Merging of actions for Submit and action button

Hello,
How to merge actions for submit and Commit operations, in a single button?.
For clarity, I have made a form with ADF table, where user can edit table fields. containing Submit and Commit buttons. Once editing is completed, if submit is pressed, changes will be posted and commit button becomes enabled.
Now i want to be both actions should happen in one button. How to do this?.
Thanks in advance
seshu

You can drag an operation onto an existing button (bind to existing button).
The commit operation will automatically submit the form as well.
To make the commit button enabled clear the "disabled" property of the button.

Similar Messages

  • How to get the submit and Reset buttons on bottom of the page?

    while viewing a parametric form in the web browser i get SUBMIT
    and RESET buttons on the top of the form which doesnt look good.
    I tried pasting the whole html available by default in the
    Before Form Value(where the submit and reset buttons are
    defined) in the After Form Value property of the report property
    pallette. Though the layout appears as i wanted but its not
    passing the parameters values to the query but generates an
    error " REP-0788 Warning : The value of restricted LOV parameter
    BV_FROM_DATE is not among the selected values.". What can be the
    solution to this problem? Your Help is much appreciated. And
    also the report generated in the Runtime Previewer shows all the
    colors of the fields but its not shown on the web browser where
    can i define them...Your Help!!!!Thank you very much in
    advance..

    when you select 'list of values for the parameters' there is a choice box that says 'restrict list to Predetermined values'. Don't select it. This will solve your first problem.
    Second:When you run the report on the web you must choose ' desformat=htmlcss' then you can display the report as in the preview window. But still you can't see the same view in the web browser on report builder. It is still not good. As I sad before you can see the right view when publishing on the web.

  • Submit and Reset Buttons in oracle Reports Previewer

    Hi....
    When i generate a report from Form 10g it displays Parameter previewer....
    It shows submit and reset button in the top and then list the other paramet values...
    Now my client wants the submit button and reset button after the list of parameters not in the top.
    As i am new to oracle 10g can anyone help me....
    plz direct me to the forum if it is discussed earlier...
    Thanx in advance....

    Hello,
    The HTML displaying the Submit and Reset buttons is defined in the "Before Form Value property" :
    http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwcontxt/props/pi_rpesc_before_form_value.htm
    You can move the HTML code to the property "After Form Value property"
    http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwcontxt/props/pi_rpesc_after_form_value.htm
    in order to display these buttons at the bottom of the parameter form page ...
    Regards

  • "Save for Web and Devices" button not working anymore

    I can't use the Save for Web and Devices button anymore. Is there a reason for that, I didn't pay 500$ for a software that won't work.

    Hi Mylenium,
    I use Windows 7 Professional 64-bit.
    As for what I did for it not to work anymore, I did nothing at all. This happen in two steps from what I remember, first the button was working but it was not opening the usual window with 4 different file types you can save the image as, it was giving me an error window that said something in the lines of "Could not initialize". Afterwards, the "Save for Web and Devices" link just became greyed out, and was just un-usable. It's not making sence that I did nothing and the software just does not work properly, I'm wondering if any of the other software in the suit that I purchased do the same thing, and is there a way to fix this.

  • Action Script 3 code not working for start and stop button?

    Ok so I have this simple animation I created of a circle that moves from one side of the stage to the other. I have added a new layer and called it buttons. On this layer I have added 2 buttons. One for start and another one for stop. The purpose is to get my circle to move from one side of the stage to the other but be able to use my buttons so that I can start and stop the animations at random times during playback. I fixed all my compiler errors now the problem lies in that everytime I click the start or the stop button I get an output error. I have a 3rd layer in which is titled actions and this is where all my code is posted. I removed that layer and placed my code in the first frame of the buttons layer to see if this would change anything but I still get the same output errors. So I just added back my actions layer. What could I be doing wrong? I have made sure to name all my movie clips and buttons correctly and I even added an instance name to them.
    Here is my code and the errors I am getting when I press the play and stop button on test-
    start_btn.addEventListener(MouseEvent.CLICK, startCircle);
    stop_btn.addEventListener(MouseEvent.CLICK, stopCircle);
    function startCircle(e:MouseEvent):void{
        circle.play();
    function stopCircle(e:MouseEvent):void{
        circle.stop();
    green_btn.addEventListener(MouseEvent.CLICK, greenCircle);
    red_btn.addEventListener(MouseEvent.CLICK, redCircle);
    function greenCircle(e:MouseEvent):void{
        circle.play();
    function redCircle(e:MouseEvent):void{
        circle.stop();
    Here are my output errors-
    TypeError: Error #1009: Cannot access a property or method of a null object reference.
        at exercise2_fla::MainTimeline/redCircle()
    TypeError: Error #1009: Cannot access a property or method of a null object reference.
        at exercise2_fla::MainTimeline/greenCircle()

