Member sheet responce time is to long

As I try to open a membersheet trough clicking "maintain dimension members" the responce time is really to long. and some times we get a dump or there is no responce.
our apshell installation is correct (all dimesions are filled with members). what can be the reason for this performance issue?
best regards

Ok, SP08 already improved speed of that function.
Can you tell what kind of dump you having? Can you also try Fiddler to see which part is slow: BW or network?

Similar Messages

Dimension Member Sheet Timeouts?

Hi - We have a client running BPC 10 MS, Service Pack 11. They are on SQL Server 2008.
They're noticing timeout issues with their dimension member sheets. Anytime an admin goes in to update a dimension member sheet, after five minutes, it times out where even after they close out of the member sheet or even log off and back into BPC, they cannot access the sheet anymore - because the system tells them that another user (they, themselves) is still logged in and has the sheet open. This person is the only one with admin rights so noone else is even touching the membersheets.
Eventually, the issue seems to go away. After an undetermined amount of time, the "lock" on the member sheet goes away. But it's a real nuisance.
Any idea if there's a timeout setting, either in BPC or in SQL server that can be adjusted? They've also been noticing this only for the last 2 - 3 weeks, so they're not sure if maybe a patch or service pack update on the SQL Server side or server side could be causing this.
Any ideas?

Hi Khartik,
this error seems caused by the behaviour of excel with the add-in, when you open a dimension under it run excel on the server and this excel caused the issue, see please this note for the explanation and for a workaround 1751650 - Error message "The process cannot access the file %filename% because it is being used by another process"
Please don't forget to close the threads after solved.
Regards
Roberto

How to get the Admin Task to Process Members from Member Sheet?

Hey guys!
I've been successful getting the Custom SSIS Admin Task to process a Dimension using a SQL staging table. However, we have a few dimensions that are best managed in the Excel Member sheets. When we have changes to these member sheets, is it possible to process the dimension using the SSIS Admin Task. If so, how do I go about doing this? What settings do I need to use within the task?
I've tried using the "Scheduled Members Process" option (I honestly don't even know what this option does and I've found no documentation), but when this option is selected the task simply fails without any messages. And I've tried putting the path directly to the Member Spreadsheet in the "SQL Source Table" box. Using this method, the package returns a successful status code, but it's not really processing anyway. It finishes in less than 2 seconds.
Thanks much!
Sean

I don't understand why you want to do this -- if you're maintaining some dimensions manually in the XLS member sheet, then you should process the changes manually too, using the Admin Console. No DTS is required, and you also get the benefits of validation & error messages right away.
Having said that, if you feel it's necessary, you could set up a DTS package which uses the XLS member sheet, via an Excel connection manager, as a data source which is loaded into your custom dimension staging table. Then this staging table is the source of the admin dimension processing task.
Beware, though, that this means every time you add or modify dimension properties, you will need to update the columns in both the Excel connection manager and the staging table. I've always found this to be a very frustratingly manual process in BI Dev Studio, to get the data fields to properly refresh. I usually end up deleting the source & destination data flow objects, just to get the new fields to show up. (Maybe there's a better way, but I haven't found it.)
I always consider the dimension-processing decision on automation to be all or nothing for each dimension. If you're maintaining the dimension manually in the member sheet, use the admin console to process it.

Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. Also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Good day. as I can do to update my iphone 4 to the latest version of ios 5. whenever you connect to the pc and try to update the waiting time is very long, sometimes up to 12 hours and despite the wait always produce an error message for a long time waiti

good day. as I can do to update my iphone 4 to the latest version of ios 5. whenever you connect to the pc and try to update the waiting time is very long, sometimes up to 12 hours and despite the wait always produce an error message for a long time waiting

Disable ALL security software (firewall, antivirus/spyware, etc.) running on your PC while updating.

HT201250 Time capsule no longer works after upgrading to Mavericks

I have upgraded to mavericks and my time capusle no longer back up. Will Apple be sending out a fix. Forums show lots of apple apologists trying various work arounds and some losing data. When will Apple be sending out a fix.
First Mail was crashing and with the new fix finally Mail is working ... when can we expect the fix for TC and mavericks.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message that corresponds to an abnormal backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showning, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the text field.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

Time Machine no longer working after reinstalling OSX 10.5 w/TM backup

About a week ago Disc Utility told me I had serious problems with my HD structure and a reinstall was necessary. Fortunately, restoring everything using Time Machine was flawless, however Time Machine has not done a single backup since. The Backup.backupdb file is still there on the external drive, along with 6 other folders created at the time I did the reinstall (same names as the 6 inside the subfolder, system, library, users...). If I try to manually do a TM backup it tells me I don't have enough HD space as though it wants to start from scratch, when the folders are all still there from before the reinstall.
Any ideas why Time Machine no longer recognizes the files it created 2 weeks ago?

