Measure time of webservice

Hi,
I developed some webservices in ABAP and Java, now I want to make performance tests. Is there a tool that shows me how long the execution of the webservice took? It would be great if it could differ between time spent on BAPI execution, communication, ... I hope you can help me.
Kind regards,
Timo

Use a running or moving average of the pulse periods. (I am assuming that you are able to measure the time from one Hall pulse to the next for all the pulses). Since you want the speed based on five consecutive pulses, you really do not need the average, just the sum of the times. See the attached example in which the pulse frequencies are random but in the 4 to 50 Hz range you expect. Notice that the speeds are smoother than the pulse times.
Lynn
Attachments:
Motor Speed test.vi ‏13 KB

Similar Messages

Ni scope measurement time delay

使用niscope measurement 测量 time delay ，如何使测量更加准确，现在测出来的值的浮动范围很大，另，能不能提供其测量的具体算法编程

The PXI 1031 is just the chassis and power supply. It does not read anything. So I am guessing that the 5105 is doing the measurements.
What is the resistor value you are using to convert the current to voltage? Have you verified that the resistor is actually close to the nominal value? Is the voltage in the current loop within the common mode range of the measurement device? Do you have the loop grounded at two different points? Does the pressure actually exceed 62 bar? Does the current from the transducer actually go to 20 mA?
Your calculation is correct for a 1-5 V input corresponding to 0-100 bar.
You have several questions which all seem to be related to the same project. Do you have a good overall plan for the total project? Did someone sit down and create a specification for the hardware and the software? Have the various subsystems been designed in detail before you started developing code and buying hardware? Do you have a System Architect (Project Manager, or other title) who has a good overall idea of how this thing is supposed to work?
Without that you will likely continue to be frustrated and not too productive.
Lynn

Measure time of an measurement and if measurement time is less than 90 second wait until 90 second and then proceed to next steps or stop.

Hi
I am trying to make a program
      During execute a measurement count the time.
      If measurement time is more than 90 second proceed to the next steps (or stop the measurement)
      If measurement time is less than 90 second, wait until 90 second and then proceed to next steps or stop
I appreciate deeply if some help me.

What sort of measurement are you talking about? What affects the time of your measurement? The very basic description you have is of a state machine and there are numerous examples of that
1. Actually I would like measure the time of "Alignment" function done by wafer test equipment name Prober ( the model is "UF3000" made by TOKYO SEIMITSU CO., LTD.
2.. Right now the "Alignment" function is started when a GPIB command is written as "N" and wait for resposne 70 in polling.
Please refer to the attachment for Alignement function if it help you.
In the attahement
For Alignment error delay we are using =600
Alignment counter =30000
align loop cnt = 30000
This is a program wriiten by another person and he is not availabe any more. What I am trying to do is
1. During execute a "Alignment " function count the time.
2. If  "Alignment " function time is more than 90 second proceed to the next steps
3. If "Alignment " function is less than 90 second, wait until 90 second and then proceed to next steps
Attachments:
Alignment function.xlsx ‏153 KB

Best way to measure time?

I have labview 7.0 and SC-2345 with several digital inputs. I have to measure time between digital input(rise or fall)and stop signal comes in my program with compare etc.
I have tried to measure time with 4 sequences and "get date/time in seconds" and i have also tried to use loop with shift register.
It seems not to work or accuracy is not enough. so how to do that?

I am very sorry If you feel I came across unfriendly in any way, my intentions were sincere and I wanted to help you improve your code by pointing out some common mistakes. Believe me, some of my early labVIEW diagrams from 10 years ago are much worse. In the meantime I have accumulated some experience with daily use, but am still learning every day.
By the way, I an not affiliated with National instruments. This is mostly a peer help forum where LabVIEW users from all over the world help each other improve their coding skills. (Only users with blue names are employed by NI!)
Certain things are not obvious looking at your code and once the desired functionality is clear we can help you to a more optimized version that actually works. Whatever you are feeding to the "elapsed time" indicator has nothing to do with elapsed time, but counts the iterations of the middle while loop. It is either 1 or 2, depending on the inputs. There has to be a more interesting output (see my next post!).
For example, let's just look at your inner while loop (see attached image). (1) The number of iterations is known when the loop starts, thus a FOR loop is more appropriate. (2) You are comparing a DBL with an integer using "equal". If by chance the operator would enter a fractional time (e.g. 1000.5), the comparison would never become true and this loop would go on forever. Your program will never finish! Not good!
An alternative, but safe code is shown below in the image. For integer times, it has exactly the same functionality.
Apparently, you want to measure elapsed time, and I am guessing elapsed time used by the code in your middle loop. I will attach a simplified example based on your program in the next message here.
LabVIEW Champion . Do more with less code and in less time .

