Message class - SE91

Good afternoon,
How can I view a message via transaction SE91 without knowing the message class?
Thank you.
Kind regards,
Linda

hi
while u enetering in to message class it ask for message class name. u can search using the F4 help present.
r u can refer to the table T100, T100T for it.

Similar Messages

Can I use message class(from se91) in BSP applications

Hi,
Can I use message from message class(se91) to display in pages of BSP application.
Best Regards
Rayudu

Hi,
Thanks for response.
How can I get se91 message in onInput processing?
I understand that for long texts i can use OTR texts. Weather I need to maintain OTR texts for simple error messages?
Best Regrads
Rayudu

Message Class Versions

Hi Experts,
How can i check the versions of the message class(Se91)?
I need to check if a particular message class is existing or not in other system(QA) for which i DO NOT have access.
Pls suggest.
Thanks
Ricky

Ricky : You can try in one way. You can try by finding the TR's involved for the message objects.
Goto Se03 and try with search for objects in Requests and F8. In the next screen you can specify the Prog ID & Obj ID
for eg: R3TR MSAG ..etc and give the name of the messge class you are trying to find.
If previous transport exist, it will bring up that one in the next screen. You can thereafter goto that TR and check the message logs of the Message class exits in that TR version.
thanks
Hari K Ganti

Read message form message class

HI All
i want to read message from message class (SE91) into my variable
there is a way to get it without raise a message?
just to read it to some variable and proceed with the program flow .
Regards
James

Hi James,
You can capture the message of SE91 with function module 'FORMAT_MESSAGE' .
Example:
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id     = i_message-msgid
lang = i_message-msgspra
no   = i_message-msgnr
v1   = i_message-msgv1
v2   = i_message-msgv2
IMPORTING
msg = g_msg
EXCEPTIONS
OTHERS = 0.
Regards,
Moqeeth.

Unknowingly a message class "C2" (standard class) was deleted from SE91

Dear All,
Unknowingly a message class "C2" (standard message class) was deleted from SE91 trnsaction in development client, subsequently I have reinstated from Quality system, however the original language has become En insted of DE.
So please suggest the procedure to reinstate the same in development system.
Does it have any impact on hot patch application.
Thanks,
Kumar.

Hello,
You have posted a question that is related to system transports. Unfortunately this category is not related to these kind of questions. SAP TM deals with logistics in the real world - moving pallets, containers, loading trucks, etc.
To learn more about SAP TM please visit [http://service.sap.com/scm-tm|http://service.sap.com/scm-tm]
Therefore I will now move this thread to the category Software Logistics. Thank you for your understanding.
Kind regards,
Nico van Os.

Transport Class Messages from SE91

Hi gurus;
One question: For the IP we had created some messages assign to one class message em SE91 transaction. But now I don't know how can I transport it to the productive system.
Can any one help?
Regards;
Ricardo

Hello Ricardo,
You can try this:
- Enter t-code SE03
- Choose 'Include Objects in a Transport Request'
- In 'Selections by type and name', choose radio button 'Selected Obejcts'.
- There, click on checkbox at empty line.
- In the first input field available (2nd of the column), enter MSAG if you want to transport a message class, or MESS if you want to transport a message class number
- In the input field at right, type your class name, or type your class name+message number concatenated (ex: if class is ZTSCPM and message number is 003, then type ZTSCPM003).
- Execute, and then hit 'In Request', and create the request.
Kind regards.
Bruno

Issue in maintaining Long Text in Message Class

Hi
For Note implementation 1413492, I have to maintain long text, when I click on Long Text , I get a pop-up Create Modification , with 2 options for Template Type (1) Original Text (2) Template (With Headers)
Can anyone let me know how to proceed further, whatever name I give for the Modification, I am getting Error Message saying 'Enhancement Name violates the namespace convention (Note 989653)', I have tried unchecking the Self Explanatory check box as well, but still I get the same error message.
Below is the Long text I have to maintain class FR, message number 533
7. Create new error messages in the message class FR:
Call transaction SE91, enter the message class FR, and choose "Display" and
then "Change". Enter the following new messages:
Message Message short text:
533 Error while calling RFC destination
534 Contract Accounts Receivable and Payable is not installed in the
system
535 For company code & there were & data records transferred from
FI-CA
536 Error during data transfer from FI-CA for company code &; error
text:
Set the "Self-explanat'y" indicator for messages 535 and 536.
Enter a long text for messages 533 and 534:
Long text FR 533:
CAUSE
An error occurred when testing the RFC connection to Contract Accounts
Receivable and Payable. The message text is:
&V1&&V2&&V3&
SYS_ADMIN
Check the settings of the RFC destination &V4&.

Hi Ryan,
Extract from note 989653;
Note:
The name of the modification object must start with:
o 'Z'/'Y', or
o the customer namespace available in the system (TRNSPACE table).
Otherwise, message 645 will appear because the SAP namespace is not
permitted.
My suggestion would be to start the name with a Z.
Regards,
Nick

What is '&' used in message class

Hi,
What is '&' used in message class with the message no in SE91.
Give me details idea on this.
Best Regards,
Chini

If you use '&' operator in your message, then you can pass the text/literals whatever you want to get display in the message.
For example,
In a message clase zmsg, there is a message like this...
018 Table & not exist
you can call this message from your program by passsnig the table name in to this message...
For example,
ztablename = 'BUT000'.
Message e018(zmsg) with ztablename.
Filling Message Texts Dynamically *
Message texts in table T100 can contain up to four ampersand characters (&) as placeholders. You can replace these at runtime using the WITH addition in the MESSAGE statement:
MESSAGE ... WITH f1 ... f4.
The contents of fields f1 ... f4 are then inserted sequentially into the message text in place of the placeholders.

