Menu flyouts from Access database?

Greetings,
I'm a midlevel DW programmer, and low level CF programmer,
and very low Flash programmer. I have a client that wants to have
about 5 vertical menu buttons. Each button needs to have a flyout
submenu that could have 20 or so selections, and each of those
could have 20 or so flyouts.
I'd like to know if there is an preexisting menu program or
extension out there that will allow me to put all of the
menu/submenu selections into an Access database, and have the menu
pull data from there?
Many thanks,
Stephen
Tallahassee, FL

yea, lol
A list of there available products.
http://www.interaktonline.com/Products/
regards
Kenny
"Murray *ACE*" <[email protected]> wrote
in message
news:efdu8g$s3b$[email protected]..
> Still available?
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "twocans" <[email protected]> wrote in message
> news:efdu5j$s11$[email protected]..
>>
>>
http://www.interaktonline.com/Products/Dreamweaver-Extensions/MXCSSMenus/Skins/
>>
>>
>> regards
>>
>> kenny
>>
>>
>> "sbsmithfl" <[email protected]>
wrote in message
>> news:efdtlo$rcr$[email protected]..
>>> Greetings,
>>> I'm a midlevel DW programmer, and low level CF
programmer, and very
>>> low
>>> Flash programmer. I have a client that wants to
have about 5 vertical
>>> menu
>>> buttons. Each button needs to have a flyout
submenu that could have 20
>>> or so
>>> selections, and each of those could have 20 or
so flyouts.
>>>
>>> I'd like to know if there is an preexisting menu
program or extension
>>> out
>>> there that will allow me to put all of the
menu/submenu selections into
>>> an
>>> Access database, and have the menu pull data
from there?
>>>
>>> Many thanks,
>>> Stephen
>>> Tallahassee, FL
>>>
>>
>>
>
>

Similar Messages

Upload data from Access Database to Oracle Database In oracle 8i

hi everybody
i am trying upload data from Access database to Oracle Database
i have TT(F1,F2,F3) table in Access Databsse
and emp(ename,ecode,sal) in oracle Database
db_ac is my datasource name
when i connect to Access Database thru this command this show following error
SQL> connect a/a@odbc:db_ac;
ORA-00022: invalid session id; access denied
ORA-00022: invalid session id; access denied
ORA-00022: invalid session id; access denied
Error accessing PRODUCT_USER_PROFILE
Warning: Product user profile information not loaded!
You may need to run PUPBLD.SQL as SYSTEM
Server not available or version too low for this feature
ORA-00022: invalid session id; access denied
Connected.
when i am trying copy data as this command it show error and data not copied.
SQL> COPY FROM A/A@ODBC:DB_AC TO test/test@ora INSERT EMP USING SELECT F1,F2,F3 FROM TT;
Array fetch/bind size is 15. (arraysize is 15)
Will commit when done. (copycommit is 0)
Maximum long size is 80. (long is 80)
ORA-00022: invalid session id; access denied
ERROR:
OCA-00022: general OCA error
can help me .
with thanx

Hi there,<br>
<br>
Please kindly use instead the Database Forum at:-<br>
General Database Discussions<br>
<br>
... to place your question as this is for the Oracle Portal product Export / Import functionality.<br>
<br>
<br>
Kind regards,<br>
Pedro.

Populating menu items from the database...is it possible?

hi
using :forms 10g
we have a requirement in forms where we need to populate the menu items from the database.first we used hiearchial tree where it was possible.but since the requirement changed i am not sure that whether the menu items can be populated by data from the database...will be glad if someone could throw some light on this issue...
thanks

You could always do it but would need to put a fix limit on the number of menu items.
For example you could create a set of menu items at design time with the visible property set to False.
While reading the database, you then set them to True while setting the label to whatever you require.
But it all depends also on what you want your menu items to do when selected.

