Mesh and no mes controllers
Currrently my network is running several wisim for my indoor wireless no mesh solution. with code 4.2.207.0 .
i need a mesh solution for the outside parking lot that will work with
the 1522
now according to the document the options i have is 4.1.192.35M
or Release 5.2.193.0
now i am runnning wcs 4.2.110.0
i would like to keep the same version in the indor ap and perhaps use version
4.1.192.35M for mesh outdoor, according the the readme document its supported to run both version.
has anyone in this forum have both mesh and no mesh controllers?
are they in the same mobility group?
i want to avoid upgrading WCS, as well as the controllers service indor AP.
Mesh is supported up to 4.2.176.51M.
4.2.176.51 was release in Jul 1st 2009. You need a WCS version released AFTER Jul 1st 2009 and to be at least 4.2 code.
You need to wait for the next maintenance release of 4.2 or 5.2 or 6.0 code. Soon there should be a maintenance release for 6.0 and that will work with 4.2.176.51M.
You should be able to have mesh and non mesh controllers in the same mobility group, and you can keep 4.1.192.35M if you want.
5.2.193.0 is not a MESH code that I am aware of, as there is no mesh code after 4.2 of my knowledge.
If you want to use 4.1.192.35M Mesh and 4.2.207.0, then you need WC 4.2.128.0. The upgrade from 4.2.110.0 should take you about 10 minutes and will not loose any data, you will need to upgrade your WCS for this scenario to wok as 4.1.192.35M was released AFTER 4.2.110.0 but BEFORE 4.2.128.0
HTH
Similar Messages
-
Edge detection between the finiteelement mesh and a bounding box
i have an finite element mesh ,i constucuted a bounding box which passes through the mesh ,so now i want to detect the edge of the rectangle which intersects the mesh and construct a new mesh which resides in the rectangular box.how to do this.any kind of help is appreciated.
P /------------------\ Q
A |---- |/---|-----|----|-----|--\--| B
|----/|----|-----|----|-----|---\-|
|---/-|----|-----|----|-----|----\|
|--/--|----|-----|----|-----|---- |\
D |-/---|----|-----|----|-----|---- | \ C
S /-------------------------------------\ R
suppose ABCD is FEMesh, PQRS is a bounding box,consider the edge PS when it intersect with the elements in the mesh i will get the pentagon element when i want to form the new mesh which contains the elements which are inside the box.the graphical represenation is not clear if you draw on a paper you can easily understand my problem.
now how to create a new mesh from the elements which reside inside the boxin which the left hand side of PS will be discarded and RHS of QR edge is discarded,so now mesh will have some zigzag shape i think.so please help me out how to solve this problem.i think the figure is not clear , so i want to
simplify the problem by considering only one element
of the mesh and only one edge of the box.Okay.
suppose ABCD
is a 3D quadrilateral element and PQ is the edge
passing through the element.i will pass a function
with coordinates of ABCD and P (startpoint of
edge)coordinate and its normal vector,if there is an
intersection the function should return 2 elements
according to intersection
now we have element ABCD and an edge with P and its
normal vector,now we have intersection between element
and edge from p at X and Y, now the algorithm should
return AXYD as one element and XBCY as second
element.please help me out in solving this task.
Thanks in advance.I'll assume you mean 2D, planar, linear quad. I think the general 3D problem would entail surfaces and be much more difficult. If you use higher order shape functions the 2D problem isn't trivial, because then you might have more than two intersections.
It COULD return two points of intersection, but you'll have to be careful about special cases:
(1) The edge could intersect just one of the four corners,
(2) The edge could coincide with an edge of the element,
(3) The edge could miss the element entirely and not intersect.
You'll have to decide what to do in the degenerate cases. The sensible thing would be to do nothing and leave the element alone.
You'll also be concerned about mesh quality when you're done. Near degenerate elements won't perform well when you analyze them. Will you try to correct these after the fact?
What if you end up with triangular elements? An edge might slice off a triangle and leave you with a five-noded element. What will you do with those? Create two triangles to get back to a quad? It's not so easy. You really should look into quadtree meshing. There are more general ways to attack a problem like this.
What kind of physics are you ultimately trying to capture? What are you really doing here?
You've described the algorithm fairly well, even if you haven't thought it all the way through.
What's the problem? You'll have to write the code. No one will do that for you. Write some and come back with specific questions if you have difficulties. This is a Java forum, after all. -
Large amount of traffic with 152x mesh and mac-flap
We have just had a Mesh designed by an external company, and when we plugged it in we began have large numbers of mac-flap notification and more than 700mb of traffic sent across our data network.
Our setup includes 2 5508 controllers and 9 152x APs
3 APs (RAP) with their 5.8 antennas are within close proximity on a vertical pole pointing to the other 6 about 1000mtrs away in an arc. With their ethernet ports plugged into the same switch (native vlan 111) as WLC1 (which is LAG'd to two ports)
Vlan 111 for management of Mesh
Vlan 201 for WLAN
DHCP scope on DC on Vlan 100 (helper address from router)
Q, will the closeness of the 5.8 antennas cause any problems with mac-flap or is likely to be the controllers with their LAG connections or something totally different?
Thanks for any helpAndrew,
the proximity of the antennas shouldn't cause the mac-flap notification, nor should the LAG connection cause this. That's more and indication that the client is flopping between ports on the switch, which generally happens when you are not configured for LAG on the WLC, nor a port-channel on the switch.
the mac address that is being reported in the mac-flap. Is it a client or is it the MAPs?
If it's one of hte MAPs, you may want to check the antennas of the RAPs, since the MAPs sholdl stabliaze once AWPP has run and optimized the path to the network. If they are flapping I would look at possible RF or antenna issues.
HTH,
Steve
Please remember to rate helpful posts or to mark the question as answered so that it can be found later. -
XBMC freezes with free Radeon driver and VDPAU (Mesa 3D 9.2)
Hello!
I am currently setting up a HTPC with AMD A4-5300 with the integrated Radeon HD 7480D. To avoid the trouble with the fglrx driver, I would like to use the free xf86-video-ati driver.
I thought this would be no problem since the update to Mesa 3D 9.2 (Package version 9.2.0-1) yesterday. This should have brought support for the UVD in the GPU when at least kernel 3.10 is installed (3.10.9-1 is).
According to this Gentoo Wiki page, the Aruba GPU should use TAHITI_uvd.bin as the UVD firmware, the file exists in /usr/lib/firmware/radeon.
But now to the problems with XBMC (12.2-5). When I boot up the system, select a for example x264 encoded video file it plays fine most of the time. Low CPU load indicates that hardware decoding actually is used. When I then stop the video and simply select it again in the file list, XBMC freezes. Restarting works most of the time to workaround the problem, so after a reboot XBMC manages to play the video most of the time.
Sometimes it even freezes on the first attempt to start the movie. After just restarting X11, XBMC was never able to play a video file.
Here is a portion of the logfile where a film is played, then stopped and then selected again, causing a freeze:
19:14:30 T:139964276774656 NOTICE: Thread Background Loader start, auto delete: false
19:14:34 T:139965115230144 NOTICE: Previous line repeats 1 times.
19:14:34 T:139965115230144 NOTICE: DVDPlayer: Opening: smb://ANDI/xxx.mkv