"Measurement time cannot be in the future ".

Hi Gurus
I am doing testing for a Computer manufacturing company.When i am trying do confirmation against a production oder via t code CO11N system giving the message "Measurement time cannot be in the future ".
Could you pls help to resolve this issue.
Regards
Sandip

Hi
Posting date is the current date.The details of the error given below.
Measurement time cannot be in the future
Message no. IR023
Diagnosis
The measurement time that you have entered is in the future.
A measurement reading describes an actual state, and therefore the measurement time cannot normally be in the future.
System Response
Processing will not be continued.
Procedure
Enter a measurement time in the past.
If this is an exceptional case, contact your system administrator.
Procedure for the system administrator
In exceptional cases, tolerances must be allowed in the entry of measurement times.
Example:
Measurements are taken automatically and are then transferred to the SAP System. The system time of the measurement system varies from that of the SAP System for technical reasons.
You can define an appropriate tolerance level in Customizing for each measuring point category.
Pls suggest some solution.
Regards
sandip

How to Measure time taken for a some lines of code in a program?

Hi
I have one requirement to measure time taken for executing a block of code in report . How we can find it ?
Is there any way to code something in report to caluculate it ?
Please send solution as early as possible
thank u

Ok.. try this code...
DATA : t1 TYPE i,
t2 TYPE i,
delta(16) TYPE p.
GET RUN TIME FIELD t1.
PERFORM get_data. "your block of code
GET RUN TIME FIELD t2.
delta = t2 - t1.
delta = delta / 1000000.
WRITE :/ 'Time elapsed : ', delta , 'Secs'. "time in secs.

How to measure time delayed measurement

Hi All:
I am using TDS3064 scope to measure time delay betwwen two channels (using IVI driver
complience package 2.2 for scope IVI driver). I look through drivers, but not able to find
delayed measurement function. Is there any alternate way to measure time delay betwwen two
channels. If possible please provide me example. I am new to LV programming.
Thanks
DBhagat

You have to understand something about IVI class drivers. To support portability, those functions that are common to a class are what you see in the driver. Some scopes might have the ability to measure time delay between trigger points on different waveforms but many don't. If there is such a function supported by your scope, then you can make a call to the instrument specific driver or a VISA Write/Read. Of course, you then loose the portability feature of IVI which, imho, is about the only reason to use IVI class drivers. What I would recomend is that you do a capture of both traces and then do an analysis of the raw data in LabVIEW. One way to do this is with Trigger Detection for 1 Channel (Analyze>Waveform Monitoring palette). Wire each channels data to the function and obtain the time for each trigger event. The function will return the time for each event that you can use to calculate the difference.

Measuring time in smaller unit than millisecond

I need to be able to measure time to a higher precision than Java provides. Is there any way that I can achieve this using a windows platform preferably?

Here is the code JNI C code:
JNIEXPORT jdouble JNICALL Java_Win32Native_queryPerformanceFrequency (JNIEnv *env, jobject obj) {
     LARGE_INTEGER lFrequency;
     ::QueryPerformanceFrequency(&lFrequency);
     return (jdouble)lFrequency.QuadPart;
JNIEXPORT jdouble JNICALL Java_Win32Native_queryPerformanceCounter (JNIEnv *env, jobject obj) {
     LARGE_INTEGER lpCounter;
     ::QueryPerformanceCounter(&lpCounter);
     return (jdouble)lpCounter.QuadPart;
}Here is the java code:
import javax.swing.JOptionPane;
import javax.swing.*;
import java.net.*;
import java.awt.*;
public class Win32Native {
   public native double queryPerformanceFrequency();
   public native double queryPerformanceCounter();
   static {
         System.out.println("Loading library...");
         System.loadLibrary("Win32Native");
         System.out.println("Loaded ok!");
   public static void main(String[] args) {
      Win32Native nat = new Win32Native();
      // You can call functions here as a quick test
      System.exit(0);
}