Data access from Access Database

I want collect some data from access, I have created a frame with swing componet, now when I am searching data with some variable from Access database , it is not comming, but in simple case all data are comming in differnt places in my frame.
The string which I used is
st.executeQuery("Select * from student where cid = '+st1+'"
where st1 is avariable collected some data from the frame, it is tested ok.
now i never did practice with access, please if there is any wrong .

Could you include more code please? The single statement you have provided seems fine, but we're not psychic.

Populating Menu Items From the DataBase

Using 10g
hi
is it possible to populate the menu items from the database using procedure?since our project is multilingual we have such a requirement..could someone throw some light on this?

Hi ,
Here is what you asked for.....
PROCEDURE PRC_SET_MENUITEMS_ENABLED
IS
   USERNAME_VAR PROSOPIKO.DBUSERNAME%TYPE;
      MENU_NAME_VAR MENUS_MODULES.MENU_NAME%TYPE;
      MENU_ID MENUITEM;
BEGIN
      :SYSTEM.MESSAGE_LEVEL:='25';
   USERNAME_VAR:=FNC_GET_USERNAME;
   FOR z in (SELECT /*+LEADING(D C B A) index (A menu_modules_ind) index (D PROSOPIKO_AM_PRIMARY)*/
     DISTINCT MENU_NAME
        FROM MENUS_MODULES A, TASKS_MODULES B , TASKS_ROLE C ,PROSOPIKO D
        WHERE A.CODE_MODULE=B.CODE_MODULE AND B.CODE_TASK=C.CODE_TASK
         AND C.CODE_ROLE=D.CODE_ROLE AND D.DBUSERNAME=USERNAME_VAR
         AND CODE_ORG_MONADA=:GLOBAL.CODE_TMHMA_VAR)
        LOOP
              MENU_ID:=FIND_MENU_ITEM(Z.MENU_NAME);
           SET_MENU_ITEM_PROPERTY(MENU_ID,ENABLED,PROPERTY_TRUE);
           NEXT_RECORD;
        END LOOP;
END;     Regards ,
Simon

Not getting the records from Access database

Hi All,
Iam creating a universe based on Access database. I am able to view the data from all the tables except one table. When i try to view the data there is one error message "Syntax error in from clause, State: 37000". Everything is ok at database side. What does this error means?
Please help me on this.
Thanks.

Hi BOCP,
Thanks for your reply. I have resolved my issue. Actually my issue was, I have a table "Date" in universe which was created in Access database, when i tried to view the Date Table values in Universe i was getting that Syntax error in From clause message. I came to know that Date is a keyword or predefined table in WebI & it wont accept that word as a user defined Table. So i renamed that table in Access and Universe. Now my issue was solved.
Thanks,
Swati.

Transferring a lot of data from Access Database to Labview

I need to transfer 500000 -> 1000000 values in a Access database table to Labview. The values are selected using a query which is very fast if run in Access itself, but from Labview it's very slow. Obviously the connection between Labview and Access is the slow point.
Im using the NI Database connectivity toolset and a UDL file defines the connection. Microsoft Jet 4.0 OLE DB Provider is used.
To be honest i dont know what that really means, just that it normally works but now its stupidly slow for so much data.
Thanks for any help.
Rob

One of my continual gripes with the DBCT is it's poor behavior on large data sets. See NI's response here:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/862567530005f0a186256a33006b917a?OpenDocument
Actually, I wouldn't find it nearly so annoying but for the part that says "In most database books you are told not to return large recordsets...". I prefer the freedom to make a mess of things myself, thanks.
On the plus side, the VI referenced in the article is fairly efficient, you just have to deal with type conversion once things have been moved into LabVIEW.

Search for a record from Access Database, and populate records in Drop Down List, and View It

Hi,
I created a PDF form where I have open, next, previous buttons, and I'm able to connect to the access database, and it's working fine. Now, I want to be able to search by last name from the access database, and retrieve the results in a dropdown field, and then once i select the records in the drop downlist, i want to press a button to display the record. I have multiple records with the same last name. Please help, I searched the internet for hours, and can't find something similar. Your help is appreciated, and sample code is appreciated.