    ok so my circle is my movie clip and it is titled circle and the instance name is circle. Am I supposed to change MovieClip to circle? I put the code at the top of my actions script but for some reason it did not work. I did change play to stop and it got the movie clip to stop when I do test movie but my buttons still do not work. So I changed stop back to play. Strange.
    I did try changing MovieClip to circle but that did not work so I did Circle with a capital C and that did me no good eigther.
    I meant to add that I did get an error that said- 1180 Call to a possibly undefined method circle.

  • Submit and Reset button not working

    Hi, am new in the forum, php, dreamweaver and flash.
    i have been working on a website for my client using flash, and i had to create a form
    on my contact page that user can use to submit their queries.
    i managed to download a step by step code using php. It guided me through everything
    but my problem is once i uploaded the website on the server the button submit and reset it not doing it job.
    here is the website. www.kulaevent.com
    it takes couple second for the contact form to appear.
    Please help, please

    Thank you
    I have checked the link you gave and i managed to update my form and i uploaded
    on the site and it worked.
    Thanks again

  • Need different processes for Update and Delete buttons

    I'm using a customized version of the Issue Tracker sample application. I've added a table called project_person(project_id,person_id) so that a project can have multiple people assigned to it and so that one person can have multiple projects. I have a form report that lists all of the projects with an edit link which opens one project. On the individual project page, there are page items for each of the columns in the project table and a item for the person assigned to the project--this item is pulled from the separate project_person table. I have two buttons--Delete and Apply Changes. If you click on Apply Changes, the project table should be updated and then the project_person table if the assignment was changed. If you click on Delete, it should delete the project_person record first and then delete the project record. I created a new conditional pl/sql process that updated two tables if 'Apply Changes' button is cliicked. I then created a separate conditional process when the Delete button is clicked. This conditional process checks to see if a record in the project_person table exists, and if so, delete the record. Then delete the project record.
    The update process works fine. The delete process reloads the list of projects with a success message at the top without actually doing a delete and I have no idea why. Does anyone have any suggestions?
    I am not using the automatic row processing, but should I? Or is it ok to have the two separate conditions for the two different buttons?

    Hello again Miah,
    Check the "Sequence Number" for your processes. Typically, APEX will increment by 10, each time you create a Page Process as I recall. You can set this to be any number you want; even if you duplicate the sequence number (ie: you can have multiple Sequence 10 processes).
    Make sure that your Delete process is firing properly and walk through the logic in the source code to be sure that any "IF" or "WHERE" logic is satisfied. For example:
    Begin
      delete from emp_table
        where 1=2;
    End;If this was your page process code - you would receive a SUCCESS message because the PL/SQL code executed successfully, even though nothing will be deleted since 1 will NEVER equal 2.
    So, check Delete Source carefully.
    {size:14}{color:green}Can you post the code from your delete page process here?{color}{size}
    Good luck,
    Don.
    REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone! :)
    Edited by: dfcii© on Oct 27, 2009 10:55 AM

  • T30 - Drivers for ThinkPad and Volume buttons.

    Hi, I've just obtained a T30 2366 FG1 Laptop and need some assistance finding the drivers for the ThinkPad and Volume Buttons.
    The PC has had XP Pro installed, but without and ThinkPad specific drivers - hence why the kays don't function. I also have one Unknown Device in device manager, but have no idea what this device could be.
    The Wifi, NIC and Modem all seem to have been detected so I'm not sure how I can find out what driver is required.
    Any help would be much appreciated.
    Thanks

    Hello smithgt, welcome here!
    Please try download System Update. All necessary prerequisites are mentioned below the Link.
    I would suggest to install hotkey driver, Productivity Center, Levono Help Center,  powermanger driver, powermanager and Access Connections.
    Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
    Please insert your type, model (not S/N) number and used OS in your posts.
    I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
    TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
     English Community       Deutsche Community       Comunidad en Español

  • Updating database table for 'CHANGE' and 'ADD' buttons.