I had to reinstall Leopard and restore using TM. It also worked flawless for me. When I checked to see if it was backing up again, there was nothing. I also tried to manually back and that didn't work either. I went into System Preferences, Time Machine and had to choose my TM backup drive again. Once I did that it worked perfect.

Time Machine No Longer Finds Mounted Sparseimages after upgrade to 10.6

Wondering if anyone has a solution or workaround for the following. In Leopard I had no problem having Time Machine backup my mounted sparseimage drives and would exclude the physical hard drives these were mounted on. However, since upgrading to Snow Leopard the other day, Time Machine no longer includes the content of the sparseimage drives in the backup (it is not seeing them even when they are mounted). Presents a problem as I only want Time Machine to backup the files within the sparseimage drives that have changed, rather than backing up the whole sparseimage each time. Any suggestions?
Thanks!

Marco1975 wrote:
Hi,
Since I have updated to 10.6.1 (over 10.5.8), my time machine only returns error messages. I am backing up 3 computers on 2 disks via airport extreme and it worked perfectly under 10.5.8. Since I upgraded to 10.6.1, I cant mount the disk or if it does, stops after 5 gig.
With no clue as to what error messages, all we can do is tell you to Start with the Time Machine - Troubleshooting *User Tip* at the top of this forum.
It will show you how to locate the message(s) that describe the problem, then help you fix it.
If that doesn't help, please start a NEW THREAD in the SNOW LEOPARD - TIME MACHINE forum, with details, including all the messages, what you've done, and the results.

HT1998 Time machine no longer backs up. It prepares for back up OK but then fails to complete. The archive is still available. Any ideas? Thanks

Time machine no longer backs up. It prepares for back up OK but then fails to complete. The archive is still available. Any ideas? Thanks

Unfortunately, not much to go on here. There are any of twenty different reasons why backups are not occurring, and no shortcuts that I know of to find out why.
Work your way through Backup Failures in Pondini's excellent support document Time Machine --- Troubleshooting.
See C1 through C19.
http://pondini.org/TM/Troubleshooting.html

Time machine no longer backs up

My Time Capsule no longer showed any previous backups, only the latest one. Previously it deleted the oldest backups to make way for new ones. The single backup that is still visible is many times larger that the data on my hard drive. Here is the details from the Time Machine Buddy Widget:
Starting standard backup
Network destination already mounted at: /Volumes/Fred Schlomka's Time Capsul
QUICKCHECK ONLY; FILESYSTEM CLEAN
Disk image /Volumes/Fred Schlomka's Time Capsul/Charlie-6.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Event store UUIDs don't match for volume: Charlie-7
Node requires deep traversal:/ reason:must scan subdirs|new event db|
Starting pre-backup thinning: 98.88 GB requested (including padding), 49.60 GB available
No expired backups exist - deleting oldest backups to make room
Error: backup disk is full - all 0 possible backups were removed, but space is still needed.
Backup Failed: unable to free 98.88 GB needed space
Backup failed with error: Not enough available disk space on the target volume.
Ejected Time Machine disk image.
Ejected Time Machine network volume.
Can anyone help.
Thanks.
Fred

Is there anything else on your Time Capsule? It appears that other data may be taking up most of the space on the TC.
How much data is Time Machine backing-up (what's shown for Estimated size of full backup under the exclusions box in Time Machine Preferences > Options)?
How large is your Time Capsule?

After lion upgrade time capsule no longer backs up

Time capsule no longer will back up after lion upgrade is anyone else having this problem?

The Time Machine application is part of the Lion operating system, so you will likely get a faster and more informed response if you post in the Lion support area for Time Machine. There are a number of posts there with issues similar to yours.
Mac OS X v10.7 Lion
Click on the Refine This List button under the Lion and then click on Time Machine to get to the support area.

