Merge partition on old iMac

I bought a 2007 iMac form eBay.
It is running Mac OS 10.6.8
The hard drive is split into Mac1 (50gb) and Mac2 (128gb)
I use Mac2 as my start up disc and have loaded Photoshop etc and store files on this partition.
But I feel like I am wasting 50gb.
I'm not sure why the Mac has been configured like this.
Is there a way to merge the two partitions?
I noticed in Disk Utilities that there is no PARTITION tab, just First Aid, Erase, RAID and Restore.
Many thanks, Brion

No. You'll have clone Mac2 to an ext HD, erase and reformat the int HD into one partition, and restore the clone to it. Ensure that you can boot the machine with the clone before wiping the int HD.

Similar Messages

  • Hi, i have an old imac g4 running 10 .3.9,it has 2 partitions,1st partition has os9 and osx,but would like to put ubuntu on my empty partition,can it be done if so how,thanks for reading,

    hi, i have an old imac g4 running 10 .3.9,it has 2 partitions,1st partition has os9 and osx,but would like to put ubuntu on my empty partition,can it be done if so how,thanks for reading,

    I have my iMac G3 set up with three partitions like you are proposing.
    I'd recommend getting virtual box on your new Mac.  You can install the latest Linux version easier this way.
    The problem is finding a PPC distro you like.  I forget how I configured the Linux boot manager, yaboot.  I may have skipped it or had it installed in the linux partition. 
    Ubuntu
    The Ubuntu folks stopped supporting the power PC a while back.  You will have to install an older version of Ubuntu.
    You may to modify xorg.conf. See:
    http://ubuntuforums.org/showthread.php?t=219532
    Mac G3 modem install Howto
    http://ubuntuforums.org/showthread.php?t=355205
    You may have adjust adjust xorg.conf. See these instructions:
    http://ubuntuforums.org/showthread.php?t=234437
    I was able to get the last official versions of Ubuntu working on my G3 600.
    6.10 Edgy Eft,
    6.06 Dapper Drake
    I used the alternate install and did the alterations noted above.
    These versions are listed at the very bottom of the page.
    https://wiki.ubuntu.com/PowerPCDownloads

  • Need an effective method to swap everything from an old iMac to a new iMac

    Hey Everyone!
    I'm looking to swap iMacs with my parents. I have an older iMac (bought around 2008) and I want to move everything over to my parents newer iMac (bought around 2010), and from there move everything from my parents iMac over to my older iMac.
    I have done tons of work on mine and have over 150 applications. The amount of work it would take to manually install all of these makes this swap not worth it. Is there a way to do this easily with time machine and an external hard drive, or any other way?
    I desperately need the extra speed of the newer iMac for my video editing and my headphone jack has stopped working, which is pretty imperative for editing also. Would it be better to just invest money in more RAM and a repair of the jack? Since my parents have cleared me for this swap and only use their computer for email and Facebook then I think this is the best way to go. Let me know what you think.
    I've included the hardware overview of both computers at the bottom. Humongous thanks to anyone that can show their skills and offer a detailed solution for me!
    New iMac (Parents)
    Model Name: iMac
    Version: 10.6.8
    Model Identifier: iMac11,2
    Processor Name: Intel Core i3
    Processor Speed: 3.06 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache (per core): 256 KB
    L3 Cache: 4 MB
    Memory: 4 GB
    Processor Interconnect Speed: 5.86 GT/s
    Boot ROM Version: IM112.0057.B00
    SMC Version (system): 1.64f5
    Old iMac (Mine)
    Model Name: iMac
    Version 10.8.2
    Model Identifier: iMac8,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.8 GHz
    Number of Processors: 1
    Total Number of Cores: 2
    L2 Cache: 6 MB
    Memory: 2 GB
    Bus Speed: 1.07 GHz
    Boot ROM Version: IM81.00C1.B00
    SMC Version (system): 1.30f1

    Feracuffz61 wrote:
    Thanks for the help! Will this keep both systems exactly the same? Someone else told me to do a Time Machine backup for each machine, then a fresh install of the OS. Are both ways effective? Step by step details would be amazing. Thanks again!
    There is no easy way to merge two accounts together, however you can use Migration Assistant, this will create a new user account on the machine being migrated to. From there you can merge the two accounts, however it will take some work. Again Ponidini adresses this in:
    http://pondini.org/OSX/Transfer.html
    Please carefully read the article, everything you need is right there. It's very comprehensive so take your time.