Actually i have one doubt in message class

Actually i have one doubt in message class. I want create message for following logic.
If the records already exits in database table ,
whatever input i will given in input fields like entry type and material no ,it will need in message.
i want rise the error message in my code like "Record entry type B Material no 029585888 already exits in database table".
I done the coding like.........
in SE80.
    IF sy-subrc = 0.
      MESSAGE e039 with zdbt-enttyp
                        zdbt-matnr.
    ENDIF.
in SE91.
Record entry type &1 Location &2 already exits in database table.
is it correct? it s not working properly..
could you advice me.......

Hello Raju
The only possible problem I see is that in your report you send a message of the wrong message class. Assuming that your message class is ZMSG then assure that your report begins with:
REPORT zreport MESSAGE-ID zmsg.
IF sy-subrc = 0.
MESSAGE e039 with zdbt-enttyp
zdbt-matnr.
ENDIF.
Regards
Uwe

HOW TO CREATE "MESSAGE CLASS"?

HELLO EXPERTS,
 Hereby, I post my another very simple but very important query.
 I have to make "message class". But I do not know the tracsaction code, procedure and other require syntax.
 Kindly, explain me the ENTIRE PROCEDURE.
 Thanks!!

You create and edit Message Class using Transaction SE91. Once you have created a message, you can use it in the MESSAGE statement in a program.
All messages are stored in table T100.
Creating Message Classes
To create a new message class from the ABAP Editor:
 1. In the initial statement (for example, REPORT) or directly in the statement MESSAGE ID <id> enter a parameter value of up to 20 characters as a message ID, for example:
 REPORT <name> MESSAGE-ID <message class>.
 Messages are stored system-wide. The chosen message ID (message class) must not already exist in the system.
 2. Double-click the message ID.
 If you enter an ID that already exists in the system, the system calls up Message maintenance. In this case, enter a different ID. Once you have done this, the system asks you whether you want to create a new message class.
 3. Choose Yes.
 The system calls up Message maintenance.
 4. Enter a brief description of the class in Short text.
 5. Choose Save.

Can I delete message in SE91 ?

Hello,
I want to delete two messages in SE91 because some warning appear in the reporting. The class message is RSUOM.
Can i do it in the SE91 transaction?
I know I can do it in each Bex Query in the RSRT transaction, but we can change this option in RSRT in the production system.
Thanks in advance.
Regards,
DP

i dont think you can delete the Standard SAp method...refer this for alternative Message Deletion

Is it Advicable to modify standard message class?

Hi Experts,
I need a small confirmation.Is modifying standard message class is having any restrictions?
Currently in SE91 message class number 002 i need to modify text .Is it ok to directly do and transport or need to take any extra precautions?
Regards
sas

Hi Thomas,
Thanks for the suggestion.
Actually message class name: HRTIMOOREC.
In that one message always shows what ever leave action is it shows as 'Number of days leave 5. Apply sick leave for HR'.
Requirement is just to remove 'Apply Sick Leave for HR'.
so that it wont confuse the clients who are applying for some other leaves..so request is to just modify
that number 001.
So in general need to modify SAP programs we required Access keys here its not required i guess...
Now Thomas is there any things need to taken care or general Message class how we do the same and Transfer? Thanks
Regards
sas

What is meant by self explanatory in message class

hi gurus,
what is meant by self explanatory in message class?
why it is used for?
ASAP

Hello,
Creating a Message Long Text
Use
Create a long text whenever the message text itself is not fully self-explanatory.
Prerequisites
You must already have created the message for which you want to create the long text, and not flagged it as self-explanatory.
Procedure
To enter a long text for a message in the message maintenance transaction (SE91):
Position the cursor on the relevant message.
Choose Individual maint.
The message text appears highlighted.
Choose Long text.
The SAPscript editor appears.
Enter your long text.
Check the text.
Save the text.
Result
When you send a message that has a long text, the message is displayed with a yellow question mark symbol.
Depending on the SAPgui settings, the message is displayed:
In the status bar (at the end of the message area),
In the message dialog box (on the Help pushbutton).
If you then click the message line or the Help pushbutton, the long text is displayed.
Vasanth

Message class creation

Can any body tell me how to creat message class and also the message numbers in the class.
like in message class F2 the message number is 273 for giving error message if find the same VAT registration number during creation of customer master.
Rgds.
Laxmikanta Das.

Hi Das
F2 is standard message class. Dont change the standard. (SE91) Copy the F2 into Z.... Save the new message class. Inside the message class,Message number 000 to 999 is display. Here add your own messages.
Shobana
Edited by: shobana V on Jan 17, 2008 9:10 AM

Message class for message id

Hi,
Can you please tell me how to create message text for existing message class
Thanks
Ali

Hi,
Goto SE91
Enter Message Class name.
Select Attributes Radiobutton
Click Change button
One popup window will come for original or logon language.
click on your choice.
change the text and save.
And for Changing or adding new messages in it Select messages tab.
do the above process again
Is this is your requirement

Message class - SE91

Similar Messages

Maybe you are looking for