MDX OLAP Universe does not allow for a Top 10 rank on measure.

Hello!
I am trying to Rank a measure by Top 10 in count on a MDX OLAP universe based on Web Intelligence. The rank works, however for all the zeros in the row values it gives the same rank and keeps on appending. I then tried to rank a measure with the MDX syntax in the SELECT statement of the measure itself. The syntax is as below:
<EXPRESSION>Rank([0MATERIAL__0MATL_GROUP].[LEVEL01].CurrentMember,
Order([0MATERIAL__0MATL_GROUP].[LEVEL01].CurrentMember.Level.Members
@Select(Exp Dem (Published)\Exp Dem (Published)),
@Prompt(u2018Top orBottomu2019,u2019Nu2019,{u2018DESCu2019,u2019ASCu2019},mono,constrained) ) )</EXPRESSION>
The XML is parsed because of the tags, however when using this measure in the query panel gives an error message for the prompt. Is there a way to rank a measure by Top 10 in the MDX statement above instead of the prompt for the Top/Bottom. I found the syntax in the OLAP Best practices guide.
Kindly revert for any possible solution. Any inputs are highly appreciated.
Thanks in advance!
Regards,
Vivek.
P.S.: I am specifically looking to Rank multiple measures by Top 10 count without displaying zeros / repetetive values.

Hi Ingo!
Thank you for responding! I have gone through the OLAP Universe best practices as suggested by the guide. However, the Ranking has an offset of repeating the ranks for same value metrics. So if I need a Top 10 and there are 3 zero values in the column, the ranking extends to Top 13. is there any way to hardcode this as a predefined filter in the Universe on the measure, which states that the rank stays limited to Top 10 irrespective of repeating values?
Kindly suggest if there is a work around for this!
Thanks in advance!
Regards,
Vivek.

Similar Messages

Imovie is limited to its import formats and does not allow for storing video in any rawformat. Which means all videos will contain lossy compression applied to the video-.with no way to edit full format video. Is this statement true?

Imovie is limited to its import formats and does not allow for storing video in any rawformat. Which means all videos will contain lossy compression applied to the video….with no way to edit full format video. Is this statement true? Does iMovie support HD 1080p @ 60 fps?

Iggy826 wrote:
… Is this statement true?
yes and no!
using the intended Import from Camera routines, iM converts automatically in its very own AppleIntermediateCodec. so, answer is yes.
but …
a) Apple claims , aic is non-lossy intermediate codec. working with proRes in FCPX taught me, there are even less non-lossy-ness codecs
b) iM offers an Archive feature, which is basically a simple Finder/copy operation which 'clones' your SDcards content into some folder on your harddrive; e.g. you can later use these untouched 'raws' in another editor such as FCPX. so, answer is no.
c) when you 'override' the import routines by manually re-wrapping mts into a mov container, iM handles the 'native' h264s ... so, answer is no.
d) adding any effect, transition etc. reduces any interlaced source to 540p. (if you're working with 720p source, res is kept) … so, answer is yes. or, in 720p case, no.
< Johnny Depp's voice >… savvy?
Does iMovie support HD 1080p @ 60 fps?
via Import from Camera? No.
via re-wrapped mts>>mov? I was told yes, some say no.
one thing to be kept in mind when talking about these 'issues':
iM, this 12€, is meant as a CONSUMER toy tool.
it supports AVCHD vers1 (=no 1080/60p, no >24Mbps, no 3D).
fingers crossed, we'll see soon some iM/QT/FCPX update for support of AVCHD v2 ........
the main consumer devices are within the specs, iM supports.
using professional equipments makes usage of professional software (FCPX, AP) optional.
sorry for lengthy answer.