  • Why can't Disk Utility wipe my old iMac in Target Disk Mode?

    I want to donate my old iMac G3 with all my personal data removed.
    As all my old start up disks are long gone I went online and followed advice to wipe it remotely. I connected the G3 via FireWire to my 15" MacBook Pro (late 2008, running OSX Lion 10.7.5) and restarted the G3 in Target Disk Mode. I opened Disk Utility, selected the drive (not the iMac partition), selected Erase, renamed the drive and chosen the 7 pass option. And waited...
    After leaving it overnight, I awoke to find it was still preparing. I then Skipped that stage (it gave me the option) and left it for 24 hours. It was still skipping, so I had to Force Quit Disk Utility. The G3 is perfectly fine, and Disk Utility works as I just erased a memory stick as a test.
    What's going on?

    You need to do the following:
    Drive Partition and Format
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Only use a single-pass to zero the data. Any more is overkill and will take many hours to complete.

  • New life for old iMac

    My Dad still uses his circa 1998 iMac Rev. D tray loader, since I've kept it alive and up to date by replacing its dead CD-ROM drive from one I bought on eBay, installing more memory (256 MB I think), and OS updates through Panther. He's a cheapskate like me and doesn't want to shell out $1000 for a new iMac. However, lately he's complained this dinosaur was starting to run slow, no surprise since even with a minimal installation of X a few music files and emailed videos left him with less than 400 MB free space on the HD, causing multiple instances of "your startup disk is almost full" messages. Remember this computer shipped with a gargantuan 32 MB memory and a whopping 6 GB hard disk. It ran the latest incarnation of Apple's OS which was OS 8.5. No Firewire on this baby either, so expansion options are limited.
    I reasoned I could remove its diminutive 6 GB HD and install the 30 GB HD I pulled from my iMac DV SE some time ago, giving the old iMac some room to breathe. But how to preserve the contents of the hard disk without having to reinstall his programs, files, etc?
    Here's how I did it:
    Remember there's no Firewire on the Rev. D so there's no way to connect a bootable external hard disk to it. I do have an iPod which has both Firewire and USB cables though. So I connected my 6 GB iPod Mini to the Rev D iMac's USB port, checked "manually manage music" and "enable disk use". Deleted all music files.
    Ran Carbon Copy Cloner and cloned the iMac's disk to the iPod (this took a couple of hours over USB). Set the Rev. D aside.
    Opened the DV SE and removed its 120 GB HD. Information from this web site was most useful. Installed its original 30 GB. Booted it from my Panther disk and partitioned the HD to contain one 7.9 GB partition and the balance in another. Installed Panther on both partitions. Booted the DV SE to ensure the Panther installation went OK. No problems.
    Just for kicks, I set the startup disk to the iPod over Firewire and booted the DV SE from it. Lo and behold it works! there was the old iMac Rev D's old self displayed on my DV SE. Who would think you could use an iPod as a boot disk? Everything worked like it did on Dad's old machine. Weird!
    Selected the startup disk to the larger partition of the 30 GB internal HD and booted it. Ran Carbon Copy Cloner to clone the iPod to the smaller partition. This went a little faster since it's now over Firewire. Selected the startup disk back to the smaller partition of the 30 GB HD.
    Removed the 30 GB HD and reinstalled the 120 GB in the DV SE. Made sure the the DV SE still works then set it aside.
    Opened the iMac Rev. D and removed its pathetically diminutive 6 GB HD. Installed the 30 GB. Closed it up and it attempted to boot. It wouldn't work and got hung on a blue screen. Hmm.
    I booted from a Panther disk. I went to reset the user password, but quickly determined there were no users installed on the boot partition. None. Obviously this would present a problem. Apparently it wasn't a good idea to install Panther on the larger partition using an identical user name and password - I think this confused Panther which deleted the account from the boot partition. If I had to do it over again, I would have set up a temporary account so I could boot from the larger partition and use CCC to restore the smaller partition. Anyway, no immediate solution came to mind, so I did an archive and install, preserving user settings and all that.
    Oddly enough the only "user" was the system administrator. Fortunately, the system administrator had all the same user settings and files that my Dad had so I simply renamed the home folder, set the login name and password accordingly, and that was that.
    For some reason Safari didn't work. Safari would launch, but no window displayed and clicking on the menus did nothing. I could only select "quit" from the Dock. I checked my permissions, trashed the prefs file, everything I could think of, but nothing helped. In desperation I downloaded and installed Safari from Apple's web site (using Firefox which was already installed and fortunately still worked). Amazingly, the same thing happened again. No menus would work. Finally, about to give up, I extracted an older version of Safari from the Panther install disks using Pacifist. That worked! I have no idea what caused this bizarre problem.
    Now, back to the reason I started this to begin with. The boot partition is limited to 8 GB which is better than the 6 GB it used to be, but there is only a little more than 2 GB free now. There is another 20 GB on the remaining partition, but how to use it? As I understand it, you can use Netinfo Manager to map the user's "home" directory to another volume. I haven't tried that yet, but when the boot partition nears capacity, I'll give that a shot. I'm not looking forward to the permissions nightmare that may result.
    So, success for now. The machine runs like new, sure it's a little slow but he's not running Photoshop or anything. That fan makes a racket – how spoiled we've become.
    There was probably an easier way to do all this, but hey, it worked.
    By the way my DV SE runs OS X 10.4.9 flawlessly with a new 120 GB HD and 384 MB memory. I have no plans to retire it any time soon.
    PB Ti 1 GHz  PB 17 1.33 GHz  iMac DV SE  iMac D  iPod mini    Mac OS X (10.4.9)    Legacy (Appletalk) networked printers  22 years Apple!