19:14:34 T:139965115230144 WARNING: CDVDMessageQueue(player)::Put MSGQ_NOT_INITIALIZED
19:14:34 T:139964276774656 NOTICE: Thread CDVDPlayer start, auto delete: false
19:14:34 T:139964276774656 NOTICE: Creating InputStream
19:14:34 T:139964276774656 NOTICE: Creating Demuxer
19:14:35 T:139964276774656 NOTICE: Opening video stream: 0 source: 256
19:14:35 T:139964276774656 NOTICE: Creating video codec with codec id: 28
19:14:35 T:139964276774656 NOTICE: CDVDVideoCodecFFmpeg::Open() Creating VDPAU(1920x1080, 28)
19:14:35 T:139964276774656 NOTICE: vdp_device = 0x00000001 vdp_st = 0x00000000
19:14:35 T:139964276774656 NOTICE: VDPAU Decoder capabilities:
19:14:35 T:139964276774656 NOTICE: name level macbs width height
19:14:35 T:139964276774656 NOTICE: ------------------------------------
19:14:35 T:139964276774656 NOTICE: MPEG1 16 9216 2048 1152
19:14:35 T:139964276774656 NOTICE: MPEG2_SIMPLE 16 9216 2048 1152
19:14:35 T:139964276774656 NOTICE: MPEG2_MAIN 16 9216 2048 1152
19:14:35 T:139964276774656 NOTICE: H264_BASELINE 16 9216 2048 1152
19:14:35 T:139964276774656 NOTICE: H264_MAIN 16 9216 2048 1152
19:14:35 T:139964276774656 NOTICE: H264_HIGH 16 9216 2048 1152
19:14:35 T:139964276774656 NOTICE: VC1_SIMPLE 16 9216 2048 1152
19:14:35 T:139964276774656 NOTICE: VC1_MAIN 16 9216 2048 1152
19:14:35 T:139964276774656 NOTICE: VC1_ADVANCED 16 9216 2048 1152
19:14:35 T:139964276774656 NOTICE: MPEG4_PART2_ASP 16 9216 2048 1152
19:14:35 T:139964276774656 NOTICE: ------------------------------------
19:14:35 T:139964276774656 NOTICE: Mixer feature: VDP_VIDEO_MIXER_FEATURE_NOISE_REDUCTION
19:14:35 T:139964276774656 NOTICE: Mixer feature: VDP_VIDEO_MIXER_FEATURE_SHARPNESS
19:14:35 T:139964276774656 NOTICE: CDVDVideoCodecFFmpeg::Open() Using codec: H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10 (VDPAU acceleration)
19:14:35 T:139964285167360 NOTICE: Thread CVideoReferenceClock start, auto delete: false
19:14:36 T:139964276774656 NOTICE: Creating video thread
19:14:36 T:139963235432192 NOTICE: Thread CDVDPlayerVideo start, auto delete: false
19:14:36 T:139964276774656 NOTICE: Opening audio stream: 1 source: 256
19:14:36 T:139964276774656 NOTICE: Finding audio codec for: 86020
19:14:36 T:139964276774656 NOTICE: Creating audio thread
19:14:36 T:139963235432192 NOTICE: running thread: video_thread
19:14:36 T:139963227039488 NOTICE: Thread CDVDPlayerAudio start, auto delete: false
19:14:36 T:139963227039488 NOTICE: running thread: CDVDPlayerAudio::Process()
19:14:36 T:139963227039488 NOTICE: Creating audio stream (codec id: 86020, channels: 6, sample rate: 48000, no pass-through)
19:14:36 T:139963235432192 NOTICE: (VDPAU) screenWidth:0 vidWidth:1920 surfaceWidth:1920
19:14:36 T:139963235432192 NOTICE: (VDPAU) screenHeight:0 vidHeight:1080 surfaceHeight:1088
19:14:36 T:139963235432192 NOTICE: Creating 1920x1080 pixmap
19:14:36 T:139963235432192 NOTICE: (VDPAU) Total Output Surfaces Available: 2 of a max (tmp: 2 const: 4)
19:14:36 T:139963235432192 NOTICE: (VDPAU) Creating the video mixer
19:14:36 T:139963235432192 NOTICE: fps: 23.976024, pwidth: 1920, pheight: 1080, dwidth: 1920, dheight: 1080
19:14:36 T:139963235432192 NOTICE: Display resolution ADJUST : HDMI-0: 1920x1080 @ 24.00Hz (21) (weight: 0.001)
19:14:36 T:139965115230144 NOTICE: CVDPAU::OnLostDevice event
19:14:36 T:139965115230144 NOTICE: (VDPAU) FiniVDPAUOutput
19:14:36 T:139965115230144 ERROR: GLX: Same window as before, refreshing context
19:14:36 T:139965115230144 NOTICE: Using GL_TEXTURE_2D
19:14:36 T:139965115230144 NOTICE: GL: Using VDPAU render method
19:14:36 T:139965115230144 NOTICE: GL: NPOT texture support detected
19:14:36 T:139965115230144 NOTICE: GL: Using GL_ARB_pixel_buffer_object
19:14:36 T:139965115230144 NOTICE: CVDPAU::OnResetDevice event
19:14:36 T:139963235432192 NOTICE: Attempting recovery
19:14:36 T:139963235432192 NOTICE: vdp_device = 0x00000001 vdp_st = 0x00000000
19:14:36 T:139963235432192 NOTICE: (VDPAU) screenWidth:1920 vidWidth:1920 surfaceWidth:1920
19:14:36 T:139963235432192 NOTICE: (VDPAU) screenHeight:1080 vidHeight:1080 surfaceHeight:1088
19:14:36 T:139963235432192 NOTICE: Creating 1920x1080 pixmap
19:14:36 T:139963235432192 NOTICE: (VDPAU) Total Output Surfaces Available: 2 of a max (tmp: 2 const: 4)
19:14:36 T:139963235432192 NOTICE: (VDPAU) Creating the video mixer
19:14:37 T:139965115230144 ERROR: CWinSystemX11::XErrorHandler: BadDrawable (invalid Pixmap or Window parameter), type:0, serial:12680, error_code:9, request_code:152 minor_code:8
19:14:57 T:139965115230144 NOTICE: CDVDPlayer::CloseFile()
19:14:57 T:139965115230144 NOTICE: DVDPlayer: waiting for threads to exit
19:14:57 T:139964276774656 NOTICE: CDVDPlayer::OnExit()
19:14:57 T:139964276774656 NOTICE: DVDPlayer: closing audio stream
19:14:57 T:139964276774656 NOTICE: Closing audio stream
19:14:57 T:139964276774656 NOTICE: Waiting for audio thread to exit
19:14:57 T:139963227039488 NOTICE: thread end: CDVDPlayerAudio::OnExit()
19:14:57 T:139964276774656 NOTICE: Closing audio device
19:14:57 T:139964276774656 NOTICE: Deleting audio codec
19:14:57 T:139964276774656 NOTICE: DVDPlayer: closing video stream
19:14:57 T:139964276774656 NOTICE: Closing video stream
19:14:57 T:139964276774656 NOTICE: waiting for video thread to exit
19:14:57 T:139963235432192 NOTICE: thread end: video_thread
19:14:57 T:139964276774656 NOTICE: deleting video codec
19:14:57 T:139964276774656 NOTICE: CDVDPlayer::OnExit() deleting demuxer
19:14:57 T:139964276774656 NOTICE: CDVDPlayer::OnExit() deleting input stream
19:14:57 T:139965115230144 NOTICE: DVDPlayer: finished waiting
19:14:57 T:139965115230144 NOTICE: (VDPAU) Close
19:14:57 T:139965115230144 NOTICE: (VDPAU) FiniVDPAUOutput
19:14:57 T:139965115230144 ERROR: GLX: Same window as before, refreshing context
19:14:58 T:139963387606784 NOTICE: Thread Background Loader start, auto delete: false
19:14:58 T:139965115230144 NOTICE: Previous line repeats 1 times.
19:14:58 T:139965115230144 NOTICE: CDVDPlayer::CloseFile()
19:14:58 T:139965115230144 WARNING: CDVDMessageQueue(player)::Put MSGQ_NOT_INITIALIZED
19:14:58 T:139965115230144 NOTICE: DVDPlayer: waiting for threads to exit
19:14:58 T:139965115230144 NOTICE: DVDPlayer: finished waiting
19:15:09 T:139965115230144 NOTICE: DVDPlayer: Opening: smb://ANDI/xxx.mkv
19:15:09 T:139965115230144 WARNING: CDVDMessageQueue(player)::Put MSGQ_NOT_INITIALIZED
19:15:09 T:139964285167360 NOTICE: Thread CDVDPlayer start, auto delete: false
19:15:09 T:139964285167360 NOTICE: Creating InputStream
19:15:10 T:139964285167360 NOTICE: Creating Demuxer
19:15:10 T:139964285167360 NOTICE: Opening video stream: 0 source: 256
19:15:10 T:139964285167360 NOTICE: Creating video codec with codec id: 28
19:15:10 T:139964285167360 NOTICE: CDVDVideoCodecFFmpeg::Open() Creating VDPAU(1920x1080, 28)
Here a debug log from a similar action (play, stop, play, crash)
19:21:23 T:139993780455360 NOTICE: DVDPlayer: Opening: smb://xxx.mkv
19:21:23 T:139993780455360 WARNING: CDVDMessageQueue(player)::Put MSGQ_NOT_INITIALIZED
19:21:23 T:139993780455360 DEBUG: CRenderManager::UpdateDisplayLatency - Latency set to 0 msec
19:21:23 T:139993780455360 DEBUG: LinuxRendererGL: Cleaning up GL resources
19:21:23 T:139993780455360 DEBUG: CLinuxRendererGL::PreInit - precision of luminance 16 is 16
19:21:23 T:139993780455360 DEBUG: SECTION:LoadDLL(special://xbmcbin/system/players/dvdplayer/avutil-51-x86_64-linux.so)
19:21:23 T:139993780455360 DEBUG: Loading: /usr/lib/xbmc/system/players/dvdplayer/avutil-51-x86_64-linux.so
19:21:23 T:139993780455360 DEBUG: SECTION:LoadDLL(special://xbmcbin/system/players/dvdplayer/swscale-2-x86_64-linux.so)
19:21:23 T:139993780455360 DEBUG: Loading: /usr/lib/xbmc/system/players/dvdplayer/swscale-2-x86_64-linux.so
19:21:23 T:139992949044992 NOTICE: Thread CDVDPlayer start, auto delete: false
19:21:23 T:139992949044992 NOTICE: Creating InputStream
19:21:23 T:139992949044992 DEBUG: CSmbFile::Open - opened xxx.mkv, fd=10001
19:21:23 T:139992949044992 DEBUG: ScanForExternalSubtitles: Searching for subtitles...