Password Altering in SQL Dev 3 EA4 does not allow for non alphanumerics

As the password change syntax does not include quotation marks around the password, anything that contains non-alphanumerics results in invalid SQL.
You can also enter " characters in the password dialog which would allow for the following string:
"!test0" in the password text box would result in:
ALTER USER "TEST" IDENTIFIED BY "!PARIBAS_WORKSPACE_OWNER0"
With !test0 in the password dialog, you get this:
ALTER USER "TEST" IDENTIFIED BY !TEST0;
I would reckon that " is an invalid character in the password field and you always enclose the password in the generated sql in "'s?
Edited by: user12045690 on 03-Mar-2011 04:19

As the password change syntax does not include quotation marks around the password, anything that contains non-alphanumerics results in invalid SQL.
You can also enter " characters in the password dialog which would allow for the following string:
"!test0" in the password text box would result in:
ALTER USER "TEST" IDENTIFIED BY "!PARIBAS_WORKSPACE_OWNER0"
With !test0 in the password dialog, you get this:
ALTER USER "TEST" IDENTIFIED BY !TEST0;
I would reckon that " is an invalid character in the password field and you always enclose the password in the generated sql in "'s?
Edited by: user12045690 on 03-Mar-2011 04:19

I am trying to download...but the link does not allow for downloading ? !

I am trying to download the FireFox software but the page does not give me a link to execute ....I see the area for the down load but when I put my curser on it it does nothing

Try this page - http://www.mozilla.com/en-US/firefox/all.html

In upgrate 22 and 23.0 the bookmarks toolbar dissapears and after crashing firefox does not allow for recovery

I hate this new upgrade. I basically can't use this browser anymore. I only need firefox to do a few things correctly but if it cannot do these things I cannot use it 
1. If firefox crashes (which it does every 30 minutes it just closes completely) then I need for it to be able to restore / recover all previously opened windows when I start it back up again. It does not do this anymore. 
2. I use the bookmarks toolbar all the time but frequently it shows up completely blank. So now the only way I can see the bookmarks is if I go to options and deselect bookmarks toolbar and then reselect bookmarks toolbar.
This is so frustrating and worse you make it so you cant do rollbacks! That is insulting and makes me want to not use your browser. A browser is a critical tool not a toy but you guys won't stop playing with it.

Hi joshuad31,
Sorry you are having problems. It should not be crashing and should not be messing up your bookmarks. I do not have any such problems.
*If Firefox is actually crashing, as opposed to hanging then a couple of the Crash IDs would help.
** see [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]]
* if firefox has been frequently hanging and restarting offering the option to restore sessions then that has probably overloaded the session restore and you will need to delete the multiple copies of files.
** see [[Firefox hangs or is not responding - How to fix#w_delete-duplicated-session-restore-files]]'''_delete-duplicated-session-restore-files'''
** you will loose information doing that, normally I would suggest bookmarking the open tabs, but I am not sure that would work for you.
To get Firefox running again you may initially need to use Firefox's safemode and disable all your plugins. Or do a reset.
* [[Troubleshoot Firefox issues using Safe Mode]]
*[[Reset Firefox – easily fix most problems]] (Read the warnings before you try this)
I note you have VMware, scripting software and an enterprise edition extension. Is this machine used in an enterprise / corporate environment ?
I will deal with the bookmarks toolbar issue later, crashing/hanging is a higher priority.

Write File.vi does not allow for offset entry

I am using a Write File.vi to write data to my hard drive like always but I have never used the offset before and it is not allowing me to enter an offset value and the error message does not make sense. The error says you have wired different data types but then say source long, sink long which are the same in my eyes.
Is there a trick to using the offset?

If you are writing to file different data types, the use of input is not allowed because it depends on the number of bytes used to store the type (that's why it should be just one type)

Installer does not allow for shortcut changes or more than one

I have been trying to create a shortcut for the Start Menu and the Desktop. I can create the two shortcuts except they are exactly setup the same. I try to change one or the other and they both revert back to the original settings. In the attached images you will see that I change the subdirectory to nothing. When I come back to the shortcuts area, the subdirectory is back. If I create a second shortcut, it is the same as the first... I cannot change it.
photo 1: this is how it starts, default
photo 2: My changes... subdirectory is removed
photo 3: I leave the shortcuts area
photo 4: I return to the shortcuts area and the subdirectory is back.
If I create another shortcut, it will act exactly the same. Both shortcuts will be setup as the first photo. No changes stay.
What is going on here?
Attachments:
shortcuts_setup_anomaly.zip ‏161 KB

What LabVIEW version is this?
LabVIEW Champion . Do more with less code and in less time .