    Thank you Robert; that's helpful.
    The way to map a user's entire Home folder to another volume is simple: In Netinfo Manager, select the desired user, then change his "home" property to the path where you want the new home folder to be. Theoretically this could be any volume anywhere. You can then completely delete the original home folder.
    I tried this with a test account and it seems to work ok, I just had one problem with a haxie (cleardock). It won't load its system preference. Don't know if it's related to moving the home folder or not. In any event, I'd do lots of testing before making this change permanent.

  • I want to migrate to new Mac. How do I also Restore the partition with old Snow Leopard?

    I will install a second internal HD first, and use Time Machine Restore to it with the Migration Assistant on the new Mac's Mountain Lion.
    Then I will erase the preinstalled Mountain Lion internal HD, and:
    How do I now proceed to Restore to an internal partition on the new Mac, my (still) left Time Machine copy of Snow Leopard,( just a spare system partition, also for Power PC Apps)?
    If I install a new Snow Leopard first from DVD and then tries the Migration Assistant in it, can it us a Mountain Lion Time Machine backup of the Snow Leopard partition? Or can Mountain Lion Migration Assistant be used for Restoring and Migrating Snow Leopard.
    I do not have a Snow Leopard Time Machine backup copy of the partition left. Otherwise I could have taken that on a new installed Snow Leopard.
    Thankful for all ideas, also I understand that HD Restore fully on the whole partition without using Migration Assistant will not work.
    Another question:
    I hope that I can use my new Mac with the old Mac OS X licenses and transfer the new preinstalled Mac OS Mountain Lion license to the old Mac, before giving it away?
    Thanks,
    /groundliner

    Thanks!
    I'm not familiar with the issue of what Mac OS new Macs manages. That puts things in another perspective. I have Lion on a fast 8 GB USB Stick, can I not boot from that either? Of Course, I may be able to put the Mountain Lion Installer on the stick, instead. It could not upgrade the stick to Mountain Lion due to not having enough space for that. But I maybe could fix that. Just wondering - I have several hard disks around, I could try to put the preinstalled Mountain Lion OS version on one of those. Best copying method?
    I did not know that transfer of OS Mountain Lion was not allowed. Leopard license document mentions transfer of hardware and software to another person. So I thought the Mac App Store license was similar - bought for and on just this old iMac, that it also could be transferred to another person. Which would solve the problem for my friend who should have it!
    I keep planning, but I think running old Power PC Apps maybe was no big deal.
    /groundliner

  • New imac doesn't locate old imac hard drive via usb port

    I have an old iMac from ~2006 that recently stopped reading the harddrive.  I pulled the HD out and connected it to my new imac via USB port but I can't locate it.  The HD spins/powers up so I know the connector is strong enough to supply power.  We connected it to my husband's PC and he can see that there is a harddrive but cannot see any files to read.  He even tried Catacombe to try to read files but it didn't work.  My first issue is how can I locate my HD on the new mac?  But the main issue is how can I pull data/pictures off of the old harddrive and import them to my new computer.  I don't hear any clicking sounds from the harddrive so it seems to be working.  I can't reformat it because I don't want to lose the pictures on it.  I don't need the old harddrive to work/write.  I just need to pull the information off of it.  TIA.