Measuring time in milliseconds

Hi,
I have to measure time in millisecond between two user events in Applet, so I did this:
Date startDate = new Date();
// Users answer some questions
Date endDate = new Date();
int timeElapsed = endDate.getTime() - startDate.getTime();It was all fine, until the users figured out to cheat this system: they changed their computer's clock before answering the final question.
So, is there any way to measure time in milliseconds and its independent from the computers clock?
Thanks!

meikop wrote:
Thanks!
I have a client - server application indeed.
So as I understand, there's no good solution on the client (applet) side only - there's no way I can measure exact time and not be worried about clients computer clock? Any theoretical explenation ?
Otherwise I have to mesure the time on the server side - I had it implemented some time ago:), but the clients started to complain about network latency etc so I decided to measure the time on the client side - not so good idea after all :)?
I'll probably have to calculate each clients average network latency and so on...
One can handle the client side clock being changed by the user by keeping a 'correction' in the client which is the difference between the client clock and the server clock. This way one only needs to update the correction at intervals - I use 1 minute update in my Bridge game. I don't need millisecond accuracy but it would not seem to be too difficult to correct for the network latency in calculating the correction.
P.S. You would do better to use System.currentTimeMillis() rather than construct a Date() object which actually uses currentTimeMillis() behind the scenes.

Measuring time between activation of two boolean

Hello
I want to measure the time elapsed between activation of two boolean variables/indicators. In my code I have DAQ acquiring 2 digital signals which trigger corresponding 2 boolean indicators. Now I am trying to measure time between the event when my first boolean indicator gets the signal and the event when my second boolean gets the signal. I am attaching my code. I checked DAQ and my indicators everything works fine, but just when I try running the code with the 'elapsed time' part, its not running. Any help will be appreciated.
Thank You.
Attachments:
Test Code.vi ‏45 KB

So, feel free to give more detail. I'll just give you a couple thoughts:
1) The primary issue with your code is that it probably doesn't do what you think it does. How this VI will run is that it will get one data from the DAQmx routine, then pretty much stay in the inner while loop since the event structure has an indefinite timeout. Worse, I don't think changing the value of the boolean controls would trigger the value changed event anyways. In the end, you don't even need the Event Structure to do what you want to do, nor do you need the inner while loop. Just check the values for each iteration of the outer while loop instead and do what you need to do with those.
2) You are acquiring only one data point at a time. Which is OK if your events are particularly slow with respect to the effective sampling rate of the of loop (which might be able to pick up signals that change on the order of milliseconds or perhaps a bit less). If your signals are faster, you need to think about reading lots of samples at a time (arrays of booleans) and properly triggering your acquisition close to the event it needs to pick.
3) If your signal is a pulse, make sure that the pulse width of the signal is much longer than than 1 / sampling rate. If it isn't, you could miss the pulse entirely doing this approach.
4) The faster signals (as long as your have a quick enough sampling rate), the best thing is always to use a counters approach. In many of the DAQ cards and peripherals that NI offers, there are counters that can be driven with the sample clock (one of the fastest clocks on the device) or even a faster time base, and then the 'events' can be used to trigger acquisitions of the counters. Meaning you get exactly what you want: data points that correspond to times when events occur.

Measure time until I get a signal?