    Hi,
    I am working on module pool program. Here i am using table control.Below is my requirement:
    1) I have designed a selection - screen with 'CHANGE' and 'DISPLAY' buttons and in screen 100 i have 'ADD' and 'SAVE' buttons.
    2) when i click on 'CHANGE' , it will move to screen 200 here i need to change quantity field for that particular record which is in table control.once i change the field value and click on 'SAVE'  a message should be populated that "RECORD IS SAVED' and  this record should be updated in database table with new quantity field value and it should return back to my selection screen.
    3) When i click on 'ADD' , it should display already existing records in disable mode and a new line should be added inorder to enter new records. Once i enter the data and click on SAVE, this new record should be saved in the database table along with existing records.
    Kindly suggest me a sample code for this as am new to table control in module pool programming.

    Hi Gaurav,
    I've a similar problem!! any solutions to your problem!!

  • Next , Back , Save for Later and Cancel Buttons are disabled When Creation?

    Dear all ,
    i am facing problem when creation new offer , the buttons Next , Back , Save for Later and Cancel are being disabled when entering the offer basic details , note that i am working on R12 , please i need the solution ASAP ..
    Best Regards

    Which menu path are you using?
    Are the items available for personalization?

  • Constant annoying update window that is blank except for cancel and finish buttons

    when i open firefox 30.0 there is another smaller window that often opens. the title bar indicates it is some kind of update urging but there is no text to read within the body of the window and the buttons don't work. all i can do is click the X button to close it.
    i decided to try to update FF but when i go to menu/help/about ff and click the update button nothing happens!
    using ff 30 on windows 7 starter on dell inspiron netbook
    help?

    Try this:
    *Download the full Firefox installer and save the file to the desktop<br>https://www.mozilla.org/en-US/firefox/all.html
    *Start the installation with a double-click on the desktop icon

  • What are the color values for imessage and send buttons?

    I am trying to paint my room. Does anyone know the specific colors of the 'imessage bubble' or the 'send' button on the iPhone, iPad, iTouch. The RGB or Hexidecimal values would work. Thanks!

    Use the DigitalColor Meter app located in your utilities folder. This will allow you to hover over areas of your screen and it will display whatever type of values you want it to.
    Translating this into a paint chip number at the hardware store might be a bit of an issue though. There is no method (at least that I'm aware of) to translate computer color codes to paint swatches.

  • My "Check for updates" and "Restore" buttons greyed out in iTunes.

    Hy this is a screenshot of my problem. Please help me out. Thank you.

    On my G4 iBook I was having issues, first with a first gen shuffle, greyed out update and restore, no info on serial number and such. Shuffle was blinking orange and red, took to Genuis bar tried the shuffle reset application, hosed. My 3rd Gen iPod and brand new Video iPod (just got today) also greyed out.
    Shuffle reset was giving numerous error messages, trashed and reinstalled iTunes and all plists, no good.
    Tried shuffle on old eMac running older iTunes, worked fine!!
    Tried brand new Video iPod on old eMac and older iTunes, worked fine.
    Archived and installed Tiger on iBook and voila, Video pod is good to go, haven't tried old shuffle on this yet but, bottom line, reinstall OS did the trick (or so it would appear for now).

  • Submit to SAP button not working

    Hi,
    I am creating an online interactive form which connects to R3 table. When I click on the <b>Submit to SAP</b> button no action takes place. Plz suggest a way by which I can put the data from the pdf back to the system.
    Thanks in advance,
    Prasanna

    Hi,
    look at the following threads . You may post your query in the Interactive Forms Forum for quick replies related to Interactive Forms.
    Submit button is not working.
    .Problem with the Submit and Check button
    Do update, if you find your solution.
    Regards,
    Anto

  • Submit to Sap button in PDF form

    Hi.
    I am create two views
    1. start view       2. Result View
    i am enetering data in the Start view and navigation to Result View.
    in the result view i am displaying all values of start view in the PDF Format.
    i want to navigate from PDF form to Start View  for that i did like this
    First i inserted SUbmit to SAP button in the PDF form
    i created plugs and navigaion betwen Start View and Resutl View (both side)
    i have created action in the Resutview and assigned to PDF form onSubmit parameter.
    when i run the application in the portal it is not working let me know the reasion
    regards
    mmukesh

    Hi Pavan,
    I am getting PDF form properly in browser with no values in the fields as it should be. And i have provided one User entered field, When user enters sales order number in that field and presses the submit to sap button other fields rerlated with sales order status information should be displayed with the values related with that sales order number. But after pressing Submit to SAP button i didnt get values in other fields.
    Method for Submit to SAP button is also called properly. Even i can see the status information in fields outside the PDF form in Browser.
    So, parheps i think that whenever PDF form loads first time in browser, at that time it shows the values in the context variable. But after first load nothing is changed in that PDF form evenif the context values are changed.
    Is it true?
    Regards,
    Bhavik

Maybe you are looking for