19:21:23 T:139992949044992 DEBUG: OpenDir - Using authentication url smb://ANDI/Filme
19:21:23 T:139993780455360 DEBUG: ------ Window Init (DialogBusy.xml) ------
19:21:24 T:139992949044992 DEBUG: ScanForExternalSubtitles: END (total time: 639 ms)
19:21:24 T:139992949044992 NOTICE: Creating Demuxer
19:21:24 T:139992949044992 DEBUG: SECTION:LoadDLL(special://xbmcbin/system/players/dvdplayer/avcodec-53-x86_64-linux.so)
19:21:24 T:139992949044992 DEBUG: Loading: /usr/lib/xbmc/system/players/dvdplayer/avcodec-53-x86_64-linux.so
19:21:24 T:139992949044992 DEBUG: SECTION:LoadDLL(special://xbmcbin/system/players/dvdplayer/avformat-53-x86_64-linux.so)
19:21:24 T:139992949044992 DEBUG: Loading: /usr/lib/xbmc/system/players/dvdplayer/avformat-53-x86_64-linux.so
19:21:24 T:139992949044992 DEBUG: Open - probing detected format [matroska,webm]
19:21:24 T:139992949044992 DEBUG: Open - avformat_find_stream_info starting
19:21:24 T:139992949044992 DEBUG: Open - av_find_stream_info finished
19:21:24 T:139992949044992 INFO: ffmpeg[A5FFB700]: Input #0, matroska,webm, from 'smb://ANDI/xxx.mkv':
19:21:24 T:139992949044992 INFO: ffmpeg[A5FFB700]: Duration: 01:27:57.02, start: 0.000000, bitrate: 13143 kb/s
19:21:24 T:139992949044992 INFO: ffmpeg[A5FFB700]: Stream #0:0(ger): Video: h264 (High), yuv420p, 1920x1080 [SAR 1:1 DAR 16:9], 23.98 fps, 23.98 tbr, 1k tbn, 47.95 tbc (default)
19:21:24 T:139992949044992 INFO: ffmpeg[A5FFB700]: Stream #0:1(ger): Audio: dts (DTS), 48000 Hz, 5.1(side), s16, 1536 kb/s (default)
19:21:24 T:139992949044992 INFO: ffmpeg[A5FFB700]: Metadata:
19:21:24 T:139992949044992 INFO: ffmpeg[A5FFB700]: title : German
19:21:24 T:139992949044992 INFO: ffmpeg[A5FFB700]: Stream #0:2(eng): Audio: dts (DTS), 48000 Hz, 5.1(side), s16, 1536 kb/s
19:21:24 T:139992949044992 INFO: ffmpeg[A5FFB700]: Metadata:
19:21:24 T:139992949044992 INFO: ffmpeg[A5FFB700]: title : English
19:21:24 T:139992949044992 NOTICE: Opening video stream: 0 source: 256
19:21:24 T:139992949044992 NOTICE: Creating video codec with codec id: 28
19:21:24 T:139992949044992 DEBUG: CDVDFactoryCodec: compiled in hardware support: CrystalHD:no OpenMax:no VDPAU:yes VAAPI:yes
19:21:24 T:139992949044992 DEBUG: FactoryCodec - Video: - Opening
19:21:24 T:139992949044992 DEBUG: SECTION:LoadDLL(special://xbmcbin/system/players/dvdplayer/swresample-0-x86_64-linux.so)
19:21:24 T:139992949044992 DEBUG: Loading: /usr/lib/xbmc/system/players/dvdplayer/swresample-0-x86_64-linux.so
19:21:24 T:139992949044992 DEBUG: SECTION:LoadDLL(special://xbmcbin/system/players/dvdplayer/avfilter-2-x86_64-linux.so)
19:21:24 T:139992949044992 DEBUG: Loading: /usr/lib/xbmc/system/players/dvdplayer/avfilter-2-x86_64-linux.so
19:21:24 T:139992949044992 NOTICE: CDVDVideoCodecFFmpeg::Open() Creating VDPAU(1920x1080, 28)
19:21:24 T:139992949044992 NOTICE: vdp_device = 0x00000001 vdp_st = 0x00000000
19:21:24 T:139992949044992 NOTICE: VDPAU Decoder capabilities:
19:21:24 T:139992949044992 NOTICE: name level macbs width height
19:21:24 T:139992949044992 NOTICE: ------------------------------------
19:21:24 T:139992949044992 NOTICE: MPEG1 16 9216 2048 1152
19:21:24 T:139992949044992 NOTICE: MPEG2_SIMPLE 16 9216 2048 1152
19:21:24 T:139992949044992 NOTICE: MPEG2_MAIN 16 9216 2048 1152
19:21:24 T:139992949044992 NOTICE: H264_BASELINE 16 9216 2048 1152
19:21:24 T:139992949044992 NOTICE: H264_MAIN 16 9216 2048 1152
19:21:24 T:139992949044992 NOTICE: H264_HIGH 16 9216 2048 1152
19:21:24 T:139992949044992 NOTICE: VC1_SIMPLE 16 9216 2048 1152
19:21:24 T:139992949044992 NOTICE: VC1_MAIN 16 9216 2048 1152
19:21:24 T:139992949044992 NOTICE: VC1_ADVANCED 16 9216 2048 1152
19:21:24 T:139992949044992 NOTICE: MPEG4_PART2_ASP 16 9216 2048 1152
19:21:24 T:139992949044992 NOTICE: ------------------------------------
19:21:24 T:139992949044992 NOTICE: Mixer feature: VDP_VIDEO_MIXER_FEATURE_NOISE_REDUCTION
19:21:24 T:139992949044992 NOTICE: Mixer feature: VDP_VIDEO_MIXER_FEATURE_SHARPNESS
19:21:24 T:139992949044992 NOTICE: CDVDVideoCodecFFmpeg::Open() Using codec: H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10 (VDPAU acceleration)
19:21:24 T:139992949044992 DEBUG: FactoryCodec - Video: ff-h264_vdpau-vdpau - Opened
19:21:24 T:139992957437696 NOTICE: Thread CVideoReferenceClock start, auto delete: false
19:21:24 T:139992957437696 DEBUG: CVideoReferenceClock: Setting up GLX
19:21:24 T:139992957437696 DEBUG: CVideoReferenceClock: GL_VENDOR:x.org, not using nvidia-settings
19:21:24 T:139992957437696 DEBUG: CVideoReferenceClock: Using RandR for refreshrate detection
19:21:24 T:139992957437696 DEBUG: CVideoReferenceClock: Detected refreshrate: 50 hertz
19:21:24 T:139992949044992 NOTICE: Creating video thread
19:21:24 T:139991896848128 NOTICE: Thread CDVDPlayerVideo start, auto delete: false
19:21:24 T:139991896848128 NOTICE: running thread: video_thread
19:21:24 T:139992949044992 NOTICE: Opening audio stream: 1 source: 256
19:21:24 T:139992949044992 NOTICE: Finding audio codec for: 86020
19:21:24 T:139991896848128 DEBUG: CDVDPlayerVideo - CDVDMsg::GENERAL_SYNCHRONIZE
19:21:24 T:139992949044992 DEBUG: FactoryCodec - Audio: FFmpeg - Opening
19:21:24 T:139992949044992 DEBUG: FactoryCodec - Audio: FFmpeg - Opened
19:21:24 T:139992949044992 NOTICE: Creating audio thread
19:21:24 T:139991888455424 NOTICE: Thread CDVDPlayerAudio start, auto delete: false
19:21:24 T:139991888455424 NOTICE: running thread: CDVDPlayerAudio::Process()
19:21:24 T:139992949044992 DEBUG: ReadEditDecisionLists - Checking for edit decision lists (EDL) on local drive or remote share for: smb://ANDI/xxx.mkv
19:21:24 T:139992949044992 DEBUG: CDVDPlayer::SetCaching - caching state 3
19:21:24 T:139991896848128 INFO: CDVDPlayerVideo - Stillframe left, switching to normal playback
19:21:25 T:139991888455424 NOTICE: Creating audio stream (codec id: 86020, channels: 6, sample rate: 48000, no pass-through)
19:21:25 T:139991888455424 INFO: CSoftAE::MakeStream - AE_FMT_S16NE, 48000, FL,FR,FC,LFE,SL,SR
19:21:25 T:139991896848128 NOTICE: (VDPAU) screenWidth:0 vidWidth:1920 surfaceWidth:1920
19:21:25 T:139991896848128 NOTICE: (VDPAU) screenHeight:0 vidHeight:1080 surfaceHeight:1088
19:21:25 T:139993780455360 DEBUG: CGUIInfoManager::SetCurrentMovie(smb://ANDI/xxx.mkv)
19:21:25 T:139993780455360 DEBUG: GetMovieId (smb://ANDI/xxx.mkv), query = select idMovie from movie where idFile=17
19:21:25 T:139993780455360 DEBUG: CAnnouncementManager - Announcement: OnPlay from xbmc
19:21:25 T:139993780455360 DEBUG: GOT ANNOUNCEMENT, type: 1, from xbmc, message OnPlay
19:21:25 T:139993780455360 DEBUG: Building didl for object 'smb://ANDI/xxx.mkv'
19:21:25 T:139991896848128 DEBUG: CDVDPlayerVideo - CDVDMsg::GENERAL_RESYNC(167000.000000, 0)
19:21:25 T:139991896848128 NOTICE: Creating 1920x1080 pixmap
19:21:25 T:139993337231104 DEBUG: CSoftAE::Run - Sink restart flagged
19:21:25 T:139993337231104 INFO: CSoftAE::LoadSettings - Stereo upmix is enabled
19:21:25 T:139993337231104 INFO: CSoftAE::InternalOpenSink - sink incompatible, re-starting
19:21:25 T:139991896848128 DEBUG: Found 60 fbconfigs.
19:21:25 T:139991896848128 DEBUG: Using fbconfig index 0.
19:21:25 T:139991896848128 NOTICE: (VDPAU) Total Output Surfaces Available: 2 of a max (tmp: 2 const: 4)
19:21:25 T:139991896848128 NOTICE: (VDPAU) Creating the video mixer
19:21:25 T:139991896848128 NOTICE: fps: 23.976024, pwidth: 1920, pheight: 1080, dwidth: 1920, dheight: 1080
19:21:25 T:139991896848128 DEBUG: OutputPicture - change configuration. 1920x1080. framerate: 23.98. format: VDPAU
19:21:25 T:139991896848128 NOTICE: Display resolution ADJUST : HDMI-0: 1920x1080 @ 24.00Hz (21) (weight: 0.001)
19:21:25 T:139991896848128 DEBUG: CVideoReferenceClock: Clock speed 100.100000%
19:21:25 T:139993780455360 NOTICE: Using GL_TEXTURE_2D
19:21:25 T:139993780455360 NOTICE: GL: Using VDPAU render method
19:21:25 T:139993780455360 NOTICE: GL: NPOT texture support detected
19:21:25 T:139993780455360 NOTICE: GL: Using GL_ARB_pixel_buffer_object
19:21:25 T:139993780455360 DEBUG: Activating window ID: 12005
19:21:25 T:139993780455360 DEBUG: ------ Window Deinit (MyVideoNav.xml) ------
19:21:25 T:139993780455360 DEBUG: OnLostDevice - notify display change event
19:21:25 T:139993780455360 DEBUG: Flush - flushing renderer
19:21:25 T:139993780455360 NOTICE: CVDPAU::OnLostDevice event
19:21:25 T:139993780455360 DEBUG: GLX: Destroying glPixmap
19:21:25 T:139993780455360 DEBUG: GLX: Destroying XPixmap
19:21:25 T:139993780455360 NOTICE: (VDPAU) FiniVDPAUOutput
19:21:25 T:139993780455360 INFO: XRANDR: /usr/lib/xbmc/xbmc-xrandr --output HDMI-0 --mode 0x4a
19:21:25 T:139993337231104 INFO: CAESinkALSA::Initialize - Attempting to open device "@"
19:21:25 T:139993337231104 INFO: CAESinkALSA::Initialize - Opened device "surround51"
19:21:25 T:139993337231104 INFO: CAESinkALSA::InitializeHW - Your hardware does not support AE_FMT_FLOAT, trying other formats
19:21:25 T:139993337231104 INFO: CAESinkALSA::InitializeHW - Using data format AE_FMT_S24NE4
19:21:25 T:139993337231104 DEBUG: CAESinkALSA::InitializeHW - Request: periodSize 2400, bufferSize 9600
19:21:25 T:139993337231104 DEBUG: CAESinkALSA::InitializeHW - Got: periodSize 2400, bufferSize 9600
19:21:25 T:139993337231104 DEBUG: CAESinkALSA::InitializeHW - Setting timeout to 200 ms
19:21:25 T:139993337231104 DEBUG: CSoftAE::InternalOpenSink - ALSA Initialized:
19:21:25 T:139993337231104 DEBUG: Output Device : Default (Xonar DX Multichannel)
19:21:25 T:139993337231104 DEBUG: Sample Rate : 48000
19:21:25 T:139993337231104 DEBUG: Sample Format : AE_FMT_S24NE4
19:21:25 T:139993337231104 DEBUG: Channel Count : 6
19:21:25 T:139993337231104 DEBUG: Channel Layout: FL,FR,BL,BR,FC,LFE
19:21:25 T:139993337231104 DEBUG: Frames : 2400
19:21:25 T:139993337231104 DEBUG: Frame Samples : 14400
19:21:25 T:139993337231104 DEBUG: Frame Size : 24
19:21:25 T:139993337231104 DEBUG: CSoftAE::InternalOpenSink - Using speaker layout: 5.1
19:21:25 T:139993337231104 DEBUG: CSoftAE::InternalOpenSink - Internal Buffer Size: 57600
19:21:25 T:139993337231104 DEBUG: AERemap: Downmix normalization is disabled
19:21:25 T:139992949044992 DEBUG: Previous line repeats 4 times.