    I was not familiar with catacombae , but now I am .
    You have a problem with either a corrupt file system on the hd or a hardware problem with the hd.  I'd say try mounting in disk utility.  Try reparing filesystem on hd.  Try one of the disk repair utilities.  Some have a free trail that let's you know if they can do anything.  You pay to get the data.  Seek profession help.  Pay $$$.
    How to mount with disk utility.
    Repair the file system.  see repair disk button on lower right.
    here are some more data recovery apps.  I left out a few & am posting my complete list.
    Perhaps Disk Warrior will be of some help:
    http://www.alsoft.com/DiskWarrior/
    "Stellar Phoenix Macintosh - Mac data recovery software, recovers data from damaged, deleted, or corrupted volumes and even from initialized disks."
    They have a trial version, so I guess you can see if your data can be recovered...
    http://www.stellarinfo.com/mac-data-recovery.htm
    "Data Rescue II is the best data recovery software on the market for recovering files from a problem hard drive. Data Rescue II works when other tools fail. Data Rescue II is also completely safe to use since it does not attempt any risky repairs to the drive while its scanning."
    http://www.prosofteng.com/products/data_rescue.php
    FileSalvage is an extremely powerful Macintosh application for exploring and recovering deleted files from a drive or volume.  FileSalvage is designed to restore files that have:
    -- been accidentally deleted.
    -- become unreadable due to media faults.
    -- been stored on a drive before it was re-initialized/formatted.
    http://subrosasoft.com/OSXSoftware/index.php?main_page=product_info&products_id= 1
    "TestDisk is a free data recovery utility. It was primarily designed to help recover lost data storage partitions and/or make non-booting disks bootable again when these symptoms are caused by faulty software, certain types of viruses or human error (such as accidentally erasing a partition table)."
    http://en.wikipedia.org/wiki/TestDisk
    Wondershare Data Recovery for Mac
    "Recover lost photos, video, documents, email and archive files from any Mac-based hard drive or external hard drive, iPod, USB drive, SD card, digital camera, mobile phone, and MP3/MP4 player, due to accidental deleting, formatting, virus infection, improper operation, unexpected power failure, and other unknown reasons. Also, iPhone recovery allows you to recover lost photos, videos, SMS, contacts, note, calendar and call history from iTunes backup file. With the free trial, you can preview all your recovered images, videos, music, documents and archive files prior purchasing this Mac Data Recovery."
    http://software.bigbigsoft.com/data-recovery-mac

  • Hi, i have tryed to install os x leopard, (its a old imac) , disk utility is greyed out , my install dvd cant find any hdd to install on , my only way to format and configure is through terminal but dont know what commands to execute

    hi, i have tryed to install os x leopard, (its a old imac) , disk utility is greyed out , my install dvd cant find any hdd to install on , my only way to format and configure is through terminal but dont know what commands to execute...
    i tryed diffrent commands such as diskutil eraseDisk JHFS+ Disk1
    diskutil list , wont show up my harddrive , i now its functionally cause it shows up in disk utility with name and i can get info about it , but everything is greyed out can only switch between "erase , partition , recover , Raid ,....
    when i click the apple in the top left corner the whole menu is greyed out... what to do ?  help me please
    Sincerly AppleNoob92
    p.s i have no experience in apple imac's at all never used before, but im kinda windows nerd so computers i understand but this imac make my insane, cant seem to find any solutions anywhere on the WWW....

    Your HD may be crashed, so you probably should use the oringinal install discs to run Apple Hardware Test in extended mode. If error codes appear this confirms a hardware failure. In addition you cannnot repair the HD using Disk Utility from the startup disk, you have to use the origninal Install discs that shipped with the computer or the most up-to-date version of OS X on a disc that you have.

  • Installing OS and Apps on SSD boot drive on early 2008 Mac Pro while keeping all other data from old iMac on hdd

    So I've just got myself a early 2008 Mac Pro with a OCZ RevoDrive 80GB PCIe SSD to replace my old iMac which is slowly but surely giving up on me. I want to put my OS (mavericks) and some/all (whichever is possible/easier) apps, both apple and 3rd party, from my old iMac, onto the SSD but keep all my other data on the 2TB HDD, also from my old iMac, in the mac pro. Can anyone tell me how to do this/if its possible? (not massively tech savvy so simpleish language and steps would be handy!) Thanks!

