FormsService.Update()
at Microsoft.SharePoint.PostSetupConfiguration.ServicesTask.InstallServiceInConfigDB(Boolean provisionTheServiceToo, String serviceRegistryKeyName)
at Microsoft.SharePoint.PostSetupConfiguration.ServicesTask.InstallServices(Boolean provisionTheServicesToo)
at Microsoft.SharePoint.PostSetupConfiguration.ServicesTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
So I've been searching around trying to find a clue about this. I tried using PSConfig as well, no dice. I tried using my admin account, the farm account, and the initial setup account, no dice. So I gave in about 3:00 AM and took a break, rather than have
my head hit the keyboard. Left IIS down and SP down. Had some help this morning when someone started things back up for me. sigh. So the users have been in on the sites and doing all sorts of important and critical things, so rolling back to the last
backup is the last, last resort. (Fortunately, I did do a manual backup using a PowerShell script before starting all this.)
Help. Please.
The actual sites are up and seem to be working fine. Central Admin is down though, get a 500 Internal Server Error in the browser, so things aren't correct. Duh. The config wizard didn't finish.
Thanks much,
Steven

0x80131904 translates to COR_E_SqlException. Typically this will be an MDF/LDF file out of space, or the volume that those files reside on being out of space. Check that first, then also check the SQLERROR log file for any issues.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

MDT Application Package Install - Weird issue.

Hi Guys,
I've configured Windows 8.1 into MDT 2013 and everything seems to be going smoothly up until I try to stream Office 2013 365 into the image. I looked into the bdd.log on the machine as it attempts to run it but fails and I'm seeing this -
Using a local or mapped drive, no connection is required. ZTIApplications 2/13/2014 9:20:29 AM 0 (0x0000)
Change directory: Y:\Applications\Microsoft\Office\Microsoft_Office_2013\CTR ZTIApplications 2/13/2014 9:20:29 AM 0 (0x0000)
WARNING - unable to set working directory: (-2147024893) ZTIApplications 2/13/2014 9:20:29 AM 0 (0x0000)
Run Command:
bddrun.exe cmd.exe /c InstallOffice365CTR.bat ZTIApplications 2/13/2014 9:20:29 AM 0 (0x0000)
ZTI installing application ZTIApplications 2/13/2014 9:20:29 AM 0 (0x0000)
About to run command:
bddrun.exe cmd.exe /c InstallOffice365CTR.bat ZTIApplications 2/13/2014 9:20:29 AM 0 (0x0000)
Command has been started (process ID 2540) ZTIApplications 2/13/2014 9:20:29 AM 0 (0x0000)
Return code from command = 1 ZTIApplications 2/13/2014 9:20:29 AM 0 (0x0000)
Application Microsoft Office 2013 Install Script returned an unexpected return code: 1 ZTIApplications 2/13/2014 9:20:29 AM 0 (0x0000)
I'm pretty sure I can map Y: to the applications directory and fix this -- but my question is why is everything else pathing correctly to the network path but this install assumes that Y: is where it's stored? I'm about to recreate it completely to
see if it solves the issue. It's most definitely failing because Y: is not mapped but it's looking to a mapped Y: path. MDT is not showing a source directory on the package created. Same goes for the applications inside of the package being
installed. Any ideas? Thanks.
Ryan

Some install programs just don't like installing from UNC paths. It sucks. We also need to ensure that we have the correct credentials to connect to the network path.
MDT works around these limitations by taking the UNC path for programs in ZTIApplications, and mapping a drive to the path. This action also uses the credentials to map the drive to the UNC path. Super!
If MDT detects that a UNC path is *ALREAD* bound to a drive letter, it will skip over the step of mapping a new drive letter to the path, and use the path instead.
*THAT'S* why MDT is attempting to use Y:.
What we have not determined here is if Y:\Applications\Microsoft\Office\Microsoft_Office_2013\CTR actually exists when Y is mapped to the path in your applications entry.
Please check again, and then re-check, and if you are unsure, check permissions, and double check again. Then from a client machine map to a share and verify again.
I also can't check what your script is doing. Did it actually run? Do you have any logging in the script. Most likely the script never ran, and the 1 return code is because cmd.exe can't find the script.
Keith Garner - keithga.wordpress.com

[SOLVED] MDT 2013 - Package install (offline updates) - how to make it work?!