19:21:25 T:139992949044992 DEBUG: CDVDPlayer::SetCaching - caching state 0
19:21:25 T:139993337231104 DEBUG: AERemap: Downmix normalization is disabled
19:21:25 T:139993337231104 DEBUG: Previous line repeats 1 times.
19:21:25 T:139993337231104 DEBUG: CSoftAEStream::CSoftAEStream - Converting from AE_FMT_S16NE to AE_FMT_FLOAT
19:21:25 T:139991888455424 DEBUG: CDVDPlayerAudio:: synctype set to 2: resample
19:21:25 T:139991888455424 DEBUG: CDVDPlayerAudio:: Discontinuity1 - was:4139.147000, should be:99.419667, error:-4039.727333
19:21:25 T:139991888455424 DEBUG: CDVDPlayerAudio - CDVDMsg::GENERAL_RESYNC(10000.000000, 1)
19:21:25 T:139992949044992 DEBUG: CDVDPlayer::HandleMessages - player started 1
19:21:25 T:139993337231104 DEBUG: CSoftAE::Run - Sink restart flagged
19:21:25 T:139993337231104 INFO: CSoftAE::LoadSettings - Stereo upmix is enabled
19:21:25 T:139993337231104 INFO: CSoftAE::InternalOpenSink - keeping old sink with : AE_FMT_FLOAT, FL,FR,FC,BL,BR,LFE, 48000hz
19:21:25 T:139993337231104 DEBUG: CSoftAE::InternalOpenSink - Using speaker layout: 5.1
19:21:25 T:139993337231104 DEBUG: CSoftAE::InternalOpenSink - Internal Buffer Size: 57600
19:21:25 T:139992957437696 DEBUG: CVideoReferenceClock: detected 1 vblanks, missed 2, refreshrate might have changed
19:21:25 T:139993780455360 ERROR: GLX: Same window as before, refreshing context
19:21:25 T:139993780455360 INFO: GL: Maximum texture width: 16384
19:21:25 T:139993780455360 DEBUG: CRenderManager::UpdateDisplayLatency - Latency set to 0 msec
19:21:25 T:139993780455360 DEBUG: ------ Window Init (VideoFullScreen.xml) ------
19:21:25 T:139993780455360 INFO: Loading skin file: VideoFullScreen.xml, load type: KEEP_IN_MEMORY
19:21:25 T:139993780455360 NOTICE: Using GL_TEXTURE_2D
19:21:25 T:139991896848128 NOTICE: CVDPAU::Check waiting for display reset event
19:21:25 T:139993780455360 NOTICE: GL: Using VDPAU render method
19:21:25 T:139993780455360 NOTICE: GL: NPOT texture support detected
19:21:25 T:139993780455360 NOTICE: GL: Using GL_ARB_pixel_buffer_object
19:21:25 T:139993780455360 DEBUG: CheckDisplayEvents: Received RandR event 89
19:21:25 T:139993780455360 DEBUG: CheckDisplayEvents - notify display reset event
19:21:25 T:139993780455360 NOTICE: CVDPAU::OnResetDevice event
19:21:25 T:139991896848128 NOTICE: Attempting recovery
19:21:25 T:139991896848128 NOTICE: vdp_device = 0x00000001 vdp_st = 0x00000000
19:21:25 T:139991896848128 DEBUG: CDVDPlayerVideo - video decoder was flushed
19:21:25 T:139991896848128 DEBUG: CVDPAU::FFReleaseBuffer - ignoring invalid buffer
19:21:25 T:139991896848128 DEBUG: Previous line repeats 3 times.
19:21:25 T:139991896848128 NOTICE: (VDPAU) screenWidth:1920 vidWidth:1920 surfaceWidth:1920
19:21:25 T:139991896848128 NOTICE: (VDPAU) screenHeight:1080 vidHeight:1080 surfaceHeight:1088
19:21:25 T:139992949044992 DEBUG: CDVDPlayer::HandleMessages - player started 2
19:21:25 T:139991896848128 NOTICE: Creating 1920x1080 pixmap
19:21:25 T:139991896848128 DEBUG: Found 60 fbconfigs.
19:21:25 T:139991896848128 DEBUG: Using fbconfig index 0.
19:21:25 T:139991896848128 NOTICE: (VDPAU) Total Output Surfaces Available: 2 of a max (tmp: 2 const: 4)
19:21:25 T:139991896848128 NOTICE: (VDPAU) Creating the video mixer
19:21:25 T:139991896848128 DEBUG: CVideoReferenceClock: Clock speed 104.270833%
19:21:25 T:139993780455360 DEBUG: ------ Window Deinit (DialogBusy.xml) ------
19:21:25 T:139993780455360 ERROR: CWinSystemX11::XErrorHandler: BadDrawable (invalid Pixmap or Window parameter), type:0, serial:19101, error_code:9, request_code:152 minor_code:8
19:21:26 T:139991888455424 DEBUG: CDVDPlayerAudio:: Discontinuity1 - was:597724.273333, should be:497666.666667, error:-100057.606667
19:21:26 T:139992957437696 DEBUG: CVideoReferenceClock: Received RandR event 89
19:21:27 T:139992957437696 DEBUG: CVideoReferenceClock: Detected refreshrate: 24 hertz
19:21:27 T:139991888455424 DEBUG: CDVDPlayerAudio:: Discontinuity1 - was:941996.125667, should be:782833.402667, error:-159162.723000
19:21:27 T:139991896848128 DEBUG: CVideoReferenceClock: Clock speed 100.100000%
19:21:27 T:139991888455424 DEBUG: CDVDPlayerAudio:: Discontinuity1 - was:1096842.754667, should be:1310812.627000, error:213969.872333
19:21:27 T:139991888455424 DEBUG: CDVDPlayerAudio:: Discontinuity1 - was:1410874.922000, should be:1543306.990333, error:132432.068333
19:21:27 T:139991888455424 DEBUG: CDVDPlayerAudio:: Discontinuity1 - was:1692760.338333, should be:1830683.329000, error:137922.990667
19:21:27 T:139991888455424 DEBUG: CDVDPlayerAudio:: Discontinuity1 - was:1931490.324000, should be:2062739.533667, error:131249.209667
19:21:27 T:139991888455424 DEBUG: CDVDPlayerAudio:: Discontinuity1 - was:2212469.159667, should be:2347929.139333, error:135459.979667
19:21:30 T:139991896848128 DEBUG: CPullupCorrection: detected pattern of length 1: 41708.33, frameduration: 41708.333333
19:21:31 T:139992932259584 DEBUG: webserver: request received for /jsonrpc
19:21:31 T:139992932259584 DEBUG: JSONRPC: Incoming request: [{"id":0,"jsonrpc":"2.0","method":"Player.GetActivePlayers"},{"id":1,"jsonrpc":"2.0","method":"Application.GetProperties","params":{"properties":["volume","muted"]}}]
19:21:31 T:139992932259584 DEBUG: JSONRPC: Calling player.getactiveplayers
19:21:31 T:139992932259584 DEBUG: JSONRPC: Calling application.getproperties
19:21:36 T:139992932259584 DEBUG: webserver: request received for /jsonrpc
19:21:36 T:139992932259584 DEBUG: JSONRPC: Incoming request: [{"id":2,"jsonrpc":"2.0","method":"Player.GetProperties","params":{"playerid":1,"properties":["audiostreams","canseek","currentaudiostream","currentsubtitle","partymode","playlistid","position","repeat","shuffled","speed","subtitleenabled","subtitles","time","totaltime","type"]}},{"id":3,"jsonrpc":"2.0","method":"Player.GetItem","params":{"playerid":1,"properties":["album","albumartist","artist","director","episode","fanart","file","genre","plot","rating","season","showtitle","studio","imdbnumber","tagline","thumbnail","title","track","writer","year","streamdetails","originaltitle"]}}]
19:21:36 T:139992932259584 DEBUG: JSONRPC: Calling player.getproperties
19:21:36 T:139992932259584 DEBUG: JSONRPC: Calling player.getitem
19:21:38 T:139993780455360 DEBUG: Keyboard: scancode: ae, sym: 00b2, unicode: 0000, modifier: 0
19:21:38 T:139993780455360 DEBUG: OnKey: stop (f0bc) pressed, action is Stop
19:21:38 T:139993780455360 NOTICE: CDVDPlayer::CloseFile()
19:21:38 T:139993780455360 NOTICE: DVDPlayer: waiting for threads to exit
19:21:38 T:139992949044992 NOTICE: CDVDPlayer::OnExit()
19:21:38 T:139992949044992 NOTICE: DVDPlayer: closing audio stream
19:21:38 T:139992949044992 NOTICE: Closing audio stream
19:21:38 T:139992949044992 NOTICE: Waiting for audio thread to exit
19:21:38 T:139991888455424 NOTICE: thread end: CDVDPlayerAudio::OnExit()
19:21:38 T:139991888455424 DEBUG: Thread CDVDPlayerAudio 139991888455424 terminating
19:21:38 T:139992949044992 NOTICE: Closing audio device
19:21:38 T:139992949044992 DEBUG: CSoftAEStream::~CSoftAEStream - Destructed
19:21:38 T:139992949044992 NOTICE: Deleting audio codec
19:21:38 T:139992949044992 NOTICE: DVDPlayer: closing video stream
19:21:38 T:139992949044992 NOTICE: Closing video stream
19:21:38 T:139992949044992 NOTICE: waiting for video thread to exit
19:21:38 T:139993337231104 DEBUG: CSoftAE::Run - Sink restart flagged
19:21:38 T:139993337231104 INFO: CSoftAE::LoadSettings - Stereo upmix is enabled
19:21:38 T:139993337231104 INFO: CSoftAE::InternalOpenSink - sink incompatible, re-starting
19:21:39 T:139991896848128 NOTICE: thread end: video_thread
19:21:39 T:139991896848128 DEBUG: Thread CDVDPlayerVideo 139991896848128 terminating
19:21:39 T:139992949044992 NOTICE: deleting video codec
19:21:39 T:139992949044992 NOTICE: CDVDPlayer::OnExit() deleting demuxer
19:21:39 T:139992949044992 NOTICE: CDVDPlayer::OnExit() deleting input stream
19:21:39 T:139992949044992 DEBUG: CSmbFile::Close closing fd 10001
19:21:39 T:139992949044992 DEBUG: CAnnouncementManager - Announcement: OnStop from xbmc
19:21:39 T:139992949044992 DEBUG: GOT ANNOUNCEMENT, type: 1, from xbmc, message OnStop
19:21:39 T:139992949044992 DEBUG: Thread CDVDPlayer 139992949044992 terminating
19:21:39 T:139993780455360 NOTICE: DVDPlayer: finished waiting
19:21:39 T:139993780455360 DEBUG: LinuxRendererGL: Cleaning up GL resources
19:21:39 T:139993780455360 NOTICE: (VDPAU) Close
19:21:39 T:139993780455360 DEBUG: GLX: Destroying glPixmap
19:21:39 T:139993780455360 DEBUG: GLX: Destroying XPixmap
19:21:39 T:139993780455360 NOTICE: (VDPAU) FiniVDPAUOutput
19:21:39 T:139993780455360 DEBUG: CGUIWindowManager::PreviousWindow: Deactivate