TS1347 Calendar does not allow for setting up appointments

I can't get my calendar to open and add appointments? I need this as o have a hectic schedule. Any ideas as what happened or how to
Fix this?
Thanks in advance!

You mean the Calendar app will not open? Try restarting or resetting your device.
http://support.apple.com/kb/ht1430

My Iphone 4 will not let me send an email or reply to an email. The message states it has put it in my outbox and it is rejected by the server because it does not allow relaying??? I can't seem to find an answer to fix this. Any help?

My Iphone 4 will not let me send an email or reply to an email. The message states that it has put my email in my outbox and that my server does not allow for relaying. Can anyone help with this? I have read some other answers and nothing has worked Thanks

Your email provider has blocked the standard mail port 25 for sending emails and is requiring a different port. This is to avoid mail relays that use mail clients to send spam. You need to find the port that is used by your provider for sending outgoing mail. Then change the settings in your email account on your phone to match the port. You will also have to provide some security credentials for the account.
You can also try deleting the email account from your iphone, and the adding the email account back as this will many times set the correct port for sending emails.
You could also do a Google search on the the settings for your device with your email provider. That will provide you with the proper settings.

Special G/L Indicator not allow for certain t-code

Hi all,
I need your help, why same special GL indicator does not allow for certain t-code? Is it possible? or is this a system limitation?
Error message as
special G/L transactions not defined for bills/exch. and down pmnts

Dear,
It is because some transactions to be posted directly to Gl and some through sub ledger, so you can look at the transaction code for configuring/ using the special gl indicators.
OBXR-Customer Special GL indicators
OBYR-Vendor Special GL Indicators
and
OBYN
FBKP

Noob question. SWF file runs as slideshow, does not allow navigation.

Hi. I run my own company, and hired a professional to design my website in Flash. I have the editable .fla file in my possession and given that what I need is really simple, I´d like to do it myself and start knowing the tool by reverse engineering an already built site.
My problem is this:
I need to update some text information, really simple, so I did open the .fla document in Flash CC and changed the text.
However, when I publish/export the .swf file, it runs in the browser as a slideshow, and it does not allow for navigation.
The animations run in a loop that cannot be stopped, and the buttons are disabled.
What am I doing wrong?
Thanks in advance.

Error one:
if (Link[ID] == undefined or Link[ID] == "") {
bttn.enabled = false;
} else {
bttn.enabled = true;
Error two:
if (isNaN(percentage) or percentage == 0) {
percentage = 0;
left.half._rotation = 0;
right.half._rotation = 0;
this._visible = false
} else if (percentage<=50 && percentage>0) {
left.half._rotation = 0;
right.half._rotation = (360/100)*percentage;
this._visible = true
} else if (percentage>50 && percentage<100) {
left.half._rotation = (360/100)*(percentage-50);
right.half._rotation = 180;
this._visible = true
} else if (percentage == 100) {
left.half._rotation = 180;
right.half._rotation = 180;
this._visible = false
I studied Graphic Design waaaaaay before everything was done in a computer, but I do have some rather limited computer skills.
I´d like to know, if at all possible, what caused this errors, so I can avoid making the same mistakes in the future.
All I did was change some text/update pictures in the flash file, how come the code got messed up?
Thanks so much for your time.

Have Yahoo Mail Plus, which does not allow ads. When on my work computer and log into my Yahoo account, ads do appear?? This does not happen on Explorer. Help

Have a Yahoo Mail Plus account, which does not allow for ads. It works fine on Explorer, but when used on Firefox the same ads always appear both at the top and left margins "Dr. Oz New Weight Loss Secret". Yahoo says it is a Firefox issue. Please help.

another thing you can try is to [[Reset Firefox – easily fix most problems|reset firefox]].
in case there are still adverts shown in places where they aren't supposed to be afterwards, it sounds like an issue with malware on the system. please run a full scan of your pc with the security software already in place and different tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes], [http://www.microsoft.com/security/scanner/default.aspx microsoft safety scanner] or [http://www.kaspersky.com/security-scan kaspersky security scan].
[[Troubleshoot Firefox issues caused by malware]]

HT204053 I changed my apple id, but my ipad does not allow me to change it for Icloud, so I can't edit my account so I can access Icloud. I was told at Apple store that I could use both Apple ids, but my old one is no longer recognized. Any suggestions?