Hello.
Lack of documentation about offline update is really weird.
I've installed WSUS, approved updates for Windows 7, made Package subfolder "WSUS_updates" at MDT 2013 and point it to c:\WSUS\WsusContent folder and got 160 updates as cab or msu files. Made MDT Selection Profile "WU" pointed
to Packages\Wsus_updates.
After that I've add new step to task sequence (fully tested many times before) to Preinstall\Install updates offine, just after "Inject drivers", with "WU" selection, fully update MDT share even with images regeneration,
replaced new images at WDS.
Test run - no one update got to OS during deployment!!
and Final step shows 0 errors and 0 warnings.
Really frustrated about this.
Need any advice.
thank you.
-=C U=-

THe BDD.log shows:
About to run command: dism.exe /Image:C:\ /Apply-Unattend:C:\Windows\Panther\Unattend.xml /ScratchDir:C:\MININT\Scratch
Command has been started (process ID 1960)
Console > Deployment Image Servicing and Management tool
Console > Version: 6.3.9600.16384
Console > Image Version: 6.1.7601.17514
Console > Error: 0x800f082e
Console > DISM failed. No operation was performed.
Console > For more information, review the log file.
Console > The DISM log file can be found at X:\WINDOWS\Logs\DISM\dism.log
Return code from command = -2146498514
FAILURE ( 5627 ): -2146498514 0x800F082E: Run DISM.exe
Can you check the dism.log file?
I suspect that your unattend.xml file has some errors.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Install Shield wizard not installing

When I download jre the install shield wizard get to configuring installer then
disappears and never installs jre

When I try to install game"command & conquer" i get error 1607. What causes this problem and can i fix this situation?

MDT 2013 UDI install Application list SCCM 2012 R2

Hello,
did anyone have an idea how i can add all my application from sccm to the mdt udi install application list ?
I don´t want to add every single application.

If you haven't found your answer yet, here is a great video that will show you how to do exactly what you are asking about, among other things.
https://www.youtube.com/watch?v=off-VGYZIEo

MDT/WDS Keep installing OS on the wrong disk, can't figure out why ?

Everything in Task Sequence and Unnatend.xml is set to install to
Disk0 parition 1 (as default is)
New Dell PC out of the box comes with two Disks (1 HDD and 1 SSD)
SSD is Disk0 (Checked the motherboard and BIOS to see what disk are what) - 1st Boot priority
HDD is Disk1.
After booting from PXE/WDS and watchng Light Touch Installation progress I
SEE it says Preparing Disk0 under the progress bar.
After first reboot it boots to Disk0 as as it should and then it says no boot loader found.
If i go to boot options and Boot from Disk1 it boots to Windows and conttinues with deployment.
If I disconnect Disk1 from motherboard it all installs perfectly.
Why is this happening ?

Add the raid drivers first, not convinced it will help but give it a go (You should add them anyway).
If not, I believe Mark Thomas' solution should help you out.
https://social.technet.microsoft.com/Forums/en-US/45d51409-7853-4d95-9db3-400a047f03e3/osd-and-sata-drive-enumeration-trouble?forum=configmanagerosd
Thanks,

Will Toshiba recovery wizard re-install Windows 7

I have Toshiba satellite p750 03t with Win 7 home premium and I want to restore my laptop to factory settings/state. I Used Toshiba Recovery Disc creator and burned recovery image to 4 DVD's(4,7GB). What I wanted to ask is: Will recovery discs restore Windows 7 Home Premium too as it was when i turned on my laptop first time(a screen prompted asking for user name, company name etc.) and will I be able to burn recovery discs again( will the hidden image be placed on my HDD again)
Solved!
Go to Solution.

Nedeljko wrote:
I have Toshiba satellite p750 03t with Win 7 home premium and I want to restore my laptop to factory settings/state. I Used Toshiba Recovery Disc creator and burned recovery image to 4 DVD's(4,7GB). What I wanted to ask is: Will recovery discs restore Windows 7 Home Premium too as it was when i turned on my laptop first time(a screen prompted asking for user name, company name etc.) and will I be able to burn recovery discs again( will the hidden image be placed on my HDD again)
Update: I learned on the MS site that I have worm:Win32/Kaaneut.A worm. It lets Media Center take over, Restore system won't work, etc. I would like to try removing since I am having a problem un-stalling Win7.
Help again, Jerry (if you are there.) As suggested a day ago, I am going to re-install Windows 7 but because of the problem with the Media Center taking over my computer, I am more than confused now. I have all the discs suggested by Toshiba when I bpught it and have even did a re-install a few years ago. Now, I don't know where to start with these discs. I would appreciate any help. My Toshisa is a Satellite L555-S7005. Thanks, Gaye

MDT Wizard in installed OS

Similar Messages

Maybe you are looking for