19:21:39 T:139993780455360 DEBUG: ------ Window Deinit (VideoFullScreen.xml) ------
19:21:39 T:139993780455360 DEBUG: OnLostDevice - notify display change event
19:21:39 T:139993780455360 DEBUG: Flush - flushing renderer
19:21:39 T:139993780455360 INFO: XRANDR: /usr/lib/xbmc/xbmc-xrandr --output HDMI-0 --mode 0x47
19:21:39 T:139993337231104 INFO: CAESinkALSA::Initialize - Attempting to open device "@"
19:21:39 T:139993337231104 INFO: CAESinkALSA::Initialize - Opened device "surround51"
19:21:39 T:139993337231104 INFO: CAESinkALSA::InitializeHW - Your hardware does not support AE_FMT_FLOAT, trying other formats
19:21:39 T:139993337231104 INFO: CAESinkALSA::InitializeHW - Using data format AE_FMT_S24NE4
19:21:39 T:139993337231104 DEBUG: CAESinkALSA::InitializeHW - Request: periodSize 2205, bufferSize 8820
19:21:39 T:139993337231104 DEBUG: CAESinkALSA::InitializeHW - Got: periodSize 2204, bufferSize 8820
19:21:39 T:139993337231104 DEBUG: CAESinkALSA::InitializeHW - Setting timeout to 200 ms
19:21:39 T:139993337231104 DEBUG: CSoftAE::InternalOpenSink - ALSA Initialized:
19:21:39 T:139993337231104 DEBUG: Output Device : Default (Xonar DX Multichannel)
19:21:39 T:139993337231104 DEBUG: Sample Rate : 44100
19:21:39 T:139993337231104 DEBUG: Sample Format : AE_FMT_S24NE4
19:21:39 T:139993337231104 DEBUG: Channel Count : 6
19:21:39 T:139993337231104 DEBUG: Channel Layout: FL,FR,BL,BR,FC,LFE
19:21:39 T:139993337231104 DEBUG: Frames : 2204
19:21:39 T:139993337231104 DEBUG: Frame Samples : 13224
19:21:39 T:139993337231104 DEBUG: Frame Size : 24
19:21:39 T:139993337231104 DEBUG: CSoftAE::InternalOpenSink - Using speaker layout: 5.1
19:21:39 T:139993337231104 DEBUG: CSoftAE::InternalOpenSink - Internal Buffer Size: 52896
19:21:39 T:139993337231104 DEBUG: AERemap: Downmix normalization is disabled
19:21:39 T:139993780455360 DEBUG: Previous line repeats 5 times.
19:21:39 T:139993780455360 ERROR: GLX: Same window as before, refreshing context
19:21:39 T:139993780455360 INFO: GL: Maximum texture width: 16384
19:21:39 T:139993780455360 DEBUG: CRenderManager::UpdateDisplayLatency - Latency set to 0 msec
19:21:39 T:139993780455360 DEBUG: CheckDisplayEvents: Received RandR event 89
19:21:39 T:139993780455360 DEBUG: CheckDisplayEvents - notify display reset event
19:21:39 T:139993780455360 DEBUG: CGUIWindowManager::PreviousWindow: Activate new
19:21:39 T:139993780455360 DEBUG: ------ Window Init (MyVideoNav.xml) ------
19:21:39 T:139993780455360 DEBUG: CGUIMediaWindow::GetDirectory (videodb://1/2/)
19:21:39 T:139993780455360 DEBUG: ParentPath = [videodb://1/2/]
19:21:39 T:139993780455360 DEBUG: RunQuery took 8 ms for 357 items query: select * from movieview
19:21:39 T:139992126953216 NOTICE: Thread Background Loader start, auto delete: false
19:21:39 T:139992126953216 DEBUG: Thread Background Loader 139992126953216 terminating
19:21:39 T:139992126953216 NOTICE: Thread Background Loader start, auto delete: false
19:21:39 T:139992126953216 DEBUG: Thread Background Loader 139992126953216 terminating
19:21:39 T:139993780455360 DEBUG: ExecuteXBMCAction : Translating ClearProperty(BrowseActors,home)
19:21:39 T:139993780455360 DEBUG: ExecuteXBMCAction : To ClearProperty(BrowseActors,home)
19:21:39 T:139993780455360 NOTICE: CDVDPlayer::CloseFile()
19:21:39 T:139993780455360 WARNING: CDVDMessageQueue(player)::Put MSGQ_NOT_INITIALIZED
19:21:39 T:139993780455360 NOTICE: DVDPlayer: waiting for threads to exit
19:21:39 T:139993780455360 NOTICE: DVDPlayer: finished waiting
19:21:39 T:139993780455360 DEBUG: LinuxRendererGL: Cleaning up GL resources
19:21:39 T:139992957437696 DEBUG: CVideoReferenceClock: Cleaning up GLX
19:21:39 T:139992957437696 DEBUG: Thread CVideoReferenceClock 139992957437696 terminating
19:21:39 T:139991938168576 DEBUG: DoWork - Saving file state for video item smb://ANDI/xxx.mkv
19:21:39 T:139991938168576 DEBUG: CAnnouncementManager - Announcement: OnUpdate from xbmc
19:21:39 T:139991938168576 DEBUG: GOT ANNOUNCEMENT, type: 16, from xbmc, message OnUpdate
19:21:40 T:139993069709056 DEBUG: JSONRPC: Incoming request: {"jsonrpc": "2.0", "id": 1, "method": "VideoLibrary.GetMovies", "params": {"properties": ["title", "originaltitle", "playcount", "year", "genre", "studio", "country", "tagline", "plot", "runtime", "file", "plotoutline", "lastplayed", "trailer", "rating", "resume", "art", "streamdetails", "mpaa", "director"], "limits": {"end": 20}, "sort": {"order": "descending", "method": "lastplayed"}, "filter": {"field": "inprogress", "operator": "true", "value": ""}}}
19:21:40 T:139993069709056 DEBUG: JSONRPC: Calling videolibrary.getmovies
19:21:40 T:139993069709056 DEBUG: RunQuery took 1 ms for 1 items query: select * from movieview WHERE (movieview.idFile IN (select idFile from bookmark where type = 1))
19:21:40 T:139993069709056 DEBUG: JSONRPC: Incoming request: {"jsonrpc": "2.0", "id": 1, "method": "VideoLibrary.GetMovies", "params": {"properties": ["title", "originaltitle", "playcount", "year", "genre", "studio", "country", "tagline", "plot", "runtime", "file", "plotoutline", "lastplayed", "trailer", "rating", "resume", "art", "streamdetails", "mpaa", "director"], "limits": {"end": 20}, "sort": {"order": "descending", "method": "dateadded"}, "filter": {"field": "playcount", "operator": "is", "value": "0"}}}
19:21:40 T:139993069709056 DEBUG: JSONRPC: Calling videolibrary.getmovies
19:21:40 T:139993069709056 DEBUG: RunQuery took 9 ms for 183 items query: select * from movieview WHERE ((movieview.playCount IS NULL OR movieview.playCount = 0))
19:21:43 T:139993780455360 DEBUG: Keyboard: scancode: 24, sym: 000d, unicode: 000d, modifier: 0
19:21:43 T:139993780455360 DEBUG: OnKey: return (f00d) pressed, action is Select
19:21:43 T:139993780455360 DEBUG: OnPlayMedia smb://ANDI/xxx.mkv
19:21:43 T:139993780455360 DEBUG: CAnnouncementManager - Announcement: OnClear from xbmc
19:21:43 T:139993780455360 DEBUG: GOT ANNOUNCEMENT, type: 2, from xbmc, message OnClear
19:21:43 T:139993780455360 DEBUG: CAnnouncementManager - Announcement: OnAdd from xbmc
19:21:43 T:139993780455360 DEBUG: GOT ANNOUNCEMENT, type: 2, from xbmc, message OnAdd
19:21:43 T:139993780455360 DEBUG: CPlayerCoreFactory::GetPlayers(smb://ANDI/xxx.mkv)
19:21:43 T:139993780455360 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: system rules
19:21:43 T:139993780455360 DEBUG: CPlayerSelectionRule::GetPlayers: matches rule: system rules
19:21:43 T:139993780455360 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: rtv
19:21:43 T:139993780455360 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: hdhomerun/myth/mms/udp
19:21:43 T:139993780455360 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: lastfm/shout
19:21:43 T:139993780455360 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: rtmp
19:21:43 T:139993780455360 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: rtsp
19:21:43 T:139993780455360 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: streams
19:21:43 T:139993780455360 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: dvd
19:21:43 T:139993780455360 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: dvdimage
19:21:43 T:139993780455360 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: sdp/asf
19:21:43 T:139993780455360 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: nsv
19:21:43 T:139993780455360 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: radio
19:21:43 T:139993780455360 DEBUG: CPlayerCoreFactory::GetPlayers: matched 0 rules with players
19:21:43 T:139993780455360 DEBUG: CPlayerCoreFactory::GetPlayers: adding videodefaultplayer (1)
19:21:43 T:139993780455360 DEBUG: CPlayerCoreFactory::GetPlayers: for video=1, audio=0
19:21:43 T:139993780455360 DEBUG: CPlayerCoreFactory::GetPlayers: for video=1, audio=1
19:21:43 T:139993780455360 DEBUG: CPlayerCoreFactory::GetPlayers: adding player: DVDPlayer (1)
19:21:43 T:139993780455360 DEBUG: CPlayerCoreFactory::GetPlayers: added 1 players
19:21:43 T:139993780455360 NOTICE: DVDPlayer: Opening: smb://ANDI/xxx.mkv
19:21:43 T:139993780455360 WARNING: CDVDMessageQueue(player)::Put MSGQ_NOT_INITIALIZED
19:21:43 T:139993780455360 DEBUG: CRenderManager::UpdateDisplayLatency - Latency set to 0 msec
19:21:43 T:139993780455360 DEBUG: LinuxRendererGL: Cleaning up GL resources
19:21:43 T:139993780455360 DEBUG: CLinuxRendererGL::PreInit - precision of luminance 16 is 16
19:21:43 T:139992957437696 NOTICE: Thread CDVDPlayer start, auto delete: false
19:21:43 T:139992957437696 NOTICE: Creating InputStream
19:21:43 T:139992957437696 DEBUG: CSmbFile::Open - opened xxx.mkv, fd=10001
19:21:43 T:139992957437696 DEBUG: ScanForExternalSubtitles: Searching for subtitles...