Hello,
I'm quite new here, and I feel stupid about asking this question, but I have been trying now for a couple of days to make a VI that measure times until I get a signal in. I'm testing a timers accuracy, so when it turns on the power the VI should show me the time elapsed.
I'm just fighting with different kind of loops, but can't get any sense from it.
/gusse

Hi.
What kind of a signal is available? Since you post in 'counter/timers', let's assume it is some kind of 5V logical signal, which you can set to high als long as your timer runs.
Then, what you need is a simple tick count which is controlled by a gate. Use MAX to set-up a counting task. When choosing the counter, you will be shown which lines to hook up to. Measurment then is
'When Gate is high, count ticks till gate is low.'
Accuracy and time depends on the tick source. On a dedicated counter card such as 6602, 80 Mhz is available, hence 1/80 000 000 s is duration of one tick. Uncertainty in counting results mostly from the gate not knowing, when a tick comes by as it opens and shuts. So this gives a max error of 2 ticks. Other (probably main) source is signal quality, i.e. slew rate of your logical gate signal.
Does that help already? If not, please ask further.
Michael

How can I measure time between transitions at digital input

I am using LabVIEW 6.0 to measure the time duration between 2 transitions in a digital input port. I have a set up including an HP 34970A Data Acquisition unit with the 34907A Multifunction Module plug-in. The LabVIEW program is trying to poll the digital input for level changes and then using the Time function(Tick Count) to check the times at the transitions. However this method doesn't work reliably as I have to measure time periods of 500ms.
Is there any good way of mesuring time period with the above setup. I don't have a module which connects to the internal multimeter in the 34970A. The other stuff I have are a HP 34903A(Actuator Module) and a HP 33120A(Function/Waveform Generator).
Any method for m
ore accurate time measurement with the above setup will be appreciated. If not, what else do I need to make accurate time measurements.

Frankly I doubt that you're going to be able to measure time interval with much accuracy. You're periidically polling a static digital input and how often you poll is going to vary. You could try polling as fast as possible and eliminate as many background tasks as you can. If your tolerance for the measurement is plus or minus 100 msce, then maybe you'll get a decent measurement most of the time. If it's plus or minus 5/10 msec, then it will never happen. The pc's clock is just not that accurate and a software timed loop on Windows is not deterministic enough. Get a counter/timer board for something really accurate or use a scope to capture the waveform.

To high measurement time for NI PXI 4132

Hi,
I'm using 4132 to measure very small current of photo transistor device. with 25v source to the DUT it takes me more than 100ms to get an stable current reading.
How will i reduce measurement time?
tnx!

Hi edakoto,
What current levels are you reading? How are you acquiring the data in software?
One thing to try is to reduce the Aperture time of the device. The PXI 4132 defaults to an aperture time of 16.6 ms. You can reduce this using the Configure Aperture Time VI or function. For more information see here:
http://zone.ni.com/reference/en-XX/help/370736F-01/ni_dc_power_supplies_help/4132_aperture/
Thanks
Patrick W.
Applications Engineer
National Instruments

Measure Time?

How can i measure time my boolean LED stays On.
Attached is the VI
Thanks
Solved!
Go to Solution.
Attachments:
Time measure.vi ‏43 KB

I think that i would do it this way.
Tim
Johnson Controls
Holland Michigan
Attachments:
Time measure.vi ‏39 KB

Thanks for responding to my question. The annwer for your questions are: Measurment time : 300seconds, Sampling Frequency : 2 Hertz, and Window Type : Hanning. Hope you could hint me on this soon.

Thanks for responding to my question. The annwer for your questions are: Measurment time : 300seconds, Sampling Frequency : 2 Hertz, and Window Type : Hanning. Hope you could hint me on this soon.

ok, I see you posted parts of your VI in a different location. There is a sub-VI missing though ( Spline Interpolate.vi). But I re-constructed your data and can see the following things:
1 - Your signal has a significant DC-offset (approximatelly 1000) and this will result in a power value for DC of approximatelly 10E6 (though you wrote 10E8 in your first posting).
2 - If you ignore that DC, you can see on the time signal that there is another signal at very low frequency (order of magnitude amplitude = 10, power spectrum around bin 1 = 100) and you are not capturing an entire period of that signal, so either a measurement time of 300 seconds is not enough or this is a signal caused by a drift that you want to ignore.
But overall there is not much sign
al left once you remove your DC and eventually the very low frequency signal. But given your input signal, the power spectrum looks right. Remember also that the DC component will be replicated (with 6 dB reduction) on bin 1 when you apply a Hanning window. Try eventually without the Hanning window (but you'll still have to ignore your DC bin). Alternatively subtract the dc value from your time signal before computing your power spectrum.

Measure time of webservice

Similar Messages

Maybe you are looking for