Since I upgraded to Mavericks, Time Machine no longer finds the Time Capsule Disk on my network

Hi,
Since I upgraded to Mavericks, Time Machine no longer finds the Time Capsule Disk on my network.
Five minutes before upgrading it however performed successfully a last backup.
I found several posts on this forum and proposed solutions:
- restarted both the mac and capsule
- deleted the /Library/Preferences/com.apple.TimeMachine.plist (twice rebooting in between)
Still have the issue.

What brand of drive is it?
Disks You Can Use
Troubleshooting backup issues
Time Machine Can’t Find Backup Disk

DataSource has to be replicated (time stamp, see long text)

Hi Experts,
in Production i am getting an error like below
DataSource has to be replicated (time stamp, see long text)
@5C@ Errors in source system @35@
Message no. R3016
Diagnosis
DataSource 8ZCRFAC03 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 19.04.2011 12:56:44.
The time stamp in the BW system is 19.04.2011 12:29:02.
System Response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
i replicated data source and activated transfer rules giving source system and infosource but still it is failing with same message
what went wrong not able to understand
Please help,
Thanks in Advance
Nitya

Seems to be an incorrect transport sequence:
1. First transport you DS from source system R/3 QA to R/3 Prd
2. Once it is successfully transported to R/3 PRD, Replicate DS in BI PRD
4. Now try to collect your infosource, DS, TR in transport request & try to transport it from BI QA to BI PRD.
5. Once it is successfully replicated in Production try Running the loads
It should work.
Regards
Raj

DataSource 8ABCD_K01 has to be replicated (time stamp, see long text)

Hi,
We copied SCM production system to SCM quality system and after that I tried to run forecast process chain.
I got the following error message when process chain tried to extract sales history and failed:
DataSource 8ABCD_K01 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 8ABCD_K01 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 19.12.2008 23:55:19.
The time stamp in the BW system is 01.07.2008 01:51:43.
System Response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Errors in source system
Message no. RSM340
I never did this activity (data source replication)before.I'll appreciate if somebody can help me and provide step by step process to how to do it?
Thanks
Kumar

Thanks for prompt respons Julien.
STEP1:
In SCM quality system, I went in RSA1-- > Infoprovider-> Data source->Right click there --->replicate metadata
got popup message :
Message no. TK730
Diagnosis
In this logon client, any changes to the Repository and to cross-client Customizing objects are prohibited.
System Response
The function terminates
Procedure
If you still want to make the changes, contact the system administrator, who can allocate you a user in a client where you can make the changes.
STEP2:
When I ran the program RS_TRANSTRU_ACTIVATE_ALL ,
entered source system : BW....CLNT...
Infosource : 8ABCD_K01
got following log :
No Transfer Structure Selected
Message no. RSAR051
Do I need to do run data source replication process in SCM developement and then trasport to quality? Is there any pre/post requisite or step i missed.
Thanks

7.5 MS New AppSet is Missing Member Sheet Files

Currently on the 7.5 MS version.
We recently created a new AppSet via copy of the AppShell. I'm able to reach the applications (Planning & Rate), however the dimensions are empty. In the Admin console, attempting to maintain dimension members on any of the dimensions brings back the message "Cannot find dimension member sheet file; use the export dimension feature to restore it from the member table". I've clicked on the dimension and selected Export Dimension. It says it processed successfully. But I still get the "Cannot find dimension member sheet" message, so it didn't solve the problem. Out of curiousity, I tried processing a dimension. That seems to work fine, up until the point where it creates the admin cache file. Error message there says "The network name cannot be found".
In addition to the above, when attempting to find any reports or templates in the applications, we receive the message "The folder does not exist." when clicking on the Company directory.
I'm sensing these problems are all related. Have we missed a step in the copy process? Any suggestions or guidance to get us pointed in the right direction would be greatly appreciated. Thank you!

Hi Kim,
are the dimension files xls still present but empty or they are missing?
Did you receive some erro during the copy? Have you checked the tbllogs to see if there are errors releted with the copy of the appset?
Run first server and client diagnostics to see if there are problems. Check the server tables, like tblServerDefaults, in the appserver to see if this aren't updated.
Modify application with application process and index checked of the APShell, full process of the dims and see if there aren't issues then delete the copied appset and retry the copy with another name.
Regards
Roberto

Member sheet responce time is to long

Similar Messages

Maybe you are looking for