19:21:43 T:139992957437696 DEBUG: OpenDir - Using authentication url smb://ANDI/Filme
19:21:43 T:139993780455360 DEBUG: ------ Window Init (DialogBusy.xml) ------
19:21:43 T:139992957437696 DEBUG: ScanForExternalSubtitles: END (total time: 648 ms)
19:21:43 T:139992957437696 NOTICE: Creating Demuxer
19:21:43 T:139992957437696 DEBUG: Open - probing detected format [matroska,webm]
19:21:43 T:139992957437696 DEBUG: Open - avformat_find_stream_info starting
19:21:44 T:139992957437696 DEBUG: Open - av_find_stream_info finished
19:21:44 T:139992957437696 INFO: ffmpeg[A67FC700]: Input #0, matroska,webm, from 'smb://ANDI/xxx.mkv':
19:21:44 T:139992957437696 INFO: ffmpeg[A67FC700]: Duration: 01:27:57.02, start: 0.000000, bitrate: 13143 kb/s
19:21:44 T:139992957437696 INFO: ffmpeg[A67FC700]: Stream #0:0(ger): Video: h264 (High), yuv420p, 1920x1080 [SAR 1:1 DAR 16:9], 23.98 fps, 23.98 tbr, 1k tbn, 47.95 tbc (default)
19:21:44 T:139992957437696 INFO: ffmpeg[A67FC700]: Stream #0:1(ger): Audio: dts (DTS), 48000 Hz, 5.1(side), s16, 1536 kb/s (default)
19:21:44 T:139992957437696 INFO: ffmpeg[A67FC700]: Metadata:
19:21:44 T:139992957437696 INFO: ffmpeg[A67FC700]: title : German
19:21:44 T:139992957437696 INFO: ffmpeg[A67FC700]: Stream #0:2(eng): Audio: dts (DTS), 48000 Hz, 5.1(side), s16, 1536 kb/s
19:21:44 T:139992957437696 INFO: ffmpeg[A67FC700]: Metadata:
19:21:44 T:139992957437696 INFO: ffmpeg[A67FC700]: title : English
19:21:44 T:139992957437696 NOTICE: Opening video stream: 0 source: 256
19:21:44 T:139992957437696 NOTICE: Creating video codec with codec id: 28
19:21:44 T:139992957437696 DEBUG: CDVDFactoryCodec: compiled in hardware support: CrystalHD:no OpenMax:no VDPAU:yes VAAPI:yes
19:21:44 T:139992957437696 DEBUG: FactoryCodec - Video: - Opening
19:21:44 T:139992957437696 NOTICE: CDVDVideoCodecFFmpeg::Open() Creating VDPAU(1920x1080, 28)
19:21:46 T:139992932259584 DEBUG: webserver: request received for /jsonrpc
19:21:46 T:139992932259584 DEBUG: JSONRPC: Incoming request: [{"id":0,"jsonrpc":"2.0","method":"Player.GetActivePlayers"},{"id":1,"jsonrpc":"2.0","method":"Application.GetProperties","params":{"properties":["volume","muted"]}}]
19:21:46 T:139992932259584 DEBUG: JSONRPC: Calling player.getactiveplayers
19:21:46 T:139992932259584 DEBUG: JSONRPC: Calling application.getproperties
19:21:47 T:139992823219968 DEBUG: webserver: request received for /image/image%3A%2F%2Fhttp%253a%252f%252fcf2.imgobject.com%252ft%252fp%252foriginal%252frbrQPjl2n4gTPsPXim9ckpRuycg.jpg%2F
19:21:48 T:139992823219968 DEBUG: webserver: request received for /jsonrpc
19:21:48 T:139992823219968 DEBUG: JSONRPC: Incoming request: [{"id":0,"jsonrpc":"2.0","method":"Player.GetActivePlayers"},{"id":1,"jsonrpc":"2.0","method":"Application.GetProperties","params":{"properties":["volume","muted"]}}]
19:21:48 T:139992823219968 DEBUG: JSONRPC: Calling player.getactiveplayers
19:21:48 T:139992823219968 DEBUG: JSONRPC: Calling application.getproperties
19:21:48 T:139992932259584 DEBUG: webserver: request received for /image/image%3A%2F%2Fhttp%253a%252f%252fcf2.imgobject.com%252ft%252fp%252foriginal%252frbrQPjl2n4gTPsPXim9ckpRuycg.jpg%2F
19:21:53 T:139993337231104 DEBUG: Previous line repeats 2 times.
19:21:53 T:139993337231104 DEBUG: Suspended the Sink
Playing Live TV with xvdr (0.9.8-1, self compiled and packaged from github) fails every time with a freeze:
19:48:04 T:140440470034368 DEBUG: ------ Window Init (MyPVR.xml) ------
19:48:04 T:140440470034368 INFO: Loading skin file: MyPVR.xml, load type: LOAD_EVERY_TIME
19:48:04 T:140440470034368 DEBUG: CGUIMediaWindow::GetDirectory ()
19:48:04 T:140440470034368 DEBUG: ParentPath = []
19:48:04 T:140440470034368 DEBUG: CGUIWindowPVRCommon - OnMessageFocus - focus set to window 'tv'
19:48:04 T:140440470034368 DEBUG: CGUIWindowPVRChannels - UpdateData - update window 'tv'. set view to 11
19:48:04 T:140440470034368 DEBUG: CGUIMediaWindow::GetDirectory (pvr://channels/tv/Alle TV-Kanäle/)
19:48:04 T:140440470034368 DEBUG: ParentPath = []
19:48:04 T:140438627669760 DEBUG: CPVRDirectory::GetDirectory(pvr://channels/tv/Alle TV-Kanäle)
19:48:04 T:140439491426048 NOTICE: Thread PVR Channel Window start, auto delete: false
19:48:04 T:140440470034368 DEBUG: CGUIWindowPVRCommon - OnMessageFocus - focus set to window 'tv'
19:48:05 T:140440470034368 DEBUG: Previous line repeats 1 times.
19:48:05 T:140440470034368 DEBUG: Keyboard: scancode: 24, sym: 000d, unicode: 000d, modifier: 0
19:48:05 T:140440470034368 DEBUG: OnKey: return (f00d) pressed, action is Select
19:48:06 T:140440470034368 DEBUG: CPlayerCoreFactory::GetPlayers(pvr://channels/tv/Alle TV-Kanäle/0.pvr)
19:48:06 T:140440470034368 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: system rules
19:48:06 T:140440470034368 DEBUG: CPlayerSelectionRule::GetPlayers: matches rule: system rules
19:48:06 T:140440470034368 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: rtv
19:48:06 T:140440470034368 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: hdhomerun/myth/mms/udp
19:48:06 T:140440470034368 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: lastfm/shout
19:48:06 T:140440470034368 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: rtmp
19:48:06 T:140440470034368 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: rtsp
19:48:06 T:140440470034368 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: streams
19:48:06 T:140440470034368 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: dvd
19:48:06 T:140440470034368 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: dvdimage
19:48:06 T:140440470034368 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: sdp/asf
19:48:06 T:140440470034368 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: nsv
19:48:06 T:140440470034368 DEBUG: CPlayerSelectionRule::GetPlayers: considering rule: radio
19:48:06 T:140440470034368 DEBUG: CPlayerCoreFactory::GetPlayers: matched 0 rules with players
19:48:06 T:140440470034368 DEBUG: CPlayerCoreFactory::GetPlayers: adding videodefaultplayer (1)
19:48:06 T:140440470034368 DEBUG: CPlayerCoreFactory::GetPlayers: for video=1, audio=0
19:48:06 T:140440470034368 DEBUG: CPlayerCoreFactory::GetPlayers: for video=1, audio=1
19:48:06 T:140440470034368 DEBUG: CPlayerCoreFactory::GetPlayers: adding player: DVDPlayer (1)
19:48:06 T:140440470034368 DEBUG: CPlayerCoreFactory::GetPlayers: added 1 players
19:48:06 T:140440470034368 NOTICE: DVDPlayer: Opening: pvr://channels/tv/Alle TV-Kanäle/0.pvr
19:48:06 T:140440470034368 WARNING: CDVDMessageQueue(player)::Put MSGQ_NOT_INITIALIZED
19:48:06 T:140440470034368 DEBUG: CRenderManager::UpdateDisplayLatency - Latency set to 0 msec
19:48:06 T:140440470034368 DEBUG: LinuxRendererGL: Cleaning up GL resources
19:48:06 T:140440470034368 DEBUG: CLinuxRendererGL::PreInit - precision of luminance 16 is 16
19:48:06 T:140440470034368 DEBUG: SECTION:LoadDLL(special://xbmcbin/system/players/dvdplayer/avutil-51-x86_64-linux.so)
19:48:06 T:140440470034368 DEBUG: Loading: /usr/lib/xbmc/system/players/dvdplayer/avutil-51-x86_64-linux.so
19:48:06 T:140440470034368 DEBUG: SECTION:LoadDLL(special://xbmcbin/system/players/dvdplayer/swscale-2-x86_64-linux.so)
19:48:06 T:140440470034368 DEBUG: Loading: /usr/lib/xbmc/system/players/dvdplayer/swscale-2-x86_64-linux.so
19:48:06 T:140438879053568 NOTICE: Thread CDVDPlayer start, auto delete: false
19:48:06 T:140438879053568 NOTICE: Creating InputStream
19:48:06 T:140438879053568 DEBUG: PVRManager - OpenLiveStream - opening live stream on channel 'Das Erste HD'
19:48:06 T:140438879053568 DEBUG: opening live stream for channel 'Das Erste HD'
19:48:06 T:140440470034368 DEBUG: ------ Window Init (DialogBusy.xml) ------
19:48:06 T:140438879053568 DEBUG: AddOnLog: VDR XVDR Client: Possible leak caused by workaround in GetLanguageCode
19:48:06 T:140438879053568 INFO: AddOnLog: VDR XVDR Client: Logged in at '1377798483+7200' to 'VDR-XVDR Server' Version: '0.9.9' with protocol version '4'
19:48:06 T:140438879053568 INFO: AddOnLog: VDR XVDR Client: Preferred Audio Language: deu
19:48:06 T:140438879053568 DEBUG: AddOnLog: VDR XVDR Client: changing to channel 1640430212 (priority 50)
19:48:06 T:140438879053568 INFO: AddOnLog: VDR XVDR Client: sucessfully switched channel
19:48:06 T:140438879053568 DEBUG: PVRFile - Open - playback has started on filename pvr://channels/tv/Alle TV-Kanäle/0.pvr
19:48:06 T:140438879053568 DEBUG: CDVDInputStreamPVRManager::Open - stream opened: pvr://channels/tv/Alle TV-Kanäle/0.pvr
19:48:06 T:140438879053568 NOTICE: Creating Demuxer
19:48:06 T:140438879053568 DEBUG: SECTION:LoadDLL(special://xbmcbin/system/players/dvdplayer/avcodec-53-x86_64-linux.so)