<%
int count = 0;
while (rs1.next()){ %>
<%if (count ==0)
{%>
<option value="<%=inputorthodon%>" selected >
<%=rs1.getString("ortho_name")%></option>
<%}
else{%>
<option value="<%=inputorthodon%>">
<%=rs1.getString("ortho_name")%></option>
<%}
++count;} %>
</select>
U may have to format this a bit. The idea is to use a count variable to put "selected" in only the first OPTION. After that, we don't have to.
Hope this helps.

How to read/write from Access database

Hi everybody
I need a little help for doing what I wrote in the topic!
I use LabVIEW 6i student edition, do Ireally need to install the Database
connectivity toolkit?

Hi Vicio,
There are a couple of different methods to communicate with Access in LabVIEW, and some are more difficult than others. You can use ActiveX Automation to open Microsoft Access and control many aspects of the Access Application. For actual database manipulation however, the Access automation classes rely upon the Microsoft DAO (Data Access Object) and/or ADO (ActiveX Data Object) classes. These classes can be used independently or through the Access automation classes to read and write data into an Access database. These classes can be difficult to use and may require a fair amount of SQL knowledge to accomplish a complicated task. Attached is a very simple example of how you can use DAO from the Access automation classes to read an Access table.
For more information about the Microsoft Access automation classes, DAO or ADO classes refer to the Microsoft website and Developer Network:
MSDN
It is also possible to use Dynamic Data Exchange (DDE) communication between LabVIEW and Access. DDE is a Microsoft technology that preceded COM and ActiveX. DDE is NOT recommended as it is considered by most to be obsolete. However, examples still ship with LabVIEW that demonstrate how to communicate with MS Access using DDE. The examples are located in ..\LabVIEW\examples\comm\access.llb
Note: The LabVIEW Database Connectivity Toolset is the preferred method of database communication with LabVIEW. The LabVIEW Database Connectivity Toolset offers many powerful tools and extended capabilites for quickly accessing databases. The LabVIEW Database Connectivity Toolset offers connectivity to most popular databases through Microsoft ADO technology, complete SQL Functionality, and the ability to save records in XML format. It provides both easy-to-use and advanced functions to allow common database operations as well as detailed database accessibility. The LabVIEW Database Connectivity Toolset is sold separately or in the LabVIEW Enterprise Connectivity Toolset along with the LabVIEW Statistical Process Toolkit and the LabVIEW Internet Developers Toolkit.
Sincerely,
Feroz
National Instruments
Attachments:
Access_ActiveX.vi ‏43 KB

Link dropdown choice to multiple text fields from access database

Is there anyway to link the choice of a dropdown field so it populates other text fields?
Example:
I have created a Data Connection from a MS Access Database for a drop down list which is CompanyName. When I choose the company name I would like it to populate First Name, Last Name, Email, Adress, etc. Does this require a significant amount of code to do...and if so does anyone have a good book suggestion to learn the code for something like this?
Any help in solving this problem is greatly appreciate. I have searched everywhere and found no conclusive answer. Or maybe I am just searching in the wrong place? Thanks for your help.

You will have to make another data connection and create a SQL call to the DB that will incorporate the selection made in the DDList. This will involve code. There is a sample wriiten by Stefan Cameron at this location:
http://forms.stefcameron.com/2006/09/29/selecting-specific-database-records/
Paul

E-mail address from ACCESS database

Hello!
I have created an enrollment form using DW + an Access db.
On this form the user registers his e-mail address and I
would like to know how I can generate a newsletter that will get
this address from the Access database and e-mail to all users
registered there.
It is like a monthly newsletter.
One additional question, if I may.
The users have filled out a "yes" or "no" question for
receiving the Newsletter, so all of them have a "Yes" or "No" field
under the newsletter heading on the database.
Can anyone point me in the right direction?
thanks guys!

How many users do you have on your database?