    How to use an SSD with your HDD
    If you are going to use an SSD as a boot drive together with your existing HDD as the "data" drive, here's what you can do.
    After installing the SSD you will need to partition and format the SSD using Disk Utility. Then, install OS X on the SSD. After OS X has been installed boot from the SSD. Use Startup Disk preferences to set the SSD as the startup volume.
    Open Users & Groups preferences. Click on the lock icon and authenticate. CTRL- or RIGHT-click on your user account listing in the sidebar and select Advanced Options from the context menu. You will see a field labeled "Home dir:" At the right end you will see a Change button. Click on it. In the file dialog locate the Home folder now located on the HDD (HDD/Users/account_name/.) Select the folder, click on Open button. Restart the computer as directed.
    When the computer boots up it will now be using the Home folder located on the HDD.
    Another more technical method involving the Terminal and aliases is discussed in depth here: Using OS X with an SSD plus HDD setup - Matt Gemmell. This is my preferred approach because I can select which of the Home's folders I want on the HDD and which I don't want. For example, I like to keep the Documents and Library folders on the SSD because I access their content frequently.
    Be sure you retain the fully bootable system on your HDD in case you ever need it.

  • Transfer Outlook Express Address Book & emails from old iMac 333 to iMac G5

    Trying to import my old address book and a collection of emails from Outlook Express 5.0.6 to Mail2.0.2. I've tried everything that Outlook requires and no luck yet. I am reluctant to reload all those names, addresses, etc. into my new iMac G5. Also, I have many emails from my old iMac 333 and need them for my new G5 mail files. Can I read them into Mail 2.0.2 ?
    Thanks for any advice.
    Bob
    iMAC G5 /iBOOK   Mac OS X (10.4.3)   iMAC 333 & iMAC 350

    I was having no success at all when I was trying to import mail data from Outlook Express to Mail on the same office G4 Tower where I just upgraded to Tiger, where all the Apple docu says it is possible...
    Then I realised,
    1. When in X, when importing data from OE, Classic has to be booted, my only and originally OS 9 (installed X on another partition) is to "heavily loaded" with a lot of 3rd party extensions etc, it never loaded completely
    Solution: Install another clean and lean copy of OS 9 somewhere else, then designate this as your Classic, and make sure you only have one copy of OE and one set of your Identities etc in the Document folder
    2. The easier way out is if you have Office X or Office 2004, use Entourage to import everything from OE, then use Mail to import from Entourage.
    Cheers

  • I just purchased a one year old iMac.  How do I create a brand new admin account?

    I just purchased a one year old iMac.  How do I create a brand new admin account?

    The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
    1a. If you don't own another Mac
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received those media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    Some models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you may not be able to reinstall 10.6 even from the original discs, and Internet Recovery may not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
    1b. If you do own another Mac
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    2. Partition and install OS X
    If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
    Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the  Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
    3. Other issues
    If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
    When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

  • My old iMac (screen sits on a white dome) opens with a tiny folder that flashes a question mark, instead of a login to user's desktop

    My old iMac (screen sits on a white dome) opens with a tiny folder that flashes a question mark, instead of a login to user's desktop, when booting up after a forced shutdown. How do I get my operating system working again? Thanks --Jim

    The blinking question mark indicates that the firmware could not find a valid Operating System on your machine.
    Your harddrive may have failed. Your filesystem may have be come corrupted.
    Try these things.
    -- try to boot up from the installation disc.
    The startup manager will list all of your bootable partitions then give you a choice of which to boot.  Hold down the option key then power on. Continue holding down the option key until you see the startup manager. This brings up the startup manager. Click on your hd or disc. Click on right arrow key.
    -- Sometimes if volumes don't appear in Startup Manager (what you get when you hold down the Option key at startup), you need to reset the Mac's PRAM, NVRAM, and Open Firmware. Shut down the Mac, then power it up, and before the screen lights up, quickly hold down the Command, Option, P, and R keys, until the Mac has chimed twice more after the powerup chime.
    Then, before the screen lights up, hold down Command-Option-O-F until the Open Firmware screen appears. Then enter these lines, pressing Return after each one:
    reset-nvram
    set-defaults
    reset-all
    "The reset-all command should restart your Mac. If so, you have successfully reset the Open Firmware settings."
    http://support.apple.com/kb/TS1812?viewlocale=en_US
    Should the fail...
    Try taking the battery out for 10 minutes.  Put battery back in.  Cross fingers. Power the machine back on.
    How to eject a cd from the internal cd drive:
    eject cd
    List of devices:
    devalias
    List of variables:
    printenv
    More than you ever wanted to know about open firmware
    http://www.firmworks.com/QuickRef.html

  • Moving files from old iMac to new iMac

    I am about to buy a new iMac and wish to move all of the data from my old iMac to the new machine. I have backed up data with both Carbon Copy Cloner and with Time Machine. Which of these should I use to move my old data over to the new computer?