19:48:06 T:140438879053568 DEBUG: Loading: /usr/lib/xbmc/system/players/dvdplayer/avcodec-53-x86_64-linux.so
19:48:06 T:140438879053568 DEBUG: CDVDPlayer::SetCaching - caching state 2
19:48:06 T:140438879053568 WARNING: CDVDMessageQueue(audio)::Put MSGQ_NOT_INITIALIZED
19:48:06 T:140438879053568 WARNING: CDVDMessageQueue(video)::Put MSGQ_NOT_INITIALIZED
19:48:06 T:140440470034368 DEBUG: CGUIInfoManager::SetCurrentMovie(pvr://channels/tv/Alle TV-Kanäle/0.pvr)
19:48:06 T:140440470034368 DEBUG: CAnnouncementManager - Announcement: OnPlay from xbmc
19:48:06 T:140440470034368 DEBUG: GOT ANNOUNCEMENT, type: 1, from xbmc, message OnPlay
19:48:06 T:140440470034368 DEBUG: Building didl for object 'pvr://channels/tv/Alle TV-Kanäle/0.pvr'
19:48:06 T:140440470034368 DEBUG: ------ Window Deinit (DialogBusy.xml) ------
19:48:06 T:140438879053568 DEBUG: CDVDDemuxPVRClient::RequestStreams(): added/updated stream 0:5101 with codec_id 28
19:48:06 T:140438879053568 DEBUG: CDVDDemuxPVRClient::RequestStreams(): added/updated stream 1:5106 with codec_id 86019
19:48:06 T:140438879053568 DEBUG: CDVDDemuxPVRClient::RequestStreams(): added/updated stream 2:5102 with codec_id 86016
19:48:06 T:140438879053568 DEBUG: CDVDDemuxPVRClient::RequestStreams(): added/updated stream 3:5103 with codec_id 86016
19:48:06 T:140438879053568 DEBUG: CDVDDemuxPVRClient::RequestStreams(): added/updated stream 4:5105 with codec_id 94209
19:48:06 T:140438879053568 DEBUG: CDVDDemuxPVRClient::RequestStreams(): added/updated stream 5:5104 with codec_id 94215
19:48:06 T:140438879053568 NOTICE: Opening video stream: 0 source: 256
19:48:06 T:140438879053568 NOTICE: Creating video codec with codec id: 28
19:48:06 T:140438879053568 DEBUG: CDVDFactoryCodec: compiled in hardware support: CrystalHD:no OpenMax:no VDPAU:yes VAAPI:yes
19:48:06 T:140438879053568 DEBUG: FactoryCodec - Video: - Opening
19:48:06 T:140438879053568 DEBUG: SECTION:LoadDLL(special://xbmcbin/system/players/dvdplayer/swresample-0-x86_64-linux.so)
19:48:06 T:140438879053568 DEBUG: Loading: /usr/lib/xbmc/system/players/dvdplayer/swresample-0-x86_64-linux.so
19:48:06 T:140438879053568 DEBUG: SECTION:LoadDLL(special://xbmcbin/system/players/dvdplayer/avformat-53-x86_64-linux.so)
19:48:06 T:140438879053568 DEBUG: Loading: /usr/lib/xbmc/system/players/dvdplayer/avformat-53-x86_64-linux.so
19:48:06 T:140438879053568 DEBUG: SECTION:LoadDLL(special://xbmcbin/system/players/dvdplayer/avfilter-2-x86_64-linux.so)
19:48:06 T:140438879053568 DEBUG: Loading: /usr/lib/xbmc/system/players/dvdplayer/avfilter-2-x86_64-linux.so
19:48:06 T:140438879053568 NOTICE: CDVDVideoCodecFFmpeg::Open() Creating VDPAU(1280x720, 28)
19:48:16 T:140440026806016 DEBUG: Suspended the Sink
With Hardware Acceleration disabled in XBMC none of the problems described above occurs.
So does anybody here know how to approach this problem? I'd really like to use Arch on the HTPC. Is this a problem with Arch or shall I look for the cause more on the XBMC side?
Last edited by And1G (2013-08-29 18:05:38)And1G wrote:OK, for everyone who is interested, this problem is most likely caused by XBMC relying on the OpenGL extension GL_NV_vdpau_interop which is not available with the Radeon driver.
I'll go over to the XBMC forums with the issue, I hope they can help.
I followed your from the heise newsticker to here, as you have some fully wrong information.
xbmc implements as the first at all the GL vdpau interop. Which is used to use surfaces in both the decoder, vdpau and the presenter OpenGL. But - we still have all the "pixmap code" in place. So on Radeon vdpau, where this interop is not supported, we render into a pixmap and transfer that result afterwards back to OpenGL.
This works perfectly fine with e.g. mplayer - as the pixmap is the finished result, no need to transfer it any further. Xbmc is something special, cause we are fully 3D - radeon driver (be it GL part or whatever) is damn slow here, cause performance currently just sucks when rendering to pixmap and from there back to OpenGL.
We are in contact with all the AMD OSS devs to find a solution here.
Btw. nvidia ION-2 is fast enough for 1080p50 _with_ the pixmap approach, so you can imagine, that we currently search the issue somewhere else - especially in the AMD drivers.
Edit: On my current radeon vdpau oss tests with xbmc - mesa fills up with memory, leaks and dies after 20 minutes .... not a good situation to start anything.
Last edited by fritsch (2013-09-17 15:20:49) -
How does WLC prevent layer 2 loops between mesh and different wired networks
hi all,
i have a question in regards to layer 2 loops. in my network i have clients devices moving between 2 separated mesh networks. from WLC prespective, the mac addresses should've moved between multiple bridge group and wired network.
can someone please enlighten me how WLC prevent layer 2 loops?
i understand spanning tree in the wired network, but WLC is not using SPT in mesh
thank youThanks for your help! This really helps a lot! We actually only want to replace the autonmous access point with the controller solution and make one WLAN available at another site. From what I can see, this is possible with our current solution - we just need to switch from Layer 2 to Layer 3 and purchase the corresponding amount of supported Access Points (I think we should be able to get some refurbished ones).
Am I correct in assuming that the Access Points we want to replace (AIR-AP1230B-E-K9 with 802.11b radio only) cannot be upgraded to lightweight ones? Since if I understood document http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html correctly, this is not possible with access points that only have 802.11b radios.
Regarding the switch from Layer 2 to Layer 3: Do we really only need to perform the steps I described in my first post?
And one last question regarding REAP. As far as I understood this is only needed when local traffic needs to be maintained in case the connection to the WLC becomes unavailable. So we really don't need it if we want to access resources that are only available over the WLC?
Thanks again for your help!
Michael -
Roaming between mesh and non mesh and mesh AP design
Hi There,
I need some verification on the following:
- Can client roam between Mesh AP 1550 series and Non-Mesh AP?
- I have 1550 series AP to be installed and all the mounting area are with data point ready, which connects back to switch. Would configuring mesh for this outdoor units recommended, and guide on this. Current guide i am looking from cisco site is basically the AP do not have wired ethernet connection, my design here a bit different, all the AP's have wired connection back to the switch.
Kindly assist.
Thank you
RamaI have seen and done installs like this. The advantage is that you don't have to worry about the backhaul dropping. So it's like any LAP but big chunky outdoor AP. If the RAP looses Ethernet connectivity... Well it changes to a MAP. So you can look at
It as a benefit. It's always nice to be able to have Ethernet when you can.
Sent from Cisco Technical Support iPhone App -
Wism's and WLC 4400 Controllers on V4.2.61.0
Hi, I've multiple Wism's in 6504 chassis and several 4400 wlc controllers all on ver 4.2.61.0 all in the same mobility group.
ten in total. Recently we have had to create multiple mobility groups. I've applied access point templates to specify which controller to connect to
as a primary. For some unknown reason after i've created the separate mobility groups some devices go back to the original hosting controller even though it is now in a different mobility group and the wireless Lan id for the Ap is no longer on the blade/controller the devices attached to the Ap just probes
Can you please advise if there is anything I can do about this? I've tried pushing a another template to the Ap with it's new controller which reboots the Ap but it still goes back to the original host in the other mobility group.
Kind Regards,
CarlHi Carl,
Your LAPs joins the wrong WLC even when you've configured the primary/secondary controllers name OR IP address and you are using v4.2.61.0. Is this correct?
If so, then it's a well-known bug of the v4.x. Unfortunately, the workaround is CLI. It's unfortunate because you have to type the command on the WLC and specify the LAP.
The command is: config ap controller primary
This bug has been fixed on the 5.X and 6.X firmware.
Hope this helps. -
Lib32-ati-dri and lib32-mesa-dri in confilict, can't remove lib32-mesa
I recently reinstalled arch on one of my older computers. And in that installation I installed the open source ati drivers.