I changed my apple id, but my ipad does not allow me to change it for Icloud, so I can't edit my account so I can access Icloud. I was told at Apple store that I could use both Apple ids, but my old one is no longer recognized on the appleid website, so my password for my old apple id won't work.
Any suggestions?

If you only changed the name of your ID rather than creating a new ID, just go to Settins>iCloud and tap Delete Account then sign back in with the new name. (Deleting the account from your phone does not delete it from iCloud. Your data will be synced back to your phone when you sign back in.)
If you created a new ID, you'll have to go to Settings>iCloud on your phone and turn all data you are syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on your iPhone. (If you are syncing iWork documents with iCloud, also open your iWork apps and turn off iCloud syncing and choose to keep the documents on your phone.) After everything is turned off, scroll to the bottom and tap Delete Account. Next, set up a new iCloud account using your other ID, then turn syncing for your data (contacts, etc.) back to On. When prompted, choose Merge. This will upload the data to your new account.
You won't lose any photos in your camera roll or photo library. If you have any photos in your photo stream that are over 30 days old that are not in your camera roll or saved on your computer, be sure to save these to the camera roll before deleting the account. To do so, open the photo stream album on your iPhone in the thumbnail view, tap Edit, tap all the photos you need to save to select them, tap Share, then tap Save to Camera Roll.

In Security, clicking on the "Saved Password" button displays your current saved password for each site. It does not allow you to change a password. How would you do that?

In Security, clicking on the "Saved Password" button displays your current saved password for each site. It only allows you to view and delete site passwords. It does not allow you to change a password. How would you do that?

If you enter a new password Firefox should offer to change the password.
*You may not need to delete the old password. Try "Refreshing" the page, entering the site again, you may need to let Firefox fill in the old password, then enter the new password, and Firefox should ask to save the new password. See:
**http://kb.mozillazine.org/Deleting_autocomplete_entries
*If you delete the old password, you may need to "Refresh" the site after deleting the old password.
If you want to delete the password that has been saved do the following:
#In the Tools menu select Options to open the options window
#Go to the Security panel
#Click the "Saved Passwords" button to open the passwords manager
#Select the site in the list, then click Remove
 
 
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe PDF Plug-In For Firefox and Netscape 8.3.0 (''Note: this is a very old version and installing the current version may not delete it or overwrite it. To avoid possible problems with having 2 versions installed on your system, you may want to remove the old version in Windows Control Panel > Add or Remove Programs before installing the new version'').
*Shockwave Flash 10.3 r181 (''this may be current but a new version was released on 2011-06-14 with a ".26" after the "181". You can use the Plugin Check below and/or look in Add-ons > Plugins for the version of Shockwave Flash that you have installed. The newest version will be shown in Add-ons > Plugins as "Shockwave Flash 10.3.181.26"'').
*Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml

Have tried to install icloud 4.0 for windows and again it does not allow syncing with outlook 2013 calendar and contact using windows 8.1 and IOS 8.02 (unexpected error)? I thought itunes 12.0 and icloud 4.0 would solve issue but still same result.

I have tried to install icloud 4.0 for windows and again is does not allow syncing with outlook 2013 calendar and contact, using windows 8.1 and IOS 8.02 (get - unexpected error)?

Having same issues. had been syncing every few days with outlook 2007 contacts and calendar but since updated to 4.0.2 and latest itunes I get an error that it is unable to sync. I can't seem to find any solution.

MDX OLAP Universe does not allow for a Top 10 rank on measure.

Similar Messages

Maybe you are looking for