    Last week I had to do this very thing. Both Macs ran 10.6.2, the old SL Retail; the new had a new 'SL Build.' (10C2234) (Only bought Retail a short while ago and now it cant be used on the 27" .. Duh!)
    In the past I have had problems using MA because I did not migrate the User from the old Mac I created a new user before doing so.
    In this case I booted the old Mac in Target Mode (on boot hold "T" key down until FW floater seen), connected it to the 27" via FW 800 and booted 27".
    I checked migrate the lot. (There are many upgrades to previous basic SW so I didn't want to go through all these upgrades.)
    1H49m shortened to 45m or so and all done.
    I opened Eudora only to be told Rosetta wasn't installed! No invitation to 'Get IT?' I installed Rosetta from the Retail DVD.
    I rebooted and got kernel panics.
    I booted from SL (Cloned previously to a FW drive Partition on TM) and got KP's again.
    I booted the 27" in Safe Mode (Hold Shift down on boot until spinning gear runs) and set about trashing all 3rd Party stuff in HD>Library>StartupItems Folder.
    Stil got KP's when booting normally.
    I ran DiskWarrior 4.2 on the 27" from the FW Partition after booting this Vol in Safe Mode, and DW got confused requesting to CD boot ... you cannot boot 2009 (Late) Macs from the 4.2 CD/DVD.
    'Phoned Apple and found there was ANOTHER StartupItems Folder ... System>Library>StartupItems.
    This had 3 Folders that were put there by Parallels 5 running on my old Mac. Copied (dragged) to DT, deleted from StartupItems, rebooted and no KP. (Thanks Apple Help!)
    Trashed the copied Folders as they were of no use.
    So far there have been no major problems; Camino quit 4 times, now stable? Snitch needed registering again.
    Runs much cooler than the C2D iMac.
    HTH

  • Issues migrating a 4 yr old iMac to a new iMac

    My wife has a 4 yr old iMac and has a new 27" iMac. I tried to use the migration assistant to move her files to the new machine and each time I reboot, the files never show up in her documents, even though she uses the time machine incremental backups. She still has Lion and I get the message that some apps cannot be transferred due to the new system having Mountain Lion. The migration assistant appears to work correctly.
    I spoke with Apple and the rep told me to start looking for her documents in the backups and transfer them over. They start in August and I do not have that type of time to sort through each backup. Can someone clue me into what I am missing? Thanks.
    By the way, I love the fusion drive. I cannot wait to get an SSD for my iMac at the house.

    I suggest starting over, restoring the OS, and, on first boot, using the Setup Assistant as described in Pondini's Setup New Mac guide. That will eliminate all this extra effort and attempts to merge stuff.

  • Transferring everything from old imac G3 to new mac

    I don't know much about computers, so sorry if this is a stupid question... I have an old imac G3 which I bought new in 1999 or 2000. It is system 9. I don't use it anymore and it's not hooked up to the internet. I do have a lot of important pictures and documents on it. I'm planning on buying a new mac one of these days (don't know exactly which model yet but probably a laptop) and I want to know if all my old documents and files will be able to go straight onto any new mac with the latest OS. My documents are in microsoft word, whatever version of it was around 7 years ago. I have an external disk drive for my imac which plugs in with a USB port. My files are backed up on disks with this disk drive and I guess this would be how I transfer the files to a new computer. Would an external disk drive with old software for system 9 also work on a new system? Basically my question is, does any old software or application for system 9 also work on system 10?

    In addition to the examples that Eustace provided, I recently found that AppleWorks v6 that was bundled with many iMacs will also run under OSX. My daughter had immediate need of a computer and no money to buy a new one. I upgraded our unused old iMac 400DV to Panther and added a larger hard drive. As I had no additional licenses for Office and my daughter needed a WP program, I restored AppleWorks from the iMac restore CD to the OS9 partition I made on the new drive.
    When I launched AppleWorks, it opened in X, not "Classic." It had a few problems but it basically worked That version was 6.0.4 and the update to v6.2.9 available here cleared up all the little problems.
    Upgrading an office computer to one that ran OSX showed me that any MS Office document created with Office 98 (OS9) would open just fine with Office 2004 (OSX). When you save the document it automatically converts it to the later version unless you tell it not to.
    Allan

Maybe you are looking for