CREATING A CODE WHICH GETS CONTENT FROM ACCESS DATABASE

HI .I kindly ask you to help me to get a code in visual basic. The system keeps the START_DATE and END_DATE of several items in DataGridView of access databases . like if Start_date is today and end_ date
is tomorrow but one,then If the end_date comes , should show a massage like "CONGZ!! TODAY IS YOUR BIRTHDAY". Thank u very much
[email protected]

Hi Eustus Muhanguzi,
for keeping your own privacy, please remove your email address from your message by clicking the "Edit" link above the message.
I'm not sure if I understood your question correctly. Do you want to get this message at midnight at the transition from End_Date - 1 to End_Date?
I suggest you add a Timer that ticks every second or every couple of seconds. Whenever it ticks, compare DateTime.ToDay to End_Date.Date. You can do this in a loop processing all rows from the DataGridView (DGV). If the End_Date is reached, you have
to remember that for this row the day has already been recognized as the birthday. You can do this in the same row or by keeping another List. After that, call MessageBox.Show to display the message.
Please let us know if the DGV is data bound or unbound.
It is not clear what happens if the program is not always running. If it is started at End_Date, midnight has already been passed.
I do not see which role the Start_date plays in this comparison.
Armin

Trying to display results from access database query on a JSP

Seem to be having real difficulty with this one, i keep getting a null pointer exception :(. Wondered if anyone could point me to any examples of displaying the results on jsp. The database is connected, as i can display the query on netbeans, but just not on a jsp.

I think it would be good if we had a section in these forums for pre-canned answers to the same questions that come up again and again. It would save time.
Here is a rough outline for using JSP:
* Read a JSP book.
* The JSP page (View in MVC) should get all the data it needs to display from a useBean and/or request.getAttribute().
* The JSP page should not have any business logic. Its purpose is to display data only (and have some submit buttons such as 'update').
You can do some basic client side validation using javascript if you want. Because there is no business logic in it, you can easily debug
your code in the servlet or business logic. You can't set breakpoints in JSP and examine data easily.
* When you click the submit button, all data from <input type="text" tags, etc is put into request scope via name/value pairs.
* Submit the JSP page <form tag to a servlet (Control in MVC).
* The servlet reads the name/value pairs of data from the JSP page via request.getParameter()
* The servlet should then instansiate a business object (Model in MVC), passing the data it got from the page to the business logic.
Example: ProcessPage processPage();
if(request.getParameter("updateButtonClicked"))
processPage.updateData(data from the jsp page)
* The business logic should instansiate a separate database object (DAO) to get data to/from the database. Business logic should not have sql in it.
Business logic should not generate html. Business logic should not have request objects in it.
* The business logic should return data to the servlet that in turn will put it in request scope via request.setAttribute() so the JSP page can draw itself.
* The servlet should then call up the approprate JSP page.

Display Autonumber from Access Database when click insert button

I have an application that displays all the customers in my Access database. The primary key is an Autonumber that Access generates.
How can I display the autonumber that Access generates when I click my insert new record button?

The generated autonumber can be retrieved with a SELECT @@IDENTITY which is the same syntax as in SQLServer. When this statement is executed it is effectively asking for the last 'identity' value seen on the current connection which will be the ID of the row you just created with your INSERT statement.

I want to import data from access database to editable Adobe X form - java? txt? fdf? :-(

I've been trying to work out how to fill text fields with imported data from an access 2010 database.
So far I've managed to paste all the data in a large text field on a blank page at the end of the document, but nope, that's not it.
If anyone has the answer....... please I would really like to know
Cheers
Kim

Acrobat used to have its own database connector on Windows (ADBC) but it was removed in version X. You have two options to connect to a live database that publishes itself through the Windows ODBC system:
Create the form using LiveCycle Designer (shipped with Acrobat X Pro, but now a separate product). XFA forms created this way have inbuilt database connection features and will work in Adobe Reader too.
Use the SOAP object in Acrobat JavaScript - but this will not work in Adobe Reader unless you apply permissions using LiveCycle Reader Extensions Server.

Menu flyouts from Access database?

Similar Messages

Maybe you are looking for