So I tried to install steam and decided to go ahead and use the lib32-ati-dri for it, it installed for me and everything was good.
I just tried to do an update and received this:
sudo pacman -Syu
:: Synchronizing package databases...
testing is up to date
core is up to date
extra is up to date
community-testing is up to date
community is up to date
multilib-testing is up to date
multilib is up to date
:: Starting full system upgrade...
:: Replace lib32-ati-dri with multilib-testing/lib32-mesa-dri? [Y/n]
I then obviously select no and received this:
resolving dependencies...
looking for inter-conflicts...
:: lib32-mesa-dri and lib32-ati-dri are in conflict. Remove lib32-ati-dri? [y/N]
If I select no again, the update fails (obviously :v), but if I select yes to either of those it uninstalls lib32-ati-dri and installs lib32-mesa-dri.
I then tried to just reinstall lib32-ati-dri, and it works. But when I update, I get the same prompt, over and over.
So I'm wondering if there is anyway to remedy this, or if I should just stick with the lib32-mesa-dri.
Thanks in advance to all you wonderful people!Scimmia wrote:
If you're running testing, you should really keep up on what's going on.
You should answer yes.
Yea I just got back after not keeping up with it for a year or so (didn't have it installed), so I better get on that XD. -
Is it possible that a mesh doesn't support PMS color separations?
We have a Illustrator CS4 logo containing a mesh with a spot,
but when imported in Indesign CS4, the spot color from illustrator doesn't show up
and the color turns out CMYK in color separation.
What do I do wrong?
Thanks
CS4
iMac LeopardAs far as transparency in Illustrator that goes way back before Adobe
brought such support. I had a plug in from Hotdoors I think as far
back as version 8 and I believe the plug in pre dates 6.
The bug problem was convincing them to bring it into ID and to
convince Quark as well for Xpress. They told me they were not certain
it could be done in a layout program, vector programs were different.
Vector programs were different. I pointed out that they had vector
tools in the layout programs, they agreed but still said it was the
only request for it they have ever had so you are correct I can be a
victim of they same thing they suffered from and cannot see the
possibility that sits right in front of me.
I would be very interested in seeing this for architectural
photography and presentation of designs in a photomontage project this
could be useful and very billable. -
More explanations about MESH and 802.11n
Hello,
I just begin WiFi installations and I have some existential questions.
I have 5 Cisco 1552-E APs. One of them is wired to LAN and act as RAP, the 4 others are MAP.
On each AP, I use 1, 6, 11 channels as 2,4GHz non-overlapping channels.
As I have a 802.11n network, I use 5GHz band with non-overlapping channels too. Because I'm in Europe and outdoor, I want to use 100, 112, 124, 136 and 140 channels.
But all the 5 APs have a MESH backhaul 5GHz link to connect to LAN.
Please clarify my mind, because I don't understand how it is possible for 2 APs, to communicate between themselves on a different 5GHz channel ??
Thank you,
ClementThere is a new model which has 3 antenna ports for the 5ghz and 3 antenna ports for the 2.4ghz. This allows you to use one of the Cisco mesh patch antennas for a longer backhaul shoot to the RAP or even a MAP. It's hard to say what you can do but that gives you more options.
Cisco Aironet 1552E/1552EU External Antenna Access Points
The Cisco Aironet 1552E/1552EU Outdoor Access Points are the standard models, dual-radio system with external antenna ports that are compliant with IEEE 802.11b/g/n standards (2.4 GHz) and 802.11a/n (5-GHz). The 1552E has three external antenna connections for dual-band omni or directional antennas. The 1552EU has six external antenna connections, three for 2.4 GHz and three for 5 GHz antennas, that support omni or directional antennas. They have Ethernet and fiber Small Form-Factor Pluggable (SFP) backhaul options, along with the option of a battery backup. These models also have a PoE-out port that can power a video surveillance camera or other devices. Highly flexible models, the Cisco Aironet 1552E/1552EU are well equipped for municipal and campus deployments, video surveillance applications, mining environments, and data offload.
Sent from Cisco Technical Support iPhone App -
Mesh and Flexconnect with WLC5508
Hi Community.
A customer have a bad coverage in a corner of his branch office. He like to add a mesh AP (MAP) in the near of that corner.
I checked allready the documention about Mesh but i'm not sure if Flexconnect and Mesh works togheter. This MAP is in a branch office and the WLC is in the head quarter therefore he likes to uses Flexconnect togheter with Mesh.
Best regards PatrickOaky, and if the AP is setup as RAP than other wireless clients cant connect to that AP anymore ?
I have to do Ethernet Bridging and give the Bridge Group a name, right? Set that on the MAP and the RAP.
I have to set the port on the switch where the RAP is connected to a trunk port, so all 3 WLANs (VLAN) can reach the switch over Wireless.
But how do i forward these 3 WLAN (VLAN) from the MAP to the RAP and finaly to the switch. -
I have been animating with Flash Pro for a while and just started using Illustrator. It has a really neat tool called gradient mesh. My question is can I export an object with a gradient mesh into Flash Pro and tween it to say rotate it or move its surface colors?
Thaks!
Billy -
DNS setup on server bound to AD and using domain controllers for DNS
My server is bound to our AD network and in the network pref I have entered the two IPs for the domain controllers on our network that serve DNS.
My question is, am I right not to enable/configure and start the DNS service on the Mac server since it is getting DNS already?
If yes, how do I confirm that my Mac server is correctly listed in our domain controllers DNS? Should I be concerned that I get the following?
knws3135:~ mactech$ sudo changeip -checkhostname
Password:
Primary address = 10.31.3.135
Current HostName = knws3135.ad.ewsad.net
The DNS hostname is not available, please repair DNS and re-run this tool.Hi
It looks all OK to me? As for the hostname having capitals could pose a problem but only if the Mac Server was its own KDC. Which it is not. If the hostname is defined as you have it now in the AD's DNS Service then leave it alone.
Sometimes even when DNS checks out OK you can still have fundamental errors that only demotion to Standalone will cure. I think this is the point that you are at now. To be honest I would do this. Judging from what you've said there would be very little to lose when you do this apart from managed preferences. These can easily be re-applyed on successful promotion.
needs to be changed so it is configured in Open Directory as connected to a Directory Server
Not sure what you mean by this?
If you have or are about to update your Server to 10.5.4 - which I recommend you do. Then you could follow this procedure:
Demote to Standalone
Stop all Services
Restart the Server
Update to 10.5.4. Restart the Server (this happens anyway)
Make sure your Server resolves on the forward and reverse pointers (again)
If you want run changeip again (you may be surprised)
Use the Active Directory plug in in Directory Utility to bind the Server to the AD. Make sure you use an AD admin account that has authority to do this. De-select 'force home directory creation on startup disk' I have a feeling this will be de-selected anyway.
After successful binding quit out of Directory Utility and launch Server Admin
Select the Open Directory Service
Change the role from Standalone to Open Directory Master
Create the Directory Administrator account's username and password. Don't be tempted to change the UID or use the system admin account's user name. You can use the same password if you wish. What I've done before in the past is to create the diradmin account on the AD first with full authority for the domain.
On successful promotion you should now see in the Overview Pane everything running apart from Kerberos which should be Stopped. This is how it should be. Apple's 10.5.4 Update has took a lot of the donkey work out of this whole process. No need for the command line. Simply click.
If you launch Directory Utility you should now see the server's loopback address has been added in the LDAPv3 Plugin. Also the Server should be topmost in the Search Order under the Authentication and Contacts field. Bind your clients first to the AD and then the OD (make sure use for authentication and contacts are unchecked).
Browse the two nodes, add your groups and apply MCX in the usual way.
Does this help?
Tony -
2012 Essentials and Backup Domain Controllers
I understand that 2012 Essentials wants to be the domain controller but what happens if I install a second one on the same network/what is the option for a backup domain controller? Is it recommended to have one 2012E and one 2012S?
As far as I can find you can have a second "replica" domain controller, but you can only have one essentials box in the domain (so the replica would just be Windows Server standard), and that must be the master server, eg it must own the FSMO roles.
Check out
http://blogs.technet.com/b/sbs/archive/2007/10/04/debunking-the-myth-about-additional-domain-controllers-replica-dcs-in-an-sbs-domain.aspx which covers many of the limitations and requirements. It doesn't relate to 2012, but I believe the same rules still
apply. -
Location services are listed under MESH network unsupported features. There is a short notice only in Release Notes. I can't find any other more technical info about that. Did anybody make some tests? What does the unsupported mean? Is it absolutely impossible or it means low or unguaranted RSSI calculation accuracy?
I am interested in a presence monitoring. I want to install some exciters and use the MESH network for tag messages collection and transport only. No real RSSI calculation, only location data from tags reading and transporting to a MSE. Does anybody run this design?
Many thanks.
MirekHi Mirek
Thanks a lot for your answer. I have a lot of experience with RFID tracking and I will tell you that for that space (1000x500meters) and only having 10 APs, 50 meters accuracy is what you might expect, it had nothing to do with the fact that the beacons were transporte in the mesh network.
What I'm worried about is that Cisco's Release Notes indicate that LBS is not supported in mesh networks, but I'm not sure if they refer to only the 5 Ghz Backhaul network or any network at all (2,4 Ghz).
Thanks in any case, I will find out through my Cisco Channel.
Best regards
Juan
Maybe you are looking for
-
How can i get an icloud account?
need icloud account
-
Adobe Captivate has encountered a problem and needs to close. We are sorry for the inconvenience.
I am trying to use Adobe Captivate 5 and I am receiving this message when trying to open the application, "Adobe® Captivate® has encountered a problem and needs to close. We are sorry for the inconvenience." Can you explain how this issue can be reso
-
Hi everyone, this should be so easy, yet I am stuck. I have a form region with an item P110_VESSEL_ID. This item is a select list. It is based on the query: select distinct v.vessel_name, v.vessel_id from vessels vessels v, frequent_fishermen ff
-
Error loading operating system- windows xp/windows me
Hi, So, I have a Hp Pavillion 9715 desktop with windows xp professional and basically yesterday I turned on my computer and all it would do would go to the black screen saying "error loading operating system" Now I'm not really sure what tp do I was
-
URGENT: Smartform - Attaching Font to Device Type and Printing
Hello Smarform Gurus, I have uploaded CORPOS font to SAP and using in SMARTFORMS. Whenever the PDF is called for invoice, it should print immediately. When I open the smartform and then print, the printout is coming fine with CORPOS font. Problem: Wh